AFLP-based genetic linkage maps of the Pacific oyster Crassostrea gigas Thunberg

Amplified fragment length polymorphisms (AFLPs) were used for genome mapping in the Pacific Oyster Crassostrea gigas Thunberg. Seventeen selected primer combinations produced 1106 peaks, of which 384 (34.7%) were polymorphic in a backcross family. Among the polymorphic markers, 349 were segregating through either the female or the male parent. Chi-square analysis indicated that 255 (73.1%) of the markers segregated in a Mendelian ratio, and 94 (26.9%) showed significant (P < 0.05) segregation distortion. Separate genetic linkage maps were constructed for the female and male parents. The female framework map consisted of 119 markers in 11 linkage groups, spanning 1030.7 cM, with an average interval of 9.5 cM per marker. The male map contained 96 markers in 10 linkage groups, covering 758.4 cM, with 8.8 cM per marker. The estimated genome length of the Pacific oyster was 1258 cM for the female and 933 cM for the male, and the observed coverage was 82.0% for the female map and 81.3% for the male map. Most distorted markers were deficient for homozygotes and closely linked to each other on the genetic map, suggesting the presence of major recessive deleterious genes in the Pacific oyster.

Genetic mapping of size-related quantitative trait loci (QTL) in the bay scallop (Argopecten irradians) using AFLP and microsatellite markers

We constructed genetic linkage maps for the bay scallop Argopecten irradians using AFLP and microsatellite markers and conducted composite interval mapping (CIM) of body-size-related traits. Three hundred seventeen AFLP and 10 microsatellite markers were used for map construction. The female parent map contained 120 markers in 15 linkage groups, spanning 479.6 cM with an average interval of 7.0 cM. The male parent map had 190 markers in 17 linkage groups, covering 883.8 cM at 7.2 cM per marker. The observed coverage was 70.4% for the female and 81.1% for the male map. Markers that were distorted toward the same direction were closely linked to each other on the genetic maps, suggesting the presence of genes important for survival. Six size-related traits, shell length, shell height, shell width, total weight, soft tissue weight, and shell weight, were measured for QTL mapping. The size data were significantly correlated with each other. We subjected the data, log transformed firstly, to a principle component analysis and use the first principle component for QTL mapping. CIM analysis revealed one significant QTL (LOD=2.69, 1000 permutation, P<0.05) in linkage group 3 on the female parent map. The mapping of size-related QTL in this study raises the possibility of improving the growth of bay scallops through marker-assisted selection. (c) 2007 Published by Elsevier B.V.

A preliminary genetic linkage map of the pacific abalone Haliotis discus hannai Ino

Preliminary genetic linkage maps were constructed for the Pacific abalone (Haliotis discus hannai Ino) using amplified fragment length polymorphism (AFLP), randomly amplified polymorphic DNA (RAPD), and microsatellite markers segregating in a F, family. Nine microsatellite loci, 41 RAPD, and 2688 AFLP markers were genotyped in the parents and 86 progeny of the mapping family. Among the 2738 markers, 384 (including 365 AFLP markers, 10 RAPD markers, and 9 microsatellite loci) were polymorphic and segregated in one or both parents: 241 in the female and 146 in the male. The majority of these markers, 232 in the female and 134 in the male, segregated according to the expected 1:1 Mendelian ratio (alpha = 0.05). Two genetic linkage maps were constructed using markers segregating in the female or the male parent. The female framework map consisted of 119 markers in 22 linkage groups, covering 1773.6 cM with an average intermarker space of 18.3 cM. The male framework map contained 94 markers in 19 linkage groups, spanning 1365.9 cM with an average intermarker space of 18.2 cM. The sex determination locus was mapped to the male map but not to the female map, suggesting a XY-male determination mechanism. Distorted markers showing excess of homozygotes were mapped in clusters, probably because of their linkage to a gene that is incompatible between two parental populations.

