PRODUÇÃO DE MATERIAL INSTRUCIONAL PARA O ENSINO DA RADIOLOGIA POR MEIO DA DIGITALIZAÇÃO DE IMAGENS

Criou-se um banco de dados usando a digitalização de imagens radiográficas para salvá-las da deterioração do tempo e, também, tornar mais ágil sua manipulação pelos profissionais que as utilizam. Foi criado um banco de dados que torna possível o armazenamento dos dados clínicos de cada paciente e, vinculadas a esses dados, suas respectivas imagens digitalizadas, com o propósito de ensino e pesquisa. Os elementos que compõem o banco de dados foram determinados por meio de pesquisa feita com os professores do Departamento de Radiologia da Universidade Federal do Rio de Janeiro. Conseguiu-se elaborar um sistema que contém dados e imagens, de baixo custo e de fácil manipulação por parte dos usuários.

The high-speed induction motor: calculating the effects of solid-rotor material on machine characteristics

A method for the analysis of high-speed solid-rotor induction motors in presented. The analysis is based on a new combination of the three dimensional linear method and the transfer matrix method. Both saturation and finite length effects are taken into account. The active region of the solid rotor is divided into saturated and unsaturated parts. The time dependence is assumed to be sinusoidal and phasor quantities are used in the solution. The method is applied to the calculation of smooth solid rotors manufactured of different materials. Six rotor materials are tested: three construction steels, pure iron, a cobaltiron alloy and an aluminium alloy. The results obtained by the method agree fairly well with the measurement quantities.

Tomografia computadorizada da coluna lombar após artrodese com emprego de material metálico: avaliação da qualidade da imagem para diferentes algoritmos matemáticos

OBJETIVO: Selecionar os melhores algoritmos para o exame de coluna lombar na avaliação de artrodese com material metálico. MATERIAIS E MÉTODOS: Utilizou-se um equipamento de tomografia computadorizada de 16 fileiras de detectores. Imagens de dez pacientes foram reconstruídas com filtros 20, 40, 60 e 80 e realizadas reformatações em três dimensões e multiplanares com espessuras de 2 mm e 4 mm. Um total de 320 imagens foi avaliado por três experientes radiologistas, que deram notas de 1 a 5 (1 = não-aceitável; 2 = abaixo dos padrões; 3 = aceitável; 4 = acima da média; 5 = excelente). Além disso, foram realizadas medidas de ruído para correlação com o tipo de filtro utilizado. RESULTADOS: As médias do valor de ruído para reconstrução com 2 mm e filtros 20, 40, 60 e 80 foram de 24,7 ± 4,3; 35,5 ± 4,2; 106,0 ± 18,5 e 145,9 ± 26,9, respectivamente, e para 4 mm foram de 18,1 ± 2,4; 25,1 ± 4,6; 76,7 ± 17,2 e 106,6 ± 23,4. CONCLUSÃO: As imagens coloridas em três dimensões são mais bem visualizadas com filtro 20, entretanto, nas imagens em tons de cinza um filtro intermediário de 40 ou 60 pode ser útil para demonstrar os parafusos com maior detalhe. Para reconstruções multiplanares com espessura de 2 mm o filtro 40 é mais bem aceito, e para uma espessura de 4 mm um filtro 60 apresentou melhor qualidade.

Disseny de les llantes en material compòsit de les rodes davanteres i roda posterior del vehicle de baix consum "Àguila"

Durant els últims dos anys un grup d’estudiants de l’Escola Politècnica Superior de laUniversitat de Girona han construït i evolucionat un prototip per competir en la Shell EcoMarathon, una cursa de caràcter internacional que es celebra cada any a Nogaro (França) ia on l’objectiu primordial és aconseguir el mínim consum. Equips de diferents països delmón recorren amb els seus prototips la mateixa distància i el guanyador és qui en finalitzarhagi fet servir menys quantitat de combustible. La intenció de l’equip és continuar competint en aquest cursa durant els propers anys, peraquest motiu cada any es plantegen noves modificacions a realitzar per tal d’aconseguir unprototip més competitiu. Una de les modificacions consisteix en substituir les actuals llantesd’alumini equipades en el vehicle per unes llantes lenticulars fabricades en fibra de carboni.Aquestes llantes en material compòsit representen una millora en prestacions respecte lesllantes convencionals en reduir la inèrcia.Escollir la fibra de carboni com el material a emprar no ha estat a l’atzar. Els avantatges quecomporta la fibra de carboni en referència als rati rigidesa/pes i resistència/pes sónindiscutibles. La resistència a la fatiga d’aquest tipus de material és més elevada que la del’alumini, material utilitzat en les actuals llantes, a més, la voluntat d’entendre millor elcomportament i els processos de fabricació d’aquest material per part dels membres del’equip posicionen a la fibra de carboni com el material més idoni.La solució final adoptada pel disseny de les llantes consta per la unió adhesiva de duespeces iguals fabricades en fibra de carboni. La facilitat de poder fabricar dos “plats” simètricsresulta el punt fort d’aquest disseny, el qual, amb un únic motllo s’arriben a construir latotalitat de les llantes

