On the Condition Monitoring of Induction machines

The research of condition monitoring of electric motors has been wide for several decades. The research and development at universities and in industry has provided means for the predictive condition monitoring. Many different devices and systems are developed and are widely used in industry, transportation and in civil engineering. In addition, many methods are developed and reported in scientific arenas in order to improve existing methods for the automatic analysis of faults. The methods, however, are not widely used as a part of condition monitoring systems. The main reasons are, firstly, that many methods are presented in scientific papers but their performance in different conditions is not evaluated, secondly, the methods include parameters that are so case specific that the implementation of a systemusing such methods would be far from straightforward. In this thesis, some of these methods are evaluated theoretically and tested with simulations and with a drive in a laboratory. A new automatic analysis method for the bearing fault detection is introduced. In the first part of this work the generation of the bearing fault originating signal is explained and its influence into the stator current is concerned with qualitative and quantitative estimation. The verification of the feasibility of the stator current measurement as a bearing fault indicatoris experimentally tested with the running 15 kW induction motor. The second part of this work concentrates on the bearing fault analysis using the vibration measurement signal. The performance of the micromachined silicon accelerometer chip in conjunction with the envelope spectrum analysis of the cyclic bearing faultis experimentally tested. Furthermore, different methods for the creation of feature extractors for the bearing fault classification are researched and an automatic fault classifier using multivariate statistical discrimination and fuzzy logic is introduced. It is often important that the on-line condition monitoring system is integrated with the industrial communications infrastructure. Two types of a sensor solutions are tested in the thesis: the first one is a sensor withcalculation capacity for example for the production of the envelope spectra; the other one can collect the measurement data in memory and another device can read the data via field bus. The data communications requirements highly depend onthe type of the sensor solution selected. If the data is already analysed in the sensor the data communications are needed only for the results but in the other case, all measurement data need to be transferred. The complexity of the classification method can be great if the data is analysed at the management level computer, but if the analysis is made in sensor itself, the analyses must be simple due to the restricted calculation and memory capacity.

Performance analysis of software run-time behaviour using 3D-visualisation

Monimutkaisen tietokonejärjestelmän suorituskykyoptimointi edellyttää järjestelmän ajonaikaisen käyttäytymisen ymmärtämistä. Ohjelmiston koon ja monimutkaisuuden kasvun myötä suorituskykyoptimointi tulee yhä tärkeämmäksi osaksi tuotekehitysprosessia. Tehokkaampien prosessorien käytön myötä myös energiankulutus ja lämmöntuotto ovat nousseet yhä suuremmiksi ongelmiksi, erityisesti pienissä, kannettavissa laitteissa. Lämpö- ja energiaongelmien rajoittamiseksi on kehitetty suorituskyvyn skaalausmenetelmiä, jotka edelleen lisäävät järjestelmän kompleksisuutta ja suorituskykyoptimoinnin tarvetta. Tässä työssä kehitettiin visualisointi- ja analysointityökalu ajonaikaisen käyttäytymisen ymmärtämisen helpottamiseksi. Lisäksi kehitettiin suorituskyvyn mitta, joka mahdollistaa erilaisten skaalausmenetelmien vertailun ja arvioimisen suoritusympäristöstä riippumatta, perustuen joko suoritustallenteen tai teoreettiseen analyysiin. Työkalu esittää ajonaikaisesti kerätyn tallenteen helposti ymmärrettävällä tavalla. Se näyttää mm. prosessit, prosessorikuorman, skaalausmenetelmien toiminnan sekä energiankulutuksen kolmiulotteista grafiikkaa käyttäen. Työkalu tuottaa myös käyttäjän valitsemasta osasta suorituskuvaa numeerista tietoa, joka sisältää useita oleellisia suorituskykyarvoja ja tilastotietoa. Työkalun sovellettavuutta tarkasteltiin todellisesta laitteesta saatua suoritustallennetta sekä suorituskyvyn skaalauksen simulointia analysoimalla. Skaalausmekanismin parametrien vaikutus simuloidun laitteen suorituskykyyn analysoitiin.

