Development of a poly(L-Lactic acid) based drug release system

Dissertação de mestrado em Biofísica e Bionanossistemas

Development of active bio-based multilayer systems: encapsulation of cinnamaldehyde and their physicochemical characterization

[Excerpt] In this work, different multilayer structures, using a polyhydroxybutyrate-co-valerate film with a valerate content of 8% (PHBV8) as support, were developed aiming the development of active bio-based multilayer systems. An interlayer based on zein nanofibers with and without cinnamaldehyde were electrospun in the PHBV8 film and three multilayer systems were developed: 1) without an outer layer; 2) using a PHBV8 film as outer layer; and 3) using an alginate-based film as outer layer. Their physico-chemical properties were evaluated through: water vapour and oxygen permeabilities and colour measurements, Fourier Transform Infrared Spectroscopy (FTIR) and thermal analyses. Results showed that the presence of different outer layers affected the water vapour permeability and transparency of the multilayer films. (...)

A cumulative risk model of child physical maltreatment potential: findings from a community-based study

"Published online before print November 20, 2015"

Insights into bacterial colony morphology evolution and diversification during infection development in cystic fibrosis

Tese de Doutoramento em Engenharia Biomédica.

Diseño y caracterización de plataformas de biorreconocimiento basadas en el uso de nanoestructuras, biomoléculas y polímeros. Aplicaciones para el desarrollo de (bio)sensores electroquímicos. Design and characterization of biorecognition platforms based on the use of nanostructures, biomolecules and polymers. Applications for the development of electrochemical (bio)sensors.

Los requerimientos de métodos analíticos que permitan realizar determinaciones más eficientes en diversas ramas de la Química, así como el gran desarrollo logrado por la Nanobiotecnología, impulsaron la investigación de nuevas alternativas de análisis. Hoy, el campo de los Biosensores concita gran atención en el primer mundo, sin embargo, en nuestro país es todavía un área de vacancia, como lo es también la de la Nanotecnología. El objetivo de este proyecto es diseñar y caracterizar nuevos electrodos especialmente basados en el uso de nanoestructuras y estudiar aspectos básicos de la inmovilización de enzimas, ADN, aptámeros, polisacáridos y otros polímeros sobre dichos electrodos a fin de crear nuevas plataformas de biorreconocimiento para la construcción de (bio)sensores electroquímicos dirigidos a la cuantificación de analitos de interés clínico, farmaco-toxicológico y ambiental.Se estudiarán las propiedades de electrodos de C vítreo, Au, "screen printed" y compósitos de C modificados con nanotubos de C (CNT) y/o nanopartículas (NP) de oro y/o nanoalambres empleando diversas estrategias. Se investigarán nuevas alternativas de inmovilización de las biomoléculas antes mencionadas sobre dichos electrodos, se caracterizarán las plataformas resultantes y se evaluarán sus posibles aplicaciones analíticas al desarrollo de biosensores con enzimas y ADNs como elementos de biorreconocimiento. Se funcionalizarán CNT con polímeros comerciales y sintetizados en nuestro laboratorio modificados con moléculas bioactivas. Se diseñarán y caracterizarán nuevas arquitecturas supramoleculares basadas en el autoensamblado de policationes, enzimas y ADNs sobre Au. Se evaluarán las propiedades catalíticas de NP de magnetita y de perovskitas de Mn y su aplicación al desarrollo de biosensores enzimáticos. Se diseñarán biosensores que permitan la detección altamente sensible y selectiva de secuencias específicas de ADNs de interés clínico. Se estudiará la interacción de genotóxicos con ADN (en solución e inmovilizado) y se desarrollarán biosensores que permitan su cuantificación. Se construirán biosensores enzimáticos para la cuantificación de bioanalitos, especialmente glucosa, fenoles y catecoles, y sensores electroquímicos para la determinación de neurotransmisores, ácido úrico y ácido ascórbico. Se diseñarán nuevos aptasensores electroquímicos para la cuantificación de biomarcadores, comenzando por lisozima y trombina y continuando con otros de interés regional/nacional.Se emplearán las siguientes técnicas: voltamperometrías cíclica (CV), de pulso diferencial (DPV) y de onda cuadrada (SWV); "stripping" potenciométrico a corriente constante (PSA); elipsometría; microbalanza de cristal de cuarzo con cálculo de pérdida de energía por disipación (QCM-D); resonancia de plasmón superficial con detección dual (E-SPR); espectroscopía de impedancia electroquímica (EIE); microscopías de barrido electroquímico (SECM), de barrido electrónico (SEM), de transmisión (TEM) y de fuerzas atómicas (AFM); espectrofotometría UV-visible; espectroscopías IR, Raman, de masas, RMN.Se espera que la inclusión de los CNT y/o de las NP metálicas y/o de los nanoalambres en los diferentes electrodos permita una mejor transferencia de carga de diversos analitos y por ende una detección más sensible y selectiva de bioanalitos empleando enzimas, ADN y aptámeros como elementos de biorreconocimiento. Se espera una mayor eficiencia en los aptasensores respecto de los inmunosensores, lo que permitirá la determinacion selectiva de diversos biomarcadores. La modificación de electrodos con nanoestructuras posibilitará la detección altamente sensible y selectiva del evento de hibridación. La respuesta obtenida luego de la interacción de genotóxicos con ADN permitirá un mejor conocimiento de la asociación establecida, de la cinética y de las constantes termodinámicas. Los neurotransmisores podrán ser determinados a niveles nanomolares aún en muestras complejas.

