Degradação do PMMA através da reação despolimerização uitlizando catalisadores de óxidos mistos

In this work, mixed oxides were synthesized by two methods: polymeric precursor and gel-combustion. The oxides, Niquelate of Lanthanum, Cobaltate of Lanthanum and Cuprate of Lanthanum were synthesized by the polymeric precursor method, and treated at 300 º C for 2 hours, calcined at 800 º C for 6h in air atmosphere. In gel-combustion method were produced and oxides using urea and citric acid as fuel, forming for each fuel the following oxides Ferrate of Lanthanum, Cobaltato of Lanthanum and Ferrato of Cobalt and Lanthanum, which were submitted to the combustion process assisted by microwave power maximum of 10min. The samples were characterized by: thermogravimetric analysis, X-ray diffraction; fisisorção of N2 (BET method) and scanning electron microscopy. The reactions catalytic of depolymerization of poly (methyl methacrylate), were performed in a reactor of silica, with catalytic and heating system equipped with a data acquisition system and the gas chromatograph. For the catalysts synthesized using the polymeric precursor method, the cuprate of lanthanum was best for the depolymerization of the recycled polymer, obtaining 100% conversion in less time 554 (min), and the pure polymer, was the Niquelate of Lanthanum, with 100% conversion in less time 314 (min). By gel-combustion method using urea as fuel which was the best result obtained Ferrate of Lanthanum for the pure polymer with 100% conversion in less time 657 (min), and the recycled polymer was Cobaltate of Lanthanum with 100 % conversion in less time 779 (min). And using citric acid to obtain the best result for the pure polymer, was Ferrate of Lanthanum with 100% conversion in less time 821 (min and) for the recycled polymer, was Ferrate of Lanthanum with 98.28% conversion in less time 635 (min)

Doses de nitrogênio e milho 2ª safra consorciado com braquiária ruziziensis.

O objetivo deste trabalho foi avaliar a produtividade de grãos do milho 2ª Safra em sucessão à soja, em função das doses de nitrogênio em cultivo solteiro ou consorciado com braquiária ruziziensis.

Alergia à picada de Himenópteros em cães

Dissertação de Mestrado Integrado em Medicina Veterinária

Aplicação de modelo matemático em sistema de lamas ativadas na estação de tratamento de águas residuais de Albufeira Poente

Dissertação de Mestrado, Engenharia do Ambiente, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Produção de bioetanol, usando soro do queijo como fonte de carbono. Screening de uma estirpe de levedura competente

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Transformação direta de lamas primárias papeleiras em bioprodutos: um desafio à bioengenharia

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

Produção de bioetanol por uma cultura mista de leveduras a partir de um substrato misto de alfarroba e soro de queijo

Dissertação de Mestrado, Engenharia Biológica, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2014

A study on the deployment of GA in a grid computing framework

Dissertação de Mestrado, Engenharia Informática, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2015

Impacto da utilização de ácido gálhico, ácido ferúlico e eugenol em modo contínuo na suscetibilidade de Pseudomonas aeruginosa

Dissertação de Mestrado, Biologia Molecular e Microbiana, Faculdade de Ciências e Tecnologia, Universidade do Algarve, 2016

Functions of code-switching in multilingual student community

Dissertação de Mestrado, Ciências da Linguagem, Faculdade de Ciências Humanas e Sociais, Universidade do Algarve, 2013

Desenvolvimento de bioblendas poliméricas a partir de gelatina bovina e de tilápia com amido de milho

The natural raw materials acquired special importance beside the mineral raw materials with the need for using alternative sources to oil, because they can be used to produce biopolymers. Gelatin, produced from the denaturation of collagen, and starch, an abundant polysaccharide in various plants, are examples of biopolymers which have several technological applications, especially in films. The objective of this work is to produce polymeric bioblends with gelatin and corn starch using two types of gelatin: commercial bovine gelatin and gelatin produced from mechanically separated flesh of tilapia (Oreochromis niloticus). For the extraction of tilapia gelatin 3 distinct pretreatments, followed by extraction in distilled water under heating were performed. The properties of gelatin extracted were similar to bovine gelatin, and the differences can be explained by the difference in extraction processes and sources. Blends of commercial gelatin and starch were produced in an internal mixer from a Haake torque rheometer, to study the behavior of the gelatin mixture with starch, thus, the same compositions were processed by twin screw extrusion, to define the mixing parameters. Subsequently, the extrusion of blends of tilapia gelatin and corn starch was carried out in the same twin screw extruder. The physico-chemical, rheological and morphological properties of the blends with thermoplastic starch and gelatin were studied. It was found that various properties vary linearly with increasing concentration of the components. The blends produced are immiscible, and among the two gelatins, tilapia gelatin showed a better interfacial adhesion with the corn starch. Regarding the morphology, gelatins formed the dispersed phase in all compositions studied, even in compositions rich in starch. Can be concluded that the procedure for tilapia gelatin extraction is feasible and advantageous, and the increasing in its scale to a reactor of 30 liters is possible, with a satisfactory yield. The bioblends of bovine gelatin/corn starch and tilapia gelatin/corn starch were successfully produced, and the processing conditions were appropriate

O espaço público como elemento agregador de uma augi

Dissertação para obtenção do grau de Mestre em Arquitectura, apresentada na Universidade de Lisboa - Faculdade de Arquitectura.

