Redox-active, dinuclear sandwich compounds [Cp*Fe(μ-L)FeCp*] (L = naphthalene and anthracene)

Although there has been much interest in the chemistry of bimetallic transition metal complexes, compounds with naphthalene or anthracene as bridging ligands are still rare. In this article, we describe the synthesis of the homodinuclear iron complexes [Cp*Fe(μ-η4:η4-L)FeCp*] (1: L = C10H8, 2: L = C14H10; Cp* = η5-C5Me5). The complexes were characterized by 1H and 13C{1H} NMR, UV/Vis, and 57Fe Mössbauer spectroscopy, and their molecular structures were determined by X-ray crystallography. Both complexes are diamagnetic as a result of the strong magnetic coupling of the 17e FeI centers mediated by the polyarene bridge. An analysisof the redox behavior of 1 and 2 by cyclic voltammetry andUV/Vis spectroelectrochemistry shows that the complexes can be oxidized reversibly in two well-separated one-electron steps to the monocation [Cp*Fe(μ-L)FeCp*]+ and the dication [Cp*Fe(μ-L)FeCp*]2+. The reduction to the monoanion [Cp*Fe(μ-L)FeCp*]– was also observed.

Effective LAI and CHP of a single tree from small-footprint full-waveform LiDAR

This letter has tested the canopy height profile (CHP) methodology as a way of effective leaf area index (LAIe) and vertical vegetation profile retrieval at a single-tree level. Waveform and discrete airborne LiDAR data from six swaths, as well as from the combined data of six swaths, were used to extract the LAIe of a single live Callitris glaucophylla tree. LAIe was extracted from raw waveform as an intermediate step in the CHP methodology, with two different vegetation-ground reflectance ratios. Discrete point LAIe estimates were derived from the gap probability using the following: 1) single ground returns and 2) all ground returns. LiDAR LAIe retrievals were subsequently compared to hemispherical photography estimates, yielding mean values within ±7% of the latter, depending on the method used. The CHP of a single dead Callitris glaucophylla tree, representing the distribution of vegetation material, was verified with a field profile manually reconstructed from convergent photographs taken with a fixed-focal-length camera. A binwise comparison of the two profiles showed very high correlation between the data reaching R2 of 0.86 for the CHP from combined swaths. Using a study-area-adjusted reflectance ratio improved the correlation between the profiles, but only marginally in comparison to using an arbitrary ratio of 0.5 for the laser wavelength of 1550 nm.

Degree of Conversion and Temperature Increase of a Composite Resin Light Cured with an Argon Laser and Blue LED

Different light sources and power densities used on the photoactivation process may provide changes in the degree of conversion (DC%) and temperature ( T) of the composite resins. Thus, the purpose of this study was to evaluate the DC (%) and T (degrees C) of the microhybrid composite resin (Filtek (TM) Z-250, 3M/ESPE) photoactivated with one argon laser and one LED (light-emitting diode) with different power densities. For the KBr pellet technique, the composite resin was placed into a metallic mould (2-mm thickness, 4-mm diameter) and photoactivated as follows: a continuous argon laser (CW) and LED LCUs with power density values of 100, 400, 700, and 1000 mW/cm(2) for 20 s. The measurements for DC (%) were made in a FTIR spectrometer Bomen ( model MB 102, Quebec, Canada). Spectroscopy ( FTIR) spectra for both uncured and cured samples were analyzed using an accessory of the reflectance diffusion. The measurements were recorded in absorbance operating under the following conditions: 32 scans, 4 cm(-1) resolution, 300 to 4000-cm(-1) wavelength. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1638 cm(-1)) against an internal standard before and after the curing of the specimen: aromatic C-C (peak at 1608 cm(-1)). For T (degrees C), the samples were created in a metallic mould (2-mm thickness, 4-mm diameter) and photoactivated for 20 s. The thermocouple was attached to the multimeter allowing temperature readings. The DC (%) and T (degrees C) were submitted to ANOVA and Tukey`s test (p < 0.05). The degree of conversion values varied from 35.0 to 50.0% ( 100 to 1000 mW/cm(2)) for an argon laser and from 41.0 to 49% (100 to 1000 mW/cm(2)) for an LED. The temperature change values varied from 1.1 to 13.1 degrees C (100 to 1000 mW/cm(2)) for an argon laser and from 1.9 to 15.0 degrees C (100 to 1000 mW/cm(2)) for an LED. The power densities showed a significant effect on the degree of conversion and changes the temperature for both light-curing units.

