A morphometric ultrastructural study of the seminal vesicle of rats submitted to experimental chronic alcoholism

The effects of chronic alcohol ingestion on the secretory epithelium of the seminal vesicle were studied in rats (Rattus norvegicus). Male adult albino Wistar rats were divided into two groups: alcoholic and control. Tips of the seminal vesicle were removed and prepared for light and electron microscopy. Ultrastructural observations on the epithelial cells of the seminal vesicle showed reduced epithelial cell size, decreased apical secretory vacuoles, irregularly shaped nuclei with deep infoldings, increased lipid droplets and dense bodies, a small number of microvilli covering the cell surface, and signs of degeneration. In addition to the hormonal effects, alcohol may act on the secretory epithelium of the seminal vesicle.

Histological evaluation of MTA as a root-end filling material

Aim To assess the histological response associated with grey mineral trioxide aggregate (GMTA) and zinc oxide eugenol (ZOE) as root-end filling materials in teeth where the root canals were not filled and the coronal access cavities were not restored.Methodology Periapical lesions were developed in 24 premolar teeth in three dogs. The root canals were prepared and half of them were dried, filled and the coronal access restored (closed). The remaining teeth were not root filled and no coronal restoration was placed (open). Apical root-end resections were performed 3 mm from the apex, and root-end cavities were prepared with ultrasonic tips. These were randomly filled with either ZOE or GMTA in the same number of specimens using MAPSYSTEM device. After 180 days the animals were killed and blocks of tissues removed and processed for histological examination. Periradicular tissue reaction was evaluated, including severity of inflammation and cementum formation. Statistical analysis was performed using ANOVA analysis and Tukey's test.Results A significant difference was found between the levels of inflammation in the periradicular tissues of the GMTA/closed group, compared with the ZOE/open and ZOE/closed groups (P < 0.05) but not between GMTA/closed and GMTA/open groups. Cementum formation was not found over any ZOE specimens but over MTA in all specimens. No microorganisms were found in the interface between the material and the dentinal walls.Conclusions GMTA was associated with less periapical inflammation and tissue response when used as a root-end filling material, even when no root filling or coronal restoration was present.

Effect of oxytocin on transepithelial transport of water and Na+ in distinct ventral regions of frog skin (Rana catesbeiana)

Thoracic, abdominal, and pelvic fragments of ventral skin of Rana catesbeiana were analysed regarding the effect of oxytocin on: (1) transepithelial water transport; (2) short-circuit current, (3) skin conductance and electrical potential difference; (4) Na+ conductance, the electromotive force of the Nat transport mechanism, and shunt conductance; (5) short-circuit current responses to fast Na+ by K+ replacement in the outer compartment, and (6) epithelial microstructure. Unstimulated water and Na+ permeabilities were low along the ventral skin. Hydrosmotic and natriferic responses to oxytocin increased from thorax to pelvis, Unstimulated Na+ conductance was greater in pelvis than in abdomen, the other electrical parameters being essentially similar in both skin fragments. Contribution of shunt conductance to total skin conductance was higher in abdominal than in pelvic skin. Oxytocin-induced increases of total skin conductance, Na+ conductance, and shunt conductance in pelvis were significantly larger than in abdomen, An oscillatory behaviour of the short-circuit current was observed only in oxytocin-treated pelvic skins. Decrease of epithelial thickness and increase of mitochondria-rich cell number were observed from thorax to pelvis, Oxytocin-induced increases of interspaces were more conspicuous in pelvis and abdomen than in thorax.

Effect of handpiece tip design on the cutting efficiency of an air abrasion system

Purpose : the aim of this study was to evaluate the effect of nozzle angle and tip diameter on the cutting efficiency of an air abrasion system. Materials and Methods: Thirty-six extracted human third molars were air-abraded with the PrepStar microabrasion machine using a handpiece with either 80degrees or 45degrees nozzle angles with 0.38 or 0.48 nun tip orifice diameters. The following parameters were held constant: abrasive particle size (27 mum), air pressure (80 psi), distance (2 mm.) and duration (15 seconds). The cutting efficiency was compared using enamel, dentin and cementum substrates. Width and depth of the cutting patterns were analyzed and measured using scanning electron micrographs. Results: Statistical analysis using three-way ANOVA and Duncan's Multiple Range test revealed that the width of the cuts was significantly greater when the cavities were prepared using the 45degrees nozzle angle. Significantly deeper cavities were produced with the 80degrees nozzle angle. The tip orifice of the nozzle influenced the cutting efficiency in softer substrates, dentin and cementum. Precise removal of hard tissue is best accomplished using the 80degrees angle nozzle tips for all types of tooth surfaces, enamel, dentin and cementum.