Compósitos de matriz metálica à base níquel com adição de TaC e NbC produzidos via metalurgia do pó

Carbide reinforced metallic alloys potentially improve some important mechanical properties required for the overall use of important engineering materials such as steel and nickel. Nevertheless, improved performance is achieved not only by composition enhancement but also by adequate processing techniques, such as novel sintering methods in the case of powder metallurgy. The method minimizes energy losses in addition to providing uniform heating during sintering. Thus, the general objective of this study was to evaluate the density, hardness, flexural strength, dilatometric behavior and to analyze the microstructure of metal matrix composites based nickel with addition of carbides of tantalum and / or niobium when sintered in a conventional furnace and Plasma assisted debinding and sintering (PADS). Initially, were defineds best parameters of granulation, screening and mixing procedure. After, mixtures of carbonyl Ni and 5%, 10% and 15 wt.% NbC and TaC were prepared in a Y-type mixer under wet conditions during 60 minutes. The mixtures were then dried and granulated using 1.5 wt. % paraffin diluted in hexane. Granulates were cold pressed under 600 MPa. Paraffin was then removed from the pressed pellets during a pre-sintering process carried out in a tubular furnace at 500 °C during 30 min. The heating rate was 3 ºC/min. The pellets were then sintered using either a plasma assisted reactor or a conventional resistive tubular furnace. For both methods, the heating rate was set to 8 ºC/min up to 1150 °C. The holding time was 60 minutes. The microstructure of the sintered samples was evaluated by SEM. Brinell hardness tests were also carried out. The results revealed that higher density and higher hardness values were observed in the plasma-assisted sintered samples. Hardness increased with the concentration of carbides in the Ni-matrix. The flexural strength also increased by adding the carbides. The decline was larger for the sample with addition of 5% 5% TaC and NbC. In general, compositions containing added carbide 10% showed less porous and more uniform distribution of carbides in the nickel matrix microstructural appearance. Thus, both added carbide and plasma sintering improved density, hardness, flexural strength and microstructural appearance of the composites

Parametros de solo em funcao da umidade na capacidade de campo em areas irrigaveis do tropico Semi-Arido brasileiro.

Simula-se, atraves de um modelo matematico sequencial os principais parametros do solo: estimativas de umidade no ponto de murcha permanente (PMP) a 1,5 MPa, e curvas de retencao de agua por meio da correspondencia da umidade do solo no ponto de capacidade de campo (CC). Usando-se tecnicas de superficies de resposta, obtiveram-se as classificacoes texturais em funcao da disponibilidade total de agua no solo (DTA), em m3/ha por cm, que facilitou a aplicacao pratica dos resultados. O modelo, com base na analise de 4.288 amostras, permite estimar as variaveis relacionadas com um grau de significancia superior a 0,01. A validacao do campo mostrou ser aplicavel aos agricultores de areas irrigaveis que ainda nao tem acesso as informacoes obtidas em laboratorio.

Metodologia para adequacao de parametros do metodo de irrigacao por sulcos para uso pela assistencia tecnica.

Descreve-se uma metodologia de analise e representacao de dados de pesquisa sobre parametros do metodo de irrigacao por sulcos. Na coleta de ados usou-se um oxissolo (latossolo 37 AB) do Projeto de Irrigacao de Bebedouro. Fizeram-se determinacoes de densidade aparente, curvas de retencao de umidade, infiltracao ao nivel de 50% de agua disponivel, e testes de avanco de agua em sulcos com diferentes declividades e vazoes: 0,15% (2,5 - 3,1 - 4 - 5 litros/seg.), 0,24% (2 - 2,5 - 3 litros/seg.) e 0,37% (1 - 1,5 - 2,5 litros/seg.). A profundidade efetiva do sistema radicular das culturas e definida em funcao do ciclo fenologico. A vazao maxima nao-erosiva e mais eficiente foi definida a partir dos dados dos testes de avanco de agua nos sulcos, sendo que se as combinacoes mais eficientes de vazao-declividade foram: 2,5 litros/seg. -0,15%, 2 litros/seg. -0,24% e 1,5 litros/seg. -0,37%. Os dados foram analisados para responder a pergunta "quando irrigar", construindo-se nomogramas para menejo de irrigacao, visando seu uso rapido pela assistencia tecnica. Os nomogramas, usados em forma sequencial, permitem definir: profundidade efetiva das raizes em funcao do tempo apos o plantio, lamina de reposicao em funcao do nivel de agua disponivel e profundidade do sistema radicular, vazao mais eficiente em funcao da declividade dos sulcos, eficiencia de aplicacao em funcao do comprimento de sulcos e combinacao vazao-declividade, e tempo de irrigacao em funcao da lamina bruto e comprimento de sulcos. A metodologia pode ser extrapolada e deve ser aplicada em cada solo.