Effect of power densities and irradiation times on the degree of conversion and temperature increase of a microhybrid dental composite resin

The different parameters used for the photoactivation process provide changes in the degree of conversion (DC%) and temperature rise (TR) of the composite resins. Thus, the purpose of this study was to evaluate the DC (%) and TR of the microhybrid composite resin photoactivated by a new generation LED. For the KBr pellet technique, the composite resin was placed into a metallic mould (1-mm thickness and 4-mm diameter) and photoactivated as follows: continuous LED LCU with different power density values (50-1000 mW/cm(2)). The measurements for the DC (%) were made in a FTIR Spectrometer Bomen (model MB-102, Quebec-Canada). The spectroscopy (FTIR) spectra for both uncured and cured samples were analyzed using an accessory for the diffuse reflectance. The measurements were recorded in the absorbance operating under the following conditions: 32 scans, 4-cm(-1) resolution, and a 300 to 4000-cm(-1) wavelength. The percentage of unreacted carbon-carbon double bonds (% C=C) was determined from the ratio of the absorbance intensities of aliphatic C=C (peak at 1638 cm(-1)) against an internal standard before and after the curing of the specimen: aromatic C-C (peak at 1608 cm-1). For the TR, the samples were made in a metallic mould (2-mm thickness and 4-mm diameter) and photoactivated during 5, 10, and 20 s. The thermocouple was attached to the multimeter to allow the temperature readings. The DC (%) and TR were calculated by the standard technique and submitted to ANOVA and Tukey`s test (p < 0.05). The degree of conversion values varied from 35.0 (+/- 1.3) to 45.0 (+/- 2.4) for 5 s, 45.0 (+/- 1.3) to 55.0 (+/- 2.4) for 10 s, and 47.0 (+/- 1.3) to 52.0 (+/- 2.4) for 20 s. For the TR, the values ranged from 0.3 (+/- 0.01) to 5.4 (+/- 0.11)degrees C for 5 s, from 0.5 (+/- 0.02) to 9.3 (+/- 0.28)degrees C for 10 s, and from 1.0 (+/- 0.06) to 15.0 (+/- 0.95)degrees C for 20 s. The power densities and irradiation times showed a significant effect on the degree of conversion and temperature rise.

Texture analysis based on maximum contrast walker

Recently, the deterministic tourist walk has emerged as a novel approach for texture analysis. This method employs a traveler visiting image pixels using a deterministic walk rule. Resulting trajectories provide clues about pixel interaction in the image that can be used for image classification and identification tasks. This paper proposes a new walk rule for the tourist which is based on contrast direction of a neighborhood. The yielded results using this approach are comparable with those from traditional texture analysis methods in the classification of a set of Brodatz textures and their rotated versions, thus confirming the potential of the method as a feasible texture analysis methodology. (C) 2010 Elsevier B.V. All rights reserved.

Restoring the azimuthal symmetry of lateral distributions of charged particles in the range of the KASCADE-Grande experiment

The reconstruction of Extensive Air Showers (EAS) observed by particle detectors at the ground is based on the characteristics of observables like the lateral particle density and the arrival times. The lateral densities, inferred for different EAS components from detector data, are usually parameterised by applying various lateral distribution functions (LDFs). The LDFs are used in turn for evaluating quantities like the total number of particles or the density at particular radial distances. Typical expressions for LDFs anticipate azimuthal symmetry of the density around the shower axis. The deviations of the lateral particle density from this assumption arising from various reasons are smoothed out in the case of compact arrays like KASCADE, but not in the case of arrays like Grande, which only sample a smaller part of the azimuthal variation. KASCADE-Grande, an extension of the former KASCADE experiment, is a multi-component Extensive Air Shower (EAS) experiment located at the Karlsruhe Institute of Technology (Campus North), Germany. The lateral distributions of charged particles are deduced from the basic information provided by the Grande scintillators - the energy deposits - first in the observation plane, then in the intrinsic shower plane. In all steps azimuthal dependences should be taken into account. As the energy deposit in the scintillators is dependent on the angles of incidence of the particles, azimuthal dependences are already involved in the first step: the conversion from the energy deposits to the charged particle density. This is done by using the Lateral Energy Correction Function (LECF) that evaluates the mean energy deposited by a charged particle taking into account the contribution of other particles (e.g. photons) to the energy deposit. By using a very fast procedure for the evaluation of the energy deposited by various particles we prepared realistic LECFs depending on the angle of incidence of the shower and on the radial and azimuthal coordinates of the location of the detector. Mapping the lateral density from the observation plane onto the intrinsic shower plane does not remove the azimuthal dependences arising from geometric and attenuation effects, in particular for inclined showers. Realistic procedures for applying correction factors are developed. Specific examples of the bias due to neglecting the azimuthal asymmetries in the conversion from the energy deposit in the Grande detectors to the lateral density of charged particles in the intrinsic shower plane are given. (C) 2011 Elsevier B.V. All rights reserved.

