Estudo sobre fornos de tratamento térmico e propostas de cogeração de energia em usina siderurgica não integrada

Steel industry is a sector heavily dependent on energy, both electrical and thermal. Since the receipt of raw materials to the shipment of finished products to customers, through mergers, casting, rolling, heat treatment, inspection, among others, high amounts of energy are demanded, generating very significant costs to the productive chain in its entirety . Therefore, any alternative that favors the reduction in energy consumption or barateie the cost of this is very welcome. Within this context, this paper aims to make a technical and economic analysis of installing a cogeneration plant in the field rolling in a non-integrated steel mill. Two configurations are proposed plants, with one being the use of heat from waste gases from furnaces existing in the area mentioned and another with the use of heat from waste gases from an internal combustion engine. Both proposals are evaluated technically and later is done the economic analysis, calculating the financial return (pay back) in relation to the investment required, operation and maintenance of the plant

Estudo das propriedades físicas em materiais vítreos do sistema 50B2O3 - 15CuO - 20Li2O - 15X (X= Na2O, K2O, RbCI e Cs2O)

The increasing demand for devices for solid state applications in many technological areas has resulted in a high demand for new materials. Among these material have the advantage of being manufactured with different chemical compositions, and may have physical properties equal to or higher than the corresponding crystalline material. The aim of this paper was to produce borate glass system 50B2O3 – 15CuO – 20Li2O – 15X (X = Na2O, K2O, RbCl e Cs2O) to analyze the influence of the atomic radius of alkali in the physical properties of this glass system. The glasses were synthesized by the process of melting and molding. The characteristic temperatures were determined by the technique of scanning calorimetry (DSC). The non-crystalline was determined by x-ray diffraction. In order to determine the molar volume a density measurement by using the Archimedes method was used. The structural characterization was carried out using the technique of infrared spectroscopy

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties

Musuko: os filhos da miscigenação

This project is about a book-report, which will discuss the nipo-brazilian’s identity. The Kasato-Maru ship arrived at Santos about a hundred years ago, opening a path that would never be closed: the path between Japan and Brazil, countries both geographically and culturally opposite. Miscegenation brings the nipo-brazilian to life, a individual who does not feel entirely Brazilian or Japanese. The goal of the book is to discuss the nipo-brazilian’s identity, once known that this individual can adopt one or other culture, or even merge both. It is not intended to conclude anything, so the main objective fulfills itself in the research of the possibilities of identities through interviews, theories, Japanese immigration’s history and Brazilian’s culture

Auxílio do geoprocessamento para a geração do mapa de suscetibilidade à erosão: o caso do córrego Mandu, Rio Claro/SP

The mining of sand, currently, is essential for urban growth, by providing input for the building industry. The consequences of this mining activity to environmental triggers may be severe and irreversible. Among the major impacts caused by sand mining the riparian vegetation removal is detached. The riparian vegetation is essential for balance and maintaining the local ecosystem. For all that had been shown, is possible to verify the importance of environmental studies in areas wich there are mining. This study aimed specially to assess environmental impacts triggered by a mining, located near the headwaters of the stream Mandu, situated in Ajapi, District of Rio Claro-SP. For this purpose, we used remote sensing techniques and GIS to produce thematic maps of slope, pedology, geology, land use and occupation of the soil, and riparian vegetation, using the capabilities of GIS / ArcGIS. The slope map was based on data from the Cartographic IGC 1979, scale 1:10,000. For the production of pedological and geological maps were used Semi-Detailed soil survey of the state of São Paulo, 1981 (1:100,000) and the Geological Map of Zaine (1994), scale 1:50,000, respectively. Since the maps of Use and Land Occupation and Riparian Forest were obtained by visual interpretation of the image of CBERS 2010 following the merger between the HRC and CCD images. From these mappings, and through multi-criteria analysis, map of susceptibility to erosion was made, which supported the environmental assessment of the studied area, indicating susceptible and unsuitable areas for the deployment of economic activities and urban sprawl. This study serves as a model can be replicated in other watersheds, assisting in the proper use planning and land use, aiming at the rational use of natural resources

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Crescimeno de apatita na superfície da liga Ti-7, 5Mo empregando tratamento higrotérmico

The objective of the present work was to evaluate surface of experimental alloy Ti-7.5Mo after hydrothermal treatment. Ingots were obtained in arc melting furnace under an argon atmosphere and then homogenized under vacuum at 1100ºC for 86.4 ks to eliminate chemical segregation and after cold worked discs were cutting and grinding. For surface treatment, samples were immersed in a container with NaOH aqueous solution 5M, autoclaved, washed with distilled water. Followed, samples were heat treated and they were soaking in 5xSBF to form an apatite layer on the surface. Surfaces were investigated by, scanning electron microscopy, X-Rays powder diffraction, atomic force microscopy and contact angle, in order to evaluate the wettability of the alloy surface. The results were compared with our previous studies using the group of chemical surface treatments and results shows better condition is 120 minutes in the autoclave

