Estudo do perfil térmico de fornos do tipo "caipira" utilizados pelo setor de cerâmica vermelha em parelhas na região Seridó-RN

The present study aimed to characterize the thermal profile of wood fired oven used by the red ceramic industry in Parelhas, in the Seridó region/RN, aiming to propose structural interventions that can contribute to increasing productivity and product quality, optimize wood consumption and mitigate existing losses during the burning process. The study was conducted at Cerâmica Esperança in the city of Parelhas -RN, Brazil, during the period from August 2012 to September 2013. Four treatments were performed with three replicates, ie, with, a total of 12 experimental units (burnings). In the first stage 4 treatments were performed with three replicates, totaling 12 experimental units (firings). In the second stage 2 treatments were performed with three replications, totaling 6 experimental units (firings). The physical characteristics of the wood were analyzed using standard NBR 11941 and NBR 7190 for basic density and moisture, respectively. The clay was used as a reference parameter for distinguishing treatments. For both the analysis and characterization was carried out using techniques of fluorescence X (XRF) rays, X-ray diffraction (XRD) analysis, particle size analysis (FA). In the first and second stages were monitored: the time during the firing process, the amount of wood used at each firing, the number of parts enfornadas for subsequent determination of the percentages of losses, but also product quality. To characterize the thermal profile of the oven, we measured the temperature at 15 points scored in the surface charge put into the oven. Measurements were taken every 30 minutes from preheat until the end of burning, using a pyrometer laser sight sighting from preheating until the end of burning. In the second step 12 metal cylinders distributed on the oven walls, and the cylinder end walls 8 of the furnace 2 and rollers on each side walls are installed equidistant to 17 cm from the soil and the surface 30 of the wall are installed. The cylinders distributed on the front were placed 50 cm above the furnace, and the base of the oven 20 cm distant from the ground. 10 also thermocouples were installed, and five thermocouples distributed 1.77 cm above the combustion chambers, and one thermocouple on each side, and three thermocouples in front of the oven. We carried out the measurements of the temperatures every 1 hour during the burning two hours in cooling the cylinders with a pyrometer and thermocouples for dattaloger. These were fixed with depth of 30 cm from the wall. After statistical analysis it was found that: the thermal profile of the furnace surface and at different heights was heterogeneous; and the ranges of density and moisture content of wood are within recommended for use as an energy source standards. We conclude that even at low temperatures reached during firing there was a significant production of good quality products, this is due to high concentrations of iron oxide and potassium oxide found in clay, which lowers the melting point of the piece. The average burn time for each step varied 650-2100 minutes wood consumption was on average 20 m3, product quality was on average 16% of first quality, 70% second, third and 5% to 10% loss . The distance between the wire and the surface of the oven was a significant parameter for all treatments, but with different variations, meaning that the wire should not be so generic and unique form, used as a criterion for completion of the burn process. The central part of the furnace was the area that reached higher temperature, and in a unified manner, with the highest concentration of top quality products. The ideal temperature curve, which provided the highest quality of ceramic products was achieved in the central part of the furnace

Calçadas invisíveis: aspectos do passeio público, em Natal-RN, como projeção de uma cidadania ausente

This study has as a goal to establish a relationship between public sidewalk characteristics of Lagoa Nova District (neighborhood), in Natal and the kind of citizens whose constructions and maintenance layouts reflects. It‟s understood here as public sidewalk, specifically, the place reserved for passers-by traffic, located between public lots and vehicles pavements. It‟s a concern to make a brief survey about the occupation of this particular region and a detailed description over physical characteristic of its sidewalks that shows several obstacles for passers-by accessibility, trying to find possible factors that explain the problematic format , once, at the first sight, most of accessibility of passers-by is compromised. It‟ also, searched, local population thoughts regarding occupation notions about this environment, just like as cultural, political and economical aspects that might influence upon snatching these hybrid places located between private and public border line. It‟s confirmed that the nowadays sidewalks‟ shapes is not only citizenship reflection or a lack of it but shows it as an active agent related with the construction of this set of fundamental rights and duties vital for harmonical co-living local citizens

Produtividade e qualidade dos frutos da laranjeira 'Pêra' clone IAC em 16 porta-enxertos na região de Bebedouro-SP

