Performance assessment of a vertical axis turbine in a marine current flume tank and CFD modelling

As advances in numerical modelling techniques support the increased confidence in predictions from computer simulations, the need remains to have experimental verification built into the design process. This paper outlines the experimental investigation carried out on a shielded vertical axis turbine in a marine environment. The experiments consist of performance measurements and the use of particle image velocimetry on a small scale device in a marine current flume. The results demonstrate that the performance of the device can be modelled numerically; in particular, the results show that the numerical model used can correctly predict the increase in performance with Reynolds number.

Assessment of faculty training program for the use of e-learning platforms: analysis of current use

5th International Conference on Education and New Learning Technologies (Barcelona, Spain. 1-3 July, 2013)

Exposure and risk assessment in occupational exposure to fungi: aspects to consider in highly contaminated settings

Although a clear correlation between levels of fungi in the air and health impacts has not been shown in epidemiological studies, fungi must be regarded as potential occupational health hazards. Fungi can have an impact on human health in four different ways: (1) they can infect humans, (2) they may act as allergens, (3) they can be toxigenic, or (4) they may cause inflammatory reactions. Fungi of concern in occupational hygiene are mostly non-pathogenic or facultative pathogenic (opportunistic) species, but are relevant as allergens and mycotoxins producers. It is known that the exclusive use of conventional methods for fungal quantification (fungal culture) may underestimate the results due to different reasons. The incubation temperature chosen will not be the most suitable for every fungal species, resulting in the inhibition of some species and the favouring of others. Differences in fungi growth rates may also result in data underestimation, since the fungal species with higher growth rates may inhibit others species’ growth. Finally, underestimated data can result from non-viable fungal particles that may have been collected or fungal species that do not grow in the culture media used, although these species may have clinical relevance in the context. Due to these constraints occupational exposure assessment, in setings with high fungal contamination levels, should follow these steps: Apply conventional methods to obtain fungal load information (air and surfaces) regarding the most critical scenario previously selected; Guideline comparation aplying or legal requirements or suggested limits by scientific and/or technical organizations. We should also compare our results with others from the same setting (if there is any); Select the most suitable indicators for each setting and apply conventional-culture methods and also molecular tools. These methodology will ensure a more real characterization of fungal burden in each setting and, consequently, permits to identify further measures regarding assessment of fungal metabolites, and also a more adequate workers health surveillance. The methodology applied to characterize fungal burden in several occupational environments, focused in Aspergillus spp. prevalence, will be present and discussed.

Fungi spores dimension matters in health effects: a methodology for more detail fungi exposure assessment

Health effects resulting from dust inhalation in occupational environments may be more strongly associated with specific microbial components, such as fungi, than to the particles. The aim of the present study is to characterize the occupational exposure to the fungal burden in four different occupational settings (two feed industries, one poultry and one waste sorting industry), presenting results from two air sampling methods – the impinger collector and the use of filters. In addition, the equipment used for the filter sampling method allowed a more accurate characterization regarding the dimension of the collected fungal particles (less than 2.5 μm size). Air samples of 300L were collected using the impinger Coriolis μ air sampler. Simultaneously, the aerosol monitor (DustTrak II model 8532, TSI®) allowed assessing viable microbiological material below the 2.5 μm size. After sampling, filters were immersed in 300 mL of sterilized distilled water and agitated for 30 min at 100 rpm. 150 μl from the sterilized distilled water were subsequently spread onto malt extract agar (2%) with chloramphenicol (0.05 g/L). All plates were incubated at 27.5 ºC during 5–7 days. With the impinger method, the fungal load ranged from 0 to 413 CFU.m-3 and with the filter method, ranged from 0 to 64 CFU.m-3. In one feed industry, Penicillium genus was the most frequently found genus (66.7%) using the impinger method and three more fungi species/genera/complex were found. The filter assay allowed the detection of only two species/genera/complex in the same industry. In the other feed industry, Cladosporium sp. was the most found (33.3%) with impinger method and three more species/genera/complex were also found. Through the filter assay four fungi species/genera/complex were found. In the assessed poultry, Rhyzopus sp. was the most frequently detected (61.2%) and more three species/genera/complex were isolated. Through the filter assay, only two fungal species/genera/complex were found. In the waste sorting industry Penicillium sp. was the most prevalent (73.6%) with the impinger method, being isolated two more different fungi species/genera/complex. Through the filter assay only Penicillium sp. was found. A more precise determination of occupational fungal exposure was ensured, since it was possible to obtain information regarding not only the characterization of fungal contamination (impinger method), but also the size of dust particles, and viable fungal particles, that can reach the worker ́s respiratory tract (filters method). Both methods should be used in parallel to enrich discussion regarding potential health effects of occupational exposure to fungi.

