The Effect of Legal Culture on the Development of International Evidentiary Practice: From the ‘Robing Room’ to the ‘Melting Pot’

This paper draws on some of the preliminary findings of a small pilot study which aimed to discover what evidentiary challenges a range of practitioners with experience of different international trials faced in the cases they were involved in, and what practices were developed to deal with these challenges. The findings in this study are based on the data collected from The Hague-based institutions, the ICC, the ICTY, the ICTY and ICTR Appeals Chamber, and the Special Tribunal for the Lebanon (STL). It is argued that professionals moving from institution to institution are engaged in a process of cross-pollination which itself influences the practices that develop, although a common understanding of certain evidentiary issues in international trials remains fragmented and at times elusive.

Selective Laser Melting of the Eutectic Silver-Copper Alloy Ag 28 wt % Cu

The aim of this work was to perform a detailed investigation of the use of Selective Laser Melting (SLM) technology to process eutectic silver-copper alloy Ag 28 wt. % Cu (also called AgCu28). The processing occurred with a Realizer SLM 50 desktop machine. The powder analysis (SEM-topography, EDX, particle distribution) was reported as well as the absorption rates for the near-infrared (NIR) spectrum. Microscope imaging showed the surface topography of the manufactured parts. Furthermore, microsections were conducted for the analysis of porosity. The Design of Experiments approach used the response surface method in order to model the statistical relationship between laser power, spot distance and pulse time.

Caratterizzazione microstrutturale e frattografica di componenti in acciaio 316L prodotti tramite Selective Laser Melting

Il Selective Laser Melting è un processo di additive manufacturing che consiste nella realizzazione di componenti metallici tridimensionali, sovrapponendo strati di polvere, che viene via via fusa mediante una sorgente controllata di energia (laser). È una tecnica produttiva che viene utilizzata da più di 20 anni ma solo ora sta assumendo un ruolo rilevante nell’industria. È un processo versatile ma complesso che ad oggi permette di processare solo un numero limitato di leghe. Il presente lavoro di tesi riguarda in particolare lo studio, dal punto di vista microstrutturale, di componenti in acciaio inossidabile austenitico AISI-316L processato mediante Selective Laser Melting, attività svolta in collaborazione con il Gruppo di Tecnologia – Laser del Dipartimento di Ingegneria Industriale. Alla base dell’attività sperimentale è stata svolta anche un’ampia ricerca bibliografica per chiarire lo stato dell’arte sul processo e sulla lega in questione, la microstruttura, i difetti, le proprietà meccaniche e l’effetto dei parametri di processo sul componente finito. Le attività sperimentali hanno previsto una prima fase di caratterizzazione delle polveri di 316L, successivamente la caratterizzazione dei campioni prodotti tramite selective laser melting, in termini di microstruttura e difetti correlati al processo. Le analisi hanno rivelato la presenza di una microstruttura “gerarchica” costituita da melt pool, grani e celle submicrometriche. I difetti rinvenuti sono pori, delaminazione degli strati, particelle di polvere non fuse. Infine è stata eseguita la caratterizzazione frattografica dei campioni sottoposti a prove di trazione e di fatica a flessione rotante (attività condotte dal gruppo Laser) per identificare la morfologia di frattura e i siti di innesco della cricca di fatica.

Dynamics of an axisymmetric electromagnetic 'crucible' melting

Different industrial induction melting processes involve free surface and melt-solid interface of the liquid metal subject to dynamic change during the technological operation. Simulation of the liquid metal dynamics requires to solve the non-linear, coupled hydrodynamic-electromagnetic-heat transfer problem accounting for the time development of the liquid metal free boundary with a suitable turbulent viscosity model. The present paper describes a numerical solution method applicable for various axisymmetric induction melting processes, such as, crucible with free top surface, levitation, semi-levitation, cold crucible and similar melting techniques. The presented results in the cases of semi-levitation and crucible with free top surface meltings demonstrate oscillating transient behaviour of the free metal surface indicating the presence of gravity-inertial-electromagnetic waves which are coupled to the internal fluid flow generated by both the rotational and potential parts of the electromagnetic force.

