Evaluation of Melbourne Edge Test contrast sensitivity measures in the visually impaired

Aim: Contrast sensitivity (CS) provides important information on visual function. This study aimed to assess differences in clinical expediency of the CS increment-matched new back-lit and original paper versions of the Melbourne Edge Test (MET) to determine the CS of the visually impaired. Methods: The back-lit and paper MET were administered to 75 visually impaired subjects (28-97 years). Two versions of the back-lit MET acetates were used to match the CS increments with the paper-based MET. Measures of CS were repeated after 30 min and again in the presence of a focal light source directed onto the MET. Visual acuity was measured with a Bailey-Lovie chart and subjects rated how much difficulty they had with face and vehicle recognition. Results: The back-lit MET gave a significantly higher CS than the paper-based version (14.2 ± 4.1 dB vs 11.3 ± 4.3 dB, p < 0.001). A significantly higher reading resulted with repetition of the paper-based MET (by 1.0 ± 1.7 dB, p < 0.001), but this was not evident with the back-lit MET (by 0.1 ± 1.4 dB, p = 0.53). The MET readings were increased by a focal light source, in both the back-lit (by 0.3 ± 0.81, p < 0.01) and paper-based (1.2 ± 1.7, p < 0.001) versions. CS as measured by the back-lit and paper-based versions of the MET was significantly correlated to patients' perceived ability to recognise faces (r = 0.71, r = 0.85 respectively; p < 0.001) and vehicles (r = 0.67, r = 0.82 respectively; p < 0.001), and with distance visual acuity (both r =-0.64; p < 0.001). Conclusions: The CS increment-matched back-lit MET gives higher CS values than the old paper-based test by approximately 3 dB and is more repeatable and less affected by external light sources. Clinically, the MET score provides information on patient difficulties with visual tasks, such as recognising faces. © 2005 The College of Optometrists.

Physicians' perceptions, attitudes and expectations regarding the role of hospital-based pharmacists in the West Bank, Palestine

Objective - To evaluate the perceptions, expectations and experiences of physicians with regard to hospital-based pharmacists in the West Bank, Palestine. Methods - A self-administered questionnaire was distributed to 250 physicians practising in four general hospitals in the West Bank, Palestine. The main sections of the questionnaire comprised a series of statements pertaining to physicians' perceptions, expectations and experiences with pharmacists. Key findings - One hundred and fifty seven questionnaires were completed and returned (response rate, 62.8%). The majority of respondents were most comfortable with pharmacists detecting and preventing prescription errors (76.4%; 95% confidence interval (CI) 69.5–81.2%) and patient education (57.9%; CI 51.2–63.4%) but they were not comfortable with pharmacists suggesting the use of prescription medications to patients (56.7%; CI 49.8–62.4%). Most physicians (62.4%; CI 56.8–69.1%) expected the pharmacist to educate their patients about the safe and appropriate use of their medication. However, approximately one-third (31.7%; CI 26.0–39.6%) did not expect pharmacists to be available for consultation during rounds. Physicians' experiences with pharmacists were less favourable; whereas 77% (CI 70.2–81.5%) of the physicians agreed that pharmacists were always a reliable source of information, only 11.5% (CI 6.2–16.4%) agreed that pharmacists appeared to be willing to take responsibility for solving any drug-related problems. Conclusion -The present study showed that hospital physicians are more likely to accept traditional pharmacy services than newer clinical services for hospital-based pharmacists in the West Bank, Palestine. Pharmacists should therefore interact more positively and more frequently with physicians. This will close the gap between the physicians' commonly held perceptions of what they expect pharmacists to do and what pharmacists can actually do, and gain support for an extended role of hospital-based pharmacists in future patient therapy management.

