Nuove sonde fluorescenti per lo studio e la quantificazione del magnesio totale intracellulare

Sebbene il magnesio sia essenziale per la maggior parte dei processi biologici, si conosce ancora poco sulla sua distribuzione e compartimentalizzazione intracellulare, soprattutto a causa dell’inadeguatezza delle tecniche attualmente disponibili. Per questo motivo, particolare interesse ha recentemente suscitato una famiglia di molecole fluorescenti, diaza-18-crown-6 8-idrossichinoline (DCHQ1 e suoi derivati), che mostrano un’alta specificità e affinità per il magnesio (superiore a quella delle sonde commerciali), che consente di mappare il magnesio totale intracellulare. L’approccio sintetico alle molecole DCHQ è stato ottimizzato mediante riscaldamento alle microonde: con questa nuova metodica è stato possibile sintetizzare una famiglia di derivati con caratteristiche di fluorescenza, uptake, ritenzione e localizzazione intracellulare potenziate rispetto alla capostipite DCHQ1. Il derivato acetometossi estere (DCHQ3), idrolizzato dalle esterasi cellulari, ha mostrato un miglior uptake e ritenzione intracellulare; le lunghe catene laterali alchiliche della sonda DCHQ4, invece, hanno conferito a questo derivato maggiore lipofilicità e, di conseguenza, maggiore affinità per le membrane; con l’inserimento di gruppi laterali aromatici, infine, si sono ottenute due sonde (DCHQ5 e DCHQ6) molto fluorescenti e altamente ritenute all’interno delle cellule anche dopo i lavaggi. Il derivato fenilico DCHQ5 si è dimostrato, inoltre, utilizzabile anche per saggi fluorimetrici quantitativi del magnesio totale in campioni cellulari molto piccoli; in più, grazie all’alta ritenzione cellulare, è stato usato per monitorare e quantificare l’efflusso di magnesio attraverso la membrana plasmatica in risposta a stimolazione con cAMP. I risultati presentati in questa tesi mostrano che i DCHQ-derivati potranno rappresentare in futuro uno strumento versatile per lo studio della distribuzione e dell’omeostasi del magnesio cellulare. In particolare la sonda DCHQ5 ha mostrato l’ulteriore peculiarità di essere eccitabile sia nell’UV che nel visibile, e potrebbe essere quindi utilizzata con successo in un’ampia varietà di misure di fluorescenza, fornendo un contributo importante per la comprensione del ruolo di questo importante elemento.

Urban water demand model: the case study of Emilia Romagna (Italy)

Water is the driving force in nature. We use water for washing cars, doing laundry, cooking, taking a shower, but also to generate energy and electricity. Therefore water is a necessary product in our daily lives (USGS. Howard Perlman, 2013). The model that we created is based on the urban water demand computer model from the Pacific Institute (California). With this model we will forecast the future urban water use of Emilia Romagna up to the year of 2030. We will analyze the urban water demand in Emilia Romagna that includes the 9 provinces: Bologna, Ferrara, Forli-Cesena, Modena, Parma, Piacenza, Ravenna, Reggio Emilia and Rimini. The term urban water refers to the water used in cities and suburbs and in homes in the rural areas. This will include the residential, commercial, institutional and the industrial use. In this research, we will cover the water saving technologies that can help to save water for daily use. We will project what influence these technologies have to the urban water demand, and what it can mean for future urban water demands. The ongoing climate change can reduce the snowpack, and extreme floods or droughts in Italy. The changing climate and development patterns are expected to have a significant impact on water demand in the future. We will do this by conducting different scenario analyses, by combining different population projections, climate influence and water saving technologies. In addition, we will also conduct a sensitivity analyses. The several analyses will show us how future urban water demand is likely respond to changes in water conservation technologies, population, climate, water price and consumption. I hope the research can contribute to the insight of the reader’s thoughts and opinion.

