CRITICAL APPLICATIONS OF SW 846 US EPA METHODS TO EVALUATION OF MARINE SAMPLES QUALITY

Technical evaluation of analytical data is of extreme relevance considering it can be used for comparisons with environmental quality standards and decision-making as related to the management of disposal of dredged sediments and the evaluation of salt and brackish water quality in accordance with CONAMA 357/05 Resolution. It is, therefore, essential that the project manager discusses the environmental agency`s technical requirements with the laboratory contracted for the follow-up of the analysis underway and even with a view to possible re-analysis when anomalous data are identified. The main technical requirements are: (1) method quantitation limits (QLs) should fall below environmental standards; (2) analyses should be carried out in laboratories whose analytical scope is accredited by the National Institute of Metrology (INMETRO) or qualified or accepted by a licensing agency; (3) chain of custody should be provided in order to ensure sample traceability; (4) control charts should be provided to prove method performance; (5) certified reference material analysis or, if that is not available, matrix spike analysis, should be undertaken and (6) chromatograms should be included in the analytical report. Within this context and with a view to helping environmental managers in analytical report evaluation, this work has as objectives the discussion of the limitations of the application of SW 846 US EPA methods to marine samples, the consequences of having data based on method detection limits (MDL) and not sample quantitation limits (SQL), and present possible modifications of the principal method applied by laboratories in order to comply with environmental quality standards.

Revision of the genus Spinosipella (Bivalvia : Verticordiidae), with descriptions of two new species from Brazil

A revision of the deep-water verticordiid genus Spinosipella is provided, based on conchological and anatomical characters. The genus is considered distinct from Verticordia (of which it was considered a subgenus) based on the strong ribs, prickly surface, reduction of lunula, relative large size, weakly spiral valve shape, and other characters. The following species are considered in the genus: (1) Spinosipella agnes new species, ranging from Florida, USA, to Rio de Janeiro, Brazil, and also including the Porcupine Abyssal Plain in the North Atlantic; (2) S. tinga new species, occurring from Rio de Janeiro to Rio Grande do Sul, Brazil; (3) S. acuticostata (Philippi, 1844), a Pliocene fossil from southern Italy; (4) S. deshayesiana (Fischer, 1862), from south and central Indo-Pacific (S. ericia Hedley, 1911, the type species of the genus, was revealed to be a new synonym of S. deshayesiana); and (5) S. costeminens (Poutiers, 1981), from the tropical west Pacific. The five species differ mainly in conchological details of the number and size of ribs, of the prickly sculpture, shape of the shell, of the hinge and the degree of convexity. Anatomical description is also provided for the two Pacific species, which differ among themselves mainly by the size of the pair of renal folds. From the standpoint of anatomical characters, the more significant are: the wide lithodesma; the elongation of the auricles, crossing the roof of pallial cavity; a tall digital fold in posterior region of supraseptal chamber; the low but wide palps; the muscular, gizzard-like stomach; the complete separation of both constituents of the hermaphroditic gonad (a ventro-posterior testicle and a centro-dorsal ovary), and a complete fusion of the visceral ganglia.

A multiple time scale survival model with a cure fraction

Many recent survival studies propose modeling data with a cure fraction, i.e., data in which part of the population is not susceptible to the event of interest. This event may occur more than once for the same individual (recurrent event). We then have a scenario of recurrent event data in the presence of a cure fraction, which may appear in various areas such as oncology, finance, industries, among others. This paper proposes a multiple time scale survival model to analyze recurrent events using a cure fraction. The objective is analyzing the efficiency of certain interventions so that the studied event will not happen again in terms of covariates and censoring. All estimates were obtained using a sampling-based approach, which allows information to be input beforehand with lower computational effort. Simulations were done based on a clinical scenario in order to observe some frequentist properties of the estimation procedure in the presence of small and moderate sample sizes. An application of a well-known set of real mammary tumor data is provided.