Corrosion behaviour of steel in beach soil along Bohai Bay

Research on corrosion of steel structures in various marine environments is essential to assure the safety of structures and can effectively prolong their service life. In order to provide data for anticorrosion design of oil exploitation structures in the Bohai Bay, the corrosion behaviour and properties of steel in beach soil, using typical steel samples (Q235A carbon steel and API 5Lx52 pipeline steel) buried 0.5, 1.0 and 1.5 m deep under typical beach soils in Tanggu, Yangjiaogou, Xingcheng, Yingkou and Chengdao for 1-2 years were studied. The carbon steel and pipeline steel were both corroded severely in the beach soil, with the form of corrosion being mainly uniform with some localised attack (pitting corrosion). The corrosion rate of the carbon steel was up to 0.16 mm/year with a maximum penetration depth of 0.76 mm and that of the pipeline steel was up to 0.14 mm/year, with a maximum penetration depth of 0.53 mm. Compared with carbon steel, the pipeline steel generally had better corrosion resistance in most test beach soils. The corrosion rates and the maximum corrosion depths of carbon steel and pipeline steel were in the order: Tanggu>Xingcheng>Chengdao>Yingkou>Yangjiaogou with corrosion altering with depth of burial. The corrosion of steel in the beach soil involves a mixed mechanism with different degrees of soil aeration and microbial activity present. It is concluded that long term in situ plate laying experiments must be carried out to obtain data on steel corrosion in this beach soil environment so that the effective protection measures can be implemented.

Corrosion of mild steel in different granularity seabed sediment saturated with seawater

In order to investigate the corrosion of pipeline materials in Seabed Sediment (SBS) environment, weight-loss and electrochemical measurements in saturated sand and mud cells with seawater were performed for a simulation. The used electrochemical measurements included linear polarization resistance (LPR) and potentiodynamic scanning measurement. It was showed that the corrosion rate of mild steel in the present condition was lower than the corrosion rate of other marine environment corrosion zones of it; that the granularity of SBS could affect the corrosion behavior greatly; that with increasing grain size of SBS, the corrosion rate increased. Integrated over the results of the weight loss and polarization curves, the oxygen diffusion (oxygen as a depolarizant agent) mechanism was proposed and discussed.

Seasonal changes in weight and body composition of yak grazing on alpine-meadow grassland in the Qinghai-Tibetan plateau of China

Forty-five male yaks (born April 2001) were studied to determine how seasonal changes on the Qinghai-Tibetan plateau affected BW and body composition. Thirty yaks were weighed monthly from birth to 26 mo of age to determine seasonal changes in BW. The remaining 15 yaks were allocated randomly to five groups (three yaks per group), designated for slaughter at 13, 15, 18, 22, and 25 mo to measure seasonal effects on body chemical composition. All yaks were grazed on the alpine-meadow grassland of the plateau without any supplementation. All BW and body composition data were calculated on an individual basis. Body weight and body composition data were both compared across seven growth periods spanning 2 yr and defined by season. From April (birth) to December 2001 of the first growing season, yak BW increased (P < 0.01); however, during the subsequent cold season (December 2001 to May 2002), BW decreased (P < 0.01). The second growing season ran from May 2002 (13 mo of age) to October 2002 (18 mo of age), and the second live weight-loss season ran from October 2002 until May 2003. The weight loss experienced by yaks during the first weight loss season was 25.64% of the total weight gain in the first growing season. The weight loss experienced by yaks during the second weight-loss season was 29.73% of the total weight gain in the second growing season. Energy retention in the second growing season was 291.07 MJ, 50.8% of which was consumed during the subsequent cold season. Energy accumulation in the summer (from May to July) and fall (from July to October) of the second growing season did not differ (5.01 and 6.30 MJ/kg of EBW gain, respectively; P = 0.63). The energy mobilized during the second winter (from October 2002 to February 2003) was 16.49 MJ/kg of EBW, and in the second spring (from February to May 2003), it was 9.06 MJ/kg of EBW. These data suggest that the decrease in grazing yak BW during the first cold season is much less than during the second cold season, and that the energy content per unit of BW mobilized is greater (P = 0.02) in winter than in spring. Results from this study demonstrate highly efficient compensatory growth in grazing yaks following the first weight loss period during the first cold season. This benefit could be exploited by herders to improve yak production. Yaks may have developed a type of self-protection mechanism to overcome the long cold seasons in the Qinghai-Tibetan plateau.