Kinetics of zinc uptake and anatomy of roots and leaves of coffee trees as affected by zinc nutrition

Zinc (Zn) uptake kinetics and root and leaf anatomy were studied in coffee trees grown in nutrient solutions with or without Zn. Leaves and roots were sampled and cuts were made in the medium part of the leaves and in root tips and observed under an optical microscope. Plants grown without Zn showed an increase in root and in root stele diameter. There was also an increase in epidermis thickness and in the cross-sectional area of the cortex and stele due to Zn deficiency, but the diameter of xylem vessels was decreased. An increase in root cortex and stele diameter provided for an increased surface for nutrient uptake. Accordingly, C(min) was decreased from 13.8 to 3.4 mu mol L(-1) and V(max) increased from 0.50 to 2.1 mu mol cm(-2) h(-1) .

Origin of nuclear and chromosomal alterations derived from the action of an aneugenic agent-Trifluralin herbicide

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effect of processing conditions on the nucleation and growth of indium-tin-oxide nanowires made by pulsed laser ablation

Indium-tin oxide nanowires were deposited by excimer laser ablation onto catalyst-free oxidized silicon substrates at a low temperature of 500 degrees C in a nitrogen atmosphere. The nanowires have branches with spheres at the tips, indicating a vapor-liquid-solid (VLS) growth. The deposition time and pressure have a strong influence on the areal density and length of the nanowires. At the earlier stages of growth, lower pressures promote a larger number of nucleation centers. With the increase in deposition time, both the number and length of the wires increase up to an areal density of about 70 wires/mu m(2). After this point all the material arriving at the substrate is used for lengthening the existing wires and their branches. The nanowires present the single-crystalline cubic bixbyite structure of indium oxide, oriented in the [100] direction. These structures have potential applications in electrical and optical nanoscale devices.

Fault current test of a bifilar Bi-2212 bulk coil

A bifilar Bi-2212 bulk coil with parallel shunt resistor was tested under fault current condition using a 3 MVA single-phase transformer in a 220 V-60 Hz line achieving fault current peak of 8 kA. The fault current tests are performed from steady state peak current of 200 A by applying controlled short circuits up to 8 kA varying the time period from one to six cycles. The test results show the function of the shunt resistor providing homogeneous quench behavior of the HTS coil besides its intrinsic stabilizing role. The limiting current ratio achieves a factor 4.2 during 5 cycles without any degradation.

Generalised single-equation load flow method for unbalanced distribution systems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Heparin, heparin plus ASA and dipyridamole, and arteriovenous fistula as adjuvant methods to prevent rethrombosis after venous thrombectomy. Experimental study in rabbits

Venous rethrombosis following thrombectomy is a common event. The aim of the present study was to verify the action of heparin, heparin plus acetyl salicylic acid (ASA) and dipyridamole, and of an arteriovenous fistula (AVF) in the prevention of this complication. Thrombosis was induced in 48 male rabbits by the injection of thrombin in a segment of the left jugular vein, in which the blood flow was arrested for 10 minutes. After 48 hours, the animals were randomly allocated into one of 4 groups of treatment: (1) control, (2) subcutaneous heparin (600 S.I. Units/kg - 8/8 hours), (3) heparin, in the same dose, plus ASA (10 mg/kg/once a day), and dipyridamole (0.5 mg/kg thrice a day), (4) an AVF was surgically constructed between the left carotid after and the left maxillar vein. After 30 minutes, thrombectomy was performed. The venous blood flow, the hematocrit, activated partial thromboplastin time and thrombin time tests were performed before, right after the thrombectomy and 48 hours after thrombectomy. Venography was performed after thrombectomy and at the end of the experiment. The animals were killed 48 hours after thrombectomy and the veins were examined macroscopically. Venous rethrombosis was significantly prevented only in the AVF group (9/12), when compared to control group (0/12), heparin group (1/12) and heparin plus antiaggregating agents group (2/12). These results validate further clinical and experimental investigations with the use of AVF to prevent rethrombosis after venous thrombectomy, when a reduction of venous flow is present.

Litíase intrahepática primária. Relato de caso e revisão da literatura.

Primary intrahepatic lithiasis is an entity defined by intrahepatic stones exclusively located in the IH ducts above the emergence of the common bile duct. The disease is classified in two types: Eastern type (stones formed primarily in intrahepatic ducts; frequent in Japan) and Western type (stones formed in the extrahepatic bile system, usually in gallbladder, which migrate up to the intra-hepatic ducts). The mechanisms of lithogenesis in the entity are as yet not fully understood; multiple factors seem to operate synergistically: anatomical changes of the intrahepatic ducts, metabolic disorders, infections, idiopathic alteration. All these factors may facilitate biliary stasis leading ultimately to stone formation. We report on a case of and review the literature on primary intrahepatic lithiasis, which is a rare occurrence in the West and a disease of difficult surgical approach and high mortality.

