Evidence for oxygen-island formation on Al(111): Cluster-model theory and x-ray photoelectron spectroscopy

The O 1s x-ray photoelectron spectroscopy spectrum for Al(111)/O at 300 K shows two components whose behavior as a function of time and variation of detection angle are consistent with either (a) a surface species represented by the higher binding-energy (BE) component and a subsurface species represented by the lower BE component, or (b) small close-packed oxygen islands with the interior atoms represented by the lower BE component and the perimeter atoms by the higher BE component. We have modeled both situations using ab initio Hartree-Fock wave functions for clusters of Al and O atoms. For an O atom in a threefold site, it was found that a below-surface position gave a higher O 1s BE than an above-surface position, incompatible with interpretation (a). This change in the O 1s BE could arise because the bond for O to Al may have a more covalent character when the O is below the surface than when it is above the surface. We present evidence consistent with this view. An O adatom island with all the O atoms in threefold sites gives calculated O 1s BE's which are significantly higher for the perimeter O atoms. Further, the results for an isolated O island without the Al substrate present also give higher BE¿s for the perimeter atoms. Both these results are consistent with interpretation (b). Published scanning-tunneling-microscopy data supports the suggestion that the chemisorbed state consists of small, close-packed islands, whereas the presence of two vibrational modes in high-resolution electron-energy-loss spectroscopy data has been interpreted as representing surface and subsurface oxygen atoms. In light of the present results, we suggest that a vibrational interpretation in terms of interior and perimeter adatoms should be considered.

Assessing the pH and DP of canvasses with NIR spectroscopy

The canvas support in easel paintings is composed mainly of cellulose. One of the maindegradation paths of cellulose is acid-catalysed hydrolysis, which means that in an acidic environment (low pH), its degradation proceeds at a faster rate (Strlič et al., 2005).The main effect of acid-catalysed hydrolysis is the breaking up of the polymer chains,measured by the “Degree of Polymerisation” (DP). The lowering of the DP value impliesa lower mechanical strength of the textile (Scicolone, 1993), and thus this parameter canbe used to monitor degradation. Knowing these two parameters can, therefore, be veryinformative regarding the condition of the canvas support.

Polydispersity index from linear viscoelastic data: Unimodal and bimodal linear polymer melts

This article describes a method for determining the polydispersity index Ip2=Mz/Mw of the molecular weight distribution (MWD) of linear polymeric materials from linear viscoelastic data. The method uses the Mellin transform of the relaxation modulus of a simple molecular rheological model. One of the main features of this technique is that it enables interesting MWD information to be obtained directly from dynamic shear experiments. It is not necessary to achieve the relaxation spectrum, so the ill-posed problem is avoided. Furthermore, a determinate shape of the continuous MWD does not have to be assumed in order to obtain the polydispersity index. The technique has been developed to deal with entangled linear polymers, whatever the form of the MWD is. The rheological information required to obtain the polydispersity index is the storage G′(ω) and loss G″(ω) moduli, extending from the terminal zone to the plateau region. The method provides a good agreement between the proposed theoretical approach and the experimental polydispersity indices of several linear polymers for a wide range of average molecular weights and polydispersity indices. It is also applicable to binary blends.

Development of Bio-Based Polymers for Use in Asphalt, TR-639, 2014

Asphalt binder is typically modified with poly type (styrene-butadiene-styrene or SBS) polymers to improve its rheological properties and performance grade. The elastic and principal component of SBS polymers is butadiene. For the last decade, butadiene prices have fluctuated and significantly increased, leading state highway agencies to search for economically viable alternatives to butadiene based materials. This project reports the recent advances in polymerization techniques that have enabled the synthesis of elastomeric, thermoplastic, block-copolymers (BCPs) comprised of styrene and soybean oil, where the “B” block in SBS polymers is replaced with polymerized triglycerides derived from soybean oil. These new breeds of biopolymers have elastomeric properties comparable to well-established butadiene-based styrenic BCPs. In this report, two types of biopolymer formulations are evaluated for their ability to modify asphalt binder. Laboratory blends of asphalt modified with the biopolymers are tested for their rheological properties and performance grade. Blends of asphalt modified with the biopolymers are compared to blends of asphalt modified with two commonly used commercial polymers. The viscoelastic properties of the blends show that biopolymers improve the performance grade of the asphalt to a similar and even greater extent as the commercial SBS polymers. Results shown in this report indicate there is an excellent potential for the future of these biopolymers as economically and environmentally favorable alternatives to their petrochemically-derived analogs.