A survey based analysis of IT adoption and 3PLs' performance

Purpose: In today's competitive scenario, effective supply chain management is increasingly dependent on third-party logistics (3PL) companies' capabilities and performance. The dissemination of information technology (IT) has contributed to change the supply chain role of 3PL companies and IT is considered an important element influencing the performance of modern logistics companies. Therefore, the purpose of this paper is to explore the relationship between IT and 3PLs' performance, assuming that logistics capabilities play a mediating role in this relationship. Design/methodology/approach: Empirical evidence based on a questionnaire survey conducted on a sample of logistics service companies operating in the Italian market was used to test a conceptual resource-based view (RBV) framework linking IT adoption, logistics capabilities and firm performance. Factor analysis and ordinary least square (OLS) regression analysis have been used to test hypotheses. The focus of the paper is multidisciplinary in nature; management of information systems, strategy, logistics and supply chain management approaches have been combined in the analysis. Findings: The results indicate strong relationships among data gathering technologies, transactional capabilities and firm performance, in terms of both efficiency and effectiveness. Moreover, a positive correlation between enterprise information technologies and 3PL financial performance has been found. Originality/value: The paper successfully uses the concept of logistics capabilities as mediating factor between IT adoption and firm performance. Objective measures have been proposed for IT adoption and logistics capabilities. Direct and indirect relationships among variables have been successfully tested. © Emerald Group Publishing Limited.

Reconfiguration of supply chain network:an ISM-based roadmap to performance

Purpose: Short product life cycle and/or mass customization necessitate reconfiguration of operational enablers of supply chain (SC) from time to time in order to harness high levels of performance. The purpose of this paper is to identify the key operational enablers under stochastic environment on which practitioner should focus while reconfiguring a SC network. Design/methodology/approach: The paper used interpretive structural modeling (ISM) approach that presents a hierarchy-based model and the mutual relationships among the enablers. The contextual relationship needed for developing structural self-interaction matrix (SSIM) among various enablers is realized by conducting experiments through simulation of a hypothetical SC network. Findings: The research identifies various operational enablers having a high driving power towards assumed performance measures. In this regard, these enablers require maximum attention and of strategic importance while reconfiguring SC. Practical implications: ISM provides a useful tool to the SC managers to strategically adopt and focus on the key enablers which have comparatively greater potential in enhancing the SC performance under given operational settings. Originality/value: The present research realizes the importance of SC flexibility under the premise of reconfiguration of the operational units in order to harness high value of SC performance. Given the resulting digraph through ISM, the decision maker can focus the key enablers for effective reconfiguration. The study is one of the first efforts that develop contextual relations among operational enablers for SSIM matrix through integration of discrete event simulation to ISM. © Emerald Group Publishing Limited.

Green supply chain performance measurement using fuzzy ANP-based balanced scorecard:a collaborative decision-making approach

The purpose of this paper is to delineate a green supply chain (GSC) performance measurement framework using an intra-organisational collaborative decision-making (CDM) approach. A fuzzy analytic network process (ANP)-based green-balanced scorecard (GrBSc) has been used within the CDM approach to assist in arriving at a consistent, accurate and timely data flow across all cross-functional areas of a business. A green causal relationship is established and linked to the fuzzy ANP approach. The causal relationship involves organisational commitment, eco-design, GSC process, social performance and sustainable performance constructs. Sub-constructs and sub-sub-constructs are also identified and linked to the causal relationship to form a network. The fuzzy ANP approach suitably handles the vagueness of the linguistics information of the CDM approach. The CDM approach is implemented in a UK-based carpet-manufacturing firm. The performance measurement approach, in addition to the traditional financial performance and accounting measures, aids in firms decision-making with regard to the overall organisational goals. The implemented approach assists the firm in identifying further requirements of the collaborative data across the supply-cain and information about customers and markets. Overall, the CDM-based GrBSc approach assists managers in deciding if the suppliers performances meet the industry and environment standards with effective human resource. © 2013 Taylor & Francis.

An Ontology- Content-based Filtering Method

Traditional content-based filtering methods usually utilize text extraction and classification techniques for building user profiles as well as for representations of contents, i.e. item profiles. These methods have some disadvantages e.g. mismatch between user profile terms and item profile terms, leading to low performance. Some of the disadvantages can be overcome by incorporating a common ontology which enables representing both the users' and the items' profiles with concepts taken from the same vocabulary. We propose a new content-based method for filtering and ranking the relevancy of items for users, which utilizes a hierarchical ontology. The method measures the similarity of the user's profile to the items' profiles, considering the existing of mutual concepts in the two profiles, as well as the existence of "related" concepts, according to their position in the ontology. The proposed filtering algorithm computes the similarity between the users' profiles and the items' profiles, and rank-orders the relevant items according to their relevancy to each user. The method is being implemented in ePaper, a personalized electronic newspaper project, utilizing a hierarchical ontology designed specifically for classification of News items. It can, however, be utilized in other domains and extended to other ontologies.

