An alternative methodology in Schottky diode physics

The fabrication and electrical characterization of Schottky junction diodes have been extensively researched for three-quarters of a century since the original work of Schottky in 1938. This study breaks from the highly standardized regime of such research and provides an alternative methodology that prompts novel, more efficient applications of the adroit Schottky junction in areas such as chemical and thermal sensing. The core departure from standard Schottky diode configuration is that the metal electrode is of comparable or higher resistance than the underlying semiconductor. Further, complete electrical characterization is accomplished through recording four-probe resistance-temperature (R-D-T) characteristics of the device, where electrical sourcing and sensing is done only via the metal electrode and not directly through the semiconductor. Importantly, this results in probing a nominally unbiased junction while eliminating the need for an Ohmic contact to the semiconductor. The characteristic R-D-T plot shows two distinct regions of high (metal) and low (semiconductor) resistances at low and high temperatures, respectively, connected by a crossover region of width, DT, within which there is a large negative temperature coefficient of resistance. The R-D-T characteristic is highly sensitive to the Schottky barrier height; consequently, at a fixed temperature, R-D responds appreciably to small changes in barrier height such as that induced by absorption of a chemical species (e.g., H-2) at the interface. A theoretical model is developed to simulate the R-D-T data and applied to Pd/p-Si and Pt/p-Si Schottky diodes with a range of metal electrode resistance. The analysis gives near-perfect fits to the experimental R-D-T characteristics, yielding the junction properties as fit parameters. The modelling not only helps elucidate the underlying physics but also helps to comprehend the parameter space essential for the discussed applications. Although the primary regime of application is limited to a relatively narrow range (DT) for a given type of diode, the alternative methodology is of universal applicability to all metal-semiconductor combinations forming Schottky contacts. (C) 2015 AIP Publishing LLC.

The TARANIS laser : A multi-terawatt system for laser plasma physics

The Terawatt Apparatus for Relativistic And Non-linear Interdisciplinary Science (TARANIS), installed in the Centre for Plasma Physics at the Queen's University Belfast, supports a wide ranging science program, including laser-driven particle acceleration, X-ray lasers and high energy density physics experiments. We present (1) an overview of the laser facility, (2) results of preliminary investigations on proton acceleration, laser action at 13.9 nm and Kα sources and (3) speculation on future experiments using these extreme sources.

The application of atomic physics within impurity diagnostics for fusion plasmas

With the focus of ITER on the transport and emission properties of tungsten, generating atomic data for complex species has received much interest. Focusing on impurity influx diagnostics, we discuss recent work on heavy species. Perturbative approaches do not work well for near neutral systems so non-perturbative data are required, presenting a particular challenge for these influx diagnostics. Recent results on Mo+ are given as an illustration of how the diagnostic applications can guide the theoretical calculations for such systems.

Laser Driven Nuclear Physics at ELI–NP

High power lasers have proven being capable to produce high energy γ-rays, charged particles and neutrons, and to induce all kinds of nuclear reactions. At ELI, the studies with high power lasers will enter for the first time into new domains of power and intensities: 10 PW and 10^23 W/cm^2. While the development of laser based radiation sources is the main focus at the ELI-Beamlines pillar of ELI, at ELI-NP the studies that will benefit from High Power Laser System pulses will focus on Laser Driven Nuclear Physics (this TDR, acronym LDNP, associated to the E1 experimental area), High Field Physics and QED (associated to the E6 area) and fundamental research opened by the unique combination of the two 10 PW laser pulses with a gamma beam provided by the Gamma Beam System (associated to E7 area). The scientific case of the LDNP TDR encompasses studies of laser induced nuclear reactions, aiming for a better understanding of nuclear properties, of nuclear reaction rates in laser-plasmas, as well as on the development of radiation source characterization methods based on nuclear techniques. As an example of proposed studies: the promise of achieving solid-state density bunches of (very) heavy ions accelerated to about 10 MeV/nucleon through the RPA mechanism will be exploited to produce highly astrophysical relevant neutron rich nuclei around the N~126 waiting point, using the sequential fission-fusion scheme, complementary to any other existing or planned method of producing radioactive nuclei.