The neurochemical profile quantified by in vivo 1H NMR spectroscopy.

Proton NMR spectroscopy is emerging from translational and preclinical neuroscience research as an important tool for evidence based diagnosis and therapy monitoring. It provides biomarkers that offer fingerprints of neurological disorders even in cases where a lesion is not yet observed in MR images. The collection of molecules used as cerebral biomarkers that are detectable by (1)H NMR spectroscopy define the so-called "neurochemical profile". The non-invasive quality of this technique makes it suitable not only for diagnostic purposes but also for therapy monitoring paralleling an eventual neuroprotection. The application of (1)H NMR spectroscopy in basic and translational neuroscience research is discussed here.

Assessing the pH and DP of canvasses with NIR spectroscopy

The canvas support in easel paintings is composed mainly of cellulose. One of the maindegradation paths of cellulose is acid-catalysed hydrolysis, which means that in an acidic environment (low pH), its degradation proceeds at a faster rate (Strlič et al., 2005).The main effect of acid-catalysed hydrolysis is the breaking up of the polymer chains,measured by the “Degree of Polymerisation” (DP). The lowering of the DP value impliesa lower mechanical strength of the textile (Scicolone, 1993), and thus this parameter canbe used to monitor degradation. Knowing these two parameters can, therefore, be veryinformative regarding the condition of the canvas support.

Evaluation of Photoacoustic Spectroscopy for Quality Control of Cement, TR-409, 1998

This report discusses the feasibility of using infrared photoacoustic spectroscopy (PAS) as a viable technique that can quickly provide information on cement composition prior to use. The PAS technique is of interest because the cost is much lower than for other types of instrumentation used for mineral analysis, it requires virtually no sample preparation, and it can perform multi-component analysis in a matter of minutes. Feasibility of the technique was based on the ability of PAS to identify and quantify sulfate species and major cement matrix components. Strengths and limitations of the technique are presented.

The role of magma rheology during emplacement of the Listino Suite, Adamello Massif, Italy