A cross-over randomised clinical trial of eccentric occlusion in complete dentures

The objective of this study is to compare the effects of canine guidance (CG) and bilateral balanced occlusion (BBO) on denture satisfaction and kinesiographic parameters of complete denture wearers, by means of a cross-over trial. Fifty edentulous patients received new maxillary and mandibular complete dentures. After the intra-oral adjustments and adaptation period, 44 participants were enrolled in the trial and randomly received a sequence of occlusal schemes: BBO followed by CG, or CG followed by BBO. Outcomes were assessed after 30 days of each occlusal scheme. Participants answered a denture satisfaction questionnaire and a kinesiograph instrument recorded mandibular physiologic movements and pattern of maxillary denture movement during chewing. Wilcoxon test and paired sample t-test were used to compare satisfaction levels and kinesiographic data for each occlusal scheme, respectively (a = 0.05). The results showed no differences between occlusal schemes on participants satisfaction and in any of the kinesiographic parameters studied, except for the vertical intrusion of the maxillary complete denture during chewing, which was lower with CG. It can be concluded that the occlusal scheme did not influence on satisfaction and kinesiographic parameters evaluated, as long as volume and resilience of residual edentulous ridges of the participants were normal. Clinical Trial Registration Identifier: NC.T01420536.

Solvent-Resistant Polymeric Sensors for Adulteration Detection in Liquid Fuels

Polymeric sensors with improved resistance to organic solvents were produced via the layer-by-layer thin film deposition followed by chemical cross-linking. According to UV-vis spectroscopy, the mass loss of polyaniline/poly(vinyl alcohol) and polyaniline/novolac-type resin based films deposited onto glass slides was less than 20% when they were submitted to successive immersions (up to 3,000 immersion cycles) into commercially available ethanol and gasoline fuel samples. Polyallylamine hydrochloride/nickel tetrasulfonated phthalocyanine films presented similar stability. The electrical responses assessed by impedance spectroscopy of films deposited onto Au-interdigitated microelectrodes were relatively unaffected after continuous or cyclic immersions into both fuels. After these studies, an array including these polymeric sensors was employed to detect adulteration in ethanol and gasoline samples. After principal component analysis, it was possible to conclude that the proposed sensor array is capable to discriminate with remarkable reproducibility ethanol samples containing different amounts of water or else gasoline samples containing different amounts of ethanol. In both examples, more than 90% of data variance was retained in the first principal component. For each type of sample, ethanol and gasoline, it was found a linear correlation between one of the principal components and the sample's composition. These findings allow one to conclude that these films present great potential for the development of reliable and low-cost sensors for fuel analysis in liquid phase.

Precision of Usual Food Intake Estimates According to the Percentage of Individuals with a Second Dietary Measurement

Background Statistical methods for estimating usual intake require at least two short-term dietary measurements in a subsample of the target population. However, the percentage of individuals with a second dietary measurement (replication rate) may influence the precision of estimates, such as percentiles and proportions of individuals below cut-offs of intake. Objective To investigate the precision of the usual food intake estimates using different replication rates and different sample sizes. Participants/setting Adolescents participating in the continuous National Health and Nutrition Examination Survey 2007-2008 (n=1,304) who completed two 24-hour recalls. Statistical analyses performed The National Cancer Institute method was used to estimate the usual intake of dark green vegetables in the original sample comprising 1,304 adolescents with a replication rate of 100%. A bootstrap with 100 replications was performed to estimate CIs for percentiles and proportions of individuals below cut-offs of intake. Using the same bootstrap replications, four sets of data sets were sampled with different replication rates (80%, 60%, 40%, and 20%). For each data set created, the National Cancer Institute method was performed and percentiles, Cl, and proportions of individuals below cut-offs were calculated. Precision estimates were checked by comparing each Cl obtained from data sets with different replication rates with the Cl obtained from original data set. Further, we sampled 1,000, 750, 500, and 250 individuals from the original data set, and performed the same analytical procedures. Results Percentiles of intake and percentage of individuals below the cut-off points were similar throughout the replication rates and sample sizes, but the Cl increased as the replication rate decreased. Wider CIs were observed at 40% and 20% of replication rate. Conclusions The precision of the usual intake estimates decreased when low replication rates were used. However, even with different sample sizes, replication rates >40% may not lead to an important loss of precision. J Acad Nutr Diet. 2012;112:1015-1020.