Uniformity of karyotypes in Ligularia (Asteraceae : Senecioneae), a highly diversified genus of the eastern Qinghai-Tibet Plateau highlands and adjacent areas

Ligularia, a highly diversified genus in the eastern Qinghai-Tibet Plateau and adjacent areas, was chosen as a suitable subject in which to study speciation patterns in this 'hot spot' area at the chromosomal level. Chromosome numbers and karyotypes were studied in 23 populations of 14 species, most of which are endemic to this area. The basic number x = 29 was confirmed for all species. Ligularia virgaurea was found to have diploid and triploid cytotypes, 2n = 58 and 87. Other species are only diploid, with 2n = 58. The karyotypes of all populations within any species, and all species spanning most sections and covering most of the morphological range in Ligularia, are very similar to each other, belonging to type 2A according to Stebbin's classification. This karyotype was also found in its close allies, e.g. Cremanthodium, Ligulariopsis, Parasenecio, and Sinacalia. Aneuploid reduction of chromosome number from 2n = 60 to 58 and karyotypic variation was found in Ligularia and its allies. Such a chromosomal pattern with few polyploids infers that variation of karyotype structure at the diploid level seems to be the predominant feature of chromosomal evolution in this group and sympatric speciation via hybridization and polyploidization has played a minor role in its species diversity. (C) 2004 The Linnean Society of London

基于工业无线网络WIA技术的管道泄漏监测系统

在分析现有的管道泄漏监测技术的基础上,提出了一个基于工业无线网络WIA技术的管道泄漏监测系统方案,详细介绍了该方案的系统运行原理、系统结构及系统性能及特点。

AUV自动跟踪水下管道的试验研究

本文介绍了ＡＵＶ 跟踪水下管道的一种方法，讨论了几种跟踪方式的优、缺点，给出了控制系统原理图和试验结果

管线钢硫化物应力腐蚀裂开危险性智能探测仪的研究

介绍了管线钢硫化物应力腐蚀裂开危险性智能探测仪的设计、结构和检测结果。该检测仪具有数据采集、存储处理、逻辑判断和现场制表打印输出评价/判断等功能,对及时发现和消除含硫油气管线的隐患,以防止恶性破坏事故的发生有重要意义。

基于FPGA高速并行FFT处理器设计与实现

在研究快速傅里叶变换(FFT)算法的基础上,根据FPGA性能高、灵活性强、速度快的特点,提出了高效的基4-FFT处理器的实现方法。数据存储采用分块存储的方法,大大提高了存取速度。数据寻址采用新型的地址产生方法,可并行产生所需数据地址。同时,在蝶形单元的设计中很好的将并行运算技术和流水线技术相结合了起来,又进一步提高了运算速度。测试结果表明,时钟在50MHz时完成1024点FFT的时间为25.6μs,满足了应用实时性的要求。

中国黄土高原洛川剖面 630 kyr 以来的孢粉记录

It is known that global climate changed from the early Tertiary “Green House” to the Quaternary “Ice House” of cyclic glacial-interglacial climatic changes. Since the middle Pleistocene, the climate cycles changed from 40 kyr to 100 kyr, and the amplitudes of climatic fluctuations increased significantly. Therefore, it is important to study the climate changes since the middle Pleistocene. The loess-paleosol sequence in China is considered as one of the most continuous continental records of the last 2.58 Ma. Paleoclimatic and environmental changes have been widely extracted through various climatic parameters. However, the history of paleovegetation on the Loess Plateau still remains unclear. Did an extensive broadleaf forest ever exist on the Loess Plateau? Pollen preserved in the loess and paleosol provides a direct record for vegetation and paleoenvironmental change on the Plateau. However, because it is difficult to extract sufficient pollen grains from loess, the pollen record since the middle Pleistocene especially in the central part of the Chinese Loess Plateau has not been well studied. So we preliminarily focus on the palynological records of the loess-paleosol sequence spanning the last 630 kyr at Luochuan and aim to understand the evolution of vegetation and climate change on the Chinese Loess Plateau. The main results and conclusions are as follows: 1. The palynological results show that the grassland has been a dominant vegetation in the Luochuan area since 630 kyr, even during the intervals of relatively warm and wet climatic conditions. 2. The pollen concentration of Luochuan section sharply decreases from the bottom of S1 to downward depth. This decrease can be attributed to depositional environment rather than climate change. In loess, not only oxidation, but also the PH of deposits and bacteria or fungi have been able to degrade sporopollenin. 3. The paleoclimatic condition during S4 stage, characterized with warmer condition during the early stage, was warmer and wetter than that during S5 in Luochuan area. Paleoclimate was warmer and wetter during the early stage of S5 and became colder and drier later. The special pedogenic features of S5-I can be attributed to a prolonged pedogenic duration rather than a warm-wet climate. 4. Evidence from pollen assemblage suggests that the Holocene vegetation has been affected by human impacts, especially after the Yangshao Culture. 5. The present steppe environment on the loess plateau is mainly due to natural conditions. Temperature, seasonal precipitation and soil structure are three important factors which control the vegetation type. 6. The vegetation on the loess plateau is characterized with zonal or azonal distribution. So local conditions should be taken into account when recover natural vegetation. Finally, the restoration and reconstruction of ecosystem on the loess plateau area should be focused on planting grassland rather than forests.

