Knowledge sharing in virtual communities

The Internet has transformed the scope, boundaries and dynamics of social and economic interactions. It is argued to have broadened the notion of the community from physical, colocated groups towards collectives that are able to transcend time and space, i.e. virtual communities. Even if virtual communities have been on the academic agenda for a couple of decades, there is still surprisingly little research on knowledge sharing within them. In addition, prior research has largely neglected the complex dynamics between Internet-based communication channels and the surrounding communities in which they are embedded. This thesis aims at building a better understanding of knowledge sharing supported by conversational technologies in intra-organisational virtual communities and external virtual communities supporting relationships with customers. The focus is thus on knowledge sharing in types of virtual communities that seem to be of relevance to business organisations. The study consists of two parts. The first part introduces the research topic and discusses the overall results. The second part comprises seven research publications. Qualitative research methods are used throughout the study. The results of the study indicate that investigation of the processes of knowledge sharing in virtual communities requires a socio-technical perspective, combining the individual, social and technological levels, and understanding the interplay between them. It is claimed that collective knowledge in virtual communities creates the enabling structure for knowledge sharing, and forms the invisible structure of the community on the basis of which it operates. It consists of a shared context, social capital and a unique community culture. The Internet does not inevitably erode social interaction: it seems that supporting social relationships by means of communication technology is a matter of quantity rather than quality. In order to provide access to external knowledge and expertise, firms need to open themselves up to an array of Internet-based conversations, and to consider the relevance of virtual communities to their businesses.

Modeling reaction kinetics and mass transfer in ozonation in water solutions

This dissertation is based on four articles dealing with modeling of ozonation. The literature part of this considers some models for hydrodynamics in bubble column simulation. A literature review of methods for obtaining mass transfer coefficients is presented. The methods presented to obtain mass transfer are general models and can be applied to any gas-liquid system. Ozonation reaction models and methods for obtaining stoichiometric coefficients and reaction rate coefficients for ozonation reactions are discussed in the final section of the literature part. In the first article, ozone gas-liquid mass transfer into water in a bubble column was investigated for different pH values. A more general method for estimation of mass transfer and Henry’s coefficient was developed from the Beltrán method. The ozone volumetric mass transfer coefficient and the Henry’s coefficient were determined simultaneously by parameter estimation using a nonlinear optimization method. A minor dependence of the Henry’s law constant on pH was detected at the pH range 4 - 9. In the second article, a new method using the axial dispersion model for estimation of ozone self-decomposition kinetics in a semi-batch bubble column reactor was developed. The reaction rate coefficients for literature equations of ozone decomposition and the gas phase dispersion coefficient were estimated and compared with the literature data. The reaction order in the pH range 7-10 with respect to ozone 1.12 and 0.51 the hydroxyl ion were obtained, which is in good agreement with literature. The model parameters were determined by parameter estimation using a nonlinear optimization method. Sensitivity analysis was conducted using object function method to obtain information about the reliability and identifiability of the estimated parameters. In the third article, the reaction rate coefficients and the stoichiometric coefficients in the reaction of ozone with the model component p-nitrophenol were estimated at low pH of water using nonlinear optimization. A novel method for estimation of multireaction model parameters in ozonation was developed. In this method the concentration of unknown intermediate compounds is presented as a residual COD (chemical oxygen demand) calculated from the measured COD and the theoretical COD for the known species. The decomposition rate of p-nitrophenol on the pathway producing hydroquinone was found to be about two times faster than the p-nitrophenol decomposition rate on the pathway producing 4- nitrocatechol. In the fourth article, the reaction kinetics of p-nitrophenol ozonation was studied in a bubble column at pH 2. Using the new reaction kinetic model presented in the previous article, the reaction kinetic parameters, rate coefficients, and stoichiometric coefficients as well as the mass transfer coefficient were estimated with nonlinear estimation. The decomposition rate of pnitrophenol was found to be equal both on the pathway producing hydroquinone and on the path way producing 4-nitrocathecol. Comparison of the rate coefficients with the case at initial pH 5 indicates that the p-nitrophenol degradation producing 4- nitrocathecol is more selective towards molecular ozone than the reaction producing hydroquinone. The identifiability and reliability of the estimated parameters were analyzed with the Marcov chain Monte Carlo (MCMC) method. @All rights reserved. No part of the publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior permission of the author.

Reconstruction and analysis of surface variation using photometric stereo

In many industrial applications, accurate and fast surface reconstruction is essential for quality control. Variation in surface finishing parameters, such as surface roughness, can reflect defects in a manufacturing process, non-optimal product operational efficiency, and reduced life expectancy of the product. This thesis considers reconstruction and analysis of high-frequency variation, that is roughness, on planar surfaces. Standard roughness measures in industry are calculated from surface topography. A fast and non-contact method to obtain surface topography is to apply photometric stereo in the estimation of surface gradients and to reconstruct the surface by integrating the gradient fields. Alternatively, visual methods, such as statistical measures, fractal dimension and distance transforms, can be used to characterize surface roughness directly from gray-scale images. In this thesis, the accuracy of distance transforms, statistical measures, and fractal dimension are evaluated in the estimation of surface roughness from gray-scale images and topographies. The results are contrasted to standard industry roughness measures. In distance transforms, the key idea is that distance values calculated along a highly varying surface are greater than distances calculated along a smoother surface. Statistical measures and fractal dimension are common surface roughness measures. In the experiments, skewness and variance of brightness distribution, fractal dimension, and distance transforms exhibited strong linear correlations to standard industry roughness measures. One of the key strengths of photometric stereo method is the acquisition of higher frequency variation of surfaces. In this thesis, the reconstruction of planar high-frequency varying surfaces is studied in the presence of imaging noise and blur. Two Wiener filterbased methods are proposed of which one is optimal in the sense of surface power spectral density given the spectral properties of the imaging noise and blur. Experiments show that the proposed methods preserve the inherent high-frequency variation in the reconstructed surfaces, whereas traditional reconstruction methods typically handle incorrect measurements by smoothing, which dampens the high-frequency variation.

CFD simulation of complex phenomena containing suspensions and flow throughporous media

There is an increasing reliance on computers to solve complex engineering problems. This is because computers, in addition to supporting the development and implementation of adequate and clear models, can especially minimize the financial support required. The ability of computers to perform complex calculations at high speed has enabled the creation of highly complex systems to model real-world phenomena. The complexity of the fluid dynamics problem makes it difficult or impossible to solve equations of an object in a flow exactly. Approximate solutions can be obtained by construction and measurement of prototypes placed in a flow, or by use of a numerical simulation. Since usage of prototypes can be prohibitively time-consuming and expensive, many have turned to simulations to provide insight during the engineering process. In this case the simulation setup and parameters can be altered much more easily than one could with a real-world experiment. The objective of this research work is to develop numerical models for different suspensions (fiber suspensions, blood flow through microvessels and branching geometries, and magnetic fluids), and also fluid flow through porous media. The models will have merit as a scientific tool and will also have practical application in industries. Most of the numerical simulations were done by the commercial software, Fluent, and user defined functions were added to apply a multiscale method and magnetic field. The results from simulation of fiber suspension can elucidate the physics behind the break up of a fiber floc, opening the possibility for developing a meaningful numerical model of the fiber flow. The simulation of blood movement from an arteriole through a venule via a capillary showed that the model based on VOF can successfully predict the deformation and flow of RBCs in an arteriole. Furthermore, the result corresponds to the experimental observation illustrates that the RBC is deformed during the movement. The concluding remarks presented, provide a correct methodology and a mathematical and numerical framework for the simulation of blood flows in branching. Analysis of ferrofluids simulations indicate that the magnetic Soret effect can be even higher than the conventional one and its strength depends on the strength of magnetic field, confirmed experimentally by Völker and Odenbach. It was also shown that when a magnetic field is perpendicular to the temperature gradient, there will be additional increase in the heat transfer compared to the cases where the magnetic field is parallel to the temperature gradient. In addition, the statistical evaluation (Taguchi technique) on magnetic fluids showed that the temperature and initial concentration of the magnetic phase exert the maximum and minimum contribution to the thermodiffusion, respectively. In the simulation of flow through porous media, dimensionless pressure drop was studied at different Reynolds numbers, based on pore permeability and interstitial fluid velocity. The obtained results agreed well with the correlation of Macdonald et al. (1979) for the range of actual flow Reynolds studied. Furthermore, calculated results for the dispersion coefficients in the cylinder geometry were found to be in agreement with those of Seymour and Callaghan.

Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Improving the effectiveness of supply chain development work – an expert role perspective

This study focuses to the intersection of three sets of activities in a company: expert work, development work and supply chain management, SCM. Experts and expert work represent a set of individuals whose efficiency and impact this study is intended to improve, while development work defines the set of organizational activities to focus on. SCM as an expertise area acts as the platform on which this study is built. The study has two aims. Firstly, it aims to derive a model helping an SCM expert to increase the effectiveness of expert work in development tasks by understanding the encountered organizational situations and processes better, reflecting his/her past and future actions to organizational processes and selecting and adjusting the processes and contents of his/her work accordingly. Secondly, it aims to develop applicable approaches and methods to understand, evaluate and manage the organizational processes and situations in development work. The integrative model on approaches and methods to improve the effectiveness of development processes is split to two aggregate dimensions: technical performance of the developed solution and consumption of resources of the development process. Six potential approaches and methods aiming at helping in the management of organizational dimensions are presented in enclosed publications. The approaches focus on three subtasks of development work: decision making, implementation and change, and knowledge accumulation. The approaches and methods have been tested in case studies representing typical development processes in the area of supply chain management. As a result, four suggestions are presented. Firstly, SCM experts are advised to consider the SCM development work to be consisting of development processes. Secondly, inside these processes they should identify and evaluate the risk of difficult decision-making related to organizational factors. Thirdly, they are prompted for an active role in implementation and change, supporting the implementation through whole process. Finally, the development should be seen in a holistic view, taking into account the stage of knowledge and organizational issues related to it, and adopt a knowledge development strategy.

Externalities of Shipping in the Gulf of Finland until 2015

During the last few years, the discussion on the marginal social costs of transportation has been active. Applying the externalities as a tool to control transport would fulfil the polluter pays principle and simultaneously create a fair control method between the transport modes. This report presents the results of two calculation algorithms developed to estimate the marginal social costs based on the externalities of air pollution. The first algorithm calculates the future scenarios of sea transport traffic externalities until 2015 in the Gulf of Finland. The second algorithm calculates the externalities of Russian passenger car transit traffic via Finland by taking into account both sea and road transport. The algorithm estimates the ship-originated emissions of carbon dioxide (CO₂), nitrogen oxides (NO_x), sulphur oxides (SO_x), particulates (PM) and the externalities for each year from 2007 to 2015. The total NOx emissions in the Gulf of Finland from the six ship types were almost 75.7 kilotons (Table 5.2) in 2007. The ship types are: passenger (including cruisers and ROPAX vessels), tanker, general cargo, Ro-Ro, container and bulk vessels. Due to the increase of traffic, the estimation for NO_x emissions for 2015 is 112 kilotons. The NO_x emission estimation for the whole Baltic Sea shipping is 370 kilotons in 2006 (Stipa & al, 2007). The total marginal social costs due to ship-originated CO₂, NO_x, SO_x and PM emissions in the GOF were calculated to almost 175 million Euros in 2007. The costs will increase to nearly 214 million Euros in 2015 due to the traffic growth. The major part of the externalities is due to CO₂ emissions. If we neglect the CO2 emissions by extracting the CO₂ externalities from the results, we get the total externalities of 57 million Euros in 2007. After eight years (2015), the externalities would be 28 % lower, 41 million Euros (Table 8.1). This is the result of the sulphur emissions reducing regulation of marine fuels. The majority of the new car transit goes through Finland to Russia due to the lack of port capacity in Russia. The amount of cars was 339 620 vehicles (Statistics of Finnish Customs 2008) in 2005. The externalities are calculated for the transportation of passenger vehicles as follows: by ship to a Finnish port and, after that, by trucks to the Russian border checkpoint. The externalities are between 2 – 3 million Euros (year 2000 cost level) for each route. The ports included in the calculations are Hamina, Hanko, Kotka and Turku. With the Euro-3 standard trucks, the port of Hanko would be the best choice to transport the vehicles. This is because of lower emissions by new trucks and the saved transport distance of a ship. If the trucks are more polluting Euro 1 level trucks, the port of Kotka would be the best choice. This indicates that the truck emissions have a considerable effect on the externalities and that the transportation of light cargo, such as passenger cars by ship, produces considerably high emission externalities. The emission externalities approach offers a new insight for valuing the multiple traffic modes. However, the calculation of the marginal social costs based on the air emission externalities should not be regarded as a ready-made calculation system. The system is clearly in the need of some improvement but it can already be considered as a potential tool for political decision making.

Making Sense of Women Managers’ Identities through the Constructions of Managerial Career and Gender

This doctoral thesis is about gendered managerial identity construction of women managers. Finnish women managers have been researched from the viewpoints of equality and discrimination issues, careers, and women’s overall positions in work life. However, managerial identity has remained as an unexplored territory. The phenomenon is approached discourse analytically; an interview material that is gathered from 13 women managers in the South-Karelian region is in focus. By studying discourses it is possible to open up understandings how meanings are given to experiences. Women managers’ identity construction is examined from the perspectives of managerial career, managerial practices, and gender. Gender is a meta-concept in this research, as it so profoundly affects our sense of being and acting, although the meaning of it often remains undervalued, invisible, or even denied. This research shows that gender becomes highly visible in managerial contexts, when it is used for some specific purpose, that is, treated as a strategy. By studying women managers it is possible to demystify often so abstract managerial ideals, and open up their taken-for-granted masculine subtexts. It is argued that from the point of view of conducting managerial work, the meaning of self-knowledge appears as critical.

Literature review on permanent magnet generators design and dynamic behavior

This paper is a literature review which describes the construction of state of the art of permanent magnet generators and motors constructing and discusses the current and possible application of these machines in industry. Permanent magnet machines are a well-know class of rotating and linear electric machines used for many years in industrial applications. A particular interest for permanent magnet generators is connected with wind mills, which seem to be becoming increasingly popular nowadays. Geared and direct-driven permanent magnet generators are described. A classification of direct-driven permanent magnet generators is given. Design aspects of permanent magnet generators are presented. Permanent magnet generators for wind turbines designs are highlighted. Dynamics and vibration problems of permanent magnet generators covered in literature are presented. The application of the Finite Element Method for mechanical problems solution in the field of permanent magnet generators is discussed.

Dissertationer - Sverige

Samlingen med signum HB Sv.diss finns vid huvudbiblioteket och innehåller svenska doktorsavhandlingar. Den lista över avhandlingar som fåtts i april 2008 med sökfunktionen Signum och söktermen HB Sv.diss. kommer att ändra då den retroaktiva inmatningen i Alma ur bibliotekets alfabetiska kortkatalog genomförts. Period Antalet titlar - 1899 10 1900-49 214 1950-59 293 1960-69 616 1970-79 2952 Listan antyder att det skulle finns väldigt få svenska avhandlingar före år 1900 vid akademibiblioteket, vilket inte är med verkligheten överensstämmande. Dels ingår en del äldre avhandlingar i övriga samlingar, dels finns det en ansenlig separat samling svenska doktorsavhandlingar från äldre tid som inte i detta skede är katalogiserade, men finns förprickade i ett exemplar av Catalogus disputationum in Academiis Scandinaviae et Finlandiae Lidenianus (Lidén-Marklin) Med sökfunktionen Avancerad sökning och söktermen diss kombinerad med Sveriges ISBN 91 fås alla svenska doktorsavhandlingar vid hela akademibiblioteket fr.o.m. 1980.

Productivity of Business Services - Towards A New Taxonomy

Statistics show that the expanding service sector accounts already for three quarters of GDP in the developed economies. Moreover, there is abundant evidence on high variation in productive performance across the service industries. This suggests divergent technological and institutional trajectories within the tertiary sector. While conceptual knowledge on services and their performance has accumulated substantially, the overall landscape on productivity and competitiveness is still inconclusive. As noted by number of authors the research on service productivity is still in its infancy. The purpose of this paper is to develop further the analytical framework of service productivity. The approach is based on the notion that service definitions, classifications and performance measurement are strongly interdependent. Given the ongoing restructuring of businesses activities with higher information content, it is argued that the dichotomy between manufacturing and services should not be taken too far. Industrial evolution also suggests that the official industry classifications are increasingly outdated and new taxonomies for empirical research are therefore needed. Based on the previous analyses and new insights the paper clarifies the debated concept of service productivity and identifies the critical dimensions by which the service industries cluster. It is also demonstrated that the dimensions enable to construct new service taxonomies which bear essentially on productivity opportunities at the business level. Needles to say the key determinant explaining the development and potential of productivity growth is innovation activity. As an extensive topic of research, however, service innovation is tackled here only in a cursory way. The paper is constructed as follows: the first section focuses on the conceptual issues and evolving nature of service activities. A workable definition of service should capture the diversity of service activities, as well as the aspects of service processes, comprehensively. The distinctions and similarities between services and manufacturing are discussed, too. Section 2 deals with the service productivity, a persistent and controversial issue in academic literature and policy. With the assessments of strengths and weaknesses of the main schools new insights based on value creation will be brought in. Industry classifications and taxonomies are discussed in Section 3. It begins with a short analysis of the official classifications and their evaluation from the perspective of empirical research. Using well-known examples it is shown that the taxonomies on the manufacturing industries have a clear analogy with the business services. As there is a growing interest to regroup services too, the work to date, has been less systematic and inherently qualitative. Based on the earlier contributions threedimensional service taxonomy is constructed which highlight the key dimensions of productive performance. The main findings and implications are summed up in Section 4.

Osaamisen johtaminen Suomen kunnissa

Kunnissa eletään muutosten aikaa, ja osaamisen johtamisella pyritään vastaamaan kehityksen mukanaan tuomiin haasteisiin. Osaamisen johtamista pidetäänkin tärkeänä asiana kuntien kehittämisessä. Viime vuosina osaamisen johtaminen on ollut voimakkaasti esillä myös yksityisellä sektorilla, jossa se on nähty tärkeänä elementtinä kilpailukyvyn kehittämisessä. Osaamisen johtaminen on toimintaa, jolla kehitetään yksilöiden ja organisaation osaamista sekä organisaation yhteistyövalmiutta. Osaamisen johtamisessa huomioidaan myös organisaatiolle asetetut strategiset tavoitteet. Tässä tutkimuksessa osaamisen johtaminen ankkuroidaan tietojohtamisen, henkilöstövoimavarojen johtamisen (HRM:n) ja oppivan organisaation viitekehyksiin. Tutkimusotteeksi on valittu kvantitatiivinen tutkimusote. Kvantitatiivinen tutkimusote mahdollistaa osaamisen johtamisen rakenteellisen analyysin ja kuvaamisen. Tutkimuksen kohderyhmänä ovat kaikki Suomen 444 kuntaa vuonna 2004. Tutkimuksen tiedonkeruu suoritettiin lomakekyselyn avulla, ja tutkimus kohdistettiin kuntien henkilöstöasioiden asiantuntijoille. Tutkimuksen keskeisenä tavoitteena oli mallintaa ja kuvata osaamisen johtamista Suomen kunnissa. Tutkimusongelma liittyy kuntien osaamisen johtamisen nykytilaan ja tavoitteisiin sekä siihen, missä vaiheissa kunnat ovat osaamisen johtamisessaan. Kyselyn avulla tutkittiin myös kuntien halukkuutta kehittää osaamisen johtamistaan. Vastausten pohjalta analysoitiin lisäksi, mitkä asiat kunnissa vaikuttavat osaamisen johtamiseen. Tutkimuksen tuloksissa tulevat esille neljä erilaista kunnissa vallitsevaa osaamisen johtamisen orientaatiota: Strategiaohjattu yhteisöllinen orientaatio, Innovatiivinen orientaatio, Teknologinen orientaatio ja Strategialähtöinen järjestelmäorientaatio. Nämä neljä orientaatiota ovat tunnistettavissa myös taustakirjallisuudessa. Kunnat ryhmiteltiin orientaatioiden perusteella neljään ryhmään, jotka nimettiin seuraavasti: Innostuneet aloittelijat, Tekniset aloittelijat, Edistyneet ja Kehittyvät. Innostuneiden aloittelijoiden ryhmässä korostuu innovatiivinen orientaatio, mutta muut osaamisen johtamisen orientaatiot tulevat esille heikosti. Teknisten aloittelijoiden ryhmässä korostuu teknologinen orientaatio, mutta muut osaamisen johtamisen orientaatiot tulevat esille heikosti. Edistyneiden ryhmässä kaikki osaamisen johtamisen orientaatiot tulevat hyvin esille. Kehittyvien ryhmässä korostuvat sekä innovatiivinen että teknologinen orientaatio. Kuntien osaamisen johtamisen nykytilanne on murroksessa. Osaamisen johtaminen on suuressa osassa kunnista hyvässä vauhdissa, mutta kehitettävääkin on. Tietotekniset välineet osaamisen johtamisessa ovat hyvät useimmissa kunnissa. Tulevaisuuden osaamistarpeina pidetään erityisesti vuorovaikutustaitoja ja oman ammattialan osaamista. Kunnissa on myös huomioitu ainakin tavoitteiden tasolla tulevaisuus ja sen tuomat haasteet.