La institucionalización de la Comunidad Regional Punilla (Provincia de Córdoba): estudio y promoción de metodologías de diseño participativo y gestión asociada de políticas públicas para el desarrollo. The institution of Punilla Regional Community: study and promotion of participative metodologies for the associated planning and management of development policies.

Durante el período 2006-2008, las actividades de investigación y asistencia técnica de este equipo enfatizaron en la necesaria práctica social y política de horizontalidad en las relaciones, en la 'dimensión intersubjetiva o relacional de la regionalización' (Cáceres, 2006) en el marco de la Comunidad Regional Punilla (CRP), considerando a la identidad regional como un condicionante relevante de la 'construcción de la región como unidad de acción(Boisier, 2003). Así, durante ese período, se ha ido conformando un espacio 'regional' de composición multiactoral, social y gubernamental, para el trabajo asociativo (PROFIM, SIP, UCC 2007, 2008). Con el propósito de profundizar el Programa, este proyecto propone el fortalecimiento institucional de la CRP a través de la formalización del escenario participativo regional (Poggiese, 2001, 2002) para el diseño y gestión asociada de políticas de desarrollo. Tales propósitos y mecanismos están previstos en la Ley Orgánica de Regionalización de la Provincia de Córdoba (9.206/04) y en las normativas regionales derivadas de ésta a través de la figura del 'Consejo de la Sociedad Civil'. Con base en la observación del proceso desarrollado en Punilla desde el año 2006, esta propuesta suscribe el carácter interdisciplinario e intersectorial de la red social y política en la que se sustentará el Consejo y la lógica 'procesal y consensual' de su construcción, considerando, además, la nueva configuración del mapa político de la CRP a partir de los resultados electorales del año 2008 en tanto cambios estructurales en la relación gobierno y oposición que se presentan como una oportunidad para desarrollar los espacios públicos participativos que la sociedad regional puede ocupar para canalizar institucionalmente sus demandas. El proyecto busca 'analizar' pero también 'promover' el proceso de cambio político y social en marcha para facilitar su 'ampliación democrática' (Redín y Moroni, 2003), reflexionado críticamente y poniendo en cuestión algunos de los supuestos que han caracterizado a la retórica de la regionalización provincial: la existencia de una sociedad civil debidamente organizada en cada una de las regiones, cuya concurrencia al proceso decisorio puede asegurarse una vez 'abiertos' -formalizados- los canales de participación; la superación de la dirección bottom up en los procesos de toma de decisiones y la preeminencia de modalidades de 'articulación intermunicipal' para la gestión de políticas allí donde la Ley y las ordenanzas locales declaran establecida una 'Comunidad Regional'. El cuestionamiento de dichos supuestos sustenta, en definitiva, las preguntas que delimitan los temas- problema que se abordarán a partir de este trabajo.