Validation of a new method to assess the long-term Hypothalamic-Pituitary-Adrenal Activity using hair glucocorticoids as biomarkers. - Studies on pigs and laboratory Sprague-Dawley Rats

The evaluation of chronic activity of the hypothalamic-pituitary-adrenal (HPA) axis is critical for determining the impact of chronic stressful situations. The potential use of hair glucocorticoids as a non-invasive, retrospective, biomarker of long term HPA activity is of great interest, and it is gaining acceptance in humans and animals. However, there are still no studies in literature examining hair cortisol concentration in pigs and corticosterone concentration in laboratory rodents. Therefore, we developed and validated, for the first time, a method for measuring hair glucocorticoids concentration in commercial sows and in Sprague-Dawley rats. Our preliminary data demonstrated: 1) a validated and specific washing protocol and extraction assay method with a good sensitivity in both species; 2) the effect of the reproductive phase, housing conditions and seasonality on hair cortisol concentration in sows; 3) similar hair corticosterone concentration in male and female rats; 4) elevated hair corticosterone concentration in response to chronic stress manipulations and chronic ACTH administration, demonstrating that hair provides a good direct index of HPA activity over long periods than other indirect parameters, such adrenal or thymus weight. From these results we believe that this new non-invasive tool needs to be applied to better characterize the overall impact in livestock animals and in laboratory rodents of chronic stressful situations that negatively affect animals welfare. Nevertheless, further studies are needed to improve this methodology and maybe to develop animal models for chronic stress of high interest and translational value in human medicine.

Valutazione della mobilita' di contaminanti inorganici tramite test di cessione su matrici ambientali contaminate

La caratterizzazione di sedimenti contaminati è un problema complesso, in questo lavoro ci si è occupati di individuare una metodologia di caratterizzazione che tenesse conto sia delle caratteristiche della contaminazione, con analisi volte a determinare il contenuto totale di contaminanti, sia della mobilità degli inquinanti stessi. Una adeguata strategia di caratterizzazione può essere applicata per la valutazione di trattamenti di bonifica, a questo scopo si è valutato il trattamento di soil washing, andando ad indagare le caratteristiche dei sedimenti dragati e del materiale in uscita dal processo, sabbie e frazione fine, andando inoltre a confrontare le caratteristiche della sabbia in uscita con quelle delle sabbie comunemente usate per diverse applicazioni. Si è ritenuto necessario indagare la compatibilità dal punto di vista chimico, granulometrico e morfologico. Per indagare la mobilità si è scelto di applicare i test di cessione definiti sia a livello internazionale che italiano (UNI) e quindi si sono sviluppate le tecnologie necessarie alla effettuazione di test di cessione in modo efficace, automatizzando la gestione del test a pHstat UNI CEN 14997. Questo si è reso necessario a causa della difficoltà di gestire il test manualmente, per via delle tempistiche difficilmente attuabili da parte di un operatore. Le condizioni redox influenzano la mobilità degli inquinanti, in particolare l’invecchiamento all’aria di sedimenti anossici provoca variazioni sensibili nello stato d’ossidazione di alcune componenti, incrementandone la mobilità, si tratta quindi di un aspetto da considerare quando si individuano le adeguate condizioni di stoccaggio-smaltimento, si è eseguita a questo scopo una campagna sperimentale.

Selective oxidation of 5-hydroxymethylfurfural using monometallic and bimetallic supported nanoparticles

This work deals with the oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) using metal supported catalysts. Catalysts were prepared from the immobilisation of preformed monometallic (Au, Pd) and bimetallic (AuCu, AuPd) nanoparticles on commercial oxides (TiO2, CeO2). Au-TiO2 catalyst was found to be very active for HMF oxidation; however, this system deactivated very fast. For this reason, we prepared bimetallic gold-copper nanoparticles and an increase in the catalytic activity was observed together with an increase in catalyst stability. In order to optimise the interaction of the metal active phase with the support, Au and AuCu nanoparticles were supported onto CeO2. Au-CeO2 catalyst was found to be more active than the bimetallic one, leading to the conclusion that in this case the most important feature is the interaction between gold and the support. Catalyst pre-treatments (calcination and washing) were carried out to maximise the contact between the metal and the oxide and an increase in the FDCA production could be observed. The presence of ceria defective sites was crucial for FDCA formation. Mesoporous cerium oxide was synthesised with the hard template method and was used as support for Au nanoparticles to promote the catalytic activity. In order to study the role of active phase in HMF oxidation, PdAu nanoparticles were supported onto TiO2. Au and Pd monometallic catalysts were very active in the formation of HMFCA (5-hydroxymethyl-2-furan carboxylic acid), but Pd was not able to convert it, leading to a low FDCA yield. The calcination of PdAu catalysts led to Pd segregation on the particles surface, which changed the reaction pathway and included an important contribution of the Cannizzaro reaction. PVP protected PdAu nanoparticles, synthesised with different morphologies (core-shell and alloyed structure), confirmed the presence of a different reaction mechanism when the metal surface composition changes.