Severe forms of neurocysticercosis: Treatment with albeimdazole

Study of 22 patients with the severe form of neurocysticercosis treated with albendazole (ABZ) administered in 6 different schedules ranging from 15 to 30 mg/kg/day for 21 to 60 days. Dextrochloropheniramine and ketoprofen were the adjuvant drugs Multiple symptoms were observed in 90 9% of patients. Intracranial hypertension was manifested in 90.9%. Hydrocephaly occurred in 86.4%. Evolution was satisfactory in 10 patients, 8 died and 4 had sequelae. Tomographic studies showed the appearance of an isolated IVth ventricle in 9 patients, after ventriculoperitoneal shunt, before ABZ treatment in 3 of them, during in 5 and after treatment in one. Median clinical follow-up duration was 10 months for the patients who died and 3-4 years for survivors. In 3 patients there was an increase in cyst size during the administration of the 15 mg/kg/day ABZ dose, which was not observed in any patient when the 30 mg/kg/day dose was used.

Methodology for kariological study of Brazilian Palms

In the laboratory of cytogenetics of the DBAA-UNESP we are studying the karyotipe of some Brazilian Palms. To determine the best protocol, methods of seed germination, inhibition of mitosis, time to pick up the roots and staining were analyzed. The results shown that the seed germination in sphagnum is effective to achieve good roots. The best time to collect the root tips is between 11 to 12 AM., when there are more cell metaphases. The inhibition of mitosis cycle at metaphases may be effective both with 8-hydroxiquinoleine (0,03% -5 hours) or with cold water (0°C - 18-20 hours). The staining with Giemsa 2% showed the best chromosome figures in the metaphases. Now, to get good metaphases slides the method in use in the lab is: 1) seed germination in sphagnum at room temperature and high humidity; 2) The major roots are cut maintaining at least 5 cm, because this technic allows new emergence of roots, increasing the number of roots collected per germinated seed, that is very important in some species with poor germination rates; 3) To get the mitosis inhibition we are using cold water (0°C) treatment for 18-20 hours, following the standard protocols for conservation and hydrolysis; or enzyme digestion with pectinasecellulase 4) the staining procedures are made using Giemsa 2%. The Brazilian palms species studied and their respective chromosome number were: Aiphanes acanthophylla (2n=30), A. caryotaefolia (2n=30), Syagrus quinquifaria (2n=32), S. coronata (2n=32), S. romanzoffiana (2n=32), Euterpe edulis (2n=36), E. oleracea (2n=36), Copernicia prunifera (2n=36), Scheelea lauromuelleriana (2n=32) and Bactris gasipaes (2n=30).

Evaluation of cutting patterns produced with air-abrasion systems using different tip designs.

This study assessed cavity preparations produced with different air abrasion tip parameters. Twelve test groups of extracted teeth were prepared to evaluate the parameters of 80 degrees or 45 degrees nozzle angles and 0.38 or 0.48 mm inner tip diameters. All other factors were held constant. A device was made to hold the specimen and air abrasion handpiece that standardized the distance and position relative to the tooth and time of application. The cavities were evaluated by assessing the rounding of the cavosurface margins and cavity floor. Measurements of cavosurface angles and the angle of concavity were made at the deepest portion of the abraded surface using scanning electron micrographs. The cavosurface angles were compared using paired t-test, and the effects of the tip design parameters were analyzed by ANOVA and Duncan's Multiple Range test. From the cavity patterns found in this study, the authors suggest that 80 degrees angle tips are more appropriate than 45 degrees angle tips for making narrow, deep cuts for preventive resin restorations. Conversely, when shallow preparations are needed, as in the case of Class V cavity preparations, cutting patterns of 45 degrees angle tips are more suitable.

Application of C-banding in two Arachis wild species, Arachis Pintoi Krapov. and W.C. Gregory and A. villosulicarpa Hoehne to mitotic chromosome analyses

Two wild diploid (2n = 20 chromosomes) and self-pollinating Arachis species, Arachis Pintoi Krapov and W.C. Gregory and A. villosulicarpa Hoehne were submmited to C-band technique to karyotype analyses. Root tips were employed in the analyses. Morphometric data chose that chromosome lengths varied from 3.12 in A. villosulicarpa to 1.45 in A. Pintoi. Karyotype formula obtained was 10sm to A. Pintoi and 9sm + 1m to A. villosulicarpa. There was a predominance of pericentromeric C-band in all mitotic metaphasic chromosomes in both species. Besides C-band values, both species still did not differ in respect to chromosome absolute and relative lengths, centromeric index, symmetry index and total karyotype haploid length. C-band and morphometric data did not show strong or significant differences which could separate these two species of peanut which belong to evolutive different sections.