On Effort Estimation in Software Projects

Software engineering is criticized as not being engineering or 'well-developed' science at all. Software engineers seem not to know exactly how long their projects will last, what they will cost, and will the software work properly after release. Measurements have to be taken in software projects to improve this situation. It is of limited use to only collect metrics afterwards. The values of the relevant metrics have to be predicted, too. The predictions (i.e. estimates) form the basis for proper project management. One of the most painful problems in software projects is effort estimation. It has a clear and central effect on other project attributes like cost and schedule, and to product attributes like size and quality. Effort estimation can be used for several purposes. In this thesis only the effort estimation in software projects for project management purposes is discussed. There is a short introduction to the measurement issues, and some metrics relevantin estimation context are presented. Effort estimation methods are covered quite broadly. The main new contribution in this thesis is the new estimation model that has been created. It takes use of the basic concepts of Function Point Analysis, but avoids the problems and pitfalls found in the method. It is relativelyeasy to use and learn. Effort estimation accuracy has significantly improved after taking this model into use. A major innovation related to the new estimationmodel is the identified need for hierarchical software size measurement. The author of this thesis has developed a three level solution for the estimation model. All currently used size metrics are static in nature, but this new proposed metric is dynamic. It takes use of the increased understanding of the nature of the work as specification and design work proceeds. It thus 'grows up' along with software projects. The effort estimation model development is not possible without gathering and analyzing history data. However, there are many problems with data in software engineering. A major roadblock is the amount and quality of data available. This thesis shows some useful techniques that have been successful in gathering and analyzing the data needed. An estimation process is needed to ensure that methods are used in a proper way, estimates are stored, reported and analyzed properly, and they are used for project management activities. A higher mechanism called measurement framework is also introduced shortly. The purpose of the framework is to define and maintain a measurement or estimationprocess. Without a proper framework, the estimation capability of an organization declines. It requires effort even to maintain an achieved level of estimationaccuracy. Estimation results in several successive releases are analyzed. It isclearly seen that the new estimation model works and the estimation improvementactions have been successful. The calibration of the hierarchical model is a critical activity. An example is shown to shed more light on the calibration and the model itself. There are also remarks about the sensitivity of the model. Finally, an example of usage is shown.

Nursing student-patient relationship and associated factors

The purpose of this study was to analyse the nursing student-patient relationship and factors associated with this relationship from the point of view of both students and patients, and to identify factors that predict the type of relationship. The ultimate goal is to improve supervised clinical practicum with a view to supporting students in their reciprocal collaborative relationships with patients, increase their preparedness to meet patients’ health needs, and thus to enhance the quality of patient care. The study was divided into two phases. In the first phase (1999-2005), a literature review concerning the student-patient relationship was conducted (n=104 articles) and semi-structured interviews carried out with nursing students (n=30) and internal medicine patients (n=30). Data analysis was by means of qualitative content analysis and Student-Patient Relationship Scales, which were specially developed for this research. In the second phase (2005-2007), the data were collected by SPR scales among nursing students (n=290) and internal medicine patients (n=242). The data were analysed statistically by SPSS 12.0 software. The results revealed three types of student-patient relationship: a mechanistic relationship focusing on the student’s learning needs; an authoritative relationship focusing on what the student assumes is in the patient’s best interest; and a facilitative relationship focusing on the common good of both student and patient. Students viewed their relationship with patients more often as facilitative and authoritative than mechanistic, while in patients’ assessments the authoritative relationship occurred most frequently and the facilitative relationship least frequently. Furthermore, students’ and patients’ views on their relationships differed significantly. A number of background factors, contextual factors and consequences of the relationship were found to be associated with the type of relationship. In the student data, factors that predicted the type of relationship were age, current year of study and support received in the relationship with patient. The higher the student’s age, the more likely the relationship with the patient was facilitative. Fourth year studies and the support of a person other than a supervisor were significantly associated with an authoritative relationship. Among patients, several factors were found to predict the type of nursing student-patient relationships. Significant factors associated with a facilitative relationship were university-level education, several previous hospitalizations, admission to hospital for a medical problem, experience of caring for an ill family member and patient’s positive perception of atmosphere during collaboration and of student’s personal and professional growth. In patients, positive perceptions of student’s personal and professional attributes and patient’s improved health and a greater commitment to self-care, on the other hand, were significantly associated with an authoritative relationship, whereas positive perceptions of one’s own attributes as a patient were significantly associated with a mechanistic relationship. It is recommended that further research on the student-patient relationship and related factors should focus on questions of content, methodology and education.