Hardware-based and Software-based Security in Digital Rights Management Solutions

The main requirements to DRM platforms implementing effective user experience and strong security measures to prevent unauthorized use of content are discussed. Comparison of hardware-based and software- based platforms is made showing the general inherent advantages of hardware DRM solutions. Analysis and evaluation of the main flaws of hardware platforms are conducted, pointing out the possibilities to overcome them. The overview of the existing concepts for practical realization of hardware DRM protection reveals their advantages and disadvantages and the increasing demand for creation of multi-core architecture, which could assure an effective DRM protection without decreasing the user’s freedom and importing risks for end system security.

Conceptual Building Information Modelling Framework for Whole‐house Refurbishment based on LCC and LCA

The UK government aims at achieving 80% CO2 emission reduction by 2050 which requires collective efforts across all the UK industry sectors. In particular, the housing sector has a large potential to contribute to achieving the aim because the housing sector alone accounts for 27% of the total UK CO2 emission, and furthermore, 87% of the housing which is responsible for current 27% CO2 emission will still stand in 2050. Therefore, it is essential to improve energy efficiency of existing housing stock built with low energy efficiency standard. In order for this, a whole‐house needs to be refurbished in a sustainable way by considering the life time financial and environmental impacts of a refurbished house. However, the current refurbishment process seems to be challenging to generate a financially and environmentally affordable refurbishment solution due to the highly fragmented nature of refurbishment practice and a lack of knowledge and skills about whole‐house refurbishment in the construction industry. In order to generate an affordable refurbishment solution, diverse information regarding costs and environmental impacts of refurbishment measures and materials should be collected and integrated in right sequences throughout the refurbishment project life cycle among key project stakeholders. Consequently, various researchers increasingly study a way of utilizing Building Information Modelling (BIM) to tackle current problems in the construction industry because BIM can support construction professionals to manage construction projects in a collaborative manner by integrating diverse information, and to determine the best refurbishment solution among various alternatives by calculating the life cycle costs and lifetime CO2 performance of a refurbishment solution. Despite the capability of BIM, the BIM adoption rate is low with 25% in the housing sector and it has been rarely studied about a way of using BIM for housing refurbishment projects. Therefore, this research aims to develop a BIM framework to formulate a financially and environmentally affordable whole‐house refurbishment solution based on the Life Cycle Costing (LCC) and Life Cycle Assessment (LCA) methods simultaneously. In order to achieve the aim, a BIM feasibility study was conducted as a pilot study to examine whether BIM is suitable for housing refurbishment, and a BIM framework was developed based on the grounded theory because there was no precedent research. After the development of a BIM framework, this framework was examined by a hypothetical case study using BIM input data collected from questionnaire survey regarding homeowners’ preferences for housing refurbishment. Finally, validation of the BIM framework was conducted among academics and professionals by providing the BIM framework and a formulated refurbishment solution based on the LCC and LCA studies through the framework. As a result, BIM was identified as suitable for housing refurbishment as a management tool, and it is timely for developing the BIM framework. The BIM framework with seven project stages was developed to formulate an affordable refurbishment solution. Through the case study, the Building Regulation is identified as the most affordable energy efficiency standard which renders the best LCC and LCA results when it is applied for whole‐house refurbishment solution. In addition, the Fabric Energy Efficiency Standard (FEES) is recommended when customers are willing to adopt high energy standard, and the maximum 60% of CO2 emissions can be reduced through whole‐house fabric refurbishment with the FEES. Furthermore, limitations and challenges to fully utilize BIM framework for housing refurbishment were revealed such as a lack of BIM objects with proper cost and environmental information, limited interoperability between different BIM software and limited information of LCC and LCA datasets in BIM system. Finally, the BIM framework was validated as suitable for housing refurbishment projects, and reviewers commented that the framework can be more practical if a specific BIM library for housing refurbishment with proper LCC and LCA datasets is developed. This research is expected to provide a systematic way of formulating a refurbishment solution using BIM, and to become a basis for further research on BIM for the housing sector to resolve the current limitations and challenges. Future research should enhance the BIM framework by developing more detailed process map and develop BIM objects with proper LCC and LCA Information.