甘肃临夏盆地龙担剖面晚新生代磁性地层与古环境

Linxia Basin, situated in the northeast belt of the Tibetan Plateau, is a late Cenozoic depression basin bounded by the Tibetan Plateau and the Chinese Loess Plateau. The Cenozoic deposition, spanning over 30Ma, in which very abundant mammal fossils were discovered, is very suitable for study of uplift processes and geo-morphological evolution of the Tibetan Plateau. The Longdan section (35°31′31.6″N，103°29′0.6″E) is famous for the middle Miocene Platybelodon fauna and the late Miocene Hipparion fauna for a long time and is also one of the earliest known places for wooly rhino, which lies on the east slope of Longdan, a small village of township Nalesi in the south of the Dongxiang Autonomous County, Linxia Hui Nationallity Autonomous Prefecture. The Longdan mammal fauna was discovered at the base of the Early Pleistocene loess deposits at Dongxiang, where the lithology is different from the typical Wucheng Loess on the Chinese Loess Plateau. The rich fossils contain many new species and the major two layers of fossils are in the loess beds. Geologically the fossiliferous area is located in the central part of the Linxia Cenozoic sedimentary basin. Tectonically the Linxia Basin is an intermountain fault basin, bordered by the Leijishan major fault in the south and the north Qinling and Qilianshan major faults in the north. The section is 51.6m thick above the gravel layer, including the 1.6m Late Pleistocene Malan Loess on the top and the other loess-paleosol sequences in the middle of the section. The base of the section is the Jishi Formation, consisting of gravel layer of 13 ~ 17m thick. In this study, 972 bulk samples were collected with an interval of 5cm and other 401 orientied samples were taken with a magnetic compass. In the laboratory, the paleomagnetism, medium grain size, susceptibility, color, micromorphology, anisotropy of magnetic susceptibility were analyzed. From the stratigraphic analysis, the Longdan section from the top 0.3m to the bottom 51.6m, containing 5 normal polarities (N1-N5) and 5 reversal polarities (R1-R5). The paleomagnetic results show N3 is the Olduvai subchron in the middle of the Matuyama chron, and then the chronology of the Longdan mammal fauna is constructed along the section. The Matuyama-Gauss boundary is 45m and N5 enters Gauss chron. The Olduvai subchron with the age of 1.77 ~ 1.95Ma is found just in the upper fossiliferous level of Longdan mammal fauna. Taking the deposit rate of the section into account, the geological age of the upper fossiliferous level of Longdan mammal fauna is estimated to be about 1.9Ma. The lower fossiliferous level is just below the Reunion subchron and its age is estimated to be 2.25Ma. In addition, anisotropy of magnetic susceptibility of the loess-paleosol and other climatic indexes were used for discussing the late Cenozoic paleoenvironmental changes at Longdan, from which the Longdan area should have been an area of predominantly steppe the same as the Longdan mammal fauna.