Are Evaluation of ICTs Investment Using Decision Support Systems:Case Applications from Distributor's and End User's Perspective Group Decision

The evaluation of investments in advanced technology is one of the most important decision making tasks. The importance is even more pronounced considering the huge budget concerning the strategic, economic and analytic justification in order to shorten design and development time. Choosing the most appropriate technology requires an accurate and reliable system that can lead the decision makers to obtain such a complicated task. Currently, several Information and Communication Technologies (ICTs) manufacturers that design global products are seeking local firms to act as their sales and services representatives (called distributors) to the end user. At the same time, the end user or customer is also searching for the best possible deal for their investment in ICT's projects. Therefore, the objective of this research is to present a holistic decision support system to assist the decision maker in Small and Medium Enterprises (SMEs) - working either as individual decision makers or in a group - in the evaluation of the investment to become an ICT's distributor or an ICT's end user. The model is composed of the Delphi/MAH (Maximising Agreement Heuristic) Analysis, a well-known quantitative method in Group Support System (GSS), which is applied to gather the average ranking data from amongst Decision Makers (DMs). After that the Analytic Network Process (ANP) analysis is brought in to analyse holistically: it performs quantitative and qualitative analysis simultaneously. The illustrative data are obtained from industrial entrepreneurs by using the Group Support System (GSS) laboratory facilities at Lappeenranta University of Technology, Finland and in Thailand. The result of the research, which is currently implemented in Thailand, can provide benefits to the industry in the evaluation of becoming an ICT's distributor or an ICT's end user, particularly in the assessment of the Enterprise Resource Planning (ERP) programme. After the model is put to test with an in-depth collaboration with industrial entrepreneurs in Finland and Thailand, the sensitivity analysis is also performed to validate the robustness of the model. The contribution of this research is in developing a new approach and the Delphi/MAH software to obtain an analysis of the value of becoming an ERP distributor or end user that is flexible and applicable to entrepreneurs, who are looking for the most appropriate investment to become an ERP distributor or end user. The main advantage of this research over others is that the model can deliver the value of becoming an ERP distributor or end user in a single number which makes it easier for DMs to choose the most appropriate ERP vendor. The associated advantage is that the model can include qualitative data as well as quantitative data, as the results from using quantitative data alone can be misleading and inadequate. There is a need to utilise quantitative and qualitative analysis together, as can be seen from the case studies.

Informing patients about limits to confidentiality: A qualitative study in prisons.

AIM: Confidentiality is important in healthcare practice, however, under certain circumstances, confidentiality is breached. In this paper, mental health professionals' (MHPs) practices related to informing imprisoned patients about confidentiality and its limits are presented. METHODS: Twenty-four MHPs working in Swiss prisons were interviewed. Data analysis involved qualitative thematic coding and was validated by discussing results with external experts and study participants. RESULTS: For expert evaluations and court-ordered therapies, participants informed patients that information revealed during these consultations is not bound by confidentiality rules. The practice of routinely informing patients about confidentiality and its limits became more complex in voluntary therapies, for which participants described four approaches and provided justifications in favour of or against their use. CONCLUSIONS: Further training and continued education are needed to improve physicians' ethical and legal knowledge about confidentiality disclosures. In order to promote ethical practices, it is important to understand and address existing motivations, attitudes and behaviours that impede appropriate patient information. Our study adds important new knowledge about the limits to confidentiality, particularly for providers working with vulnerable populations. Results from this study reflect typical ethical and practical dilemmas faced by and of interest to physicians working in forensic medicine and other related settings.