Avaliou-se a influência de 16 porta-enxertos na produtividade, nas características físicas e químicas (sólidos solúveis totais-°Brix; acidez; ratio; porcentagem de suco; índice tecnológico e tamanho dos frutos) dos frutos da laranjeira 'Pêra' [Citrus sinensis (L.) Osbeck] e na incidência e severidade da clorose variegada dos citros (CVC). O plantio do experimento foi realizado em julho de 1993, com espaçamento de 6,0 m entre linhas e 3,5 m entre plantas (476 plantas/ha). O experimento foi conduzido sem irrigação. O delineamento experimental foi em blocos ao acaso, duas plantas por parcela, três repetições e 16 tratamentos, constituídos pelas seguintes cultivares porta-enxertos: tangerineira 'Sun Chu Sha Kat' (Citrus reticulata Blanco), tangerineira 'Pectinífera' (C. reticulata), 'Shekwasha' (C. depressa Hayata), tangerineira 'Pectinífera/Shekwasha' (C. depressa Hayata), tangerineira 'Batangas' (C. reticulata), tangerineira 'Oneco' (C. reticulata), citrangor [citrange (Poncirus trifoliata Raf. x C. sinensis) x C. sinensis], citrandarin [C.sunki hort. Ex Tanaka) x Poncirus trifoliata (L.) Raf. cv. English, tangerineira 'Sunki' (C. sunki), tangerineira 'Suen-Kat' (C. sunki), tangerineira 'Nasnaran' (C. amblycarpa Ochse), tangerineira 'Venezuela' (C. reticulata), tangerineira Heen Naran (C. lycopersicaeformis hort. ex Tan. ), limoeiro 'Cravo' (C. limonia Osbeck) x tangerineira 'Cleópatra' (C. reshni hort ex Tanaka), limoeiro 'Cravo' (C. limonia), tangerineira 'Cleópatra' (C. reshni). A intensidade da clorose variegada dos citros variou em função dos porta-enxertos e não se relacionou com a produção de frutos até a quarta safra. Os porta-enxertos estudados, com exceção da tangerineira Nasnaran, proporcionaram qualidade e produções iniciais de frutos similares aos do limoeiro 'Cravo'.

Das tendas às telhas: a educação escolar das crianças ciganas da praça Calon-Florânia/RN

El presente trabajo es el resultado de una investigación llevada a cabo con un grupo de etnia romaní Calon, en el territorio de Seridó, específicamente la ciudad de Florânia, estado do Rio Grande do Norte / RN, como un lugar con la Escola Municipal de Domingas Francelina das Neves . El grupo se trasladó a las pruebas de un nuevo espacio en la ciudad en los principios de l980, la construcción de casas para vivir de esta manera y fundar una escuela para sus hijos, desde el consumo de una cultura diferente a la manera de vivir y estar en el mundo, si los usuarios que hacen de las políticas públicas establecidas grupos sociales. Hemos elegido como base para el análisis de la importancia teórica y metodológica de la Escuela de Cultura Cultura Historia, conceptos y prácticas, estrategias y tácticas (Michel de Certeau), la entrevista completa (Kaufmann) y la memoria (Le Goff). Como una estrategia en la investigación de campo, se utiliza la técnica de observación participante (Minayo). En este trabajo, encontramos el ejercicio de la educación para la vida familiar, la práctica social y cultural de los gitanos, el trabajo de la institución de educación y los elementos postulada por los teóricos que abordan los cambios en los estilos de vida de la inclusión en la escuela, las culturas silenciadas o negada. La investigación representa una labor de diálogo intercultural en una investigación como resultado de intensas búsquedas en fuentes documentales y de archivo, después de haber sido un cuerpo empírico, con material de lectura en los archivos públicos de la Cidade de Florânia, Escola Municipal de archivo Domingas Francelina das Neves entrevistas, fotografías, películas, cuadernos, documentos personales y diarios de circulación nacional. Nuestra investigación tuvo como resultado en los estudios de la cultura escolar y la escuela, el lugar de la escuela como un instrumento de inclusión social de grupos marginados y los grupos étnicos, sin poder, los estudios para la comprensión de la convivencia con los distintos temas de la diversidad, así como la comprensión y posibilidades de la formulación de declaraciones de política, teniendo como punto de partida las prácticas sociales y culturales de la rutina escolar