Quantification of N-acetylcysteine in pharmaceuticals using cobalt phthalocyanine modified graphite electrodes

Flow injection analysis (FIA) with amperometric detection was employed for the quantification of N-acetylcysteine (NAC) in pharmaceutical formulations, utilizing an ordinary pyrolytic graphite (OPG) electrode modified with cobalt phthalocyanine (CoPc). Cyclic voltammetry was used in preliminary studies to establish the best conditions for NAC analysis. In FIA-amperometric experiments the OPG-CoPc electrode exhibited sharp and reproducible current peaks over a wide linear working range (5.0 x 10(-5)-1.0 x 10(-3) mol L(-1)) in 0.1 mol L(-1) NaOH solution. High sensitivity (130 mA mol(-1) cm(2)) and a low detection limit (9.0 x 10(-7) mol L(-1)) were achieved using the sensor. The repeatability (R.S.D.%) for 13 successive flow injections of a solution containing 5.0 x 10(-4) mol L(-1) NAC was 1.1%. The new procedure was applied in analyses of commercial pharmaceutical products and the results were in excellent agreement with those obtained using the official titrimetric method. The proposed amperometric method is highly suitable for quality control analyses of NAC in pharmaceuticals since it is rapid, precise and requires much less work than the recommended titrimetric method. (C) 2010 Elsevier B.V. All rights reserved.

Endocytosis of prion protein is required for ERK1/2 signaling induced by stress-inducible protein 1

The secreted cochaperone STI1 triggers activation of protein kinase A (PKA) and ERK1/2 signaling by interacting with the cellular prion (PrPC) at the cell surface, resulting in neuroprotection and increased neuritogenesis. Here, we investigated whether STI1 triggers PrPC trafficking and tested whether this process controls PrPC-dependent signaling. We found that STI1, but not a STI1 mutant unable to bind PrPC, induced PrPC endocytosis. STI1-induced signaling did not occur in cells devoid of endogenous PrPC; however, heterologous expression of PrPC reconstituted both PKA and ERK1/2 activation. In contrast, a PrPC mutant lacking endocytic activity was unable to promote ERK1/2 activation induced by STI1, whereas it reconstituted PKA activity in the same condition, suggesting a key role of endocytosis in the former process. The activation of ERK1/2 by STI1 was transient and appeared to depend on the interaction of the two proteins at the cell surface or shortly after internalization. Moreover, inhibition of dynamin activity by expression of a dominant-negative mutant caused the accumulation and colocalization of these proteins at the plasma membrane, suggesting that both proteins use a dynamin-dependent internalization pathway. These results show that PrPC endocytosis is a necessary step to modulate STI1-dependent ERK1/2 signaling involved in neuritogenesis.

Missionsförbundets ungdomsförening i Borlänge 1930-1950

Denna uppsats studerar hur en lokal avdelning inom SMU i Sverige påverkas av det som försiggår i omvärlden mellan 1930-1950. De faktorer som studeras är världskriget, sekulariseringen, ungdomsdebatten, bibelsynsfrågan och depressionen. Undersökningen speglar makrofrågor ur ett mikroperspektiv. Uppsatsens resultat är att SMU i Borlänge påverkas väldigt lite under perioden. Verksamheten inom SMU i Borlänge är förhållande vis lika från år till år. Den största förändringen är att församlingen tappar en stor del av sina medlemmar. Minskningen av medlemsantalet är större än motsvarande minskning inom SMF i Borlänge och SMF nationellt. Förutom medlemsminskningen framförs ett krav på ökade bibelstudier och andra aktiviteter av andlig natur 1942. Orsaken till detta krav är svår att fastställa men det finns anledning att tro att samtliga undersökningspunkter kan har varit bidragande faktorer. Troligtvis har debatten om ungdomens moraliska förfall och sekulariseringen varit de mest betydelsefulla faktorerna.

