Electron Transfer and Ligand Binding Properties of Cytochromes

Dissertation presented to obtain the Ph.D degree in Biochemistry

On the physical-chemical properties of ceramide C16

Dissertation presented to obtain the Ph.D degree in Chemistry.

Synchronization properties of multi-oscillator circadian systems

Dissertation presented to obtain the Ph.D degree in Computational Biology

Design and development of a microfluidic platform for use with colorimetric gold nanoprobe assays

Due to the importance and wide applications of the DNA analysis, there is a need to make genetic analysis more available and more affordable. As such, the aim of this PhD thesis is to optimize a colorimetric DNA biosensor based on gold nanoprobes developed in CEMOP by reducing its price and the needed volume of solution without compromising the device sensitivity and reliability, towards the point of care use. Firstly, the price of the biosensor was decreased by replacing the silicon photodetector by a low cost, solution processed TiO2 photodetector. To further reduce the photodetector price, a novel fabrication method was developed: a cost-effective inkjet printing technology that enabled to increase TiO2 surface area. Secondly, the DNA biosensor was optimized by means of microfluidics that offer advantages of miniaturization, much lower sample/reagents consumption, enhanced system performance and functionality by integrating different components. In the developed microfluidic platform, the optical path length was extended by detecting along the channel and the light was transmitted by optical fibres enabling to guide the light very close to the analysed solution. Microfluidic chip of high aspect ratio (~13), smooth and nearly vertical sidewalls was fabricated in PDMS using a SU-8 mould for patterning. The platform coupled to the gold nanoprobe assay enabled detection of Mycobacterium tuberculosis using 3 8l on DNA solution, i.e. 20 times less than in the previous state-of-the-art. Subsequently, the bio-microfluidic platform was optimized in terms of cost, electrical signal processing and sensitivity to colour variation, yielding 160% improvement of colorimetric AuNPs analysis. Planar microlenses were incorporated to converge light into the sample and then to the output fibre core increasing 6 times the signal-to-losses ratio. The optimized platform enabled detection of single nucleotide polymorphism related with obesity risk (FTO) using target DNA concentration below the limit of detection of the conventionally used microplate reader (i.e. 15 ng/μl) with 10 times lower solution volume (3 μl). The combination of the unique optical properties of gold nanoprobes with microfluidic platform resulted in sensitive and accurate sensor for single nucleotide polymorphism detection operating using small volumes of solutions and without the need for substrate functionalization or sophisticated instrumentation. Simultaneously, to enable on chip reagents mixing, a PDMS micromixer was developed and optimized for the highest efficiency, low pressure drop and short mixing length. The optimized device shows 80% of mixing efficiency at Re = 0.1 in 2.5 mm long mixer with the pressure drop of 6 Pa, satisfying requirements for the application in the microfluidic platform for DNA analysis.

Influence of the molecular weight in mechanical properties and degradation kinetics of chitosan inverted colloidal crystals

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Tradução e validação para Portugal do Patient Activation Measure 13 : em pessoas com Diabetes Mellitus tipo 2

RESUMO - Introdução: A Diabetes Mellitus Tipo 2 (DM2) tem uma elevada prevalência em todo o mundo, com impacto significativo a nível de Saúde Pública, na vida dos doentes e nos custos que lhe são associados. O Patiente Activation Measure 13 (PAM13) é um questionário que possibilita a avaliação das crenças, conhecimentos, motivação e capacidades de uma pessoa em relação à sua saúde; pelo que a sua utilização na DM2 é pertinente. Objetivos: Traduzir o PAM 13, versão curta, para Português de Portugal; Estabelecer as propriedades psicométricas da versão Portuguesa do PAM 13 (PAM13-P); Validar a PAM 13-P num grupo de pessoas com DM2. Material e métodos: O processo de tradução e adaptação cultural do questionário foi composto pelas fases: 1-Tradução, 2-Reconciliação e síntese, 3-Back translation, 4-Rever e sintetizar a Back translation, 5-Harmonização, 6-Revisão do comité de peritos, 7-Cognitive debriefing e 8-Avaliação final. Para validar o PAM13-P realizou-se um estudo observacional transversal analítico com uma amostra de conveniência, de pessoas com DM2, seguidas na Associação Protectora dos Diabéticos de Portugal. O questionário foi de autopreenchimento e foi consultado o processo clínico para obtenção da HbA1c. O tratamento estatístico foi realizado através do SPSS 21® e Winsteps v3.8.1®. Resultados e discussão: O processo de tradução e adaptação cultural foi realizado de acordo com as guidelines. Foram realizados 3 painéis de e-Delphi, com 21 participantes de áreas distintas, tendo-se obtido bons níveis de concordância. As principais modificações realizadas ao questionário foram a simplificação da linguagem e dos itens, obtendo-se as equivalências necessárias. O PAM13-P foi aplicado a 201 pessoas, sendo que a taxa de resposta foi de 83%. Na amostra analisada 57.3% eram homens. Obtiveram-se as médias de idade 67.1 anos e de duração de diabetes 17.3 anos. A média do score do PAM foi 58.5±10.1(41.8-90.5) pontos e 49,7% da amostra estava no nível 3 de ativação. Relativamente aos itens verificou-se que os itens mais difíceis foram o 13(56.1) e o 8(55.4) e o com menor dificuldade foi 4(38.5). As categorias de resposta tiveram um bom ajuste ao Modelo de Rasch. O ajustamento dos itens foi infit entre 0.779-1.177 e outfit entre 0.794-1.315. A fiabilidade dos indivíduos variou entre 0.77(real) e 0.83(modelo) e dos itens foi de 0.97 (real e modelo). O Alfa de Cronbach foi bom (α=0.82). Estas estatísticas foram semelhantes aos da validação do PAM13. Existiu uma relação entre o score do PAM e os itens de validação em 51%. Das variáveis analisadas, existia um relação do nível de ativação com a idade e com a HbA1c. Conclusões: O PAM13-P foi traduzido e adaptado culturalmente para Português e foi validado em pessoas com DM2, sendo as propriedades psicométricas boas.