The spectral modelling of contactless induction melting for reactive metals

Abstract not available

Modelling the melting and solidification of solder material

Abstract not available

Multiphase modeling of melting / solidification with high density variations using XFEM

La modélisation de la cryolite, utilisée dans la fabrication de l’aluminium, implique plusieurs défis, notament la présence de discontinuités dans la solution et l’inclusion de la difference de densité entre les phases solide et liquide. Pour surmonter ces défis, plusieurs éléments novateurs ont été développés dans cette thèse. En premier lieu, le problème du changement de phase, communément appelé problème de Stefan, a été résolu en deux dimensions en utilisant la méthode des éléments finis étendue. Une formulation utilisant un multiplicateur de Lagrange stable spécialement développée et une interpolation enrichie a été utilisée pour imposer la température de fusion à l’interface. La vitesse de l’interface est déterminée par le saut dans le flux de chaleur à travers l’interface et a été calculée en utilisant la solution du multiplicateur de Lagrange. En second lieu, les effets convectifs ont été inclus par la résolution des équations de Stokes dans la phase liquide en utilisant la méthode des éléments finis étendue aussi. Troisièmement, le changement de densité entre les phases solide et liquide, généralement négligé dans la littérature, a été pris en compte par l’ajout d’une condition aux limites de vitesse non nulle à l’interface solide-liquide pour respecter la conservation de la masse dans le système. Des problèmes analytiques et numériques ont été résolus pour valider les divers composants du modèle et le système d’équations couplés. Les solutions aux problèmes numériques ont été comparées aux solutions obtenues avec l’algorithme de déplacement de maillage de Comsol. Ces comparaisons démontrent que le modèle par éléments finis étendue reproduit correctement le problème de changement phase avec densités variables.

Free surface and mesh control for the FV simulation of semi-levitation melting

Abstract not available

Enhancing the total phenolic content and antioxidants of lemon pomace aqueous extracts by applying UV-C irradiation on the dried powder

Several studies have shown that UV-C irradiation promotes the bioactive compounds and antioxidants of fresh fruits and vegetables. The aim of this study was to apply UV irradiation in lemon pomace dried powder for enhancing its phenolic content and antioxidant properties, thus more bioactive compounds should be available for extraction and utilization. Lemon pomace dried powder was placed above the UV lamp and treated with dosages of 4, 19, 80 and 185 kJ m-2, while untreated powder was used as a control. UV-C irradiation significantly affected the total phenolic content, total flavonoid content, proanthocyanidins and antioxidant capacity measured by CUPRAC and FRAP of the lemon pomace dried powder, while it did not affect the vitamin C content. UV-C irradiation of 19 kJ m-2 resulted in 19% higher total phenolic content than the control, while UV-C irradiation of 180 kJ m-2 resulted in 28% higher total flavonoid content than the control. The antioxidant capacity was reduced when UV-C irradiation more than 4 kJ m-2 was applied. The results of this study indicate that UV-C treatment has the potential to increase the extraction of bioactive compounds of lemon dried pomace at relatively high dosages.

Medición y predicción de la radiación solar global UV-B bajo cielos claros y sin nubes

Se presentan mediciones experimentales de la radiación solar ultravioleta en el rango B del espectro solar (UV-B) y la radiación ultravioleta en el rango total RUV (UV-A+UV-B) en días claros y sin nubes en Heredia, Costa Rica. Se utilizó una radiómetro UV-B, que mide la radiación solar en el rango espectral 280-315 nm, y un radiómetro RUV, que mide la radiación solar en el rango espectral 280-385 nm. La dependencia entre entre UV-B y RUV también fue investigada, y se encontró un excelente grado de asociación entre ambas. Además se detalló que UV-B representa solamente un 5,4% de RUV, a pesar de que UV-B es mil veces más potente que UV-A. Los valores de UV-B medidos in situ fueron comparados con los valores predichos por un modelo atmosférico espectral, el cual utiliza como datos de entrada: la hora del día, la latitud, la altitud, el albedo superficial, la distancia Tierra-Sol, la turbiedad atmosférica y el ozono atmosférico. La comparación entre los valores medidos y predichos dio resultados satisfactorios.