A Single Statistic for Monitoring the Covariance Matrix of Bivariate Processes

In this article, we present a new control chart for monitoring the covariance matrix in a bivariate process. In this method, n observations of the two variables were considered as if they came from a single variable (as a sample of 2n observations), and a sample variance was calculated. This statistic was used to build a new control chart specifically as a VMIX chart. The performance of the new control chart was compared with its main competitors: the generalized sampled variance chart, the likelihood ratio test, Nagao's test, probability integral transformation (v(t)), and the recently proposed VMAX chart. Among these statistics, only the VMAX chart was competitive with the VMIX chart. For shifts in both variances, the VMIX chart outperformed VMAX; however, VMAX showed better performance for large shifts (higher than 10%) in one variance.

CeO2 nanoparticles synthesized by a microwave-assisted hydrothermal method: evolution from nanospheres to nanorods

Ceria (CeO2) plays a vital role in emerging technologies for environmental and energy-related applications. The catalytic efficiency of ceria nanoparticles depends on its morphology. In this study, CeO2 nanoparticles were synthesized by a microwave-assisted hydrothermal method under different synthesis temperatures. The samples were characterized by X-ray diffraction, transmission electron microscopy, Raman scattering spectroscopy, electron paramagnetic resonance spectroscopy and by the Brunauer-Emmett-Teller method. The X-ray diffraction and Raman scattering results indicated that all the synthesized samples had a pure cubic CeO2 structure. Rietveld analysis and Raman scattering also revealed the presence of structural defects due to an associated reduction in the valence of the Ce4+ ions to Ce3+ ions caused by an increasing molar fraction of oxygen vacancies. The morphology of the samples was controlled by varying the synthesis temperature. The TEM images show that samples synthesized at 80 degrees C consisted of spherical particles of about 5 nm, while those synthesized at 120 degrees C presented a mix of spherical and rod-like nanoparticles and the sample synthesized at 160 degrees C consisted of nanorods with 10 nm average diameter and 70 nm length. The microwave-assisted method proved to be highly efficient for the synthesis of CeO2 nanoparticles with different morphologies.

Panorama atual dos repositórios institucionais das instituições de ensino superior no Brasil

O cenário atual de repositórios digitais mundialmente distribuídos estimula estudos diversificados com os quais esse trabalho visa contribuir, objetivando um levantamento dos repositórios de instituições de ensino superior no Brasil, verificando a eficácia de uma ferramenta experimental no tratamento e análise dos dados e usando como fontes os diretórios Registry of Open Access Repositories (ROAR), Directory of Open Access Repositories (OpenDOAR), Diretório Luso-Brasileiro de Periódicos e Repositórios de Acesso Livre e a lista L_repositories. A ferramenta experimental Google Fusion Tables foi aplicada nos dados dos repositórios institucionais pesquisados, categorizando suas principais características: Instituição mantenedora, Natureza da instituição, Local, Região geográfica, Software adotado e sua versão, adoção do padrão Dublin Core e quantidade de trabalhos disponibilizados na data do estudo. Foram identificados 49 repositórios que em agosto de 2013 disponibilizavam 396.881 itens, sendo as instituições federais as com maior povoamento e o repositório LUME o primeiro em volume de itens; a região Sudeste com o maior número de repositórios e volume de itens disponibilizados; o DSpace o software predominante, com maior utilização da versão 1.6.2 e o padrão de metadados Dublin Core em todas as aplicações desse software. Este estudo comprovou a eficácia e utilidade do FusionTables, permitindo caracterizar o panorama atual de repositórios de instituições de ensino superior no Brasil. Os resultados foram disponibilizados em um Catálogo de Repositórios de Instituições de Ensino Superior no Brasil e um Mapa interativo dos Repositórios de Instituições de Ensino Superior no Brasil.

