Technique for improving the reception of scattering signal behind an obstacle

This thesis presents a solution to the problem of receiving a signal in the shadow and fringe areas. Theoretical and experimental investigation of the field behind an obstacle in a line of sight transmission path for UHF / microwave signals has resulted in a new approach to the analysis of electromagnetic fields in the shadow of an obstacle. Analysis using this approach showed the field to consist of varying amplitude and phase distribution. Additional analysis predicted an increase in received signal could be achieved if correlation between the field and antenna structure could be obtained. This was accomplished with a new antenna design. The thesis presents experimental and photographic evidence to support the theory. A novel technique involving the matching of the antenna structure to the field distribution, resulted in an increase of received signal in the diffracted field of up to 4 dB.

Characteristcs of conducting textiles in the microwave frequency range

This investigation of textiles coated with a polymer that conducts electricity showed that they can be used for effectively reflecting and absorbing microwaves. These conducting textiles are an economical, flexible and lightweight alternative to traditional materials for electromagnetic interference shielding of, for instance, sensitive electronic equipment.

Investigation into and control of microwave induced thermal run-away

Analyses the mechanisms that cause thermal run-away in some materials. A control strategy was devised to provide effective temperature control independent of material characteristics. The set of control criteria derived from mathematical models allowed the control limits of a microwave processing system to calculated.

Microwave dielectric properties of PTFE/rutile nanocomposites

The effects of nano-size rutile filler on the microwave dielectric properties of PTFE composites were investigated and the results were compared with that of micron size rutile filled composites. Nano-size rutile powder was prepared through sol–gel route and the filled PTFE composites were fabricated through SMECH process. Different characterization techniques such as powder X-ray diffraction, SEM, BET, TEM and TG/DSC were employed to analyze the nature of ceramic filler. The dielectric properties of filled composites were evaluated at microwave frequency region using waveguide cavity perturbation technique. Different theoretical models have been employed to predict the variation of dielectric constant with respect to filler loading. The moisture absorption characteristics of nano-rutile filled PTFE composites were measured as per IPC-TM-650 2.6.2 standards. Composites show high dielectric constant at X-band frequency region with relatively high loss tangent compared to micron size counterpart.

Microwave-accelerated 1,3-dipolar cycloaddition for the formation of fused [n]polynorbornanes

Microwave irradiation induces the 1,3-dipolar cycloaddition of cyclobutane epoxides with norbornenes to afford [n]polynorbornane scaffolds. Greatly enhanced reaction rates and significantly reduced levels of decomposition were observed.

Preparation, characterization and dielectric properties of temperature stable SrTiO3/PEEK composites for microwave substrate applications

Poly(ether ether ketone) (PEEK) is a potential candidate for electronic applications due to its low permittivity, low loss, high melting point, better chemical resistance, excellent insulating properties and easy processibility. Present paper discusses the preparation and characterization of SrTiO3 filled PEEK composite for microwave substrate applications. The dielectric constant, dielectric loss and temperature variation of dielectric constant of the composites have been studied up to 1 MHz using an Impedance Analyzer. Different theoretical approaches have been employed to predict the effective permittivity of composite systems and the results are compared with that of the experimental data. The crystallinity of the bulk composite is studied by X-ray diffraction studies. Scanning electron microscopic technique has been employed to study the dispersion of the particulate filler in PEEK matrix. Vickers hardness of pure and filled PEEK composite has been measured using Microhardness Tester. The effect of particle size on the dielectric as well as mechanical properties of SrTiO3/PEEK composite system is also studied by incorporating micronsize and nanosize fillers. Present study shows that a temperature stable composite can be realized by judiciously selecting appropriate filler concentration in the PEEK matrix.

Microwave-assisted direct amination : rapid access to multi-functionalized N6-substituted adenosines

Analogues of adenosine have a range of interesting biological activities and potential therapeutic applications. A method for the efficient preparation of highly functionalized N6-substituted adenosines has been developed from the corresponding tert-butyldimethylsilyl-protected inosine. The key step in this procedure is a microwave-assisted amination reaction between an appropriately substituted inosine and an amine in the presence of PyBroP. High yields of desired N6-substituted adenosines were achieved with hindered amines and the reaction was also found to accommodate a range of substituents on the inosine precursor.

Multi-input-multi-output antennas for radio frequency identification systems

In this chapter the authors discuss the physical insight of the role of wireless communication in RFID systems. In this respect, this chapter gives a brief introduction on the wireless communication model followed by various communication schemes. The chapter also discusses various channel impairments and the statistical modeling of fading channels based on the environment in which the RFID tag and reader may be present. The chapter deals with the fact that the signal attenuations can be dealt with up to some level by using multiple antennas at the reader transmitter and receiver to improve the performance. Thus, this chapter discusses the use of transmit diversity at the reader transmitter to transmit multiple copies of the signal. Following the above, the use of receiver combining techniques are discussed, which shows how the multiple copies of the signal arriving at the reader receiver from the tag are combined to reduce the effects of fading. The chapter then discusses various modulation techniques required to modulate the signal before transmitting over the channel. It then presents a few channel estimation algorithms, according to which, by estimating the channel state information of the channel paths through which transmission takes place, performance of the wireless system can be further increased. Finally, the Antenna selection techniques are presented, which further helps in improving the system performance.

Accessing highly-halogenated flavanones using protic ionic liquids and microwave irradiation

A series of highly-functionalized 2'-hydroxychalcones have been synthesized using a microwave-assisted Claisen-Schmidt condensation. Conversion of these 2'-hydroxychalcones to their corresponding flavanones was then performed utilizing protic ionic liquids (pIL) and microwave irradiation. This methodology drastically reduces reaction time to 15 minutes compared to typical thermal methods (24 hrs) and is tolerant to a broad range of functional groups. Several chalcones reported bear four and five substituents - a degree of substitution rarely reported in the literature.