中国大中型气田天然气成藏物理化学模拟研究

Natural gas pays more important role in the society as clean fuel. Natural gas exploration has been enhanced in recent years in many countries. It also has prospective future in our country through "85" and "95" national research. Many big size gas fields have been discovered in different formations in different basins such as lower and upper Paleozoic in Erdos basin, Tertiary system in Kuche depression in Tarim basin, Triassic system in east of Sichuan basin. Because gas bearing basins had been experienced multiple tectogenesis. The characteristics of natural gases usually in one gas field are that they have multiple source rocks and are multiple maturities and formed in different ages. There has most difficult to research on the gas-rock correlation and mechanism of gas formation. Develop advanced techniques and methods and apply them to solve above problems is necessary. The research is focused on the critical techniques of geochemistry and physical simulation of gas-rock correlation and gas formation. The lists in the following are conclusions through research and lots of experiments. I 8 advanced techniques have been developed or improved about gas-rock correlation and gas migration, accumulation and formation. A series of geochemistry techniques has been developed about analyzing inclusion enclave. They are analyzing gas and liquid composition and biomarker and on-line individual carbon isotope composition in inclusion enclave. These techniques combing the inclusion homogeneous temperature can be applied to study on gas-rock correlation directly and gas migration, filling and formation ages. Technique of on-line determination individual gas carbon isotope composition in kerogen and bitumen thermal pyrolysis is developed. It is applied to determine the source of natural is kerogen thermal degradation or oil pyrolysis. Method of on-line determination individual gas carbon isotope composition in rock thermal simulation has being improved. Based on the "95"former research, on-line determination individual gas carbon isotope composition in different type of maceral and rocks thermal pyrolys is has been determined. The conclusion is that carbon isotope composition of benzene and toluene in homogenous texture kerogen thermal degradation is almost same at different maturity. By comparison, that in mixture type kerogen thermal pyrolysis jumps from step to step with the changes of maturity. This conclusion is a good proof of gas-rock dynamic correlation. 3. Biomarker of rock can be determined directly through research. It solves the problems such as long period preparing sample, light composition losing and sample contamination etc. It can be applied to research the character of source rock and mechanism of source rock expulsion and the path of hydrocarbon migration etc. 4. The process of hydrocarbon dynamic generation in source rock can be seen at every stage applying locating observation and thermal simulation of ESEM. The mechanism of hydrocarbon generation and expulsion in source rock is discussed according to the experiments. This technique is advanced in the world. 5. A sample injection system whose character is higher vacuum, lower leaks and lower blank has been built up to analyze inert gas. He,Ar,Kr and Xe can be determined continuously on one instrument and one injection. This is advanced in domestic. 7. Quality and quantity analysis of benzene ring compounds and phenolic compounds and determination of organic acid and aqueous gas analysis are applied to research the relationship between compounds in formation water and gas formation. This is another new idea to study the gas-rock correlation and gas formation. 8. Inclusion analysis data can be used to calculate the Paleo-fluid density, Paleo-geothermal gradient and Paleo-geopressure gradient and then to calculate the Paleo-fluid potential. It's also a new method to research the direction of hydrocarbon migration and accumulation. 9. Equipment of natural gas formation simulation is produced during the research to probe how the physical properties of rock affect the gas migration and accumulation and what efficiency of gas migrate and factors of gas formation and the models of different type of migration are. II study is focused on that if the source rocks of lower Paleozoic generated hydrocarbon and what the source rocks of weathered formation gas pool and the mechanism of gas formation are though many advanced techniques application. There are four conclusions. 1.The maturity of Majiagou formation source rocks is higher in south than that in north. There also have parts of the higher maturity in middle and east. Anomalous thermal pays important role in big size field formation in middle of basin. 2. The amount of gas generation in high-over maturity source rocks in lower Paleozoic is lager than that of most absorption of source rocks. Lower Paleozoic source rocks are effective source rocks. Universal bitumen exists in Ordovician source rocks to prove that Ordovician source rocks had generated hydrocarbon. Bitumen has some attribution to the middle gas pool formation. 3. Comprehensive gas-rock correlation says that natural gases of north, west, south of middle gas field of basin mainly come from lower Paleozoic source rocks. The attribution ratio of lower Paleozoic source rocks is 60%-70%. Natural gases of other areas mainly come from upper Paleozoic. The attribution ratio of upper Paleozoic source rocks is 70%. 4. Paleozoic gases migration phase of Erdos basin are also interesting. The relative abundance of gasoline aromatic is quite low especially toluene that of which is divided by that of methyl-cyclohexane is less than 0.2 in upper Paleozoic gas pool. The migration phase of upper Paleozoic gas may be aqueous phase. By comparison, the relative abundance of gasoline aromatic is higher in lower Paleozoic gas. The distribution character of gasoline gas is similar with that in source rock thermal simulation. The migration phase of it may be free phase. IH Comprehensive gas-rock correlation is also processed in Kuche depression Tarim basin. The mechanism of gas formation is probed and the gas formation model has been built up. Four conclusions list below. 1. Gases in Kuche depression come from Triassic-Jurassic coal-measure source rocks. They are high-over maturity. Comparatively, the highest maturity area is Kelasu, next is Dabei area, Yinan area. 2. Kerogen thermal degradation is main reason of the dry gas in Kuche depression. Small part of dry gas comes from oil pyrolysis. VI 3.The K12 natural gas lays out some of hydro-gas character. Oil dissolved in the gas. Hydro-gas is also a factor making the gas drier and carbon isotope composition heavier. 4. The mechanism and genesis of KL2 gas pool list as below. Overpressure has being existed in Triassic-Jurassic source rocks since Keche period. Natural gases were expulsed by episode style from overpressure source rocks. Hetero-face was main migration style of gas, oil and water at that time. The fluids transferred the pressure of source rocks when they migrated and then separated when they got in reservoir. After that, natural gas migrated up and accumulated and formed with the techno-genesis. Tectonic extrusion made the natural gas overpressure continuously. When the pressure was up to the critical pressure, the C6-C7 composition in natural gas changed. The results were that relative abundance of alkane and aromatic decreased while cycloalkane and isoparaffin increased. There was lots of natural gas filling during every tectonic. The main factors of overpressure of natural gas were tectonic extrusion and fluid transferring pressure of source rocks. Well preservation was also important in the KL2 gas pool formation. The reserves of gas can satisfy the need of pipeline where is from west to east. IV A good idea of natural gas migration and accumulation modeling whose apparent character is real core and formation condition is suggested to model the physical process of gas formation. Following is the modeling results. 1. Modeling results prove that the gas accumulation rule under cap layer and gas fraction on migration path. 2. Natural gas migration as free phase is difficult in dense rock. 3. Natural gases accumulated easily in good physical properties reservoirs where are under the plugging layer. Under the condition of that permeability of rock is more than 1 * 10~(-3)μm~(-1), the more better the physical properties and the more bigger pore of rock, the more easier the gas accumulation in there. On the contrary, natural gas canonly migrate further to accumulate in good physical properties of rock. 4. Natural gas migrate up is different from that down. Under the same situation, the amount of gas migration up is lager than that of gas migration down and the distance of migration up is 3 times as that of migration down. 5. After gas leaks from dense confining layer, the ability of its dynamic plug-back decreased apparently. Gas lost from these arils easily. These confining layer can confine again only after geology condition changes. 6. Water-wetted and capillary-blocking rocks can't block water but gases generally. The result is that water can migrate continuously through blocking rocks but the gases stay under the blocking rocks then form in there. The experiments have proved the formation model of deep basin gas.