Occupational exposure to mycotoxins: aspects to consider for the aggregate and cumulative risk assessment

Mycotoxins are an important group of naturally occurring substances known to contaminate a huge variety of agricultural products, feed and food commodities. The main concern is their widespread presence and toxic effects on humans and animals as they have been described as cytotoxic, nephrotoxic, hepatotoxic, teratogenic, immunosuppressive, mutagenic and/or carcinogenic. However, until now, risk assessments and regulations have usually been performed on individual mycotoxins despite humans and animals are being frequently exposed to a multitude of mycotoxins simultaneously. Moreover, even though some exposures through inhalation and dermal contact may potentially occur, only oral ingestion has been considered as the sole route of exposure in all the evaluations. However, more recent studies have also demonstrated airborne exposure to mycotoxins in different occupational settings with emphasis on agricultural professions. In these cases, skin contact with mold-infested substrates and inhalation of spore-borne toxins are the most important sources of exposure. Still, mycotoxins are not normally recongnize as na occupational hazard and exposure is different from the one ocurring by food intake. In this case, exposure is charaterized to be acute and simultaneous to other mycotoxins and also to fungi and dust. All these features increase the challenge implicated in the risk assessment process. Some topics will be presented and discussed in detailed such as: What occupational settings should be consider in this case; possible exposure routes; exposure characterization; how to assess exposure; co-exposure; aggregate exposure and cumulative risk assessment.

An assessment of data leakage in Firefox under different conditions.

Data leakage is a serious issue and can result in the loss of sensitive data, compromising user accounts and details, potentially affecting millions of internet users. This paper contributes to research in online security and reducing personal footprint by evaluating the levels of privacy provided by the Firefox browser. The aim of identifying conditions that would minimize data leakage and maximize data privacy is addressed by assessing and comparing data leakage in the four possible browsing modes: normal and private modes using a browser installed on the host PC or using a portable browser from a connected USB device respectively. To provide a firm foundation for analysis, a series of carefully designed, pre-planned browsing sessions were repeated in each of the various modes of Firefox. This included low RAM environments to determine any effects low RAM may have on browser data leakage. The results show that considerable data leakage may occur within Firefox. In normal mode, all of the browsing information is stored within the Mozilla profile folder in Firefox-specific SQLite databases and sessionstore.js. While passwords were not stored as plain text, other confidential information such as credit card numbers could be recovered from the Form history under certain conditions. There is no difference when using a portable browser in normal mode, except that the Mozilla profile folder is located on the USB device rather than the host's hard disk. By comparison, private browsing reduces data leakage. Our findings confirm that no information is written to the Firefox-related locations on the hard disk or USB device during private browsing, implying that no deletion would be necessary and no remnants of data would be forensically recoverable from unallocated space. However, two aspects of data leakage occurred equally in all four browsing modes. Firstly, all of the browsing history was stored in the live RAM and was therefore accessible while the browser remained open. Secondly, in low RAM situations, the operating system caches out RAM to pagefile.sys on the host's hard disk. Irrespective of the browsing mode used, this may include Firefox history elements which can then remain forensically recoverable for considerable time.

The perceptions of postgraduate international students of examinations.

The increasing internationalisation of higher education means that many students in the UK are not native English speakers, possibly putting them at a disadvantage in an examination environment. However, exams continue to be used even though although they are often deprecated as an assessment instrument in postgraduate courses. This article explores the implications from these observations for module leaders and for higher education institutions. Three themes emerge: the impact of internationalisation, the use of exams at postgraduate level and the language and cultural issues faced by international students. A review of university policy and quality documents revealed a general commitment to internationalisation but some gaps in policy support, for students with English as a second or foreign language. A survey of students in two computing programmes evaluated these themes. The results did not show up any major issues, though there were a number of suggestions to improve the exam process to address feelings of bias to UK or native-English-speaking students. The research therefore established that the university’s internationalisation and diversity strategy is broadly reflected in students’ experiences, with the possible exception of students who were recruited with insufficient English to be able to engage successfully with the material. The contrast in responses when analysed by home country or English proficiency suggest that Learning, Teaching and Assessment (LTA) practice in this context should be clear whether and when language or culture are the main barrier to students. Pragmatic recommendations are made for improvement in examination practice, and to assessment processes generally in this context. Areas for further work are identified.

Integrated indicator framework and methodology for monitoring and assessment of hazardous substances and their effects in the marine environment

Many maritime countries in Europe have implemented marine environmental monitoring programmes which include the measurement of chemical contaminants and related biological effects. How best to integrate data obtained in these two types of monitoring into meaningful assessments has been the subject of recent efforts by the International Council for Exploration of the Sea (ICES) Expert Groups. Work within these groups has concentrated on defining a core set of chemical and biological endpoints that can be used across maritime areas, defining confounding factors, supporting parameters and protocols for measurement. The framework comprised markers for concentrations of, exposure to and effects from, contaminants. Most importantly, assessment criteria for biological effect measurements have been set and the framework suggests how these measurements can be used in an integrated manner alongside contaminant measurements in biota, sediments and potentially water. Output from this process resulted in OSPAR Commission (www.ospar.org) guidelines that were adopted in 2012 on a trial basis for a period of 3 years. The developed assessment framework can furthermore provide a suitable approach for the assessment of Good Environmental Status (GES) for Descriptor 8 of the European Union (EU) Marine Strategy Framework Directive (MSFD).

The influence of surface and deep cues on primary and secondary school students’ assessment of relevance in Web menus

International audience

Spatial multicriteria decision analysis to potential beekeeping assessment. Case study: Montesinho Natural Park (Portugal)

The Multicriteria decision analysis is a tool to support decision-making in the identification of areas with the utmost beekeeping potential. This paper design a GIS multicriteria approach to assess the beekeeping potential. The development of a conceptual model structure requires the participation of stakeholders and experts in that process. The spatial Multicriteria Decision Analysis (MCDA) allowed defining the potential beekeeping map. The resulting maps can be used by the beekeepers associations to easily select the more suitable areas for the apiaries location or relocation and avoid prohibited areas by legal requirements.