Study and development of UV photodetectors envisaging COMPASS RICH-1 upgrade and applications

COMPASS is an experiment at CERN’s SPS whose goal is to study hadron structure and spectroscopy. The experiment includes a wide acceptance RICH detector, operating since 2001 and subject to a major upgrade of the central region of its photodetectors in 2006. The remaining 75% of the photodetection area are still using MWPCs from the original design, who suffer from limitations in gain due to aging of the photocathodes from ion bombardment and due to ion-induced instabilities. Besides the mentioned limitations, the increased luminosity conditions expected for the upcoming years of the experiment make an upgrade to the remaining detectors pertinent. This upgrade should be accomplished in 2016, using hybrid detectors composed of ThGEMs and MICROMEGAS. This work presents the study, development and characterization of gaseous photon detectors envisaging the foreseen upgrade, and the progress in production and evaluation techniques necessary to reach increasingly larger area detectors with the performances required. It includes reports on the studies performed under particle beam environment of such detectors. MPGD structures can also be used in a variety of other applications, of which nuclear medical imaging is a notorious example. This work includes, additionally, the initial steps in simulating, assembling and characterizing a prototype of a gaseous detector for application as a Compton Camera.

Induction of apoptosis by UV in the flat oyster, Ostrea edulis

Apoptosis is a fundamental feature in the development of many organisms and tissue systems. It is also a mechanism of host defense against environmental stress factors or pathogens by contributing to the elimination of infected cells. Hemocytes play a key role in defense mechanisms in invertebrates and previous studies have shown that physical or chemical stress can increase apoptosis in hemocytes in mollusks. However this phenomenon has rarely been investigated in bivalves especially in the flat oyster Ostrea edulis. The apoptotic response of hemocytes from flat oysters, O. edulis, was investigated after exposure to UV and dexamethasone, two agents known to induce apoptosis in vertebrates. Flow cytometry and microscopy were combined to demonstrate that apoptosis occurs in flat oyster hemocytes. Investigated parameters like intracytoplasmic calcium activity, mitochondrial membrane potential and phosphatidyl-serine externalization were significantly modulated in cells exposed to UV whereas dexamethasone only induced an increase of DNA fragmentation. Morphological changes were also observed on UV-treated cells using fluorescence microscopy and transmission electron microscopy. Our results confirm the apoptotic effect of UV on hemocytes of O. edulis and suggest that apoptosis is an important mechanism developed by the flat oyster against stress factors.

Size effects on self-assembly and melting of silver-alkanethiolate on inert surfaces

Self-assembled materials produced in the reaction between alkanethiol and Ag are characterized and compared. It is revealed that the size of the Ag substrate has a significant role in the self-assembly process and determines the reaction products. Alkanethiol adsorbs on the surface of Ag continuous planar thin films and only forms self-assembled monolayers (SAMs), while the reaction between alkanethiol and Ag clusters on inert surfaces is more aggressive and generates a significantly larger amount of alkanethiolate. Two dissimilar products are yielded depending on the size of the clusters. Small Ag clusters are more likely to be converted into multilayer silver-alkanethiolate (AgSR, R = CnH2n+1) crystals, while larger Ag clusters form monolayer-protected clusters (MPCs). The AgSR crystals are initially small and can ripen into large lamellae during thermal annealing. The crystals have facets and flat terraces with extended area, and have a strong preferred orientation in parallel with the substrate surface. The MPCs move laterally upon annealing and reorganize into a single-layer network with their separation distance approximately equal to the length of an extended alkyl chain. AgSR lamellar crystals grown on inert surfaces provide an excellent platform to study the melting characteristics of crystalline lamellae of polymeric materials with the thickness in the nanometer scale. This system is also unique in that each crystal has integer number of layers – magic-number size (thickness). The size of the crystals is controlled by adjusting the amount of Ag and the annealing temperature. X-ray diffraction (XRD) and atomic force microscopy (AFM) are combined to accurately determine the size (number of layers) of the lamellar crystals. The melting characteristics are measured with nanocalorimetry and show discrete melting transitions which are attributed to the magic-number sizes of the lamellar crystals. The discrete melting temperatures are intrinsic properties of the crystals with particular sizes. Smaller lamellar crystals with less number of layers melt at lower temperatures. The melting point depression is inversely proportional to the total thickness of the lamellae – the product of the number of layers and the layer thickness.

UV wavelengths experienced during development affect larval newt visual sensitivity and predation efficiency

International audience