Caracterização da liga do sistema binário Ti-15Mo para aplicações biomedicas

As they have excellent mechanical properties, corrosion resistance and biocompatibility, much research has been conducted with respect to biomedical applications of titanium alloys. This work aims to study the experimental system binary alloy Ti-15Mo, in the raw state of fusion and heat treatment after homogenization, solubilization and calcination (simulating conditions employed for nanotube growth) targeting biomedical applications. Samples were obtained by casting the components in an electric arc furnace with inert atmosphere of argon. After obtaining the alloy, it was heat treated at three different heat treatments, namely homogenizing, calcining and simulation solubilization. The phases present were analyzed by X-ray diffraction, optical microscopy and microhardness testing

Caracterização funcional da proteína XAC1201 envolvida na patogenicidade de Xanthomonas citri subsp. citri

Pós-graduação em Agronomia (Genética e Melhoramento de Plantas) - FCAV

Mediadores da via intrínseca da morte celular programada relacionados à infecção in vitro pelo herpesvirus bovino tipo 5

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Teorema de Riemann-Roch, morfismos de Frobenius e a hipótese de Riemann

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O imaginário sertanejo no Romance d‘A Pedra do Reino e o príncipe do sangue do vai-e-volta: memória e invenção em uma imagística quadernesca

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O estatuto lexical das preposições sob e sobre

This paper describes the prepositions sob and sobre in the Functional Discourse Grammar framework (HENGEVELD; MACKENZIE, 2008) aiming at checking their lexical or grammatical status on the basis of classification criteria postulated by Keizer (2007). The following aspects point to their lexical status : (i) they consist of an Ascription Subact; (ii) they contain a specific content on the vertical axis signaling inferiority and superiority position in relation to a limit; (iii) they are not required by any predicate, but they are predicates by themselves, which require complementation by an argument playing Reference semantic function; (iv) they may be combined with de, em, para and por; which are genuine grammatical prepositions; and, finally, (v) they are not subjected to any phonological process of reduction and fusion.

Crescimento de apatita na superfície da liga Ti-25Ta empregando dois tipos de tratamento de superfície: biomimético e deposição de polímero por eletrofiação

Titanium and its alloys has been widely used as materials for metallic biomaterials implants are usually employed to restore the hard tissue function, being used for artificial joints and bones, synthetic plates, crowns, dental implants and screws . Objective of this work was the surface modification of Ti-alloy 25Ta from biomimetic surface treatment of employment and deposition of polymer by electrospinning. The league was obtained from the fusion of the pure elements in the arc furnace with controlled atmosphere. The ingots were subjected to heat treatment, cold forged and sectioned discs with 13 mm diameter and 3 mm thick. Two surface treatments was evaluated, biomimetic and electrospinning with PCL fiber. The biomimetic treatment was performed involving alkaline treatment for three molarities 1.5M, 3M and 5M with immersion in SBF. The electrospinning was performed using PCL polymer alloy surface after the alkali treatment Ti25Ta 1M. For this group the polymer coated surfaces were immersed in calcium phosphate containing solution for immobilization of apatite. The results were compared with previous studies using surface treatment group to verify hydroxyapatite formation on the sample surface and it is concluded that the best condition is biomimetic treatment with 5M alkali treatment and heat treatment at 80 ° C for 72 hours

Estudo da influência do agente nucleante )ALTi5%B1%) na microestrutura de chapas AA8011 obtidas por lingotamento contínuo

The aluminum includes several properties with excellent relation between weight and mechanical resistance. With technological advances, increasingly demand the development of new alloys and other production processes in order to reduce the cost of production and insert these new alloys in broader applications. The process of continuous caster (TRC promoted the unite of the aluminum smelting process with the first stage of rolling, making it most economical through the merger these two phases besides transform the continuous casting process. The AA8xxx series is one of the most versatile aluminum alloys and the most often used in continuous caster process provided a great potential application in the market. In order to further, optimize the process it is necessary to increase awareness of the aluminum solidification phenomena associated with the addition of grain refiner, and control of some aluminum production parameters in the process (production rate, metal temperature, etc.). In this study, AA8011 alloy samples were taken in the raw state obtained by the continuous casting process. The samples were laminated to a thickness of 7mm during the process itself and analyzed at three points along its width by microstructural analysis throughout its thickness, the variation rate of addition of the grain refiner in order to assess the influence of this addition with crystallographic formation and some formation of intermetallic precipitates during the solidification. Through this work, it was possible to improve the knowledge related to the addition of refiner with the monitoring of these production processes