De-scummer for beche-de-mer processing

An improved method for processing sea cucumber (beche-de-mer) is described. Details of a machine named de-scummer are presented. The traditional method for preparation is discussed, and the new method outlined; this involves burying boiled sea cucumber in clean sand contained in cement pits for periods of 6-8 h. The animals are then transferred to the de-scummer for mechanical treatment and are boiled again. After this they are dried.

Extended VTS for noise-robust speech recognition

Model compensation is a standard way of improving the robustness of speech recognition systems to noise. A number of popular schemes are based on vector Taylor series (VTS) compensation, which uses a linear approximation to represent the influence of noise on the clean speech. To compensate the dynamic parameters, the continuous time approximation is often used. This approximation uses a point estimate of the gradient, which fails to take into account that dynamic coefficients are a function of a number of consecutive static coefficients. In this paper, the accuracy of dynamic parameter compensation is improved by representing the dynamic features as a linear transformation of a window of static features. A modified version of VTS compensation is applied to the distribution of the window of static features and, importantly, their correlations. These compensated distributions are then transformed to distributions over standard static and dynamic features. With this improved approximation, it is also possible to obtain full-covariance corrupted speech distributions. This addresses the correlation changes that occur in noise. The proposed scheme outperformed the standard VTS scheme by 10% to 20% relative on a range of tasks. © 2006 IEEE.

Speaker and noise factorisation on the AURORA4 task

For many realistic scenarios, there are multiple factors that affect the clean speech signal. In this work approaches to handling two such factors, speaker and background noise differences, simultaneously are described. A new adaptation scheme is proposed. Here the acoustic models are first adapted to the target speaker via an MLLR transform. This is followed by adaptation to the target noise environment via model-based vector Taylor series (VTS) compensation. These speaker and noise transforms are jointly estimated, using maximum likelihood. Experiments on the AURORA4 task demonstrate that this adaptation scheme provides improved performance over VTS-based noise adaptation. In addition, this framework enables the speech and noise to be factorised, allowing the speaker transform estimated in one noise condition to be successfully used in a different noise condition. © 2011 IEEE.

Metal Retention Experiments for the Design of Soil-Mix Technology Permeable Reactive Barriers

Soil-mix technology is effective for the construction of permeable reactive barriers (PRBs) for in situ groundwater treatment. The objective of this study was to perform initial experiments for the design of soil-mix technology PRBs according to (i) sorption isotherm, (ii) reaction kinetics and (iii) mass balance of the contaminants. The four tested reactive systems were: (i) a granular zeolite (clinoptilolite-GZ), (ii) a granular organoclay (GO), (iii) a 1:1-mixture GZ and model sandy clayey soil and (iv) a 1:1:1-mixture of GZ, GO and model soil. The laboratory experiments consisted of batch tests (volume 900mL and sorbent mass 18g) with a multimetal solution of Pb, Cu, Zn, Cd and Ni. For the adsorption experiment, the initial concentrations ranged from 0.01 to 0.5mM (2.5 to 30mg/L). The maximum metal retention was measured in a batch test (300mg/L for each metal, volume 900mL, sorbent mass 90-4.5g). The reactive material efficiency order was found to be GZ>GZ-soil mix>GZ-soil-GO mix>GO. Langmuir isotherms modelled the adsorption, even in presence of a mixed cations solution. Adsorption was energetically favourable and spontaneous in all cases. Metals were removed according to the second order reaction kinetics; GZ and the 1:1-mix were very similar. The maximum retention capacity was 0.1-0.2mmol/g for Pb in the presence of clinoptilolite; for Cu, Zn, Cd and Ni, it was below 0.05mmol/g for the four reactive systems. Mixing granular zeolite, organoclay and model soil increased the chemisorption. Providing that GZ is reactive enough for the specific conditions, GZ can be mixed to obtain the required sorption. Granular clinoptilolite addition to soil is recommended for PRBs for metal contaminated groundwater. The laboratory experiments consisted of batch tests with a multimetal solution of Pb, Cu, Zn, Cd and Ni. The four reactive materials chosen were granular zeolite, clinoptilolite and model sandy clayey soil, granular organoclay and a mix of clinoptilolite, model soil and organoclay. The reactive material efficiency order was found to be granular clinoptilolite>clinoptilolite-soil mix>clinoptilolite-soil-organoclay mix>granular organoclay. © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Assessment of the heavy metals among suspended particulates and dissolved phases in Suez Canal water

The concentrations and distribution of particulate and dissolved heavy metals, viz: Cu, Zn, Pb, Cd, Fe and Mn have been determined seasonally during 2003 in water samples collected from the Suez Canal. The presented data clarifies that the metals exhibited clear differences in their distribution between particulate and dissolved forms. The concentration of particulate heavy metals ranged between 0.09-3.13, 0.57-15.02, 0.18-3.87, 0.02-0.73, 2.74-49.62 and 0.15-5.08 µg/L for Cu, Zn, Pb, Cd, Fe and Mn, respectively. In the same respect, these values for dissolved forms were 0.28-4.12, 0.57-9.08, 0.27-2.50, 0.02-1.24, 1.94-42.50 and 0.11-3.65 µg/L. The concentrations of particulate metals viz: Zn, Pb, Cd, Fe and Mn were high was compared to the dissolved forms. Dissolved copper, rather than particulate, showed the highest percentage of total copper. The particulate forms of Pb, Cd, Fe and Mn always had higher concentrations than the dissolved forms during the course of study except in the summer season. The northern part of the Suez Canal at Port Said showed mean concentrations of particulate and dissolved Cu=1.43 and 2.10, Zn=8.61 and 3.17, Pb=1.72 and 1.23, Cd=0.35 and 0.35, Fe= 23.49 and 15.83 and Mn=2.09 and 1.82 µg/L. These high concentrations may be attributed to the greater activities, particularly loading and unloading operations at Port Said harbour s industrial effluents and domestic drainage of Port Said city. In contrast, the Sinai side could be considered as reference site, as it was almost clean, i.e., without harmful outfalls, where Cu=0.16 and 0.56, Zn=2.14 and 0.94, Pb=6.29 and 3.44, Cd=0.055 and 0.088, Fe=6.29 and 3.44 and Mn=0.56 and 0.26 µg/L for particulate and dissolved metals respectively.

Identification of biodiversity and distribution pattern of benthic Foraminifera and Ostracoda in continental shelf sediments of the Oman Sea

Biodiversity and distribution of benthic Foraminifera and Ostracoda in the continental shelf sediments of the Omman Sea was studied in order to indicating of the composition of benthic foraminiferal and ostracodal communities and determining of their relationship with the environmental factors of the Omman Sea. Sediment samples were gathered in winter 2006 from twelve stations ranging in depth from 30 to 103 meters. Environmental factors including depth, temperature, salinity, dissolved Oxygen and pH were measured with a CTD system during sampling time and grain size and total organic matter were measured in laboratory. From the overall 57 benthic foram species, there were 52 identified species belong to 25 genera of 16 families. The cosmopolitan foraminifer, Ammonia beccarii, was common in all sampling stations. The composition of benthic foram communities had a highly positive correlation with depth, salinity and total organic matter. From the overall 30 ostracod species, there were 26 identified species belong to 22 genera of 13 families. Diversity and aboundance of ostracoda of the Oman Sea decreased from east to west and from south to north but increased slightly in the northwest (near the Strait of Hormoz). Ostracoda of the genus Propontocypris were common in all sampling stations but the genera Cyprideis, Paradoxostom and Hemicytheridea were rare in the Oman Sea. Diversity and aboundance of ostracoda in northern regions were less than southern and were less than foraminifera too. The composition of ostracodal communities had a highly positive correlation with dept, salinity and grain size. Biodiversity and distribution pattern of benthic foraminifera and ostracoda were being different in various sampling stations, especially between northern and southern regions. Water depth, salinity and structure of the sediments were the most important abiotic factors controlling the distribution pattern of benthic foraminifera and ostracoda in the Omman Sea. None existence or rare observation of structural abnormalities and oil polluted individuals in the vicinity of all sampling stations, resulted to the "clean" benthic environment of the Omman Sea.

Organochlorine insecticide residues in sediments from the coast of Chittagong, Bangladesh

A total of 5 samples of marine sediments were analyzed for residues of organochlorine insecticide from the coast of Chittagong, Bangladesh. The analytical method consisted of 3 phases, extraction, clean-up and, analysis through Gas Chromatography (GC) with Electron Capture Detector (ECD). The concentration ranges were as follows 0.18 - 1.33 ng.g¹ for aldrin, 0.2 - 1.84 ng.g¹ for dielddrin, 0.30 - 1.31 ng.g¹ for endrin, 0.11 - 0.26 ng.g¹ for lindane, 0.56- 3.36 ng.g¹ for heptachlor, 0.2- 1.51 ng.g¹ for P,P' DDE, 0.18- 2.91 ng.g¹ for P,P' DDD, 0.11 - 3.12 ng.g¹ for P,P' DDT. These results reveal that the sediments along coast of Chittagong are slightly contaminated with some of these organochlorine insecticides.

Effects of hydrocarbons on reproductive physiology of the pearl oyster, Pinctada fucata

There are a lot of evidence that show hvdrocarbones cause some defect in reproduction and growth of bivalves. Bivalves are filter-feeder, thus accumulate more hydrocarbones in their tissue. In this study adult pearl producing oysters (Pinctada fucata) are used for all experimens. Samples of oysters, water and sediment from four natural beds; Nakhiloo (clean), Hendurabi (semipolluted), Lavan 1 (semipolluted) and Lavan 2 (polluted) were gatherd for 13 succesive months. Temperature, salinity, pH, oxygen and turbidity were recorded in each sampling. Oysters were kept in laboratory for adapation and then their length (DVM) were measured. Hemolymph samples were collected by insuline syring. Sediments and soft tissues of oysters were dissolved in carbon tetrachloride and when heated to extract oil hydrocarbones. UV, GC and IR were used to assay oil hydrocarbones. Accumulation of hydrocabones in soft tissue were as follows : Kakhiloo

Flux line lattice structure and behavior in antiphase boundary free vicinal YBa2Cu3O7-delta thin films

Field angle dependent critical current, magneto-optical microscopy and high resolution electron microscopy studies have been performed on YBa2Cu3O7-delta thin films grown on miscut substrates. High resolution electron microscopy images show that the films studied exhibited clean epitaxial growth with a low density of antiphase boundaries and stacking faults. Any antiphase boundaries (APBs) formed near the film substrate interface rapidly healed rather than extending through the thickness of the film. Unlike vicinal films grown on annealed substrates, which contain a high density of antiphase boundaries, magneto-optical imaging showed no filamentary flux penetration in the films studied. The flux penetration is, however, asymmetric. This is associated with intrinsic pinning of flux strings by the tilted a-b planes and the dependence of the pinning force on the angle between the local field and the a-b planes. Field angle dependent critical current measurements exhibited the striking vortex channeling effect previously reported in vicinal films. By combining the results of three complementary characterization techniques it is shown that extended APB free films exhibit markedly different critical current behavior compared to APB rich films. This is attributed to the role of APB sites as strong pinning centers for Josephson string vortices between the a-b planes. (C) 2003 American Institute of Physics.

Seawater irrigation systems for intensive marine shrimp farming in Thailand

The aim of the seawater irrigation system (SIS) is to clean up shrimp pond effluent and provide high quality seawater for shrimp farming. The system has 3 components: water intake; treatment reservoir and discharge system. There are criteria for site selection because shrimp farmers are required to form associations so they can work closely together. The construction site must be on the coastal area outside a mangrove forest and located away from a production agricultural area. All construction sites must have undergone an environmental impact assessment, and should be located on the area listed in Thailand's Coastal Zone Management Plan. Five SIS projects, which cover a culture area of 6,500 ha with 1,300 farmers (families), were completed and operated. The Department of Fisheries has planned for another 28 projects, that will cover almost 44,000 ha of culture area.

Endosulfan: a hidden menace

A clean and healthy environment is paramount to human existence. While pesticide use has successfully sustained agricultural and food production in our lifetime as well as safeguarded human health by controlling insect pests, it has also caused many tragedies including population declines in our wildlife, fatalities in workers exposed to pesticides in its manufacture and use, and the increasing incidence of dreaded human illnesses such as cancer. A delicate balance should be achieved to mitigate the adverse impact of pesticide use to the environment and at the same time ensuring short- and long-term agricultural productivity. Endosulfan has been effectively used as a pesticide, but much evidence on its chronic and sub-lethal effects on humans and wildlife have been gathered in recent years. More research still needs to be done to determine its effects from long-term exposure at very low levels. Endosulfan is highly toxic to fish and other aquatic animals and, thus, not recommended for use in aquatic ecosystems. However, in some countries, it has been incorrectly used as a molluscicide in rice paddies, which could have an adverse impact on the rice-fish farming systems and on other surrounding aquatic ecosystems. It is clear that such practices should be stopped and users must strictly observe the recommended application methods. Agricultural productivity should be achieved with less pesticide by using integrated pest management programs which make use of biological, cultural, and physical control agents and lower doses of safer pesticide on a need only basis. The benefits of biotechnology should also be used to develop more effective and safer products and techniques. This is a valid approach and one that will require a unified and concerted effort among suppliers and users of pesticides in order to ensure that resources are used to our best advantage with minimal risk.

Human activities and interests within and around lakes of the Victoria and Kyoga basin and their consequences to sustainable fish production

Of all the great lakes, Lake Victoria has the highest population concentration on its fringes. This has resulted into serious human impacts on the ecosystem through intense agricultural activities (cultivation, livestock and over fishing), sporadic settlements, urbanization and industrial establishments. The consequences have been loss of animals and plant life, deforestation and general land degradation, pollution, loss of water quality and clean air. Aquatic life has become endangered and less guaranteeing to continued fish production. Awareness workshops and general talks have been done to a few selected communities by the lakes landing sites and in the catchment area to mitigate the deteriorating environmental conditions. Naturally the situation calls for reversal to the increasing stress of the ecosystem. As a result, every water body surveyed put forward some mitigation suggestions

Switching characteristics of diamond-based m-i-p+ diodes in power electronic applications

Modeling and numerical analysis of diamond m-i-p+ diode have been performed for static and transient analysis using TCAD Sentaurus platform. The simulation results are compared with experimental measurements. Prediction of transient turn-off characteristics of diamond m-i-p+ diode at high temperature is performed for the first time. It was found that unlike conventional Si diode, peak reverse current in diamond m-i-p+ diode reduces with increasing temperature while on-state voltage drop increases. © 2011 IEEE.

Improving reverberant VTS for hands-free robust speech recognition

Model-based approaches to handling additive background noise and channel distortion, such as Vector Taylor Series (VTS), have been intensively studied and extended in a number of ways. In previous work, VTS has been extended to handle both reverberant and background noise, yielding the Reverberant VTS (RVTS) scheme. In this work, rather than assuming the observation vector is generated by the reverberation of a sequence of background noise corrupted speech vectors, as in RVTS, the observation vector is modelled as a superposition of the background noise and the reverberation of clean speech. This yields a new compensation scheme RVTS Joint (RVTSJ), which allows an easy formulation for joint estimation of both additive and reverberation noise parameters. These two compensation schemes were evaluated and compared on a simulated reverberant noise corrupted AURORA4 task. Both yielded large gains over VTS baseline system, with RVTSJ outperforming the previous RVTS scheme. © 2011 IEEE.

Probabilistic amplitude and frequency demodulation

A number of recent scientific and engineering problems require signals to be decomposed into a product of a slowly varying positive envelope and a quickly varying carrier whose instantaneous frequency also varies slowly over time. Although signal processing provides algorithms for so-called amplitude-and frequency-demodulation (AFD), there are well known problems with all of the existing methods. Motivated by the fact that AFD is ill-posed, we approach the problem using probabilistic inference. The new approach, called probabilistic amplitude and frequency demodulation (PAFD), models instantaneous frequency using an auto-regressive generalization of the von Mises distribution, and the envelopes using Gaussian auto-regressive dynamics with a positivity constraint. A novel form of expectation propagation is used for inference. We demonstrate that although PAFD is computationally demanding, it outperforms previous approaches on synthetic and real signals in clean, noisy and missing data settings.