Safety by design: production of engineering surface modified nanomaterials

This PhD thesis focused on nanomaterial (NM) engineering for occupational health and safety, in the frame of the EU project “Safe Nano Worker Exposure Scenarios (SANOWORK)”. Following a safety by design approach, surface engineering (surface coating, purification process, colloidal force control, wet milling, film coating deposition and granulation) were proposed as risk remediation strategies (RRS) to decrease toxicity and emission potential of NMs within real processing lines. In the first case investigated, the PlasmaChem ZrO2 manufacturing, the colloidal force control applied to the washing of synthesis rector, allowed to reduce ZrO2 contamination in wastewater, performing an efficient recycling procedure of ZrO2 recovered. Furthermore, ZrO2 NM was investigated in the ceramic process owned by CNR-ISTEC and GEA-Niro; the spray drying and freeze drying techniques were employed decreasing NM emissivity, but maintaining a reactive surface in dried NM. Considering the handling operation of nanofibers (NFs) obtained through Elmarco electrospinning procedure, the film coating deposition was applied on polyamide non-woven to avoid free fiber release. For TiO2 NF the wet milling was applied to reduce and homogenize the aspect ratio, leading to a significant mitigation of fiber toxicity. In the Colorobbia spray coating line, Ag and TiO2 nanosols, employed to transfer respectively antibacterial or depolluting properties to different substrates, were investigated. Ag was subjected to surface coating and purification, decreasing NM toxicity. TiO2 was modified by surface coating, spray drying and blending with colloidal SiO2, improving its technological performance. In the extrusion of polymeric matrix charged with carbon nanotube (CNTs) owned by Leitat, the CNTs used as filler were granulated by spray drying and freeze spray drying techniques, allowing to reduce their exposure potential. Engineered NMs tested by biologists were further investigated in relevant biological conditions, to improve the knowledge of structure/toxicity mechanisms and obtain new insights for the design of safest NMs.

Investigation of P3HT PCBM particle-based solar cells

Die Herstellung von Polymer-Solarzellen aus wässriger Phase stellt eine attraktive Alternative zu der konventionellen lösemittelbasierten Formulierung dar. Die Vorteile der aus wässriger Lösung hergestellten Solarzellen liegen besonders in dem umweltschonenden Herstellungsprozess und in der Möglichkeit, druckbare optoelektronische Bauteile zu generieren. Die Prozessierbarkeit von hydrophoben Halbleitern im wässrigen Milieu wird durch die Dispergierung der Materialien, in Form von Nanopartikeln, erreicht. Der Transfer der Halbleiter in eine Dispersion erfolgt über die Lösemittelverdampfungsmethode. Die Idee der Verwendung von partikelbasierte Solarzellen wurde bereits umgesetzt, allerdings blieben eine genaue Charakterisierung der Partikel sowie ein umfassendes Verständnis des gesamten Fabrikationsvorgangs aus. Deshalb besteht das Ziel dieser Arbeit darin, einen detaillierten Einblick in den Herstellungsprozess von partikelbasierten Solarzellen zu erlangen, mögliche Schwächen aufzudecken, diese zu beseitigen, um so zukünftige Anwendungen zu verbessern. Zur Herstellung von Solarzellen aus wässrigen Dispersionen wurde Poly(3-hexylthiophen-2,5-diyl)/[6,6]-Phenyl-C61-Buttersäure-Methylester (P3HT/PCBM) als Donor/Akzeptor-System verwendet. Die Kernpunkte der Untersuchungen richteten sich zum einen die auf Partikelmorphologie und zum anderen auf die Generierung einer geeigneten Partikelschicht. Beide Parameter haben Auswirkungen auf die Solarzelleneffizienz. Die Morphologie wurde sowohl spektroskopisch über Photolumineszenz-Messungen, als auch visuell mittels Elektronenmikroskopie ermittelt. Auf diese Weise konnte die Partikelmorphologie vollständig aufgeklärt werden, wobei Parallelen zu der Struktur von lösemittelbasierten Solarzellen gefunden wurden. Zudem wurde eine Abhängigkeit der Morphologie von der Präparationstemperatur beobachtet, was eine einfache Steuerung der Partikelstruktur ermöglicht. Im Zuge der Partikelschichtausbildung wurden direkte sowie grenzflächenvermittelnde Beschichtungsmethoden herangezogen. Von diesen Techniken hatte sich aber nur die Rotationsbeschichtung als brauchbare Methode erwiesen, Partikel aus der Dispersion in einen homogenen Film zu überführen. Des Weiteren stand die Aufarbeitung der Partikelschicht durch Ethanol-Waschung und thermische Behandlung im Fokus dieser Arbeit. Beide Maßnahmen wirkten sich positiv auf die Effizienz der Solarzellen aus und trugen entscheidend zu einer Verbesserung der Zellen bei. Insgesamt liefern die gewonnen Erkenntnisse einen detaillierten Überblick über die Herausforderungen, welche bei dem Einsatz von wasserbasierten Dispersionen auftreten. Die Anforderungen partikelbasierter Solarzellen konnten offengelegt werden, dadurch gelang die Herstellung einer Solarzelle mit einer Effizienz von 0.53%. Dieses Ergebnis stellt jedoch noch nicht das Optimum dar und lässt noch Möglichkeiten für Verbesserungen offen.

