Mechanical modeling of grain boundary sliding of polycrystals

Using a variational method, a general three-dimensional solution to the problem of a sliding spherical inclusion embedded in an infinite anisotropic medium is presented in this paper. The inclusion itself is also a general anisotropic elastic medium. The interface is treated as a thin interface layer with interphase anisotropic properties. The displacements in the matrix and the inclusion are expressed as polynomial series of the cartesian coordinate components. Using the virtual work principle, a set of linear algebraic equations about unknown coefficients are obtained. Then the general sliding spherical inclusion problem is accurately solved. Based on this solution, a self-consistent method for sliding polycrystals is proposed. Combining this with a two-dimensional model of an aggregate polycrystal, a systematic analysis of the mechanical behaviour of sliding polycrystals is given in detail. Numerical results are given to show the significant effect of grain boundary sliding on the overall mechanical properties of aggregate polycrystals.

Crack growth by grain boundary cavitation in the transient and extensive creep regimes

Crack growth due to cavity growth and coalescence along grain boundaries is analyzed under transient and extensive creep conditions in a compact tension specimen. Account is taken of the finite geometry changes accompanying crack tip blunting. The material is characterized as an elastic-power law creeping solid with an additional contribution to the creep rate arising from a given density of cavitating grain boundary facets. All voids are assumed present from the outset and distributed on a given density of cavitating grain boundary facets. The evolution of the stress fields with crack growth under three load histories is described in some detail for a relatively ductile material. The full-field plane strain finite element calculations show the competing effects of stress relaxation due to constrained creep, diffusion and crack tip blunting. and of stress increase due to the instantaneous elastic response to crack growth. At very high crack growth rates the Hui-Riedel fields dominate the crack tip region. However. the high growth rates are not sustained for any length of time in the compact tension geometry analyzed. The region of dominance of the Hui-Riedel field shrinks rapidly so that the near-tip fields are controlled by the HRR-type field shortly after the onset of crack growth. Crack growth rates under various conditions of loading and spanning the range of times from small scale creep to extensive creep are obtained. We show that there is a strong similarity between crack growth history and the behaviour of the C(t) and C(t) parameters. so that crack growth rates correlate rather well with C(t) and C(t). A relatively brittle material is also considered that has a very different near-tip stress field and crack growth history.

The progress of solar-terrestrial sciences in china

 SOLAR-TERRESTRIAL SCIENCESThe solar-terrestrial sciences study how the solar energy, momentum and mass transfer through the interplanetary space, the earth magnetosphere, the ionosphere and the neutral atmosphere, and their influence on earth environment. The solar-terrestrial sciences are also called, sometimes, the solar-terrestrial physics, solar-terrestrial relations, solar-terrestrial 更多还原

Effect of grain size on slow fatigue crack propagation and plastic deformation near crack tip

Fatigue crack growth and its threshold are investigated at a stress ratio of 0.5 for the three-point bend specimen made of Austenitic stainless steel. The effect of grain size on the crack tip plastic deformation is investigated. The results show that the threshold value Δkth increases linearly with the square root of grain size d and the growth rate is slower for materials with larger grain size. The plastic zone size and ratio for different grain sizes are different at the threshold. The maximum stress intensity factor is kmax and σys is the yield strength. At the same time, the characteristics of the plastic deformation development is discontinuous and anti-symmetric as the growth rate is increased from 2·10—8 to 10−7 mm/cycle.

Annual report 2002 - North Pacific Marine Science Organization (PICES). Eleventh meeting, Qingdao, People's Republic of China, October 18-16, 2002

Report of Opening Session (pdf 51 KB) Report of Governing Council Meeting(pdf 136 KB) Report of the Finance and Administration Committee (pdf 48 KB) Reports of Science Board and Committees: Science Board (pdf 71 KB) Biological Oceanography Committee (pdf 66 KB) Working Group 14: Effective sampling of micronekton Marine Birds and Mammals Advisory Panel Fishery Science Committee (pdf 36 KB) Working Group 16: Climate change, shifts to fish production, and fisheries management Marine Environmental Quality Committee (pdf 39 KB) Working Group 15: Ecology of Harmful Algal Blooms (HABs) in the North Pacific Physical Oceanography and Climate Committee (pdf 49 KB) North Pacific Data Buoy Advisory Panel Working Group 17: Biogeochemical data integration and synthesis Technical Committee on Data Exchange (pdf 29 KB) Implementation Panel on the CCCC Program (pdf 43 KB) BASS Task Team (pdf 30 KB) Iron Fertilization Experiment Advisory Panel MODEL Task Team (pdf 28 KB) MONITOR Task Team (pdf 34 KB) Summary of Continuous Plankton Recorder activities in 2002 REX Task Team (pdf 21 KB) Documenting Scientific Sessions (pdf 140 KB) List of Participants (pdf 59 KB) List of Acronyms (pdf 21 KB)