Emergência e crescimento inicial de plântulas de Archontophoenix cunninghamiana H. Wendl. & Drude provenientes de sementes de diferentes plantas matrizes

A diversidade genética é um fator fundamental nos programas de melhoramento e seleção de plantas, dessa forma, o objetivo no trabalho foi avaliar genótipos de Archontophoenix cunninghamiana quanto à emergência e crescimento inicial das plântulas, no sentido de orientar a seleção de plantas matrizes. Os frutos maduros foram colhidos em dez plantas matrizes em Monte Alegre do Sul - SP, nos quais se avaliaram o peso e as dimensões e, nas sementes, também o peso e as dimensões, além do teor de água, emergência, índice de velocidade de emergência, diâmetro e comprimento da parte aérea e massa seca de plântulas. O delineamento utilizado foi o inteiramente casualizado e a comparação entre médias foi realizada pelo teste de Tukey (P<0,05). Entre as sementes das matrizes, há diferenças nas características físicas e fisiológicas, o que possibilita a identificação e seleção de matrizes produtoras de sementes de qualidade superior.

Consorciação e plantas daninhas afetando a produtividade e a qualidade de sementes de sorgo

This research aimed to study competition effects of legumes intercropping and weeds on seeds yield and quality of Sorghum bicolor (L.) Moench. The experiment was carried out in a Rhodic Nitisol, under field condition in Botucatu region, São Paulo State, Brazil. Ten treatments were tested: sorghum (cv. A-6304) intercropped with Dolichos lablab L., Mucuna aterrima (Piper et Tracy) Holland, Canavalia ensiformis D. C. or Crotalaria juncea L., that were sown in the same time of sorghum or 20 days after the sorghum sowing, and sorghum weed-free and sorghum without weeding. The experimental design employed was the completely randomized blocks with four replications. There were evaluated sorghum seeds yield and some characteristcs of seed quality: purity, hectolitric weight, 1000 seeds weight, insect infestation, germination and vigor (by first counting of germination test and accelerated ageing test). The competition caused by legumes intercropping and weeds affected the yield and the physical and physiological characteristics of sorghum seeds, but the intensity of prejudicial effects depended on the time and the species of legume intercropping.

Caracterização biométrica de frutos de coqueiro, Vocos nucifera L. variedade anã-verde, em diferentes estádios de desenvolvimento

Objetivou-se determinar a curva de crescimento da massa do fruto e diâmetros externos longitudinal e transversal, bem como os acúmulos do albúmen sólido (polpa) e albúmen líquido (água-de-coco) e sua caracterização sensorial em diferentes estádios. Frutos de coqueiro-anão-verde (Cocos nucifera L.) foram avaliados em 26 épocas, durante o período de sua formação, em intervalos quinzenais, de abril de 2004 a maio de 2005, no município de Bebedouro - SP. Foram aplicados aos dados modelos de regressão logística e logística combinada com exponencial quadrática, obtendo-se elevados graus de ajustes. O diâmetro externo longitudinal alcançou a média máxima de 20,12 cm aos 375 dias após a abertura da inflorescência (d.a.a.i.), enquanto o diâmetro externo transversal alcançou 14,57 cm, aos 345 (d.a.a.i.). Os frutos apresentaram maior massa no período entre 255 e 315 (d.a.a.i.), não havendo diferença estatística significativa neste período. O albúmen sólido teve início de formação aos 225 (d.a.a.i.), chegando aos 375 dias com a massa média de 214,78 gramas. O maior volume médio de albúmen líquido foi verificado em frutos com 8,5 meses de idade com adequado sabor. Esses dados são importantes indicativos do ponto ideal de colheita dos frutos de coqueiro-anão-verde, na região de Bebedouro - SP, para o consumo in natura da água-de-coco.