Monikappalesysteemin esikäsittelijä kaupallisessa ympäristössä

Työn tavoitteena oli tehdä monikappalesysteemin esikäsittelijä, joka toimii CAD-ohjelmiston yhteydessä. CAD-ohjelmistoksi valittiin SolidWorks-ohjelmisto. Esikäsittelijästä tehtiin yhteensopiva monikappaledynamiikan simulointi ohjelmiston kanssa, joka on kehitetty Lappeenrannan teknillisessä yliopistossa. Aikaansaadun esikäsittelijän avulla pystytään tuottamaan monikappaledynamiikan simuloinnissa tarvittavat lähtötiedot. Lähtötiedot esikäsittelijä laskee käyttäjän tekemästä kokoonpanokuvasta ja käyttäjän antamista tiedoista. Esikäsittelijän toiminta verifioitiin kaupallisin simulointiohjelmisto ADAMS:n avulla. Esikäsittelijän todettiin toimivan luotettavasti ja täyttävän sille asetetut vaatimukset. Lisäksi esikäsittelijän todettiin nopeuttavan huomattavasti simulointimallien tekoa.

Kannattavuusraportoinnin laadun arviointi data warehouse ratkaisussa Case: Paperiteollisuuden myynnin ja asiakaspalvelun tietojärjestelmä

Tutkielman tavoitteena oli selvittää, onko tutkielman tilaajan toteuttaman kannattavuusraportoinnin laatu käyttäjien mielestä riittävä. Kannattavuusraportointi on toteutettu data warehouse tekniikalla. Tutkielman tavoitteina oli myös määrittää, mitä ohjelmiston laatu tarkoittaa ja miten sitä voidaan arvioida. Tutkimuksessa käytettiin kvalitatiivista tutkimusmenetelmää. Laadun arviointiin käytetty aineisto kerättiin haastattelemalla seitsemäätoista kannattavuusraportoinnin aktiivikäyttäjää. Tutkielmassa ohjelmiston laatu tarkoittaa sen kykyä täyttää tai ylittää käyttäjiensä kohtuulliset toiveet ja odotukset. Laatua arvioitiin standardin ISO/IEC 9126 määrittelemällä kuudella laatuominaisuudella, jotka kuvaavat minimaalisella päällekkäisyydellä ohjelmiston laadun. Lisäksi arvioinnissa hyödynnettiin varsinaiseen standardiin kuulumatonta informatiivista liitettä, joka tarkentaa ISO/IEC 9126 standardissa esitettyjä laadun ominaispiirteitä. Tutkimuksen tuloksena voidaan todeta, että käyttäjien mukaan kannattavuusraportointi on tarpeeksi laadukas, sillä se pystyy tarjoamaan helppokäyttöisiä, oikeanmuotoisia raportteja riittävän hyvällä vasteajalla käyttäjien tarpeisiin. Tehokkaasta hyödyntämisestä voidaan päätellä data warehousen rakentamisen onnistuneen. Tutkimuksessa nousi esiin myös runsaasti kehittämis- ja parannusideoita, jotka toimivat yhtenä kehitystyön apuvälineenä tulevaisuudessa.

Market Orientation in Rapidly Internationalizing Small Companies — Evidence from the Software Industry