克拉2异常高压气藏地质特征及开发技术研究

Kela-2 gas field in Tarim Basin is the main supply source for West-to-East Pipeline project, also the largest abnormally-pressured gas field discovered in China currently. The geological characterization, fine geological modeling and field development plan are all the world-class difficult problems. This work includes an integrated geological and gas reservoir engineering study using advanced technology and approaches, the scientific development plan of Kela-2 gas field as well as the optimizations of the drilling, production and surface schemes. Then, it's expected that the Kela-2 gas field can be developed high-efficiently.Kuche depression is one part of the thrust belt of the South Tianshan Mountains, Kela-2 field is located at the Kelasu structural zone in the north of Kuche depression. The field territory is heavily rugged with deeply cut gullies, complex geological underground structure, variable rock types, thrust structure development. Therefore, considerable efforts have been made to develop an integrated technique to acquire, process and interpret the seismic data in complicated mountain region. Consequently a set of seismic-related techniques in the complicated mountain region has been developed and successfully utilized to interpret the structure of Kela-2 gas field.The main reservoir depositional system of Kela 2 gas field is a platform - fan delta - braided river system. The reservoir rocks are medium-fine and extremely fine grained sandstones with high structure maturity and low composition maturity. The pore system structure is featured by medium-small pore, medium-fine throat and medium-low assortment. The reservoir of Kela-2 gas field is characteristic of medium porosity and medium permeability. The pay zone is very thick and its lateral distribution is stable with a good connection of sand body. The overpressure is caused mainly by the strongly tectonic squash activities, and other factors including the later rapid raise and compartment of the high-pressure fluid, the injection of high-pressure fluid into the reservoir.Based on the deliverability tests available, the average binomial deliverability equation is provided applicable for the overall field. The experimental results of rock stress-sensitive tests are employed to analyze the change trend of petrophysical properties against net confining stress, and establish the stress-based average deliverability equation. The results demonstrate the effect of rock deformation on the deliverability is limited to less than 5% in the early period of Kela-2 gas field, indicating the insignificant effect on deliverability of rock deformation.In terms of the well pattern comparisons and development planning optimizations, it is recommended that the producers should be located almost linearly along the structural axis. A total of 9 producers have a stable gas supply volume of 10.76 BCMPY for 17 years. For Kela-2 gas field the total construction investment is estimated at ￥7,697,690,000 RMB with the internal earning rate of 25.02% after taxation, the net present value of ￥7,420,160,000 RMB and the payback period of 5.66 years. The high profits of this field development project are much satisfactory.