Interazioni tra Glicoproteine che mediano la penetrazione del Virus Herpes Simplex nella cellula e disegno razionale di Peptidi Inibitori

Herpes simplex virus entry into cells requires a multipartite fusion apparatus made of gD, gB and heterodimer gH/gL. gD serves as receptor-binding glycoprotein and trigger of fusion; its ectodomain is organized in a N-terminal domain carrying the receptor-binding sites, and a C-terminal domain carrying the profusion domain, required for fusion but not receptor-binding. gB and gH/gL execute fusion. To understand how the four glycoproteins cross-talk to each other we searched for biochemical defined complexes in infected and transfected cells, and in virions. We report that gD formed complexes with gB in absence of gH/gL, and with gH/gL in absence of gB. Complexes with similar composition were formed in infected and transfected cells. They were also present in virions prior to entry, and did not increase at virus fusion with cell. A panel of gD mutants enabled the preliminary location of part of the binding site in gD to gB to the aa 240-260 portion and downstream, with T306P307 as critical residues, and of the binding site to gH/gL at aa 260-310 portion, with P291P292 as critical residues. The results indicate that gD carries composite independent binding sites for gB and gH/gL, both of which partly located in the profusion domain. The second part of the project dealt with rational design of peptides inhibiting virus entry has been performed. Considering gB and gD, the crystal structure is known, so we designed peptides that dock in the structure or prevent the adoption of the final conformation of target molecule. Considering the other glycoproteins, of which the structure is not known, peptide libraries were analyzed. Among several peptides, some were identified as active, designed on glycoprotein B. Two of them were further analyzed. We identified peptide residues fundamental for the inhibiting activity, suggesting a possible mechanism of action. Furthermore, changing the flexibility of peptides, an increased activity was observed,with an EC50 under 10μM. New approaches will try to demonstrate the direct interaction between these peptides and the target glycoprotein B.

Finite-strain analysis in orthogneiss of the Gran Paradiso massif, Western Alps, Italy

A finite-strain study in the Gran Paradiso massif of the Italian Western Alps has been carried out to elucidate whether ductile strain shows a relationship to nappe contacts and to shed light on the nature of the subhorizontal foliation typical of the gneiss nappes in the Alps. The Rf/_ and Fry methods used on feldspar porphyroclasts from 143 augengneiss and 11 conglomerate samples of the Gran Paradiso unit (upper tectonic unit of the Gran Paradiso massif), as well as, 9 augengneiss (Erfaulet granite) and 3 quartzite conglomerate samples from the underlying Erfaulet unit (lower unit of the Gran Paradiso massif), and 1 sample from mica schist. Microstructures and thermobarometric data show that feldspar ductility at temperatures >~450°C occurred only during high-pressure metamorphism, when the rocks were underplated beneath the overriding Adriatic plate. Therefore, the finite-strain data can be related to high-pressure metamorphism in the Alpine subduction zone. The augen gneiss was heterogeneously deformed and axial ratios of the strain ellipse in XZ sections range from 2.1 to 69.8. The long axes of the finite-strain ellipsoids trend W/WNW and the short axes are subvertical associated with a subhorizontal foliation. The strain magnitudes do not increase towards the nappe contacts. Geochemical work shows that the accumulation of finite strain was not associated with any significant volume strain. Hence, the data indicate flattening strain type in the Gran Paradiso unit and constrictional strain type in the Erfaulet unit and prove deviations from simple shear. In addition, electron microprobe work was undertaken to determine if the analysed fabrics formed during high-P metamorphism. The chemistry of phengites in the studied samples suggests that deformation and final structural juxtaposition of the Gran Paradiso unit against the Erfaulet took place during high-pressure metamorphism. On the other hand, nappe stacking occurred early during subduction probably by brittle imbrication and that ductile strain was superimposed on and modified the nappe structure during high-pressure underplating in the Alpine subduction zone. The accumulation of ductile strain during underplating was not by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the Gran Paradiso massif. It is concluded that this foliation formed during thrusting of the nappes onto each other suggesting that nappe stacking was associated with vertical shortening. The primary evidence for this interpretation is an attenuated metamorphic section with high-pressure metamorphic rocks of the Gran Paradiso unit juxtaposed against the Erfaulet unit. Therefore, the exhumation during high-pressure metamorphism in the Alpine subduction zone involved a component of vertical shortening, which is responsible for the subhorizontal foliation within the nappes.

