Characterisation of a secretory serine protease inhibitor (SjB6) from Schistosoma japonicum

BACKGROUND: Proteins belonging to the serine protease inhibitor (serpin) superfamily play essential physiological roles in many organisms. In pathogens, serpins are thought to have evolved specifically to limit host immune responses by interfering with the host immune-stimulatory signals. Serpins are less well characterised in parasitic helminths, although some are thought to be involved in mechanisms associated with host immune modulation. In this study, we cloned and partially characterised a secretory serpin from Schistosoma japonicum termed SjB6, these findings provide the basis for possible functional roles.

METHODS: SjB6 gene was identified through database mining of our previously published microarray data, cloned and detailed sequence and structural analysis and comparative modelling carried out using various bioinformatics and proteomics tools. Gene transcriptional profiling was determined by real-time PCR and the expression of native protein determined by immunoblotting. An immunological profile of the recombinant protein produced in insect cells was determined by ELISA.

RESULTS: SjB6 contains an open reading frame of 1160 base pairs that encodes a protein of 387 amino acid residues. Detailed sequence analysis, comparative modelling and structural-based alignment revealed that SjB6 contains the essential structural motifs and consensus secondary structures typical of inhibitory serpins. The presence of an N-terminal signal sequence indicated that SjB6 is a secretory protein. Real-time data indicated that SjB6 is expressed exclusively in the intra-mammalian stage of the parasite life cycle with its highest expression levels in the egg stage (p < 0.0001). The native protein is approximately 60 kDa in size and recombinant SjB6 (rSjB6) was recognised strongly by sera from rats experimentally infected with S. japonicum.

CONCLUSIONS: The significantly high expression of SjB6 in schistosome eggs, when compared to other life cycle stages, suggests a possible association with disease pathology, while the strong reactivity of sera from experimentally infected rats against rSjB6 suggests that native SjB6 is released into host tissue and induces an immune response. This study presents a comprehensive demonstration of sequence and structural-based analysis of a secretory serpin from a trematode and suggests SjB6 may be associated with important functional roles in S. japonicum, particularly in parasite modulation of the host microenvironment.

Dynamic Simulation Methods for Evaluating Motor Vehicle and Roadway Design and Resolving Policy Issues, 1990

This study had three objectives: (1) to develop a comprehensive truck simulation that executes rapidly, has a modular program construction to allow variation of vehicle characteristics, and is able to realistically predict vehicle motion and the tire-road surface interaction forces; (2) to develop a model of doweled portland cement concrete pavement that can be used to determine slab deflection and stress at predetermined nodes, and that allows for the variation of traditional thickness design factors; and (3) to implement these two models on a work station with suitable menu driven modules so that both existing and proposed pavements can be evaluated with respect to design life, given specific characteristics of the heavy vehicles that will be using the facility. This report summarizes the work that has been performed during the first year of the study. Briefly, the following has been accomplished: A two dimensional model of a typical 3-S2 tractor-trailer combination was created. A finite element structural analysis program, ANSYS, was used to model the pavement. Computer runs have been performed varying the parameters defining both vehicle and road elements. The resulting time specific displacements for each node are plotted, and the displacement basin is generated for defined vehicles. Relative damage to the pavement can then be estimated. A damage function resulting from load replications must be assumed that will be reflected by further pavement deterioration. Comparison with actual damage on Interstate 80 will eventually allow verification of these procedures.

Relações interorganizacionais e eficiência coletiva: um estudo de caso no arranjo produtivo local de confecções do Agreste de Pernambuco