Impianti di ripartizione di farmaci in asepsi e atmosfera controllata

Tesi in azienda che verte sugli impianti di ripartizione di farmaci in asepsi e atmosfera controllata. Sono stati analizzati: norme riguardanti progettazione e installazione di impianti farmaceutici; tecnologie di ripartizione (isolatori e RABS) con riferimento all'isolatore in azienda e all'impianto HVAC asservito; la linea di ripartizione in generale (washing machine - tunnel di depirogenazione - isolatore - coding station); test SAT di convalida per l'installazione di isolatore e impianto HVAC; sviluppo e convalida del ciclo di decontaminazione con VHP; conti di ottimizzazione dell'inertizzazione della camera di riempimento.

A cross cultural study of vaginal practices and sexuality: Implications for sexual health

Between 2005 and 2006, we investigated vaginal practices in Yogyakarta, Indonesia; Tete, Mozambique; KwaZulu-Natal, South Africa; and Bangkok and Chonburi, Thailand. We sought to understand women's practices, their motivations for use and the role vaginal practices play in women's health, sexuality and sense of wellbeing. The study was carried out among adult women and men who were identified as using, having knowledge or being involved in trade in products. Further contacts were made using snowball sampling. Across the sites, individual interviews were conducted with 229 people and 265 others participated in focus group discussions. We found that women in all four countries have a variety of reasons for carrying out vaginal practices whose aim is to not simply 'dry' the vagina but rather decrease moisture that may have other associated meanings, and that they are exclusively "intravaginal" in operation. Practices, products and frequency vary. Motivations generally relate to personal hygiene, genital health or sexuality. Hygiene practices involve external washing and intravaginal cleansing or douching and ingestion of substances. Health practices include intravaginal cleansing, traditional cutting, insertion of herbal preparations, and application of substances to soothe irritated vaginal tissue. Practices related to sexuality can involve any of these practices with specific products that warm, dry, and/or tighten the vagina to increase pleasure for the man and sometimes for the woman. Hygiene and health are expressions of femininity connected to sexuality even if not always explicitly expressed as such. We found their effects may have unexpected and even undesired consequences. This study demonstrates that women in the four countries actively use a variety of practices to achieve a desired vaginal state. The results provide the basis for a classification framework that can be used for future study of this complex topic.

Hair analysis for Delta9-tetrahydrocannabinolic acid A--new insights into the mechanism of drug incorporation of cannabinoids into hair

Differentiation between external contamination and incorporation of drugs or their metabolites from inside the body via blood, sweat or sebum is a general issue in hair analysis and of high concern when interpreting analytical results. In hair analysis for cannabinoids the most common target is Delta9-tetrahydrocannabinol (THC), sometimes cannabidiol (CBD) and cannabinol (CBN) are determined additionally. After repeated external contamination by cannabis smoke these analytes are known to be found in hair even after performing multiple washing steps. A widely accepted strategy to unequivocally prove active cannabis consumption is the analysis of hair extracts for the oxidative metabolite 11-nor-9-carboxy-THC (THC-COOH). Although the acidic nature of this metabolite suggests a lower rate of incorporation into the hair matrix compared to THC, it is not fully understood up to now why hair concentrations of THC-COOH are generally found to be much lower (mostly <10 pg/mg) than the corresponding THC concentrations. Delta9-Tetrahydrocannabinolic acid A (THCA A) is the preliminary end product of the THC biosynthesis in the cannabis plant. Unlike THC it is non-psychoactive and can be regarded as a 'precursor' of THC being largely decarboxylated when heated or smoked. The presented work shows for the first time that THCA A is not only detectable in blood and urine of cannabis consumers but also in THC positive hair samples. A pilot experiment performed within this study showed that after oral intake of THCA A on a regular basis no relevant incorporation into hair occurred. It can be concluded that THCA A in hair almost exclusively derives from external contamination e.g. by side stream smoke. Elevated temperatures during the analytical procedure, particularly under alkaline conditions, can lead to decarboxylation of THCA A and accordingly increase THC concentrations in hair. Additionally, it has to be kept in mind that in hair samples tested positive for THCA A at least a part of the 'non-artefact' THC probably derives from external contamination as well, because in condensate of cannabis smoke both THC and THCA A are present in relevant amounts. External contamination by side stream smoke could therefore explain the great differences in THC and THC-COOH hair concentrations commonly found in cannabis users.