Desenvolvimento de frutos de Longan (Dimocarpus longan lour) na região de Jaboticabal-SP

O presente estudo teve por objetivo avaliar o desenvolvimento de frutos de plantas de longan (Dimocarpus longan Lour) na região de Jaboticabal, estabelecendo-se, portanto, a curva de crescimento dos frutos. As avaliações realizadas foram semanais, consistindo em medições do diâmetro longitudinal e transversal dos frutos marcados, a partir do momento da formação da polpa. Quinzenalmente, realizaram-se avaliações de características físicas: massa de fruto (g), casca (g), polpa (g) semente (g), e químicas: acidez titulável (AT), sólidos solúveis (SS), ácido ascórbico (AA) e ratio (SS/AT). Com os resultados obtidos, pode-se concluir que o ciclo de frutificação da Longan na região é entre 120 e 130 dias após antese, período em que o fruto estaria apto para o consumo. A curva do desenvolvimento dos frutos segue um padrão sigmoidal simples. Com relação aos atributos físicos e químicos, constatou-se que a planta 6 apresentou os melhores resultados, podendo ser recomendada como planta-matriz.

Qualidade de frutos de pitaya em função da época de polinização, da fonte de pólen e da coloração da cobertura

A pitaya (Hylocereus undatus) é uma cactácea propagada vegetativamente, o que resulta em pequena ou nula variabilidade nos plantios comerciais. Devido a diversos estudos mostrarem que a espécie é auto ou parcialmente incompatível, realizou-se este trabalho com o intuito de verificar a eficiência de polinização da pitaya autofecundada e utilizando-se de pólen de H. polyrhizus e Selenicereus setaceus, além da influência da época do ano e da coloração da cobertura da tela plástica na qualidade dos frutos. O experimento foi realizado na Área de Fruticultura da Faculdade de Ciências Agrárias e Veterinárias - UNESP, Campus de Jaboticabal, num delineamento experimental inteiramente casualizado, em esquema fatorial 3 X 2 X 2 (três espécies doadoras de pólen X duas colorações de cobertura de sombrite, branca e preta, com 50% de sombreamento X duas épocas do ano), com quatro repetições para cada espécie doadora de pólen, em cada uma das coberturas. As flores foram emasculadas em duas épocas (março e abril) e polinizadas manualmente. As variáveis avaliadas foram porcentagem de pegamento dos frutos, características físicas e químicas dos frutos (comprimento e diâmetro, massas total, de polpa e de casca, % de polpa, espessura da casca, pH, teor de sólidos solúveis (ºBrix), teor de vitamina C, acidez titulável, índice de maturação - ST/AT) e dias da antese até a colheita. Não houve frutificação nas flores autopolinizadas, enquanto as polinizadas com pólen de H. polyrhizus e S. setaceus obtiveram 100% de pegamento. Pode-se concluir que há necessidade de interplantio de plantas de H. undatus (clone avaliado) com H. polyrhizus ou S. setaceus para a ocorrência de frutificação, sendo que a utilização de H. polyrhizus como doadora de pólen proporciona a obtenção de frutos com maior massa e menor acidez. As condições climáticas ocorridas durante o desenvolvimento dos frutos, nas épocas estudadas, afetaram a qualidade dos frutos.

Eficiência relativa de diferentes frações granulometricas de calcários na neutralização da acidez dos solos, avaliada em laboratório

As frações granulométricas retidas nas peneiras n°s (ABNT) 5-10, 10-30, 30-50, e 50-60 de quatro calcários, sendo dois sedimentares e dois metamórficos, foram incubadas durante 160 dias com três tipos de solos, em condições de laboratório. A eficiência das frações na neutralização da acidez dos solos foi avaliada pela variação do pH. Os resultados permitiram concluir que a referida eficiência independe da natureza geológica do calcário mas depende do tipo de solo, sendo decrescente na seguinte ordem: LVd, LEd e LEm. Apesar da legislação atual normatizar as características físicas dos calcários, bem como os seus graus de eficiência, a presente pesquisa sugere novos valores para a eficiência relativa das diferentes frações granulometricas de calcários: fração maior do que 10:0%, de 30:35%; de 30-50:75% e menor que 50:100%.