Development of a data acquisition system to characterise sustainable energy technologies and to support Web-Based learning (DAQ-WBL)

Driven by concerns about rising energy costs, security of supply and climate change a new wave of Sustainable Energy Technologies (SET’s) have been embraced by the Irish consumer. Such systems as solar collectors, heat pumps and biomass boilers have become common due to government backed financial incentives and revisions of the building regulations. However, there is a deficit of knowledge and understanding of how these technologies operate and perform under Ireland’s maritime climate. This AQ-WBL project was designed to address both these needs by developing a Data Acquisition (DAQ) system to monitor the performance of such technologies and a web-based learning environment to disseminate performance characteristics and supplementary information about these systems. A DAQ system consisting of 108 sensors was developed as part of Galway-Mayo Institute of Technology’s (GMIT’s) Centre for the Integration of Sustainable EnergyTechnologies (CiSET) in an effort to benchmark the performance of solar thermal collectors and Ground Source Heat Pumps (GSHP’s) under Irish maritime climate, research new methods of integrating these systems within the built environment and raise awareness of SET’s. It has operated reliably for over 2 years and has acquired over 25 million data points. Raising awareness of these SET’s is carried out through the dissemination of the performance data through an online learning environment. A learning environment was created to provide different user groups with a basic understanding of a SET’s with the support of performance data, through a novel 5 step learning process and two examples were developed for the solar thermal collectors and the weather station which can be viewed at http://www.kdp 1 .aquaculture.ie/index.aspx. This online learning environment has been demonstrated to and well received by different groups of GMIT’s undergraduate students and plans have been made to develop it further to support education, awareness, research and regional development.

Sudden Cardiac Death in Brazil: A Community-Based Autopsy Series (2006-2010)

Background: Sudden cardiac death (SCD) is a sudden unexpected event, from a cardiac cause, that occurs in less than one hour after the symptoms onset, in a person without any previous condition that would seem fatal or who was seen without any symptoms 24 hours before found dead. Although it is a relatively frequent event, there are only few reliable data in underdeveloped countries. Objective: We aimed to describe the features of SCD in Ribeirão Preto, Brazil (600,000 residents) according to Coroners’ Office autopsy reports. Methods: We retrospectively reviewed 4501 autopsy reports between 2006 and 2010, to identify cases of SCD. Specific cause of death as well as demographic information, date, location and time of the event, comorbidities and whether cardiopulmonary resuscitation (CPR) was attempted were collected. Results: We identified 899 cases of SCD (20%); the rate was 30/100000 residents per year. The vast majority of cases of SCD involved a coronary artery disease (CAD) (64%) and occurred in men (67%), between the 6th and the 7th decades of life. Most events occurred during the morning in the home setting (53.3%) and CPR was attempted in almost half of victims (49.7%). The most prevalent comorbidity was systemic hypertension (57.3%). Chagas’ disease was present in 49 cases (5.5%). Conclusion: The majority of victims of SCD were men, in their sixties and seventies and the main cause of death was CAD. Chagas’ disease, an important public health problem in Latin America, was found in about 5.5% of the cases.

Development-oriented refugee assistance : sustainable, efficient and gender-sensitive? ; theoretical and practical analyses based on a case study of the Rhino camp in Uganda

Magdeburg, Univ., Fak. für Humanwiss., Diss., 2012

Development of a new isogeometric finite element and its application for Lamb wave based structural health monitoring

Magdeburg, Univ., Fak. für Maschinenbau, Diss., 2012

Development of CBCT-based prostate setup correction strategies and impact of rectal distension.

BACKGROUND: Cone-beam computed tomography (CBCT) image-guided radiotherapy (IGRT) systems are widely used tools to verify and correct the target position before each fraction, allowing to maximize treatment accuracy and precision. In this study, we evaluate automatic three-dimensional intensity-based rigid registration (RR) methods for prostate setup correction using CBCT scans and study the impact of rectal distension on registration quality. METHODS: We retrospectively analyzed 115 CBCT scans of 10 prostate patients. CT-to-CBCT registration was performed using (a) global RR, (b) bony RR, or (c) bony RR refined by a local prostate RR using the CT clinical target volume (CTV) expanded with 1-to-20-mm varying margins. After propagation of the manual CT contours, automatic CBCT contours were generated. For evaluation, a radiation oncologist manually delineated the CTV on the CBCT scans. The propagated and manual CBCT contours were compared using the Dice similarity and a measure based on the bidirectional local distance (BLD). We also conducted a blind visual assessment of the quality of the propagated segmentations. Moreover, we automatically quantified rectal distension between the CT and CBCT scans without using the manual CBCT contours and we investigated its correlation with the registration failures. To improve the registration quality, the air in the rectum was replaced with soft tissue using a filter. The results with and without filtering were compared. RESULTS: The statistical analysis of the Dice coefficients and the BLD values resulted in highly significant differences (p<10(-6)) for the 5-mm and 8-mm local RRs vs the global, bony and 1-mm local RRs. The 8-mm local RR provided the best compromise between accuracy and robustness (Dice median of 0.814 and 97% of success with filtering the air in the rectum). We observed that all failures were due to high rectal distension. Moreover, the visual assessment confirmed the superiority of the 8-mm local RR over the bony RR. CONCLUSION: The most successful CT-to-CBCT RR method proved to be the 8-mm local RR. We have shown the correlation between its registration failures and rectal distension. Furthermore, we have provided a simple (easily applicable in routine) and automatic method to quantify rectal distension and to predict registration failure using only the manual CT contours.

Development and current use of parenteral nutrition in critical care - an opinion paper.

Critically ill patients depend on artificial nutrition for the maintenance of their metabolic functions and lean body mass, as well as for limiting underfeeding-related complications. Current guidelines recommend enteral nutrition (EN), possibly within the first 48 hours, as the best way to provide the nutrients and prevent infections. EN may be difficult to realize or may be contraindicated in some patients, such as those presenting anatomic intestinal continuity problems or splanchnic ischemia. A series of contradictory trials regarding the best route and timing for feeding have left the medical community with great uncertainty regarding the place of parenteral nutrition (PN) in critically ill patients. Many of the deleterious effects attributed to PN result from inadequate indications, or from overfeeding. The latter is due firstly to the easier delivery of nutrients by PN compared with EN increasing the risk of overfeeding, and secondly to the use of approximate energy targets, generally based on predictive equations: these equations are static and inaccurate in about 70% of patients. Such high uncertainty about requirements compromises attempts at conducting nutrition trials without indirect calorimetry support because the results cannot be trusted; indeed, both underfeeding and overfeeding are equally deleterious. An individualized therapy is required. A pragmatic approach to feeding is proposed: at first to attempt EN whenever and as early as possible, then to use indirect calorimetry if available, and to monitor delivery and response to feeding, and finally to consider the option of combining EN with PN in case of insufficient EN from day 4 onwards.

Development of mavoglurant and its potential for the treatment of fragile X syndrome.