For more than a decade, researchers have been aware of the increased pace of small-firm internationalization and the greater effect of these rapidly growing small businesses on the wealth, international trade, and job-creation opportunities of countries. Due to the small size of the home market, Finnish companies have been generally considered highly interested in internationalization. One particular domain in which rapid internationalization has been considered feasible is the global software business, with its knowledge-intensive nature and high growth potential. However, over time the failure rate of small entrepreneurial firms has remained especially high in high-technology markets. One of the reasons for this seems to lie in the fact that these companies are often formed by people with a strong technological background but limited competences in other areas. Further, research on the marketing capabilities of rapidly internationalizing high-tech firms has been scarce thus far. In addition, while there is much research on the first years of operations of rapidly internationalizing companies, it is not well known what becomes of them later on. Therefore, there is a need for more investigation into the managerial mindset, competences and decision-making in these small companies, especially from the perspective of how they acquire and exploit market knowledge, and enhance their networking capabilities in order to promote international expansion. The present study focuses on market orientation in small software firms that internationalize their operations rapidly in global software markets. It builds on qualitative data to illustrate how these companies develop their market-oriented product-market strategies during the process of increasing international commitment. It also shows how they manage their network relationships in order to be able to offer better customer service and to thrive in the fierce global competition. The study was conducted in the empirical context of Finnish small software companies, and the main data consists of interviews with top managers in these businesses. The interviews were designed to cover a minimum period of five years of the company's international operations, thus offering a retrospective in-depth perspective on market orientation, internationalization and partnerships in the given context. One particular focus is on less successfully internationalized software companies, and the challenges they face when approaching international markets. This study makes a significant contribution to the literature on market orientation for several reasons. First, building on data from the software industry, it clarifies the existing theory in the context of rapid internationalization and network relationships. Secondly, it provides a good body of evidence on market orientation in both successfully and less successfully internationalized companies, and identifies the key related differences between the two company groups. Thirdly, it highlights the importance of inter-firm networks in the rapid internationalization of small software firms, providing companies with important market knowledge and, in some cases, management challenges. Fourthly, this investigation clarifies market orientation in the context of different software-product strategies, thus, combining the perspectives of market orientation in both manufacturing and services. In sum, the results of the study are significant for both small software firms and public-policy makers since they shed light on the market-oriented managerial mindset and the market-information gathering and sharing processes that are needed in successful rapid internationalization.

Comparison of Inoculation with the InoqulA and WASP Automated Systems with Manual Inoculation.

The quality of sample inoculation is critical for achieving an optimal yield of discrete colonies in both monomicrobial and polymicrobial samples to perform identification and antibiotic susceptibility testing. Consequently, we compared the performance between the InoqulA (BD Kiestra), the WASP (Copan), and manual inoculation methods. Defined mono- and polymicrobial samples of 4 bacterial species and cloudy urine specimens were inoculated on chromogenic agar by the InoqulA, the WASP, and manual methods. Images taken with ImagA (BD Kiestra) were analyzed with the VisionLab version 3.43 image analysis software to assess the quality of growth and to prevent subjective interpretation of the data. A 3- to 10-fold higher yield of discrete colonies was observed following automated inoculation with both the InoqulA and WASP systems than that with manual inoculation. The difference in performance between automated and manual inoculation was mainly observed at concentrations of >10(6) bacteria/ml. Inoculation with the InoqulA system allowed us to obtain significantly more discrete colonies than the WASP system at concentrations of >10(7) bacteria/ml. However, the level of difference observed was bacterial species dependent. Discrete colonies of bacteria present in 100- to 1,000-fold lower concentrations than the most concentrated populations in defined polymicrobial samples were not reproducibly recovered, even with the automated systems. The analysis of cloudy urine specimens showed that InoqulA inoculation provided a statistically significantly higher number of discrete colonies than that with WASP and manual inoculation. Consequently, the automated InoqulA inoculation greatly decreased the requirement for bacterial subculture and thus resulted in a significant reduction in the time to results, laboratory workload, and laboratory costs.

Who's fault is it ? : An analysis of the press coverage of football betting scandals in France and the United Kingdom

Sport betting is a lucrative business for bookmakers, for the lucky (or wise) punters, but also for governments and for sport. While not new or even recent, the deviances linked to sport betting, primarily match-fixing, have gained increased media exposure in the past decade. This exploratory study is a qualitative content analysis of the press coverage of sport betting-related deviances in football in two countries (UK and France), using in each case two leading national publications over a period of five years. Data analysis indicates a mounting coverage of sport betting scandals, with teams, players and criminals increasingly framed as culprits, while authorities and federations primarily assume a positive role. As for the origin of sport betting deviances, French newspapers tend to blame the system (in an abstract way); British newspapers, in contrast, focus more on individual weaknesses, notably greed. This article contributed to the growing body of literature on the importance of these deviances and on the way they are perceived by sport organizations, legislators and the public at large.