Anaerobic oxidation of ethanol over spinel mixed oxides: the first step in the steam-iron process for H2 production

The future hydrogen demand is expected to increase, both in existing industries (including upgrading of fossil fuels or ammonia production) and in new technologies, like fuel cells. Nowadays, hydrogen is obtained predominantly by steam reforming of methane, but it is well known that hydrocarbon based routes result in environmental problems and besides the market is dependent on the availability of this finite resource which is suffering of rapid depletion. Therefore, alternative processes using renewable sources like wind, solar energy and biomass, are now being considered for the production of hydrogen. One of those alternative methods is the so-called “steam-iron process” which consists in the reduction of a metal-oxide by hydrogen-containing feedstock, like ethanol for instance, and then the reduced material is reoxidized with water to produce “clean” hydrogen (water splitting). This kind of thermochemical cycles have been studied before but currently some important facts like the development of more active catalysts, the flexibility of the feedstock (including renewable bio-alcohols) and the fact that the purification of hydrogen could be avoided, have significantly increased the interest for this research topic. With the aim of increasing the understanding of the reactions that govern the steam-iron route to produce hydrogen, it is necessary to go into the molecular level. Spectroscopic methods are an important tool to extract information that could help in the development of more efficient materials and processes. In this research, ethanol was chosen as a reducing fuel and the main goal was to study its interaction with different catalysts having similar structure (spinels), to make a correlation with the composition and the mechanism of the anaerobic oxidation of the ethanol which is the first step of the steam-iron cycle. To accomplish this, diffuse reflectance spectroscopy (DRIFTS) was used to study the surface composition of the catalysts during the adsorption of ethanol and its transformation during the temperature program. Furthermore, mass spectrometry was used to monitor the desorbed products. The set of studied materials include Cu, Co and Ni ferrites which were also characterized by means of X-ray diffraction, surface area measurements, Raman spectroscopy, and temperature programmed reduction.

La navigazione nella chirurgia oncologica ortopedica: Applicazione ed implementazione di nuove tecnologie per il trattamento chirurgico dei tumori dell'apparato muscolo-scheletrico, studio pilota