Desarrollo de la materia Proyectos. Grado de Comunicación Audiovisual. Universitat de Barcelona

El objetivo del presente trabajo es presentar la propuesta de desarrollo de la materia Proyectos del Grado de Comunicación Audiovisual de la Universidad de Barcelona, que incluye las asignaturas Proyectos I y Proyectos II. Ambas asignaturas son especialmente idóneas para trabajar las competencias transversales del grado, dado que el objetivo de la materia a la que pertenecen es integrar las competencias adquiridas en el conjunto de asignaturas cursadas por los alumnos hasta este momento, poniendo en relación los diferente lenguajes (escrito, oral, audiovisual y multimedia). Todo esto permite que el estudiante adquiera una visión integral y transversal. El presente trabajo reflexiona sobre los mecanismos que permitan al profesorado diseñar de forma colaborativa pautas y estrategias de enseñanza-aprendizaje; los modos de evaluación de las competencias de estas asignaturas, y todos aquellos aspectos claves que deben recoger los planes docentes. Materias como la de Proyectos suponen un reto en la actividad docente, al requerir del trabajo interdisciplinar e integrador de las áreas de conocimiento implicadas y de los docentes vinculados, al tiempo que facilitan la generación de puentes entre el ámbito académico y profesional.

Cultura material i formes de vida a la Barcelona de mitjan segle XVII (1655-1660) : Les llars de taverners i hostalers a través dels inventaris dels seus béns

L'estudi dels inventaris postmortem ens ha permès apropar-nos a la quotidianitat de taverners i hostalers que visqueren durant el segle XVII a la ciutat de Barcelona. Aquest tipus de document notarial ens deixa, entre d'altres, testimoni de la cultura material; els objectes, estris, mobles, robes... que ens poden ajudar a entendre diferents usos i costums, així com altres aspectes relacionats amb les mentalitats.

Fiber-reinforced Composite as Oral Implant Material. Experimental studies of glass fiber and bioactive glass in vitro and in vivo

Fiber-reinforced composite as oral implant material: Experimental studies of glass fiber and bioactive glass in vitro and in vivo Department of Prosthetic Dentistry and Biomaterials Science, Institute of Dentistry, University of Turku, Turku, Finland 2008. Biocompatibility and mechanical properties are important variables that need to be determined when new materials are considered for medical implants. Special emphasis was placed on these characteristics in the present work, which aimed to investigate the potential of fiber-reinforced composite (FRC) material as an oral implant. Furthermore, the purpose of this study was to explore the effect of bioactive glass (BAG) on osseointegration of FRC implants. The biocompatibility and mechanical properties of FRC implants were studied both in vitro and in vivo. The mechanical properties of the bulk FRC implant were tested with a cantilever bending test, torsional test and push-out test. The biocompatibility was first evaluated with osteoblast cells cultured on FRC substrates. Bone bonding was determined with the mechanical push-out test and histological as well as histomorplanimetric evaluation. Implant surface was characterized with SEM and EDS analysis. The results of these studies showed that FRC implants can withstand the static load values comparably to titanium. Threaded FRC implants had significantly higher push-out strength than the threaded titanium implants. Cell culture study revealed no cytotoxic effect of FRC materials on the osteoblast-like-cells. Addition of BAG particles enhanced cell proliferation and mineralization of the FRC substrates The in vivo study showed that FRC implants can withstand static loading until failure without fracture. The results also suggest that the FRC implant is biocompatible in bone. The biological behavior of FRC was comparable to that of titanium after 4 and 12 weeks of implantation. Furthermore, addition of BAG to FRC implant increases peri-implant osteogenesis and bone maturation.

Aggregate material formulated with MSWI bottom ash and APC fly ash for use as secondary building material

The main goal of this paper is to obtain a granular material formulated with Municipal Solid Waste Incinerarion (MSWI) bottom ash (BA) and air pollution control (APC) ash to be used as secondary building material. Previously, an optimum concrete mixture using both MSWI residues as aggregates was formulated. A compromise between the environmental behaviour and the economy of the process was considered. Unconfined compressive strength and abrasion resistance values were measured in order to evaluate the mechanical properties. From these results, the granular mixture was not suited for certain applications owing to the high BA/APC content and low cement percentages used to reduce the costs of the final product. Nevertheless, the leaching test performed showed that the concentrations of all heavy metals were below the limits established by the current Catalan legislation for their reutilization. Therefore, the material studied might be mainly used in embankments, where high mechanical properties are not needed and environmental safety is assured.

Reconstrucción y activación del patrimonio artístico con tecnología audiovisual. Experiencia de Taüll 1123

With the aim of preserving artistic heritage, museums have typically removed paintings and furniture from the places they were created for. Over the decades, the curators of these places have begun to request that these artistic works be returned, conscious of the significance that many of these works now have. Some institutions and museums have responded to these requests by providing copies of the original works. Although traditionally these copies were handmade, digital resources, such as audiovisual technology, are now being used. The Taüll 1123 project (Lleida, Spain) is an example of the use of these new tools for the benefit of artistic heritage and of modern visitors.