This thesis studies individual and contextual antecedents of anti-immigrant attitudes by drawing on intergroup threat and contact, social representation, and value theories. As an alternative to previous multilevel research on the topic, it aims to articulate levels of analysis by putting forward a Person x Context Interaction approach. Moreover, rather than focussing exclusively on the impact of a large immigrant proportion, by introducing ideological climates, it develops and examines the normative societal context in which individuals are embedded. The studies largely draw on cross-sectional survey data across Swiss municipalities (Studies 1 to 3) and European countries (Study 4), but are complemented by elite discourses (Study 5) and online collected survey data (Study 6). Study 1 distinguishes between valued and devalued immigrants, thereby shedding light on the impact of immigrant proportion on intergroup contact and threat. Study 2 focuses on the link between immigrant proportion and attitudes towards the Muslim veil by examining its joint impact with conservative ideologies on the individual and municipality level. Aiming to explain threat related to immigrants, the interplay between immigrant proportion and ideological climates is studied across Swiss municipalities (Study 3) and European countries (Study 4). In addition, by adopting a Person x Context Interaction approach, it is investigated whether a context galvanizes individuals already prone to viewing immigrants as threatening, or mobilizes those generally least likely to express prejudice. Finally, to better understand the role political elites play in fuelling ideological climates, the official discourses on the 2011 England riots are analysed (Study 5). With online survey data collected during the riots, it is then shown that once endorsed, threat-eliciting climates are likely to mobilize negative ethnic diversity attitudes in the larger population (Study 6). Overall, this thesis proposes an integrative approach to studying anti-immigrant attitudes and discusses theoretical and methodological implications. - La présente thèse se penche sur les antécédents individuels et contextuels des attitudes négatives envers les immigré e s, en combinant les théories de la menace intergroupe, du contact, des représentations sociales et des valeurs. Elle a plus précisément pour but d'articuler différents niveaux d'analyse à travers une approche insistant sur les interactions entre Individu et Contexte. Ce faisant, elle propose une alternative aux recherches précédentes sur le thème, basées sur une perspective multiniveau plus « classique ». Au lieu de se pencher uniquement sur l'impact de la présence de populations immigrées dans un lieu donné, la recherche réalisée a par ailleurs développé et étudié le concept de climat idéologique, à savoir le contexte normatif au sein duquel les individus sont plongés au quotidien. Les études composant cette thèse se basent essentiellement sur des données d'enquête de grande échelle, récoltées dans diverses municipalités Suisses (Etudes 1 à 3) ou divers pays Européens (Etude 4). Elles sont complétées par l'analyse de discours politiques (Etude 5) et de données récoltées sur internet (Etude 6). Distinguant entre immigré-e'S valorisé-e s et dévalorisé-e-s, l'Etude 1 a eu pour but de mettre en lumière l'impact de la présence d'immigré e s sur le contact et la menace intergroupes. L'Etude 2 a, quant à elle, examiné si la présence d'immigré e s interagit avec les idéologies conservatrices, tant au niveau individuel que municipal, pour expliquer les attitudes envers le voile. Dans le même ordre idée, les études suivantes ont mis en exergue les effets conjoints de la présence d'immigré-e s et du climat idéologique au niveau des municipalités suisses (Etude 3) ou des pays Européens (Etude 4). En s'intéressant aux interactions entre Individu et Contexte, ces études ont en particulier cherché à observer dans quelle mesure ce dernier pouvait galvaniser les attitudes de personnes qui avaient déjà tendance à percevoir les immigré e s comme une menace ou, au contraire, mobiliser des individus desquels on n'attendrait pas de telles attitudes. Pour finir, les dernières études ont eu pour but de mettre en lumière la manière dont les élites politiques alimentent les climats idéologiques. Dans ce but, l'Etude 5 a analysé les discours officiels donnés pendant les émeutes qui ont secoué Londres en 2011, alors que l'Etude 6 a démontré comment le fait d'être en accord avec le message de menace véhiculé par ces discours avait poussé des individus égalitaires à exprimer des attitudes négatives envers la diversité ethnique. Dans l'ensemble, la présente thèse propose donc une approche intégrative d'étudier les attitudes négatives envers les immigré-e-s, et en discute les implications théoriques et méthodologiques.

Raman spectroscopy as a powerful analytical tool: probing the structure of matter

Podeu consultar el llibre complet a: http://hdl.handle.net/2445/32166

Applications of Fourier transform infrared spectroscopy

This article summarizes the basic principles of Fourier Transform Infrared Spectroscopy, with examples of methodologies and applications to different field sciences.

Photoelectron spectroscopy for surface analysis: X-ray and UV excitation

This article summarizes the basic principles of photoelectron spectroscopy for surface analysis, with examples of applications in material science that illustrate the capabilities of the related techniques.

Electron energy loss spectroscopy: physical principles, state of the art and applications to the nanosciences

In the present work we review the way in which the electron-matter interaction allows us to perform electron energy loss spectroscopy (EELS), as well as the latest developments in the technique and some of the most relevant results of EELS as a characterization tool in nanoscience and nanotechnology.

In vivo 13C NMR spectroscopy and metabolic modeling in the brain: a practical perspective.

In vivo 13C NMR spectroscopy has the unique capability to measure metabolic fluxes noninvasively in the brain. Quantitative measurements of metabolic fluxes require analysis of the 13C labeling time courses obtained experimentally with a metabolic model. The present work reviews the ingredients necessary for a dynamic metabolic modeling study, with particular emphasis on practical issues.

Fate of Hydrophilic Nanoparticles in Biological Environments

The nanoparticles developed are based on chitosan, a biocompatible and biodegradable polysaccharide. The chitosan nanoparticles are formed in an entirely water-based process by electrostatic interactions with other biocompatible molecules. As a prerequisite to understand the fate of such nanoparticles in cells, comprehensive characterization and stability studies serve to identify quantitatively the impact of the raw material characteristics and preparation conditions on the nanoparticle characteristics. Methods included H-1 NMR spectroscopy, dilution viscometry, particle size analysis and electron microscopy. Cytotoxicity and cell uptake experiments on RAW 264.7 murine macrophages and p23 murine endothelial cells were performed to investigate the correlation with nanoparticle characteristics and effect of surface decoration with alginate. Cytotoxicity was assessed by the MTT survival test; cell uptake was monitored by fluorescent microscopy using labeled polymers.