A high efficiency microturbine concept

There is a growing trend towards decentralized electricity and heat production throughout the world. Reciprocating engines and gas turbines have an essential role in the global decentralized energy markets and any improvement in their electrical efficiency has a significant impact from the environmental and economic viewpoints. This paper introduces an inter-cooled and recuperated two-shaft microturbine at 500 kW electric output range. The microturbine is optimized for a realistic combination of the turbine inlet temperature, the recuperation rate and the pressure ratio. The new microturbine design aims to achieve significantly increased performance within the range of microturbines and even competing with the efficiencies achieved in large industrial gas turbines. The simulated electrical efficiency is 45%. Improving the efficiency of combined heat and power (CHP) systems will significantly decrease the emissions and operating costs of decentralized heat and electricity production. Cost-effective, compact and environmentally friendly micro-and small-scale CHP turbine systems with high electrical efficiency will have an opportunity to successfully compete against reciprocating engines, which today are used in heat and power generation all over the world and manufactured in large production series. This paper presents a small-scale gas turbine process, capable of competing with reciprocating engine in terms of electrical efficiency.

Valmistusstrategian muodostaminen uudelle tuoteperheelle

Diplomityön tavoitteena on tutkia valmistusstrategian muodostamista rajaten tarkastelu yhteen tuoteperheeseen. Työn teoriaosuudessa suoritaan kirjallisuuskatsaus, jonka keskeisempänä tuloksena luodaan teoriaviitekehys valmistusstrategian muodostamisesta. Valmistusstrategian osa-alueiksi rajataan toimitusketjun rakenne, tuotantomuodon valinta, kapasiteetin suunnittelu sekä materiaalinohjaus. Työn soveltavassa osuudessa muodostetaan esitetyn teoriaviitekehyksen avulla valmistusstrategiaehdotelma Case – yrityksen uudelle tuoteperheelle. Valmistusstrategian tavoitteet sekä rajoitteet tunnistetaan tarkastelemalla yrityksen ylemmän tason strategioita, markkinavaatimuksia, valmistuksen resursseja sekä päivittäistä toimintaa. Kokonaisuudessaan diplomityö käsittelee valmistusstrategian muodostamista aikaisempaa kirjallisuutta yksityiskohtaisemmin ja käytännönläheisemmästä näkökulmasta. Case – yrityksen uudelle tuoteperheelle ehdotettu valmistusstrategia todetaan seuraavan yleisesti hyviä toimitusketjun johtamisen periaatteita.

PRODUCT DATA MANAGEMENT FOR FINNISH SMALL AND MEDIUM-SIZED MANUFACTURING ENTERPRISES - Towards a viable information system concept

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

Hikari ja lintsari ysiluokkalaisina

Kirjallisuusarvostelu