Repetitive behaviours in patients with Gilles de la Tourette syndrome: tics, compulsions, or both?

Background Repetitive behaviours (RB) in patients with Gilles de la Tourette syndrome (GTS) are frequent. However, a controversy persists whether they are manifestations of obssessive-compulsive disorder (OCD) or correspond to complex tics. Methods 166 consecutive patients with GTS aged 15–68 years were recruited and submitted to extensive neurological, psychiatric and psychological evaluations. RB were evaluated by the YBOCS symptom checklist and Mini International Neuropsychiatric Interview (M.I.N.I), and classified on the basis of a semi-directive psychiatric interview as compulsions or tics. Results RB were present in 64.4% of patients with GTS (107/166) and categorised into 3 major groups: a ‘tic-like’ group (24.3%–40/166) characterised by RB such as touching, counting, ‘just right’ and symmetry searching; an ‘OCD-like’ group (20.5%–34/166) with washing and checking rituals; and a ‘mixed’ group (13.2%–22/166) with both ‘tics-like’ and ‘OCD-like’ types of RB present in the same patient. In 6.3% of patients, RB could not be classified into any of these groups and were thus considered ‘undetermined’. Conclusions The results confirm the phenomenological heterogeneity of RB in GTS patients and allows to distinguish two types: tic-like behaviours which are very likely an integral part of GTS; and OCD-like behaviours, which can be considered as a comorbid condition of GTS and were correlated with higher score of complex tics, neuroleptic and SSRIs treatment frequency and less successful socio-professional adaptation. We suggest that a meticulous semiological analysis of RB in GTS patients will help to tailor treatment and allow to better classify patients for future pathophysiologic studies. Trial Registration ClinicalTrials.gov NCT00169351

Impact Assessment: Organic Cotton in Jalalabad, Oblast, Kyrgyztan

The aim of the study was to examine the economic performance as well as perceived social and environmental impacts of organic cotton in Southern Kyrgyzstan on the basis of a comparative field study (44 certified organic farmers and 33 conventional farmers) carried out in 2009. It also investigated farmers’ motivation for and assessment of conversion to organic farming. Cotton yields on organic farms were found to be 10% lower whereby input costs per unit were 42% lower, which resulted in organic farmers having a 20% higher revenue from cotton. Due to lower input costs and organic and fair trade price premiums the average gross margin from organic cotton was 27%. In addition to direct economic benefits organic farmers enjoy a number of additional benefits such as easy access to credits on favourable terms, provision with uncontaminated cotton cooking oil and seed cake as animal feed, marketing support as well as extension and training, services provided by the newly established organic service provider. A big majority of organic farmers perceives an improvement of soil qualities, improved health conditions, and positively assesses their previous decision to convert to organic farming. The major disadvantage of organic farming is the high manual labour input required. In the study area, where manual farm work is mainly women’s work and male labour migration widespread, women are most affected by this negative aspect of organic farming. Altogether, the results suggest that despite the inconvenience of higher work load the advantages of organic farming outweigh the disadvantages and that conversion to organic farming can improve the livelihoods of small-scale farmers.