Nel presente progetto di ricerca, da novembre 2011 a novembre 2013 , sono stati trattati chirurgicamente, con l’assistenza del navigatore , pazienti con tumori ossei primitivi degli arti, del bacino e del sacro, analizzando i risultati degli esami istologici dei margini di resezione del tumore e i risultati clinici e radiografici. Materiali e metodi : Abbiamo analizzato 16 pazienti 9 maschi e 7 femmine , con un'età media di 31 anni (range 12-55 ). Di tutti i pazienti valutati 8 avevano una localizzazione agli arti inferiori , 4 al bacino e 4 all'osso sacro . Solo quelli con osteosarcoma parostale , Cordoma e Condrosarcoma non sono stati sottoposti a terapia antiblastica . Solo un paziente è stato sottoposto a radioterapia postoperatoria per una recidiva locale . Tutti gli altri pazienti non sono stati trattati con la radioterapia per l’ adeguatezza dei margini di resezione . Non ci sono state complicanze intraoperatorie . Nel periodo postoperatorio abbiamo osservato una vescica neurologica , una paresi sciatica, due casi di infezione di cui una superficiale e una profonda, tutti e quattro i pazienti con sarcoma sacrale sviluppati hanno avuto ritardato della guarigione della ferita e di questi tre hanno avuto incontinenza sfinterica. In tutti i casi si è ottenuta una eccellente risultato clinico e radiografico , con soddisfazione del paziente , corretto contatto tra l'osteotomia e l'impianto che apparivano stabili ai primi controlli ambulatoriali ( FU 19 mesi). Risultati: La chirurgia assistita da calcolatore ha permesso di migliorare l’esecuzione delle resezioni ossee prevista dal navigatore. Questa tecnologia è valida e utile per la cure dei tumori dell’apparato scheletrico, soprattutto nelle sedi anatomiche più complesse da trattare come la pelvi, il sacro e nelle resezioni intercalari difficoltose nell’ottenere un margine di resezione ampio e quindi di salvare l’articolazione e l’arto stesso.

Emerging adulthoods. Percorsi giovanili di partecipazione e cittadinanza in prospettiva intergenerazionale

La tesi tematizza come proprio oggetto di indagine i percorsi di partecipazione politica e civica dei giovani nei contesti di transizione alla vita adulta, concentrandosi sull’influenza delle relazioni tra generazioni su tali espressioni di coinvolgimento. L’approfondimento empirico consiste in una ricerca qualitativa condotta presso il quartiere Navile di Bologna nel 2012. Basandosi sull’approccio metodologico della grounded theory, essa ha coinvolto un campione di giovani e un campione di adulti per loro significativi attraverso interviste semistrutturate. Dall’analisi emerge una rilevante disaffezione giovanile nei confronti della politica che, tuttavia, non traduce in un rifiuto del coinvolgimento, ma in una “partecipazione con riserva” espressa attraverso atteggiamenti tutt’altro che passivi nei confronti della politica formale - basati sulla logica della riforma, della resistenza o della ribellione - e mediante un forte investimento in attività partecipative non convenzionali (associazionismo e coinvolgimento). A fare da sfondo all’interesse partecipativo dei giovani si colloca una lettura negativa della propria condizione presente ed un conseguente conflitto intergenerazionale piuttosto manifesto, che si riflette sulle stesse modalità di attivazione. La politica, nelle sue espressioni più strettamente formali, viene interpretata come un ‘territorio adulto’, gestito secondo logiche che lasciano poco spazio ai giovani i quali, per tale ragione, scelgono di attivarsi secondo modalità alternative in cui il confronto con l’altro, quando presente, avviene prevalentemente tra pari o su basi avvertite come più paritarie. Il distanziamento dei giovani dalla politica formale riflette quindi una parallela presa di distanza dagli adulti, i quali risultano smarriti nello svolgimento delle loro funzioni di modello e di riconoscimento. La loro ambivalenza rispetto ai giovani - ossia il continuo oscillare tra il profondo pessimismo e il cieco ottimismo, tra la guida direttiva e la deresponsabilizzazione - si traduce in un riconoscimento parziale delle reali potenzialità ed esigenze dei giovani come cittadini ed adulti emergenti.