Psychometric properties of the Psychopathy Checklist : Youth version among portuguese juvenile delinquents

The main aim of the present study was to examine some psychometric properties of the Psychopathy Checklist: Youth Version (PCL:YV) among Portuguese juvenile delinquents. With forensic sample of 192 incarcerated male participants, the Portuguese version of the PCL:YV demonstrated promising psychometric properties of the three-factor model of youth psychopathy, internal consistency, convergent validity, concurrent validity, and retrospective validity that generally justify its use among Portuguese youths. Statistically significant associations were found with age of criminal onset, frequency of crimes, number of victims, and use of physical violence.

Inventário de Medos III : Avaliação das qualidades psicométricas em uma amostra portuguesa

Este estudo teve como objetivo avaliar as qualidades psicométricas do Fear Survey Schedule-III, em uma amostra portuguesa. Participaram 1.980 sujeitos selecionados por conveniência a partir de uma população adulta normativa. As idades dos participantes estavam compreendidas entre os 18 e os 80 anos (M = 39,5, DP = 8,5), sendo 59% do sexo feminino. As qualidades psicométricas da escala foram avaliadas em suas facetas de sensibilidade psicométrica, validade de construto e confi abilidade. A validade externa de construto foi avaliada com análise multigrupos em amostra aleatória e independente da amostra de validação inicial. O modelo fatorial original proposto apresentou um ajustamento inaceitável à amostra de validação. Procedeu-se ao refi namento do modelo de medida em uma parte da amostra, selecionada aleatoriamente. Em conclusão, o modelo de medida simplifi cado apresentou uma boa qualidade de ajustamento fatorial e foi invariante em uma segunda amostra independente da primeira. Propôs-se uma nova estrutura hierárquica, com fator de 2ª ordem designado por “Medos”, que revelou boas qualidades psicométricas (sensibilidade, validade de construto e confi abilidade).

Magnetotransport properties of metal/LaAlO3/SrTiO3 heterostructures

The quasi two-dimensional electron gas (q2DEG) hosted in the interface of an epitaxially grown lanthanum aluminate (LaAlO3) thin film with a TiO2-termi-nated strontium titanate (SrTiO3) substrate (001) has been massively studied in the last few years. The confinement of mobile electrons to within a few nanome-ters from the interface, superconductive behavior at low temperatures and elec-tron mobility exceeding 1000 cm2/(V.s) make this system an interesting candi-date to explore the physics of spin injection and transport. However, due to the critical thickness for conduction of 4 unit cells (uc) of LaAlO3, a high tunneling resistance hampers electrical access to the q2DEG, preventing proper injection of spin polarized current. Recently, our group found that depositing a thin overlayer of Co on LaAlO3 reduces the critical thickness, enabling conduction with only 1 uc of LaAlO3. Two scenarios arise to explain this phenomenon: a pinning of the Fermi level in the metal, inducing charge transfer in the SrTiO3; the creation of oxygen vacancies at the interface between LaAlO3 and the metal, leading to an n-type doping of the SrTiO3. In this dissertation, we will report on magnetotransport of metal/LaAlO3/SrTiO3 (metal: Ti, Ta, Co, Py, Au, Pt, Pd) heterostructures with 2 uc of LaAlO3 studied at low temperatures (2 K) and high magnetic fields (9 T). We have analyzed the transport properties of the gas, namely, the carrier concen-tration, mobility and magnetotransport regime and we will discuss the results in the light of the two scenarios mentioned above.