This work is a study in the Local Productive Arrangement of confections from Agreste of Pernambuco, as a relevant sector in economic and social aspect. This research has as central aim to understand how the inter-organizational relations influence the collective efficiency of arrangement. The theoretical framework employed highlights the approaches that deal with the benefits of business agglomeration for the develop­ment of firms and regions. It has discussed the approach of small and medium enter­ prises and industrial districts (SCHMITZ, 1997), which introduce the concept of col­ lective efficiency, explaining that only those externalities explained by Marshall (1996) are not sufficient to explain the competitive advantage of enterprises, expand­ing the idea that organizations achieve competitive advantage not acting alone. To examine the influences of relations in the collective efficiency, it has been taken as analytical perspective theory of social networks (GRANOVETTER, 1973, 1985; BURT, 1992; UZZI, 1997) because it has believe that this approach provides subsi­ dies for a structural analysis of social relationships in face the behavior of human ac­tion. By examining the organizations in a social network, you should understand the reason of this establishment of the relationship, their benefits, and as the information flow takes place and density of links between the actors (Powell; SMITH-DOERR, 1994). As for the methods, this study is characterized as a case study, in according to the purposed objectives, in addition to qualitative method. Also, due to recovering of the historical milestones of the arrangement, it is used a sectional approach with longitudinal perspective (VIEIRA, 2004). The primary and secondary data were used in order to understand the evolutionary process of the sector and their inter-actors re­ lationships in the arrangement for the promotion of development, for both, was used the contend and documentary analysis technique, respectively (DELLAGNELO ; SIL­VA, 2005). The approach of social networks has permitted understand that social re­lationships may extend the collective efficiency of the arrangement, and therefore need to develop policies that encourage the legalization of informal companies in ar­rangement, by showing up themselves representative. Thus, the relations estab­ lished in LPA of confections from Agreste of Pernambuco need for more effective mechanisms to broaden the collective efficiency. Therefore, this way as take place has directly benefited only a group of companies that are linked in some way the sup­portive institutions. So we can conclude that the inter-actor relations have limited the collective efficiency of LPA, being stimulated by the institutions in support only to groups of entrepreneurs, even those that produce external relations for all clustered companies

Dimensionamento de um edifício destinado a centro de dia para idosos e creche

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização em Estruturas

Projeto de estabilidade da alteração de um edifício de habitação multifamiliar

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil Estruturas

Optical emission spectroscopy as a process-monitoring tool in PECVD of amorphous carbon coatings

Dans ce projet de recherche, le dépôt des couches minces de carbone amorphe (généralement connu sous le nom de DLC pour Diamond-Like Carbon en anglais) par un procédé de dépôt chimique en phase vapeur assisté par plasma (ou PECVD pour Plasma Enhanced Chemical Vapor deposition en anglais) a été étudié en utilisant la Spectroscopie d’Émission Optique (OES) et l’analyse partielle par régression des moindres carrés (PLSR). L’objectif de ce mémoire est d’établir un modèle statistique pour prévoir les propriétés des revêtements DLC selon les paramètres du procédé de déposition ou selon les données acquises par OES. Deux séries d’analyse PLSR ont été réalisées. La première examine la corrélation entre les paramètres du procédé et les caractéristiques du plasma pour obtenir une meilleure compréhension du processus de dépôt. La deuxième série montre le potentiel de la technique d’OES comme outil de surveillance du procédé et de prédiction des propriétés de la couche déposée. Les résultats montrent que la prédiction des propriétés des revêtements DLC qui était possible jusqu’à maintenant en se basant sur les paramètres du procédé (la pression, la puissance, et le mode du plasma), serait envisageable désormais grâce aux informations obtenues par OES du plasma (particulièrement les indices qui sont reliées aux concentrations des espèces dans le plasma). En effet, les données obtenues par OES peuvent être utilisées pour surveiller directement le processus de dépôt plutôt que faire une étude complète de l’effet des paramètres du processus, ceux-ci étant strictement reliés au réacteur plasma et étant variables d’un laboratoire à l’autre. La perspective de l’application d’un modèle PLSR intégrant les données de l’OES est aussi démontrée dans cette recherche afin d’élaborer et surveiller un dépôt avec une structure graduelle.

Contributo e caracterização de PM da ressuspensão rodoviária

Nos últimos anos, tem-se assistido a um crescimento no interesse do estudo da ressuspensão de pó de estrada, dado o reconhecimento da importância que esta fração representa para os níveis de partículas atmosféricas em ambiente urbano. Dada a prematuridade deste tema e, de forma a compreender e conhecer a sua contribuição e caracterização, realizou-se um estudo sobre a ressuspensão de pó de estrada urbano para as cidades do Porto e Braga. No âmbito do projeto AIRUSE e URBE, realizaram-se amostragens de PM10 no terreno com um dispositivo de amostragem móvel e em ambiente laboratorial com uma câmara de ressuspensão, sendo posteriormente analisado o seu conteúdo carbonoso por um sistema de análise termo-ótico de transmitância e, os elementos por ICP-MS e ICP-AES. Da campanha in situ resultaram cargas de PM10 compreendidas entre 0.190 e 49.5 mg.m-2 para a cidade do Porto e 0.577 mg.m-2 para o túnel rodoviário em Braga. As amostras caracterizam-se por serem dominadas pelos elementos Al, Fe, K, e Ca e conterem enriquecimentos de Sb, Fe, Cu, Sn e Zn, fruto da contaminação antropogénica da atividade rodoviária. No que respeita às amostragens em laboratório, utilizou-se uma câmara de ressuspensão e o dispositivo móvel aplicado na campanha anteriormente descrita para estudar e caracterizar a fração PM10 do pó de estrada urbano proveniente do Túnel Avenida da Liberdade (Braga). Os resultados obtidos para as duas metodologias foram de um modo geral similares, com o carbono total a representar cerca de 6% da massa total de PM10. Esta última é composta maioritariamente por Al, Fe, Ca e K, elementos característicos da crosta terrestre. Quanto ao fatores de enriquecimento calculados, denotou-se a presença de Sb, Zn, Cu e Sn, tendo-se associando ao desgaste dos travões e pneus.

Análise da fluência em vigas de concreto armado simplesmente apoiadas usando o método dos elementos finitos

Reinforced concrete creep is a phenomenon of great importance. Despite being appointed as the main cause of several pathologies, its effects are yet considered in a simplified way by the structural designers. In addition to studying the phenomenon in reinforced concrete structures and its current account used in the structural analysis, this paper compares creep strains at simply supported reinforced concrete beams in analytical and in experimental forms with the finite element method (FEM) simulation results. The strains and deflections obtained through the analytical form were calculated with the Brazilian code NBR 6118 (2014) recommendations and the simplified method from CEB-FIP 90 and the experimental results were extracted from tests available in the literature. Finite element simulations are performed using ANSYS Workbench software, using its 3D SOLID 186 elements and the structure symmetry. Analyzes of convergence using 2D PLANE 183 elements are held as well. At the end, it is concluded that FEM analyses are quantitative and qualitative efficient for the estimation of this non-linearity and that the method utilized to obtain the creep coefficients values is sufficiently accurate.

X-Ray crystal structure of [Cu2OH(O2CCF 3)3(quinoline)2]2, a tetranuclear basic copper(II) carboxylate adduct with significant metal-metal interaction

The basic copper(II) carboxylate adduct, [Cu2-OH(O 2CCF3)3(quinoline)2]2, has been shown by an X-ray structural analysis to have a novel tetranuclear structure; magnetic susceptibility data show that substantial Cu-Cu interaction is present in this compound.

Determinantes de los contratos implícitos y explícitos en la contratación gerencial

Este artículo resalta la importancia de los determinantes en la existencia de contratos explícitos e implícitos en la contratación de gerentes, no considerados en el estudio previo de Gillan et. al. Se muestra como la asimetría de información, el contexto institucional y el poder con que la firma y el gerente enfrentan el acuerdo laboral influyen de manera directa el tipo de contrato. Se concluye planteando como argumento central que existen dos clases de determinantes: los de influencia y los de mediación. Los de mediación cobran sentido cuando están explícitamente relacionados con los de influencia. Los de influencia se combinan entre si en una situación dada y ejercen influencia sobre los de mediación. Estos últimos son los que determinan la propensión hacia el tipo de contrato, y son tres: El valor esperado de la pérdida ante la probabilidad de incumplimiento, el poder con que gerente y firma enfrentan el acuerdo y la posibilidad de comportamiento oportunista, los demás son clasificados como de influencia. Este argumento es contrastado mediante el uso de la técnica de análisis estructural.

Projeto de estabilidade de um edifício para uma sala elétrica em betão armado e estrutura metálica

Trabalho de Projeto para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização Estruturas

Potencial terapêutico de um heparinóide isolado do invertebrado marinho Litopenaeus vannamei

The occurrence of bioactive compounds in marine organisms comes awaking the interest of the pharmaceutical industry. Heparin, a sulfated polysaccharide which presence was already identified in several marine invertebrates, is very attractive due its remarkable functional versatility. Besides to intervene in blood coagulation, this molecule has a great anti-inflammatory potential. However, its strong anticoagulant activity difficult the clinical exploitation of its anti-inflammatory properties. Thus, the aims of this work were to evaluate the effect of a heparin-like compound (heparinoid), isolated from the cephalotorax of the Litopenaeus vannamei shrimp, on the inflammatory response, hemostasia and synthesis of antithrombotic heparan sulfate by endothelial cells, besides studying some aspects concerning its structure. The purified heparinoid was structurally characterized following an analytical boarding, involving electrophoresis and chromatography. The structural analysis have shown that this compound possess a high content of glucuronic acid residues and disulfated disaccharide units. In contrast to mammalian heparin, the heparinoid was incapable to stimulate the synthesis of heparan sulfate by endothelial cells in the tested concentrations, beyond to show reduced anticoagulant activity and hemorrhagic effect. In a model of acute inflammation, the compound isolated from the shrimp reduced more than 50% of the cellular infiltration. Besides reduce the activity of MMP-9 and proMMP-2 of the peritoneal lavage of inflamed animals, the heparinoid also reduced the activity of MMP-9 secreted by activated human leukocytes. These results demonstrate the potential of heparinoid from L. vannamei to intervene in the inflammatory response. For possessing reduced anticoagulant activity and hemorrhagic effect, this compound can serve as a structural model to direct the development of more specific therapeutical agents to the treatment of inflammatory diseases

Nanoestruturas multicomponentes de CoFe2O4/Ag visando aplicações biológicas

Dissertação (mestrado)—Universidade de Brasília, Instituto de Física, Programa de Pós-Graduação em Física, 2015.

Análisis del nivel de aceptación del diario vespertino La Tarde en la ciudad de Cuenca

La propuesta del presente trabajo es conocer el resultado del nivel de aceptación del público del medio de comunicación cuencano vespertino, diario La Tarde. Con este motivo, en el primer capítulo se presentan los antecedentes del nacimiento de la prensa y su incorporación en Cuenca alrededor de 1822. Previo a entrar en el análisis propio de los medios, se hace un recorrido por las principales teorías del periodismo: teoría del espejo, newsmaking, gatekeeper, agenda setting, instrumentalista, espiral del silencio; entre otras. En el segundo capítulo se analiza diario La Tarde, su logotipo, estudios de mercado, perfil de los lectores, análisis de la competencia, FODA; así como su análisis estructural detallando el proceso de impresión, técnico, valorativo y noticioso. El tercer capítulo se enfoca al análisis de la preferencia de los lectores, la frecuencia de lectura y horas preferidas, usos de medios digitales, secciones que más le gustan, secciones que implementaría y otros aspectos que permiten medir el grado de satisfacción ante la presencia de este diario cuencano. Para ello se aplicó una encuesta en las parroquias: Gil Ramírez Dávalos, El Sagrario y San Blas, en la cual se recaudaron datos por medio de un cuestionario prediseñado aplicado en un universo de 147 personas. Entre los resultados del estudio a pesar de los pocos años de creación de La Tarde, se evidenció que su presencia en el mercado no es del todo sólida, lo que impide ampliar su mercado.

Exploring redox-driven self-assembly of mixed metal polyoxometalates

How can we control the experimental conditions towards the isolation of specific structures? Why do particular architectures form? These are some challenging questions that synthetic chemists try to answer, specifically within polyoxometalate (POM) chemistry, where there is still much unknown regarding the synthesis of novel molecular structures in a controlled and predictive manner. This work covers a wide range of POM chemistry, exploring the redox self-assembly of polyoxometalate clusters, using both “one-pot”, flow and hydrothermal conditions. For this purpose, different vanadium, molybdenum and tungsten reagents, heteroatoms, inorganic salts and reducing agents have been used. The template effect of lone-pair containing pyramidal heteroatoms has been investigated. Efforts to synthesize new POM clusters displaying pyramidal heteroanions (XO32-, where X= S, Se, Te, P) are reported. The reaction of molybdenum with vanadium in the presence of XO32- heteroatoms is explored, showing how via the cation and experimental control it is possible to direct the self-assembly process and to isolate isostructural compounds. A series of four isostructural (two new, namely {Mo11V7P} and {Mo11V7Te} and two already known, namely {Mo11V7Se} and {Mo11V7S} disordered egg-shaped Polyoxometalates have been reported. The compounds were characterized by X-ray structural analysis, TGA, UV-Vis, FT-IR, Elemental and Flame Atomic Absorption Spectroscopy (FAAS) analysis and Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES). Cyclic Voltammetry measurements have been carried out in all four compounds showing the effect of the ionic density of the heteroatom on the potential. High-Resolution ESI-MS studies have revealed that the structures retain their integrity in solution. Efforts to synthesize new mixed-metal compounds led to isolation, structural, and electronic characterization of the theoretically predicted, but experimentally elusive δ-isomer of the Keggin polyoxometalate cluster anion, {H2W4V9O33(C6H13NO3)}, by the reaction of tungstate(VI) and vanadium(V) with triethanolammonium ions (TEAH), acting as a tripodal ligand grafted to the surface of the cluster. Control experiments (in the absence of the organic compound) have proven that the tripodal ligand plays crucial role on the formation of the isomer. The six vanadium metal centres, which consist the upper part of the cluster, are bonded to the “capping” TEA tripodal ligand. This metal-ligand bonding directs and stabilises the formation of the final product. The δ-Keggin species was characterized by single-crystal X-ray diffraction, FT-IR, UV-vis, NMR and ESI-MS spectrometry. Electronic structure and structure-stability correlations were evaluated by means of DFT calculations. The compounds exhibited photochromic properties by undergoing single-crystal-to-single-crystal (SC-SC) transformations and changing colour under light. Non-conventional synthetic approaches are also used for the synthesis of the POM clusters comparing the classical “one-pot” reaction conditions and exploring the synthetic parameters of the synthesis of POM compounds. Reactions under hydrothermal and flow conditions, where single crystals that depend on the solubility of the minerals under hot water and high pressure can be synthesized, resulted in the isolation of two isostructural compounds, namely, {Mo12V3Te5}. The compound isolated from a continuous processing method, crystallizes in a hexagonal crystal system, forming a 2D porous plane net, while the compound isolated using hard experimental conditions (high temperature and pressure) crystallizes in monoclinic system, resulting in a different packing configuration. Utilizing these alternative synthetic approaches, the most kinetically and thermodynamically compounds would possibly be isolated. These compounds were characterised by single-crystal X-ray diffraction, FT-IR and UV-vis spectroscopy. Finally, the redox-controlled driven oscillatory template exchange between phosphate (P) and vanadate (V) anions enclosed in an {M18O54(XO4)2} cluster is further investigated using UV-vis spectroscopy as a function of reaction time, showed that more than six complete oscillations interconverting the capsule species present in solution from {P2M18} to {V2M18} were possible, provided that a sufficient concentration of the TEA reducing agent was present in solution. In an effort to investigate the periodicity of the exchange of the phosphate and vanadate anions, time dependent Uv-vis measurements were performed for a period at a range of 170-550 hours. Different experimental conditions were also applied in order to investigate the role of the reducing agent, as well as the effect of other experimental variables on the oscillatory system.