Identifizierung und Quantifizierung der Ketocarotinoide in Dauerstadien von Grünalgen und Ketocarotinoidbiosynthese im Modellorganismus Chlamydomonas reinhardtii

Grünalgen bilden zur Überdauerung schlechter Umweltbedingungen Ruhestadien, die sich durch Ausbildung einer festen Zellwand, die Reduktion des Plastiden und die starke Akkumulation von Speicherfetten und Ketocarotinoiden im Zytosol auszeichnen. Obwohl Ketocarotinoide in Grünalgen seit über vierzig Jahren beforscht werden, gab es hierzu noch wenige molekularbiologische Untersuchungen. Im Vorfeld meiner Promotion wurde durch unsere Arbeitsgruppe entdeckt, dass auch der molekular gut zugängliche Modellorganismus Chlamydomonas reinhardtii im Zygotenstadium große Mengen an Ketocarotinoiden bildet. Neben dem zu erwartenden Ketocarotinoid Astaxanthin fanden wir große Mengen des bisher nur in einer Grünalge beschriebenen 4-Ketoluteins. Vorversuche ließen die Vermutung aufkommen, dass dieses Pigment bei der Untersuchung der Pigmentausstattung in Dauerstadien von vielen Grünalgen bisher übersehen wurde. rnIn der vorliegenden Arbeit wurde daher zunächst die Pigmentzusammensetzung von Dauerstadien der bereits gut untersuchten Grünalgen Muriella zofingiensis und Scenedesmus rubescens durch Vergleich mit dem Ketocarotinoidmuster aus Dauerstadien von C. reinhardtii und Fritschiella tuberosa reevaluiert und dabei erstmals das Vorkommen signifikanter Mengen an 4-Ketolutein nachgewiesen. Außerdem zeigte sich, dass die als bisheriger Modellorganismus der Ketocarotinoidbiosynthese in Grünalgen sehr gut untersuchte Alge Haematococcus pluvialis eher eine Ausnahme darstellt, da ihre Dauerstadien als einzige der hier untersuchten Algen nur minimale Mengen von 4 Ketolutein aufwiesen. Diese Beobachtungen machen es sehr wahrscheinlich, dass die Fähigkeit zur Bildung von 4-Ketolutein unter den Grünalgen wesentlich weiter verbreitet ist als bisher angenommen. Das sekundäre Carotinoid 4-Ketolutein kam in den Dauerstadien der Grünalgen neben seiner freien Form ausschließlich als Monoacylester vor, im Gegensatz zu Astaxanthin, das als mono- und diacylierte Form auftrat. rnÜber die Analyse der Pigmentausstattung hinaus konnten die entscheidenden Schritte des Synthesewegs der Ketocarotinoide in C. reinhardtii durch funktionelle Charakterisierung der beteiligten Enzyme in Bakterien aufgeklärt werden. Als Basis für die Charakterisierungen wurde ein umfangreiches Portfolio von carotinogenen E. coli-Bakterien etabliert, darunter α Carotin und Lutein produzierende Stämme, die bisher nicht zur Verfügung standen. Das wurde durch die Klonierung der Lycopinzyklase (OluLCY) aus der Grünalge Ostreococcus lucimarinus möglich, die eine Sonderolle unter den Zyklasen einnimmt, da sie die Lycopin-β-Zyklase und Lycopin-ε-Zyklase in einem Fusionsenzym vereint. Vorteile dieses Fusionsenzyms sind die Expressionskontrolle durch nur einen Promotor und die weitgehend konstante Stöchiometrie seiner Produkte α-Carotin und β-Carotin, was die OluLCY für die biotechnologische Anwendung prädestiniert.rnDie funktionelle Charakterisierung der Carotinoidbiosyntheseenzyme aus C. reinhardtii umfasste das Schlüsselenzym der Ketocarotinoidbiosynthese, die β-Carotin-Ketolase (BKT), sowie die Carotinoid-Hydroxylasen CHYB, CYP97A5 und CYP97C3. Dabei wurde für das BKT-Enzym aus C. reinhardtii nachgewiesen, dass es nicht nur die Ketolierung von β Carotin zu Canthaxanthin und von Zeaxanthin zu Astaxanthin, sondern auch die Bildung der von α-Carotin abgeleiteten Ketocarotinoide wie 4-Keto-α-Carotin und 4 Ketolutein katalysieren kann.rn