Annual report 1995 - North Pacific Marine Science Organization (PICES). Fourth meeting, Qingdao, People's Republic of China, October 16-24, 1995

Report of Opening Session Report of Governing Council Meetings Reports of Science Board and Committees: Science Board Biological Oceanography Committee Fishery Science Committee Marine Environmental Quality Committee Physical Oceanography and Climate Committee Technological Committee on Data Exchange Finance and Administration: Report of the Finance and Administration Committee Assets on 31st of December, 1994 Income and Expenditures for 1994 Budget for 1996 Composition of the Organization List of Participants List of Acronyms (Document has 96 pages.)

Particularidades de China para el desarrollo empresarial: reflexión a partir de casos de estudio

[ES] China ha irrumpido como actor principal del escenario global al haber protagonizado, durante las tres últimas décadas, un proceso de transformación económica y social de gran magnitud. Ahora bien, vender productos –sobre todo, del sector de alimentación– de origen occidental en China es, con diferencia, el reto más complicado al que deben enfrentarse las compañías de deciden entrar a operar en este mercado.

Recommendation domains for pond aquaculture: country case study: development and status of freshwater aquaculture in Henan Province, China

This monograph is the case study for China, with a particular focus on Henan Province, the project location. Written in three parts, it first describes the historical background, production levels and trends, economic and institutional environment, policy issues, and market situation in China in general. The main part of the study presents findings from two different surveys conducted in Henan Province. County-level information is used to analyze the current situation of aquaculture, providing a more disaggregated picture than what is generally available from national statistics. Data collected in a survey of fish farmers in two locations in Henan are then analyzed with regard to the prevailing aquaculture technology and production practices, economic performance of pond fish farming, and the key reasons for aquaculture adoption. In the final chapter, constraints and opportunities for the aquaculture sector in China in general are discussed. (pdf contains 68 pages.)

Main Progress of Microgravity Sciences and Space Life Sciences Research in China

Influence of Wind and Grain Size on Migration of Asymmetric Sand Waves

Large parts of shallow seas are covered by regular seabed patterns and sand wave is one kind of these patterns. The instability of the sedimentary structures may hazard pipelines and the foundations of offshore structures. In the last decade or so, it's a focus for engineers to investigate the movement mechanism of sand waves. Previous theoretical studies of the subject have developed a general model to predict the growth and migration of sand waves, which is based on the two-dimensional vertical shallow water equations and the bed-form deformation equations. Although the relation between wave-current flow and sand bed deformation has been established, the topographic influence has not been considered in the model. In this paper some special patterns, which are asymmetric and close to the reality, are represent as the perturbed seabed and the evolution of sand waves is calculated. The combination of a steady flow induced by wind and a sinusoidal tidal flow is considered as the basic flow. Finally the relations of some parameters (grain size, etc.) and sand waves' growth and migration are discussed, and the growth rate and migration speeds of asymmetric sand waves are carried out.

Microstructure and mechanical properties of copper subjected to high pressure torsion

Experiments were conducted on copper subjected to High Pressure Torsion to investigate the evolution of microstructure and microhardness with shear strain, gamma. Observations have been carried out in the longitudinal section for a proper demonstration of the structure morphology. An elongated dislocation cell/subgrain structure was observed at relatively low strain level. With increasing strain, the elongated subgrains transformed into elongated grains and finally into equiaxed grains with high angle grain boundaries. Measurements showed the hardness increases with increasing gamma then tends to saturations when gamma >5. The variation tendency of microhardness with gamma can be simulated by Voce-type equation.

The response of porous Al2O3 probed to nanoindentation

The response of porous Al2O3 to nanoindentation was investigated at microscopic scales (nm-mu m) and under ultra-low loads from 5 to 90 mN with special attention paid to the dependence of the load-depth behaviour to sample porosity. It was found that the load-depth curves manifest local responses typical of the various porous structures investigated. This is particularly clear for the residual deformation after load removal. Similarly, the limited mean pressure of the sample containing small grains and interconnected pores is consistent with its porous structure. By comparison, the samples with larger grain size and various porous structures exhibit higher pressures and smaller residual deformations that can be attributed to the mechanical response of the solid phase. (C) 2007 Elsevier B.V. All rights reserved.