Experiments in constituting a taste panel for canned and frozen prawn products

With a view to constituting a taste panel in the laboratory for detecting the flavor changes in canned and frozen prawn, three methods of panel selection (scalar scoring method, range and deviation method and triangular method) were tried. Out of the three, triangular method was found to be suitable for panel formation in canned and frozen prawn. Using this method a panel of six members was formed for detecting flavor changes in the two products.

Quality aspects of some exportable dried fishery products of Bangladesh

A study was conducted to evaluate the quality aspects of eight exportable dried fishery products of Bangladesh. The products were evaluated by examining organoleptic properties, water reconstitution behavior, microbiological and biochemical aspects. The water reconstitution rate was faster in ribbon fish and Bombay duck, and slower in other fishes and air bladder and shark fin products. Organoleptic and physical characteristics in respect of color, odor, texture, insect infestation and broken pieces of the products revealed that all of the products were either in excellent or acceptable condition. Total viable bacterial load ranged from 0.95 x 104 CFU/g to 1.8 x 104 CFU/g in dried products. Coliform bacteria was absent in all the dried fishery products. The results of moisture, crude protein, lipid and ash content of the products ranged from 16.20 to 23.51%, 58.37 to 82.86%, 0.17 to 14.44% and 0.58 to 9.23%, respectively. Non-protein nitrogen (NPN) contents were in the range of 0.104 to 2.372% and the pepsin digestibility values were of 88.41 to 94.23%. The results of the study suggested that the exportable dried products were of good quality and hygienically safe.

Nutritional characteristics of the two fermented fish products: Hentak and Ngari of Manipur

Proximate composition and nutritional characteristics of the two fermented fish products Hentak and Ngari of Manipur (India) were evaluated. Percentage of moisture, protein, lipid and ash contents in Hentak and Ngari were respectively: 36.30 versus 36.03; 33.33 versus 38.38; 13.60 versus 13.34 and 11.43 versus 5.49. Digestibility values in feeding trials in laboratory rats for 28 days were 82.37% for Hentak 89.46% for Ngari and that of Casein was 92.69%. The biological value, food conversion ratio and protein efficiency ratio (PER) of Hentak were 96.94, 4.83 and 1.8 respectively and that of Ngari were 97.83, 3.17 and 1.8 respectively. The α amino nitrogen of Hentak and Ngari in Pepsin + Trypsin phase were 28.40 and 28.92 respectively. The TBA number, peroxide value and TVBN were within the acceptable limits.

Oyster mushroom waste as manure in fish culture: a preliminary study

In an attempt to recycle the waste substrates of the oyster-mushroom crop, tanks were stocked with seed of Indian major carp Cirrhinus mrigala at the rate of 600,000/ha and waste substrate was applied at weekly interval at 0, 50, 100, 150, 200 and 250 g/tank. Oyster mushroom waste not only provided highly nutritive colonised detritus to the fish as direct feed, but also produced rich plankton in the tank. In waste treated tanks, production was better than in the control in 150, 200 and 250 g/tank treatment suggesting the possibility of fish-oyster mushroom integration.

Limit of drug residues in aquatic products (NY5071-2002)

Weimin, ZOU, lexian YANG, lan JIANG, Shuqin WU, Qi YI, Jianli WU

Processing and marketing of fish with special reference to export of pelagic fish and fish products

The paper describes the world tuna fishery, industry and markets and the trends for its future development. The prospects for developing a tuna export industry in Sri Lanka are discussed. Suggestions are given as to products composition, international co-operation and utilization of available processing facilities. The need for industry and export support is stressed, and it is concluded that preparations for the development should start well in time.

A survey of process hygiene in the Sri Lankan prawn industry. 1. Hygiene status of raw materials and products

A survey of processing hygiene in the Sri Lankan prawn industry has shown that the incoming raw material has extremely high bacterial loadings; about 50% of samples analysed had a total count in excess of 10,000,000/g. Although beheading reduces the count, ineffective temperature control during processing means that the final total count of raw, shell-on, P.U.D. and P.A.D. prawns, as well as cooked prawns, is in excess of 1,000,000/g. - the maximum level specified by many importing countries.

Studies on the preparation of fish silage. 3. Dried silage products

An investigation was undertaken on the production of dried products from silver belly (Leiognathus splendens) silage mixed with plant filter materials. Silages produced using hydrochloric acid and/or formic acid when mixed with rice bran or maize meal and dried, yielded powders having an acceptable appearance and a pleasant odour, which are suitable for use in compounded chicken feeds.

Comparison of stabilised/solidified mixes of model drill cuttings based on the North Sea and Red Sea Areas

Following the global stringent legislations regulating the wastes generated from the drilling process of oil exploration and production activities, the management of hazardous drill cuttings has become one of the pressing needs confronting the petroleum industry. Most of the prevalent treatment techniques adopted by oil companies are extremely expensive and/or the treated product has to be landfilled without any potential end-use; thereby rendering these solutions unsustainable. The technique of stabilisation/solidification is being investigated in this research to treat drill cuttings prior to landfilling or for potential re-use in construction products. Two case studies were explored namely North Sea and Red Sea. Given the known difficulties with stabilising/solidifying oils and chlorides, this research made use of model drill cutting mixes based on typical drill cutting from the two case studies, which contained 4.2% and 10.95% average concentrations of hydrocarbons; and 2.03% and 2.13% of chlorides, by weight respectively. A number of different binders, including a range of conventional viz. Portland cement (PC) as well as less-conventional viz. zeolite, or waste binders viz. cement kiln dust (CKD), fly ash and compost were tested to assess their ability to treat the North Sea and Red Sea model drill cuttings. The dry binder content by weight was 10%, 20% and 30%. In addition, raw drill cuttings from one of the North Sea offshore rigs were stabilised/solidified using 30% PC. The characteristics of the final stabilised/solidified product were finally compared to those of thermally treated cuttings. The effectiveness of the treatment using the different binder systems was compared in the light of the aforementioned two contaminants only. A set of physical tests (unconfined compressive strength (UCS)), chemical tests (NRA leachability) and micro-structural examinations (using scanning electron microscopy (SEM), and X-ray diffraction (XRD)) were used to evaluate the relative performance of the different binder mixes in treating the drill cuttings. The results showed that the observed UCS covered a wide range of values indicating various feasible end-use scenarios for the treated cuttings within the construction industry. The teachability results showed the reduction of the model drill cuttings to a stable non-reactive hazardous waste, compliant with the UK acceptance criteria for non-hazardous landfills: (a) by most of the 30% and 20% binders for chloride concentrations, and (b) by the 20% and 30% of compost-PC and CKD-PC binders for the Red Sea cuttings. The 20% and 30% compost-PC and CKD-PC binders successfully reduced the leached oil concentration of the North Sea cuttings to inert levels. Copyright 2007, Society of Petroleum Engineers.

Techno-economic analysis of production and marketing of marine by-products in India

Marine by-products coming under the ancillary products group found many applications in pharmaceutical and industrial sectors. Although many of these products are fetching very high price at the export market, adequate statistics regarding their current production, marketing and utilisation is lacking. The present analysis deals with the production potential, level of exploitation, uses, export growth rate and potential for the future of some of these marine by-products. The analysis revealed that an estimated quantity of 205 t. of shells, 10 t. of gastropod operculum, 4,932 t. of shark liver oil and 4,384 t. of shark cartilage could be produced annually in India with the current landings. The production potential of chitin is estimated as 3,560 t. from shrimp shell wastes and 1,354 t. from crab shell wastes. The high unit value of different products clearly indicates the scope for their development by evolving appropriate utilisation and marketing strategies.

Centrifuge modelling and dynamic testing of municipal solid waste (MSW) landfills

An investigation into the seismic behaviour of municipal solid waste (MSW) landfills by dynamic centrifuge testing was undertaken. This paper presents physical modelling of MSW landfills for dynamic centrifuge testing, with regard to the following research areas: 1. amplification characteristics of municipal solid waste; 2. tension induced in geomembranes placed on landfill slopes due to earthquake loading; 3. damage to landfill liners due to liquefaction of foundation soil. A model waste, that has engineering properties similar to MSW, is presented. A model geomembrane that can be used in centrifuge tests is also presented. Results of dynamic centrifuge tests with the model geomembrane showed that an earthquake loading induces additional permanent tension (∼25%) in the geomembrane. © 2006 Taylor & Francis Group.

Flavour components of some processed. fish and fishery products of Japan

A study was conducted to examine the flavour components of some processed fish and fishery products of Japan by gas chromatography-mass spectrometry (GC-MS). In brief the method was to absorb the headspace volatiles at 70°C into the fused silica fibre of needle of the solid phase micro extraction fibre. The absorbed components were injected to the GC-MS. The components were identified by computer matching with library database as well as by authentic standard components. In general the number of flavour components were higher in the processed fish and fishery products (except frozen prawn) than that of the raw fish and prawn. The concentration (quantity) of the f1avour components in processed fish and fishery products was much higher than that of the raw fish and prawn. Smoked salmon and baked salmon possessed double number of flavour components than that of the raw salmon. Smoking resulted the highest number of flavour components followed by baking (grilling) and canning, surimi products (kamaboko and chikuwa), drying and lastly salting. However, freezing and frozen storage resulted loss of flavour components in prawn.

Development of canned products from Indian major carp, catla (Catla catla)

Pieces of catla fish (Catla catla, a major carp of lndian subcontinent) of length 10 to 11 cm and thickness 1.0 to 1.5cm were precooked by two methods; steam precooking and frying. The precooked pieces were packed_in No.1 tall can (30lx411) with various hot filling media like oil, brine, tomato sauce and curry. Cans were seamed by a hand seamer and retorted at 117.2° C (12 psi) for 90 minutes. All the canned products had satisfactory cut-out, biochemical and organoleptic characteristics. Steam precooked canned products had moisture content of 65.6 to 74%, protein content of 20.8 to 22%, fat content of 1.1 to 6.6% and ash content of 2.1 to 2.5%; whereas fried canned products had moisture content of 65.4 to 68.2%, protein content of 21.3 to 22%, fat content of 7 to 10.2% and ash content of 2.1 to 2.7% on wet wt. basis. Salt content in steam precooked and fried canned products varied from 1.2 to 1.9% and 2.0 to 2.5% respectively. All the canned products were organoleptically good. However, degree of preference varied for different products. Canned fried catla in curry was the best product among all types of packs. Among the precooking methods, frying was more efficient than steam precooking in controlling the amount of exudate to a desirable limit in canned products. However, crispness, the characteristic quality for a fried fish, was lost during retorting. There was no change in quality characteristics during a storage period of 3 months at ambient temperature (32±2°C).