O6-Methylguanine-DNA methyltransferase protein expression by immunohistochemistry in brain and non-brain systemic tumours: systematic review and meta-analysis of correlation with methylation-specific polymerase chain reaction

Background: The DNA repair protein O6-Methylguanine-DNA methyltransferase (MGMT) confers resistance to alkylating agents. Several methods have been applied to its analysis, with methylation-specific polymerase chain reaction (MSP) the most commonly used for promoter methylation study, while immunohistochemistry (IHC) has become the most frequently used for the detection of MGMT protein expression. Agreement on the best and most reliable technique for evaluating MGMT status remains unsettled. The aim of this study was to perform a systematic review and meta-analysis of the correlation between IHC and MSP. Methods A computer-aided search of MEDLINE (1950-October 2009), EBSCO (1966-October 2009) and EMBASE (1974-October 2009) was performed for relevant publications. Studies meeting inclusion criteria were those comparing MGMT protein expression by IHC with MGMT promoter methylation by MSP in the same cohort of patients. Methodological quality was assessed by using the QUADAS and STARD instruments. Previously published guidelines were followed for meta-analysis performance. Results Of 254 studies identified as eligible for full-text review, 52 (20.5%) met the inclusion criteria. The review showed that results of MGMT protein expression by IHC are not in close agreement with those obtained with MSP. Moreover, type of tumour (primary brain tumour vs others) was an independent covariate of accuracy estimates in the meta-regression analysis beyond the cut-off value. Conclusions Protein expression assessed by IHC alone fails to reflect the promoter methylation status of MGMT. Thus, in attempts at clinical diagnosis the two methods seem to select different groups of patients and should not be used interchangeably.

A Three-Level Approach for Analyzing User Behavior in Ongoing Relationships

Peer-reviewed

Real-Time Simulation of Mobile and Industrial Machines Using the Multibody Simulation Approach

This thesis introduces a real-time simulation environment based on the multibody simulation approach. The environment consists of components that are used in conventional product development, including computer aided drawing, visualization, dynamic simulation and finite element software architecture, data transfer and haptics. These components are combined to perform as a coupled system on one platform. The environment is used to simulate mobile and industrial machines at different stages of a product life time. Consequently, the demands of the simulated scenarios vary. In this thesis, a real-time simulation environment based on the multibody approach is used to study a reel mechanism of a paper machine and a gantry crane. These case systems are used to demonstrate the usability of the real-time simulation environment for fault detection purposes and in the context of a training simulator. In order to describe the dynamical performance of a mobile or industrial machine, the nonlinear equations of motion must be defined. In this thesis, the dynamical behaviour of machines is modelled using the multibody simulation approach. A multibody system may consist of rigid and flexible bodies which are joined using kinematic joint constraints while force components are used to describe the actuators. The strength of multibody dynamics relies upon its ability to describe nonlinearities arising from wearing of the components, friction, large rotations or contact forces in a systematic manner. For this reason, the interfaces between subsystems such as mechanics, hydraulics and control systems of the mechatronic machine can be defined and analyzed in a straightforward manner.

Automatic evaluation and data generation for analytical chemistry instrumental analysis exercises

In general, laboratory activities are costly in terms of time, space, and money. As such, the ability to provide realistically simulated laboratory data that enables students to practice data analysis techniques as a complementary activity would be expected to reduce these costs while opening up very interesting possibilities. In the present work, a novel methodology is presented for design of analytical chemistry instrumental analysis exercises that can be automatically personalized for each student and the results evaluated immediately. The proposed system provides each student with a different set of experimental data generated randomly while satisfying a set of constraints, rather than using data obtained from actual laboratory work. This allows the instructor to provide students with a set of practical problems to complement their regular laboratory work along with the corresponding feedback provided by the system's automatic evaluation process. To this end, the Goodle Grading Management System (GMS), an innovative web-based educational tool for automating the collection and assessment of practical exercises for engineering and scientific courses, was developed. The proposed methodology takes full advantage of the Goodle GMS fusion code architecture. The design of a particular exercise is provided ad hoc by the instructor and requires basic Matlab knowledge. The system has been employed with satisfactory results in several university courses. To demonstrate the automatic evaluation process, three exercises are presented in detail. The first exercise involves a linear regression analysis of data and the calculation of the quality parameters of an instrumental analysis method. The second and third exercises address two different comparison tests, a comparison test of the mean and a t-paired test.