Evaluation of efficacy, reliability, and tolerability of sibutramine in obese patients, with an echocardiographic study

This is a double-blind, placebo-controlled study of the efficacy, safety, and tolerability of sibutramine in the management of obese patients for a 6-month period. METHOD: Sixty-one obese patients (BMI >30, <40 kg/m2), aged 18-65 years were evaluated. In the first phase of the study (30 days), the patients were given a placebo. We monitored compliance with a low-calorie diet (1200 kcal/day) and to the placebo. In the next stage, the double-blind phase (6 months), we compared placebo and sibutramine (10 mg/day). The criteria for evaluating efficacy were weight loss, reduction in body mass index (BMI), and abdominal and hip circumferences. Tolerability was assessed based on reported side effects, variation in arterial blood pressure and heart rate, metabolic profile (fasting glucose, total cholesterol and its fractions, and triglycerides), laboratory tests (renal and hepatic functions), and flow Doppler echocardiogram. RESULTS: We observed a greater weight loss (7.3 kg, 8% vs 2.6 kg, 2.8%) and a reduction in body mass index (7.4% vs 2.1%) in the sibutramine group than in the placebo group. Classifying the patients into 4 subgroups according to weight loss (weight gain, loss <5%, loss of 5% to 9.9%, and loss >10%), we observed a weight loss of >5% in 40% of the patients on sibutramine compared with 12.9% in the placebo group. We also detected weight gain in 45.2% of the placebo group compared to 20% in the sibutramine group. The sibutramine group showed improvement in HDL- cholesterol values (increased by 17%) and triglyceride values (decreased by 12.8%). This group also showed an increase in systolic blood pressure (6.7%, 5 mmHg). There were no changes in echocardiograms comparing the beginning and end of follow-up, and side effects did not lead to discontinuation of treatment. DISCUSSION: Sibutramine proved to be effective for weight loss providing an 8% loss of the initial weight. Compliance to prolonged treatment was good, and side effects did not result in discontinuation of treatment. These data confirmed the good efficacy, tolerability, and safety profiles of sibutramine for treatment of obesity.

Soil physical and Chemical properties of cultivated pasture on forest land, Roraima, Brazil .

Soil conditions under pasture were examined in a range of sites representing the sequence of conversion of forest to pasture at two locations in the vicinity of Ilha de Maracã, Roraima. Comparisons were made with adjacent savana. Soil bulk densities shown to increase after forest clearance and soil chemical data indicate that the initial beneficial effects on nutrient supply of burning forest debris are rather short-lived. Very low levels of available phosphorus prevail in areas of savanna and cultivated pasture of all ages. Variations in the status of older cultivated pastures are mainly attributable to different grazing levelt.

Continuous monitoring of concrete mechanical properties since an early age to support construction phasing

The assessment of concrete mechanical properties during construction of concrete structures is of paramount importance for many intrinsic operations. However many of the available non-destructive methods for mechanical properties have limitations for use in construction sites. One of such methodologies is EMM-ARM, which is a variant of classic resonant frequency methods. This paper aims to demonstrate the efforts towards in-situ applicability of EMMARM, as to provide real-time information about concrete mechanical properties such as E-modulus and compressive strength. To achieve the aforementioned objective, a set of adaptations to the method have been successfully implemented and tested: (i) the reduction of the beam span; (ii) the use of a different mould material and (iii) a new support system for the beams. Based on these adaptations, a reusable mould was designed to enable easier systematic use of EMMARM. A pilot test was successfully performed under in-situ conditions during a bridge construction.

Innovative method for the continuous monitoring of concrete viscoelastic properties since early ages: concept and pilot experiments

The experimental evaluation of viscoelastic properties of concrete is traditionally made upon creep tests that consist in the application of sustained loads either in compression or in tension. This kind of testing demands for specially devised rigs and requires careful monitoring of the evolution of strains, whereas assuring proper load constancy. The characterization of creep behaviour at early ages offers additional challenges due to the strong variations in viscoelastic behaviour of concrete during such stages, demanding for several testing ages to be assessed. The present research work aims to assist in reducing efforts for continuous assessment of viscoelastic properties of concrete at early ages, by application of a dynamic testing technique inspired in methodologies used in polymer science: Dynamic Mechanical Analyses. This paper briefly explains the principles of the proposed methodology and exhibits the first results obtained in a pilot application. The results are promising enough to encourage further developments.