Strategic supplier performance evaluation:a case-based action research of a UK manufacturing organisation

The main aim of this research is to demonstrate strategic supplier performance evaluation of a UK-based manufacturing organisation using an integrated analytical framework. Developing long term relationship with strategic suppliers is common in today's industry. However, monitoring suppliers' performance all through the contractual period is important in order to ensure overall supply chain performance. Therefore, client organisations need to measure suppliers' performance dynamically and inform them on improvement measures. Although there are many studies introducing innovative supplier performance evaluation frameworks and empirical researches on identifying criteria for supplier evaluation, little has been reported on detailed application of strategic supplier performance evaluation and its implication on overall performance of organisation. Additionally, majority of the prior studies emphasise on lagging factors (quality, delivery schedule and value/cost) for supplier selection and evaluation. This research proposes both leading (organisational practices, risk management, environmental and social practices) and lagging factors for supplier evaluation and demonstrates a systematic method for identifying those factors with the involvement of relevant stakeholders and process mapping. The contribution of this article is a real-life case-based action research utilising an integrated analytical model that combines quality function deployment and the analytic hierarchy process method for suppliers' performance evaluation. The effectiveness of the method has been demonstrated through number of validations (e.g. focus group, business results, and statistical analysis). Additionally, the study reveals that enhanced supplier performance results positive impact on operational and business performance of client organisation.

Linked knowledge sources for topic classification of microposts:a semantic graph-based approach

Short text messages a.k.a Microposts (e.g. Tweets) have proven to be an effective channel for revealing information about trends and events, ranging from those related to Disaster (e.g. hurricane Sandy) to those related to Violence (e.g. Egyptian revolution). Being informed about such events as they occur could be extremely important to authorities and emergency professionals by allowing such parties to immediately respond. In this work we study the problem of topic classification (TC) of Microposts, which aims to automatically classify short messages based on the subject(s) discussed in them. The accurate TC of Microposts however is a challenging task since the limited number of tokens in a post often implies a lack of sufficient contextual information. In order to provide contextual information to Microposts, we present and evaluate several graph structures surrounding concepts present in linked knowledge sources (KSs). Traditional TC techniques enrich the content of Microposts with features extracted only from the Microposts content. In contrast our approach relies on the generation of different weighted semantic meta-graphs extracted from linked KSs. We introduce a new semantic graph, called category meta-graph. This novel meta-graph provides a more fine grained categorisation of concepts providing a set of novel semantic features. Our findings show that such category meta-graph features effectively improve the performance of a topic classifier of Microposts. Furthermore our goal is also to understand which semantic feature contributes to the performance of a topic classifier. For this reason we propose an approach for automatic estimation of accuracy loss of a topic classifier on new, unseen Microposts. We introduce and evaluate novel topic similarity measures, which capture the similarity between the KS documents and Microposts at a conceptual level, considering the enriched representation of these documents. Extensive evaluation in the context of Emergency Response (ER) and Violence Detection (VD) revealed that our approach outperforms previous approaches using single KS without linked data and Twitter data only up to 31.4% in terms of F1 measure. Our main findings indicate that the new category graph contains useful information for TC and achieves comparable results to previously used semantic graphs. Furthermore our results also indicate that the accuracy of a topic classifier can be accurately predicted using the enhanced text representation, outperforming previous approaches considering content-based similarity measures. © 2014 Elsevier B.V. All rights reserved.

Comparison of Multivariate and Univariate Models for Genetic Evaluation of Milk Yield based on Test Day Data

2000 Mathematics Subject Classification: 62H12, 62P99

Classification of Chenopodium Genus Populations and Species Based on Continuous and Categorical Variables

2000 Mathematics Subject Classification: 62P10, 62H30

Does the subject content of the pharmacy degree course influence the community pharmacist’s views on competencies for practice?

Do community pharmacists coming from different educational backgrounds rank the importance of competences for practice differently-or is the way in which they see their profession more influenced by practice than university education? A survey was carried out on 68 competences for pharmacy practice in seven countries with different pharmacy education systems in terms of the relative importance of the subject areas chemical and medicinal sciences. Community pharmacists were asked to rank the competences in terms of relative importance for practice; competences were divided into personal and patient-care competences. The ranking was very similar in the seven countries suggesting that evaluation of competences for practice is based more on professional experience than on prior university education. There were some differences for instance in research-related competences and these may be influenced, by education.

A likviditási mutatószámok struktúrája (Structure of liquidity measures)

A likviditás mérésére többféle mutató terjedt el, amelyek a likviditás jelenségét különböző szempontok alapján számszerűsítik. A cikk a szakirodalom által javasolt, különféle likviditási mutatókat elemzi sokdimenziós statisztikai módszerekkel: főkomponens-elemzés segítségével keresünk olyan faktorokat, amelyek legjobban tömörítik a likviditási jellemzőket, majd megnézzük, hogy az egyes mutatók milyen mértékben mozognak együtt a faktorokkal, illetve a korrelációk alapján klaszterezési eljárással keresünk hasonló tulajdonságokkal bíró csoportokat. Arra keressük a választ, hogy a rendelkezésünkre álló minta elemzésével kialakított változócsoportok egybeesnek-e a likviditás egyes aspektusaihoz kapcsolt mutatókkal, valamint meghatározhatók-e olyan összetett likviditási mérőszámok, amelyeknek a segítségével a likviditás jelensége több dimenzióban mérhető. / === / Liquidity is measured from different aspects (e.g. tightness, depth, and resiliency) by different ratios. We studied the co-movements and the clustering of different liquidity measures on a sample of the Swiss stock market. We performed a PCA to obtain the main factors that explain the cross-sectional variability of liquidity measures, and we used the k-means clustering methodology to defi ne groups of liquidity measures. Based on our explorative data analysis, we formed clusters of liquidity measures, and we compared the resulting groups with the expectations and intuition. Our modelling methodology provides a framework to analyze the correlation between the different aspects of liquidity as well as a means to defi ne complex liquidity measures.

Formal professional relationships between general practitioners and specialists: possible associations with patient health and pharmacy costs

This article investigates whether the strength of formal professional relationships between general practitioners (GPs) and specialists (SPs) affects either the health status of patients or their pharmacy costs. To this end, it measures the strength of formal professional relationships between GPs and SPs through the number of shared patients and proxies the patient health status by the number of comorbidities diagnosed and treated. In strong GP–SP relationships, the patient health status is expected to be high, due to efficient care coordination, and the pharmacy costs low, due to effective use of resources. To test these hypotheses and compare the characteristics of the strongest GP–SP connections with those of the weakest, this article concentrates on diabetes—a chronic condition where patient care coordination is likely important. Diabetes generates the largest shared patient cohort in Hungary, with the highest traffic of specialist medication prescriptions. This article finds that stronger ties result in lower pharmacy costs, but not in higher patient health statuses. Key points for decision makers • The number of shared patients may be used to measure the strength of formal professional relationships between general practitioners and specialists. • A large number of shared patients indicates a strong, collaborative tie between general practitioners and specialists, whereas a low number indicates a weak, fragmented tie. • Tie strength does not affect patient health—strong, collaborative ties between general practitioners and specialists do not involve better patient health than weak, fragmented ties. • Tie strength does affect pharmacy costs—strong, collaborative ties between general practitioners and specialists involve significantly lower pharmacy costs than weak, fragmented ties. • Pharmacy costs may be reduced by lowering patient care fragmentation through channelling a general practitioner’s patients to a small number of specialists and increasing collaboration between general practitioner and specialists. • Limited patient choice is financially more beneficial than complete freedom of choice, and no more detrimental to patient health.