Introduction: Fragile X syndrome (FXS) is the most common inherited cause of intellectual disability. With no curative treatment available, current therapeutic approaches are aimed at symptom management. FXS is caused by silencing the FMR1 gene, which encodes FMRP; as loss of FMRP leads to the development of symptoms associated with FXS. Areas covered: In this evaluation, the authors examine the role of the metabotropic glutamate receptor 5 (mGluR5) in the pathophysiology of FXS, and its suitability as a target for rescuing the disease state. Furthermore, the authors review the evidence from preclinical studies of pharmacological interventions targeting mGluR5 in FXS. Lastly, the authors assess the findings from clinical studies in FXS, in particular the use of the Aberrant Behavior Checklist-Community Edition (ABC-C) and the recently developed ABC-C for FXS scale, as clinical endpoints to assess disease modification in this patient population. Expert opinion: There is cautious optimism for the successful treatment of the core behavioral and cognitive symptoms of FXS based on preclinical data in animal models and early studies in humans. However, the association between mGluR5-heightened responsiveness and the clinical phenotype in humans remains to be demonstrated. Many questions regarding the optimal treatment and outcome measures of FXS remain unanswered.

The Argentine ant (Linepithema humile) invasion effects on Mediterranean forests’ trophic web: blue tit (Parus caeruleus) reproduction and development

Les invasions biològiques representen una greu amenaça per al funcionament dels ecosistemes i per a la preservació de la biodiversitat.. La formiga argentina (Linepithema humile) està considerada com una de les 100 espècies invasores més nocives. Prospera en extenses àrees de clima mediterrani de regions temperades i subtropicals de tots els continents amb l’excepció de l’Antàrtida. És una formiga dominant i una competidora agressiva que mitjançant múltiples mecanismes, des de predació directe a competència, produeix efectes negatius en una amplia varietat de taxons, principalment formigues i altres artròpodes, però també vertebrats. S’ha investigat, per primera vegada, els efectes de la formiga invasiva sobre les comunitats d’artròpodes de fullatge i com aquestes pertorbacions es transmeten en la xarxa tròfica del bosc esclerofil•le mediterrani. En les suredes estudiades la invasió de formiga argentina és causa directe de la extinció local de la gran majoria de poblacions de formigues natives. En el període mostrejat s’han constatat també impactes negatius en la diversitat i en l’abundància d’artròpodes natius en les capçades dels arbres, particularment d’erugues. Una avaluació preliminar basada únicament amb dades del 2005 indica que, reduint la disponibilitat d’erugues, la formiga argentina empobreix l’hàbitat reproductiu de la mallerenga blava (Parus caeruleus). La mallerenga blava basa la dieta insectívora estricte de la seva pollada fonamentalment en les erugues. No hem detectat impactes en l’èxit reproductiu de les mallerengues blaves en zones envaïdes. Els polls crescuts en àrees envaïdes assoleixen una condició física similar als de les zones no envaïdes, però la reducció en la disponibilitat d’erugues associada a la invasió de formiga argentina es tradueix en un creixement descompassat i en una menor mida estructural del polls volanders. Així, les pertorbacions en la comunitat d’artròpodes associades a la invasió de la formiga argentina promouen efectes bottom-up que acaben perjudicant el desenvolupament dels polls de mallerenga blava.

Mass spectrometry for the evaluation of cardiovascular diseases based on proteomics and lipidomics.

The identification and quantification of proteins and lipids is of major importance for the diagnosis, prognosis and understanding of the molecular mechanisms involved in disease development. Owing to its selectivity and sensitivity, mass spectrometry has become a key technique in analytical platforms for proteomic and lipidomic investigations. Using this technique, many strategies have been developed based on unbiased or targeted approaches to highlight or monitor molecules of interest from biomatrices. Although these approaches have largely been employed in cancer research, this type of investigation has been met by a growing interest in the field of cardiovascular disorders, potentially leading to the discovery of novel biomarkers and the development of new therapies. In this paper, we will review the different mass spectrometry-based proteomic and lipidomic strategies applied in cardiovascular diseases, especially atherosclerosis. Particular attention will be given to recent developments and the role of bioinformatics in data treatment. This review will be of broad interest to the medical community by providing a tutorial of how mass spectrometric strategies can support clinical trials.