Effects of different sampling intervals on apparent protein and energy digestibility of common feed ingredients by juvenile oscar fish (Astronotus ocellatus)

O presente estudo avaliou a digestibilidade aparente da proteína e da energia de ingredientes (farelo de soja, farinha de peixe, farelo de trigo e milho) por juvenis de apaiari (Astronotus ocellatus) usando dois diferentes intervalos de coleta (30 min. e 12h). Os 160 juvenis de apaiari utilizados (22,37 ± 3,06 g de peso corporal) foram divididos em quatro tanques rede plásticos e cilíndricos, cada um colocado em um tanque de alimentação de 1.000 L. O experimento foi inteiramente casualizado em esquema fatorial 2 x 4 (2 intervalos de coleta de fezes e 4 ingredientes foram) com quatro repetições. Os testes estatísticos não detectaram efeito da interação entre o intervalo de coleta e tipo de ingrediente nos coeficientes de digestibilidade. O intervalo de coleta não afetou a digestibilidade da proteína e da energia. As características físicas das fezes dos juvenis de apaiari aparentemente as tornam menos sensíveis à perda de nutrientes por lixiviação, permitindo intervalos de coleta maiores. A digestibilidade da proteína dos ingredientes avaliados foi semelhante, mostrando que a digestibilidade aparente de ingredientes animais e vegetais por juvenis de apaiari é eficiente. Os coeficientes de digestibilidade da energia foram maiores para a farinha de peixe e o farelo de soja comparado a farelo de trigo e milho. Ingredientes ricos em carboidratos (farelo de trigo e milho) apresentaram os piores coeficientes de digestibilidade da energia e, portanto, não são usados eficientemente pelos juvenis de apaiari.

Qualidade da carne de fêmeas suínas alimentadas com diferentes concentrações de ractopamina na dieta

Analisaram-se as qualidades física, química e sensorial, bem como o perfil de ácidos graxos da carne de fêmeas suínas alimentadas com dietas com concentrações crescentes de ractopamina. Foram utilizadas 468 fêmeas, com peso inicial de 84,77±7,20kg, alojadas em 36 baias e alimentadas com dietas contendo 0, 5, 10 ou 15mg de ractopamina/kg. Após o período de 28 dias, dois animais de cada baia, depois de passarem por 15 horas de jejum sólido, foram abatidos. Uma amostra do músculo Longissimus da meia carcaça direita foi colhida para se avaliar as características de qualidade da carne. Não houve efeito (P>0,05) da adição de ractopamina às dietas sobre o pH, capacidade de retenção de água, força de cisalhamento, cor e oxidação lipídica da carne. Observou-se efeito quadrático (P<0,05) para perdas por cocção da carne, e não foi observada diferença (P>0,05) na análise sensorial da carne. Também não foi observado efeito (P>0,05) sobre a composição em ácidos graxos e sobre a relação entre ácidos graxos saturados:insaturados. A adição de até 15mg de ractopamina/kg de dieta não altera as características físicas, sensoriais e o perfil de ácidos graxos da carne de fêmeas suínas abatidas com 110kg de peso.

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Identificação fuzzy-multimodelos para sistemas não lineares

This paper presents a new multi-model technique of dentification in ANFIS for nonlinear systems. In this technique, the structure used is of the fuzzy Takagi-Sugeno of which the consequences are local linear models that represent the system of different points of operation and the precursors are membership functions whose adjustments are realized by the learning phase of the neuro-fuzzy ANFIS technique. The models that represent the system at different points of the operation can be found with linearization techniques like, for example, the Least Squares method that is robust against sounds and of simple application. The fuzzy system is responsible for informing the proportion of each model that should be utilized, using the membership functions. The membership functions can be adjusted by ANFIS with the use of neural network algorithms, like the back propagation error type, in such a way that the models found for each area are correctly interpolated and define an action of each model for possible entries into the system. In multi-models, the definition of action of models is known as metrics and, since this paper is based on ANFIS, it shall be denominated in ANFIS metrics. This way, ANFIS metrics is utilized to interpolate various models, composing a system to be identified. Differing from the traditional ANFIS, the created technique necessarily represents the system in various well defined regions by unaltered models whose pondered activation as per the membership functions. The selection of regions for the application of the Least Squares method is realized manually from the graphic analysis of the system behavior or from the physical characteristics of the plant. This selection serves as a base to initiate the linear model defining technique and generating the initial configuration of the membership functions. The experiments are conducted in a teaching tank, with multiple sections, designed and created to show the characteristics of the technique. The results from this tank illustrate the performance reached by the technique in task of identifying, utilizing configurations of ANFIS, comparing the developed technique with various models of simple metrics and comparing with the NNARX technique, also adapted to identification

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity