Expectations and challenges : the implementation of mobile devices in a Scottish primary school

Acknowledgements Sincere thanks are due to all who have contributed to this study, which was funded in part by the Local Authority. The Head Teacher and Local Authority Officer have been instrumental in encouraging and supporting the research and the teachers and pupils at the school, along with several local authority support staff, have contributed directly. Colleagues from the University of Aberdeen, including Prof Do Coyle, Dr Yvonne Bain, and Phil Marston, helped to guide the project and provided useful feedback.

Expectations and challenges : the implementation of mobile devices in a Scottish primary school

Acknowledgements Sincere thanks are due to all who have contributed to this study, which was funded in part by the Local Authority. The Head Teacher and Local Authority Officer have been instrumental in encouraging and supporting the research and the teachers and pupils at the school, along with several local authority support staff, have contributed directly. Colleagues from the University of Aberdeen, including Prof Do Coyle, Dr Yvonne Bain, and Phil Marston, helped to guide the project and provided useful feedback.

Two devices, each of which measure water velocity; on the right is an acoustic device that is permanently maintained at Gumbo Limbo by PI Rene Price; on the left is a 3D camera with a long fiberoptic lens, deployed for testing purposes by collaborator Evan Variano.

http://digitalcommons.fiu.edu/fce_lter_photos/1303/thumbnail.jpg

Achieving Energy Saving through Proxying Applications on behalf of Idle Devices

Several studies in the past have revealed that network end user devices are left powered up 24/7 even when idle just for the sake of maintaining Internet connectivity. Network devices normally support low power states but are kept inactive due to their inability to maintain network connectivity. The Network Connectivity Proxy (NCP) has recently been proposed as an effective mechanism to impersonate network connectivity on behalf of high power devices and enable them to sleep when idle without losing network presence. The NCP can efficiently proxy basic networking protocol, however, proxying of Internet based applications have no absolute solution due to dynamic and non-predictable nature of the packets they are sending and receiving periodically. This paper proposes an approach for proxying Internet based applications and presents the basic software architectures and capabilities. Further, this paper also practically evaluates the proposed framework and analyzes expected energy savings achievable under-different realistic conditions.

Hydrodynamics of domain walls in ferroelectrics and multiferroics: Impact on memory devices

The standard “Kittel Law” for the thickness and shape of ferroelectric, ferroelastic, or ferromagnet domains assumes mechanical equilibrium. The present paper shows that such domains may be highly nonequilibrium, with unusual thicknesses and shapes. In lead germanate and multiferroic lead zirconate titanate iron tantalate domain wall instabilities resemble hydrodynamics (Richtmyer–Meshkov and Helfrich–Hurault, respectively).

Investigations on selected chalcogenide glasses towards the realization of photonic devices

Among various optical sensing schemes, infrared spectroscopy is a powerful tool for detecting and determining the composition of complex organic samples since vibrational finger prints of all biomolecules and organic species are located in this window. This spectroscopic technique is simple, reliable, fast, non-destructive, cost-effective while having low sensitivity. Use of metallic nanoparticles in association with a good IR transparent sensing substrate, is one of the promising solutions to enhance the sensitivity. Chalcogenide glasses are promising substrate material because of their extended optical transmission window starting from the visible to the far infrared range up to 20 μm, high refractive index usually between 2 and 3 and high optical nonlinearity, which make them good candidates as IR sensors and optical ultrafast nonlinear devices. These glasses are favorable sensor materials for the infrared spectral range because of their high IR transparency to allow for low optical loss at wavelengths corresponding to the characteristic optical absorption bands of organic molecules, high refractive index for tight confinement of optical energy within the resonator structure, processibility into thin film form, chemical compatibility for adhesion of silver nano particles and thin films and resistance to the chemical environment to be sensed. Molecules adsorbed to silver island structures shows enhanced IR absorption spectra and the extent of enhancement is determined by many factors such as the size, density and morphology of silver structures, optical and dielectric properties of the substrate material etc.

The Impact of Student Response Systems on the Learning Experience of Undergraduate Psychology Students

Student response systems (SRS) are hand-held devices or mobile phone polling systems which collate real-time, individual responses to on-screen questions. Previous research examining their role in higher education has highlighted both advantages and disadvantages of their use. This paper explores how different SRS influence the learning experience of psychology students across different levels of their programme. Across two studies, first year students’ experience of using Turningpoint clickers and second year students’ experience of using Poll Everywhere was investigated. Evaluations of both studies revealed that SRS has a number of positive impacts on learning, including enhanced engagement, active learning, peer interaction, and formative feedback. Technical and practical issues emerged as consistent barriers to the use of SRS. Discussion of these findings and the authors’ collective experiences of these technologies are used to provide insight into the way in which SRS can be effectively integrated within undergraduate psychology programmes.

Secure Web Service Clients on Mobile Devices

Enterprise apps on mobile devices typically need to communicate with other system components by consuming web services. Since most of the current mobile device platforms (such as Android) do not provide built-in features for consuming SOAP services, extensions have to be designed. Additionally in order to accommodate the typical enhanced security requirements of enterprise apps, it is important to be able to deal with SOAP web service security extensions on client side. In this article we show that neither the built-in SOAP capabilities for Android web service clients are sufficient for enterprise apps nor are the necessary security features supported by the platform as is. After discussing different existing extensions making Android devices SOAP capable we explain why none of them is really satisfactory in an enterprise context. Then we present our own solution which accommodates not only SOAP but also the WS-Security features on top of SOAP. Our solution heavily relies on code generation in order to keep the flexibility benefits of SOAP on one hand while still keeping the development effort manageable for software development. Our approach provides a good foundation for the implementation of other SOAP extensions apart from security on the Android platform as well. In addition our solution based on the gSOAP framework may be used for other mobile platforms in a similar manner.

A Research of Resource Scheduling Algorithm Based on Hadoop

With the development of electronic devices, more and more mobile clients are connected to the Internet and they generate massive data every day. We live in an age of “Big Data”, and every day we generate hundreds of million magnitude data. By analyzing the data and making prediction, we can carry out better development plan. Unfortunately, traditional computation framework cannot meet the demand, so the Hadoop would be put forward. First the paper introduces the background and development status of Hadoop, compares the MapReduce in Hadoop 1.0 and YARN in Hadoop 2.0, and analyzes the advantages and disadvantages of them. Because the resource management module is the core role of YARN, so next the paper would research about the resource allocation module including the resource management, resource allocation algorithm, resource preemption model and the whole resource scheduling process from applying resource to finishing allocation. Also it would introduce the FIFO Scheduler, Capacity Scheduler, and Fair Scheduler and compare them. The main work has been done in this paper is researching and analyzing the Dominant Resource Fair algorithm of YARN, putting forward a maximum resource utilization algorithm based on Dominant Resource Fair algorithm. The paper also provides a suggestion to improve the unreasonable facts in resource preemption model. Emphasizing “fairness” during resource allocation is the core concept of Dominant Resource Fair algorithm of YARM. Because the cluster is multiple users and multiple resources, so the user’s resource request is multiple too. The DRF algorithm would divide the user’s resources into dominant resource and normal resource. For a user, the dominant resource is the one whose share is highest among all the request resources, others are normal resource. The DRF algorithm requires the dominant resource share of each user being equal. But for these cases where different users’ dominant resource amount differs greatly, emphasizing “fairness” is not suitable and can’t promote the resource utilization of the cluster. By analyzing these cases, this thesis puts forward a new allocation algorithm based on DRF. The new algorithm takes the “fairness” into consideration but not the main principle. Maximizing the resource utilization is the main principle and goal of the new algorithm. According to comparing the result of the DRF and new algorithm based on DRF, we found that the new algorithm has more high resource utilization than DRF. The last part of the thesis is to install the environment of YARN and use the Scheduler Load Simulator (SLS) to simulate the cluster environment.

Creating Common Ground: Architecture For Tactical Learning and Creative Convergence

Certain environments can inhibit learning and stifle enthusiasm, while others enhance learning or stimulate curiosity. Furthermore, in a world where technological change is accelerating we could ask how might architecture connect resource abundant and resource scarce innovation environments? Innovation environments developed out of necessity within urban villages and those developed with high intention and expectation within more institutionalized settings share a framework of opportunity for addressing change through learning and education. This thesis investigates formal and informal learning environments and how architecture can stimulate curiosity, enrich learning, create common ground, and expand access to education. The reason for this thesis exploration is to better understand how architects might design inclusive environments that bring people together to build sustainable infrastructure encouraging innovation and adaptation to change for years to come. The context of this thesis is largely based on Colin McFarlane’s theory that the “city is an assemblage for learning” The socio-spatial perspective in urbanism, considers how built infrastructure and society interact. Through the urban realm, inhabitants learn to negotiate people, space, politics, and resources affecting their daily lives. The city is therefore a dynamic field of emergent possibility. This thesis uses the city as a lens through which the boundaries between informal and formal logics as well as the public and private might be blurred. Through analytical processes I have examined the environmental devices and assemblage of factors that consistently provide conditions through which learning may thrive. These parameters that make a creative space significant can help suggest the design of common ground environments through which innovation is catalyzed.

Implications of TiO2 surface functionalization on polycrystalline mixed halide perovskite films and photovoltaic devices

We exploit TiO2 surface functionalization as a tool to induce the crystallization process of CH3NH3PbI3xClx perovskite thin films resulting in a reduction of the degree of orientation of the (110) crystallographic planes. Notably, the variation of the film crystalline orientational order does not affect the photovoltaic performances of the perovskite-based devices, whose efficiency remains mostly unchanged. Our findings suggest that other factors are more significant in determining the device efficiency, such as the non-homogenous coverage of the TiO2 surface causing charge recombination at the organic/TiO2 interface, defect distribution on the perovskite bulk and at the interfaces, and transport in the organic or TiO2 layer. This observation represents a step towards the comprehension of the perovskite film peculiarities influencing the photovoltaic efficiency for high performance devices.

A Comparison of Geo-tagging in Mobile Internet Browsing Applications on iOS and Android.

Nowadays there is almost no crime committed without a trace of digital evidence, and since the advanced functionality of mobile devices today can be exploited to assist in crime, the need for mobile forensics is imperative. Many of the mobile applications available today, including internet browsers, will request the user’s permission to access their current location when in use. This geolocation data is subsequently stored and managed by that application's underlying database files. If recovered from a device during a forensic investigation, such GPS evidence and track points could hold major evidentiary value for a case. The aim of this paper is to examine and compare to what extent geolocation data is available from the iOS and Android operating systems. We focus particularly on geolocation data recovered from internet browsing applications, comparing the native Safari and Browser apps with Google Chrome, downloaded on to both platforms. All browsers were used over a period of several days at various locations to generate comparable test data for analysis. Results show considerable differences not only in the storage locations and formats, but also in the amount of geolocation data stored by different browsers and on different operating systems.

Cyber foraging for green computing, improving performance and prolonging battery life of mobile devices

The increasing dependency of everyday life on mobile devices also increases the number and complexity of computing tasks to be supported by these devices. However, the inherent requirement of mobility restricts them from being resources rich both in terms of energy (battery capacity) and other computing resources such as processing capacity, memory and other resources. This thesis looks into cyber foraging technique of offloading computing tasks. Various experiments on android mobile devices are carried out to evaluate offloading benefits in terms of sustainability advantage, prolonging battery life and augmenting the performance of mobile devices. This thesis considers two scenarios of cyber foraging namely opportunistic offloading and competitive offloading. These results show that the offloading scenarios are important for both green computing and resource augmentation of mobile devices. A significant advantage in battery life gain and performance enhancement is obtained. Moreover, cyber foraging is proved to be efficient in minimizing energy consumption per computing tasks. The work is based on scavenger cyber foraging system. In addition, the work can be used as a basis for studying cyber foraging and other similar approaches such as mobile cloud/edge computing for internet of things devices and improving the user experiences of applications by minimizing latencies through the use of potential nearby surrogates.

Biofouling protection by electro-chlorination on optical windows for oceanographic sensors and imaging devices

Oceans environmental monitoring and seafloor exploitation need in situ sensors and optical devices (cameras, lights) in various locations and on various carriers in order to initiate and to calibrate environmental models or to operate underwater industrial process supervision. For more than 10 years Ifremer deploys in situ monitoring systems for various seawater parameters and in situ observation systems based on lights and HD Cameras. To be economically operational, these systems must be equipped with a biofouling protection dedicated to the sensors and optical devices used in situ. Indeed, biofouling, in less than 15 days [1] will modify the transducing interfaces of the sensors and causes unacceptable bias on the measurements provided by the in situ monitoring system. In the same way biofouling will decrease the optical properties of windows and thus altering the lighting and the quality fot he images recorded by the camera.