The studies will be implemented predominantly in the E1 area of ELI-NP. However, many of them can be, in a first stage, performed in the E5 and/or E4 areas, where higher repetition laser pulses are available, while the harsh X-ray and electromagnetic pulse (EMP) environments are less damaging compared to E1.

A number of options are discussed through the document, having an important impact on the budget and needed resources. Depending on the TDR review and subsequent project decisions, they may be taken into account for space reservation, while their detailed design and implementation will be postponed.

The present TDR is the result of contributions from several institutions engaged in nuclear physics and high power laser research. A significant part of the proposed equipment can be designed, and afterwards can be built, only in close collaboration with (or subcontracting to) some of these institutions. A Memorandum of Understanding (MOU) is currently under preparation with each of these key partners as well as with others that are interested to participate in the design or in the future experimental program.

Radiological protection and nuclear engineering studies in multi-MW target systems

Tese de doutoramento, Física, Universidade de Lisboa, Faculdade de Ciências, 2014

A Crisis in Physics Education: Games to the Rescue!

An education in Physics develops both strong cognitive and practical skills. These are well-matched to the needs of employers, from engineering to banking. Physics provides the foundation for all engineering and scientific disciplines including computing technologies, aerospace, communication, and also biosciences and medicine. In academe, Physics addresses fundamental questions about the universe, the nature of reality, and of the complex socio-economic systems comprising our daily lives. Yet today, there are emerging concerns about Physics education: Secondary school interest in Physics is falling, as is the number of Physics school teachers. There is clearly a crisis in physics education; recent research has identified principal factors. Starting from a review of these factors, and from recommendations of professional bodies, this paper proposes a novel solution – the use of Computer Games to teach physics to school children, to university undergraduates and to teacher-trainees.

The interconnection of somatic and mental issues within a multidisciplinary adolescent health unit. [L'intrication des problématiques somatiques et psychiques dans une unité multidisciplinaire de santé des adolescents.]

Les aspects physiques et psychiques sont étroitement intriqués à l'adolescence, et le corps représente un lieu privilégié d'expression des conflits. C'est dire l'importance de donner une place de choix au versant psychologique au sein d'une consultation de santé des adolescents, pour tenter de discerner la souffrance psychique souvent cachée derrière la plainte somatique.

Functional multidisciplinary rehabilitation versus outpatient physiotherapy for non specific low back pain: randomized controlled trial.

INTRODUCTION: In recent decades the treatment of non-specific low back pain has turned to active modalities, some of which were based on cognitive-behavioural principles. Non-randomised studies clearly favour functional multidisciplinary rehabilitation over outpatient physiotherapy. However, systematic reviews and meta-analysis provide contradictory evidence regarding the effects on return to work and functional status. The aim of the present randomised study was to compare long-term functional and work status after 3-week functional multidisciplinary rehabilitation or 18 supervised outpatient physiotherapy sessions. METHODS: 109 patients with non-specific low back pain were randomised to either a 3-week functional multidisciplinary rehabilitation programme, including physical and ergonomic training, psychological pain management, back school and information, or 18 sessions of active outpatient physiotherapy over 9 weeks. Primary outcomes were functional disability (Oswestry) and work status. Secondary outcomes were lifting capacity (Spinal Function Sort and PILE test), lumbar range-of-motion (modified-modified Schöber and fingertip-to-floor tests), trunk muscle endurance (Shirado and Biering-Sörensen tests) and aerobic capacity (modified Bruce test). RESULTS: Oswestry disability index was improved to a significantly greater extent after functional multidisciplinary rehabilitation compared to outpatient physiotherapy at follow-up of 9 weeks (P = 0.012), 9 months (P = 0.023) and 12 months (P = 0.011). Work status was significantly improved after functional multidisciplinary rehabilitation only (P = 0.012), resulting in a significant difference compared to outpatient physiotherapy at 12 months' follow-up (P = 0.012). Secondary outcome results were more contrasted. CONCLUSIONS: Functional multidisciplinary rehabilitation was better than outpatient physiotherapy in improving functional and work status. From an economic point of view, these results should be backed up by a cost-effectiveness study.

Molecular autopsy in sudden cardiac death and its implication for families: discussion of the practical, legal and ethical aspects of the multidisciplinary collaboration.

Sudden cardiac death (SCD) is a major cause of premature death in young adults and children in developed countries. Standard forensic autopsy procedures are often unsuccessful in determining the cause of SCD. Post-mortem genetic testing, also called molecular autopsy, has revealed that a non-negligible number of these deaths are a result of inherited cardiac diseases, including arrhythmic disorders such as congenital long QT syndrome and Brugada syndrome. Due to the heritability of these diseases, the potential implications for living relatives must be taken into consideration. Advanced diagnostic analyses, genetic counselling, and interdisciplinary collaboration should be integral parts of clinical and forensic practice. In this article we present a multidisciplinary collaboration established in Lausanne, with the goal of properly informing families of these pathologies and their implications for surviving family members. In Switzerland, as in many other countries, legal guidelines for genetic testing do not address the use of molecular tools for post-mortem genetic analyses in forensic practice. In this article we present the standard practice guidelines established by our multidisciplinary team.

Sudden cardiac death in forensic medicine - Swiss recommendations for a multidisciplinary approach.

Sudden cardiac death (SCD) is by definition unexpected and cardiac in nature. The investigation is almost invariably performed by a forensic pathologist. Under these circumstances the role of the forensic pathologist is twofold: (1.) to determine rapidly and efficiently the cause and manner of death and (2.) to initiate a multidisciplinary process in order to prevent further deaths in existing family members. If the death is determined to be due to "natural" causes the district attorney in charge often refuses further examinations. However, additional examinations, i.e. extensive histopathological investigations and/or molecular genetic analyses, are necessary in many cases to clarify the cause of death. The Swiss Society of Legal Medicine created a multidisciplinary working group together with clinical and molecular geneticists and cardiologists in the hope of harmonising the approach to investigate SCD. The aim of this paper is to close the gap between the Swiss recommendations for routine forensic post-mortem cardiac examination and clinical recommendations for genetic testing of inherited cardiac diseases; this is in order to optimise the diagnostic procedures and preventive measures for living family members. The key points of the recommendations are (1.) the forensic autopsy procedure for all SCD victims under 40 years of age, (2.) the collection and storage of adequate samples for genetic testing, (3.) communication with the families, and (4.) a multidisciplinary approach including cardiogenetic counselling.

An application of cell-cluster theory to a rare gas crystal /|n[by] K. Westera. - 260 St. Catharines [Ont.] : Dept. of Physics, Brock University,

The Lennard-Jones Devonshire 1 (LJD) single particle theory for liquids is extended and applied to the anharmonic solid in a high temperature limit. The exact free energy for the crystal is expressed as a convergent series of terms involving larger and larger sets of contiguous particles called cell-clusters. The motions of all the particles within cell-clusters are correlated to each other and lead to non-trivial integrals of orders 3, 6, 9, ... 3N. For the first time the six dimensional integral has been calculated to high accuracy using a Lennard-Jones (6-12) pair interaction between nearest neighbours only for the f.c.c. lattice. The thermodynamic properties predicted by this model agree well with experimental results for solid Xenon.

The diffusion of Co⠶溩 Zrâ â Tiâ â alloy /|nS. Kumar. -- 260 St Catharines [Ont.] : Dept. of Physics, Brock University,

The diffusion of Co60 in the body centered cubic beta phase of a ZrSOTi SO alloy has been studied at 900°, 1200°, and 1440°C. The results confirm earlier unpublished data obtained by Kidson17 • The temperature dependence of the diffusion coefficient is unusual and suggests that at least two and possibly three mechanisms may be operative Annealing of the specimen in the high B.C.C. region prior to the deposition of the tracer results in a large reduction in the diffusion coefficient. The possible significance of this effect is discussed in terms of rapid transport along dislocation network.