Predictors of vaginal practices for sex and hygiene in KwaZulu-Natal, South Africa: findings of a household survey and qualitative inquiry

Vaginal practices in sub-Saharan Africa may increase HIV transmission and have important implications for development of microbicides and future HIV prevention technologies. It remains unclear which women undertake vaginal practices and what factors predict prevalence, practice type and choice of products. Using cross-sectional data from mixed research methods, we identify factors associated with vaginal practices among women in KwaZulu-Natal, South Africa. Data were gathered through focus group discussions, in-depth and key-informant interviews, followed by a province-wide, multi-stage cluster household survey, using structured questionnaires in face-to-face interviews with 867 women. This paper details six types of vaginal practices, which--despite their individual distinctiveness and diverse motivations--may be clustered into two broad groups: those undertaken for purposes of 'hygiene' (genital washing, douching and application) and those for 'sexual motivations' (application, insertion, ingestion and incisions). Multivariate analysis found significant associations between 'hygiene' practices and media access, religiosity and transactional sex. 'Sexual' practices were associated with partner concurrency, religiosity and use of injectable hormonal contraceptives. Future interventions relating to vaginal practices as well as microbicides need to reflect this characterisation of practices as sexual- and/or hygiene-related.

Prevalence, motivations, and adverse effects of vaginal practices in Africa and Asia: findings from a multicountry household survey

Background: Women worldwide use various vaginal practices to clean or modify their vulva and vagina. Additional population-level information is needed on prevalence and motivations for these practices, characteristics of users, and their adverse effects. Methods: This was a household survey using multistage cluster sampling in Tete, Mozambique; KwaZulu-Natal, South Africa; Yogyakarta, Indonesia; and Chonburi, Thailand. In 2006–2007, vaginal practices and their motivations were examined using structured interviews with women 18–60 years of age (n=3610). Results: Prevalence, frequency, and motivations varied markedly. Two thirds of women in Yogyakarta and Chonburi reported one or more practices. In Yogyakarta, nearly half ingest substances with vaginal effects, and in Chonburi, external washing and application predominate. In Tete, half reported three or four current practices, and a quarter reported five or more practices. Labial elongation was near universal, and 92% of those surveyed cleanse internally. Two third's in KwaZulu-Natal practiced internal cleansing. Insertion of traditional solid products was rare in Chonburi and Yogyakarta, but one tenth of women in KwaZulu-Natal and nearly two thirds of women in Tete do so. Multivariate analysis of the most common practice in each site showed these were more common among less educated women in Africa and young urban women in Asia. Explicit sexual motivations were frequent in KwaZulu-Natal and Tete, intended for pleasure and maintaining partner commitment. Practices in Chonburi and Yogyakarta were largely motivated by femininity and health. Genital irritation was common at African sites. Conclusions: Vaginal practices are not as rare, exotic, or benign as sometimes assumed. Limited evidence of their biomedical consequences remains a concern; further investigation of their safety and sexual health implications is warranted.

Potential and limitations of organic and fair trade cotton for improving livelihoods of smallholders: evidence from Central Asia

Cotton is a leading agricultural non-food commodity associated with soil degradation, water pollution and pesticide poisoning due to high levels of agrochemical inputs. Organic farming is often promoted as a means of addressing the economic, environmental and health risks of conventional cotton production, and it is slowly gaining ground in the global cotton market. Organic and fair trade cotton are widely seen as opportunities for smallholder farmers to improve their livelihoods thanks to higher returns, lower input costs and fewer risks. Despite an increasing number of studies comparing the profitability of organic and non-organic farming systems in developing and industrialized countries, little has been published on organic farming in Central Asia. The aim of this article is to describe the economic performance and perceived social and environmental impacts of organic cotton in southern Kyrgyzstan, drawing on a comparative field study conducted by the author in 2009. In addition to economic and environmental aspects, the study investigated farmers’ motivations toward and assessment of conversion to organic farming. Cotton yields on organic farms were found to be 10% lower, while input costs per unit were 42% lower; as a result, organic farmers’ cotton revenues were 20% higher. Due to lower input costs as well as organic and fair trade price premiums, the average gross margin from organic cotton was 27% higher. In addition to direct economic benefits, organic farmers enjoy other benefits, such as easy access to credit on favorable terms, provision of uncontaminated cottonseed cooking oil and cottonseed cake as animal feed, and marketing support as well as extension and training services provided by newly established organic service providers. The majority of organic farmers perceive improved soil quality, improved health conditions, and positively assess their initial decision to convert to organic farming. The major disadvantage of organic farming is the high manual labor input required. In the study area, where manual farm work is mainly women's work and male labor migration is widespread, women are most affected by this negative aspect of organic farming. Altogether, the results suggest that, despite the inconvenience of a higher workload, the advantages of organic farming outweigh its disadvantages and that conversion to organic farming improves the livelihoods of small-scale farmers.