Pulmonary 64-MDCT angiography with 50 mL of iodinated contrast material in an unselected patient population: a feasible protocol

Abstract Objective: To propose a protocol for pulmonary angiography using 64-slice multidetector computed tomography (64-MDCT) with 50 mL of iodinated contrast material, in an unselected patient population, as well as to evaluate vascular enhancement and image quality. Materials and Methods: We evaluated 29 patients (22-86 years of age). The body mass index ranged from 19.0 kg/m2 to 41.8 kg/m2. Patients underwent pulmonary CT angiography in a 64-MDCT scanner, receiving 50 mL of iodinated contrast material via venous access at a rate of 4.5 mL/s. Bolus tracking was applied in the superior vena cava. Two experienced radiologists assessed image quality and vascular enhancement. Results: The mean density was 382 Hounsfield units (HU) for the pulmonary trunk; 379 and 377 HU for the right and left main pulmonary arteries, respectively; and 346 and 364 HU for the right and left inferior pulmonary arteries, respectively. In all patients, subsegmental arteries were analyzed. There were streak artifacts from contrast material in the superior vena cava in all patients. However, those artifacts did not impair the image analysis. Conclusion: Our findings suggest that pulmonary angiography using 64-MDCT with 50 mL of iodinated contrast can produce high quality images in unselected patient populations.

Proposta de seqüenciació didàctica en relació a les aportacions de l’àrea d’educació física a la competència comunicativa lingüística i audiovisual

El present article recull reflexions i propostes sobre les aportacions que ofereix l’àrea d’educació física aldesenvolupament de la competència comunicativa, amb l’objectiu de col·laborar activament a millorar-la. Desd’aquest compromís, en primer lloc, s’indiquen les capacitats relacionades amb la competència comunicativai, posteriorment, es relacionen aquestes capacitats des de l’especificitat de les situacions d’aprenentatge queaporta l’àrea d’educació física

Determinação dos hidrocarbonetos saturados e policíclicos aromáticos presentes no material particulado da atmosfera amazônica

It was identified and quantified several organic compounds in the atmosphere of a site into Amazon Basin with high impact of biomass burning emission. It was important to know the particulate matter composition with respect to n-alkanes and PAH associated with the particulate matter because they provided indication on the main sources contributing to airborne particles, the contribution of natural vs. man-made emission and the aging of the particles. The main classes of compounds observed were n-alkanes, PAH and nitro-PAH. It was observed the formation of nitro-PAH from photochemical reactions. The aerosol mass concentration is mainly associated with fluoranthene, pyrene and benzo(ghi)perylene. Environmental and direct emissions samples (flaming and smoldering) were collected and analysed.

Yliopistojen verkko-oppimisympäristöissä jaeltavan materiaalin tekijänoikeuskysymykset

Tutkimuksen tavoitteena on selvittää yliopistojen verkko-oppimisympäristöjen ja tekijänoikeuden välisen suhteen perusta siitä näkökulmasta, kuka omistaa oikeudet yliopistojen perusopetuksessa verkko-oppimisympäristöihin tuotettavaan tekijänoikeuden alaiseen materiaaliin. Työssä on keskitetty audiovisuaalisen oppimateriaalin erityispiirteisiin. Tutkimuksen säädöspohja koostuu pääasiassa tekijänoikeusneuvoston lausunnoista. Lisäksi tarkastelun pohjana on käytetty oikeuskirjallisuutta. Tekijänoikeuksista sopiminen on tapa, jolla korkeakoulujen toiminnan perusperiaatteet käytännössä turvataan tai sivuutetaan. Sopimiseen voidaan käyttää olemassa olevia sopimusmalleja tai avoimia lisenssejä. Verkko-oppimisympäristöt ja audiovisuaaliset oppimateriaalit tulevat vahvistamaan asemaansa tulevaisuudessa. Täsmentämällä kenellä on tekijänoikeudet opetuksessa käytettävään aineistoon, miten oikeudet vaikuttavat ja miten aineistoa näiden oikeuksien valossa voidaan konkreettisesti käyttää, pystyvät yliopistot varautumaan tulevaisuuden haasteisiin tekijänoikeuskysymysten hallinnassa

Influência do material do alambique na composição química das aguardentes de cana-de-açúcar

This paper describes variations in the profile of the main volatile organic compounds present in Brazilian sugar cane spirits distilled in copper and stainless steel distillers. The main organic compounds: aldehydes, ketones, carboxylic acids, alcohols and esters, were determined through High Performance Liquid Chromatography (HPLC) and High Resolution Gas Cromatography (HRGC). The spirits produced in copper distillers exhibit higher contents of aldehydes with respect to the ones produced in stainless steel. The inverse is true with respect to the higher alcohol and ester contents. No significant variation has been observed for the carboxylic acids.