La confrontation de la laideur avec la beauté dans lesromans Mercure et Attentat. Une étude sur lareprésentation de la dualité thématique laideur-beautéchez Amélie Nothomb. : "Where there is Quasimodo, there is also Esmeralda." The confrontationbetween ugliness and beauty in the novels Mercure and Attentat. Astudy on the representation of the duality beauty-ugliness in the worksof Amélie Nothomb.

This paper studies one of the recurrent topics of writing found in Amélie Nothomb’snovels: beauty and ugliness. The novels Mercure and Attentat are analyzed in detail,with respect to figures of speech used to describe the extreme physical appearance ofthe protagonists and the role of the duality beauty-ugliness in the advancement of theplot.

Perspectivas e sentidos na interação virtual em rede telemática

Esta pesquisa aconteceu a partir de uma lista de discussão, em rede telemática, entre professores da 4ª série do ensino fundamental de três escolas da região central do Estado do Rio Grande do Sul. Neste espaço de interação virtual, tínhamos como objetivo estudar como se instituíam as condições para emergência de novos sentidos, possibilitadores de uma dinâmica auto-organizativa do próprio espaço de interação, assim como seus extravasamentos para as práticas em situação pedagógica. Os referenciais teóricos, que deram sustentação a este estudo, encontram seus fundamentos na Epistemologia Genética de Jean Piaget e nas aproximações realizadas pelo próprio autor, com as teorias da complexidade, especialmente a teoria do caos e dos sistemas dinâmicos auto-organizativos. Na análise dos dados coletados no interior da lista, foi possível observar que o próprio espaço de interação telemática (definido pela lista de discussão) tornou-se operador das interações/reflexões dialógicas, entre professores (S x S) e entre suas práticas em situações pedagógicas (S x O). Os movimentos interativos/reflexivos, num misto de encontros/desencontros de idéias e sentidos, instituíram uma zona de interação telemática (zit). Por conseguinte, devido a multiplicidade de pontos de vista e de espaços-tempos visibilizados nesta zit, novos modos de pensar e de agir abriam-se para um campo virtual de possibilidades (Copntinuação) O que estava inicialmente fragmentado, solto, desorganizado, disperso, sem um sentido aparente e com operadores restringindo as aproximações integrativas (característico das condutas α), aos poucos foi conquistando coerência e estabilidade, integrando os desvios e as perturbações nestas novas construções e aproximando os professores de condutas β e γ. Enfim, a zit configurava suas fronteiras provisórias, apenas nas circularidades complexas, nos estados estacionários (aberturas e fechamentos coexistindo), que emergiam no devir das interações/reflexões partilhadas. Novas perspectivas tornaram-se possíveis e o professor podia, então, deslocar-se em relação a si, ao outro (colegas, autores...) e a própria prática, conquistando metapontos de vista. O que, de um determinado lugar, era restritor e limitava as interações/reflexões, de outro, tornava-se objeto tematizado para meta-reflexões. As oscilações acabaram por produzir novas estabilidades em meio às instabilidades, dessa forma instituindo a própria zit como um operador para os processos de emergência e produções de sentidos. Este estudo é, também, uma contribuição ao uso crítico/criativo das novas tecnologias na educação, enquanto possibilitadora de novos sentidos nas transformações político-pedagógicas.

As perdas de materiais na construção de edificações : sua incidência e seu controle

O presente trabalho consiste em uma análise das perdas de materiais na construção de edificações. Inicialmente, são classificados os diferentes tipos de perdas de materiais e apresentados os resultados de pesquisas já realizadas sobre o assunto. São discutidos, também, alguns princípios do gerenciamento das materiais e apresentados conceitos relativos a sistemas de controle. É apresentada a metodologia e os resultados de um estudo realizado em cinco canteiros de obras, situados na cidade de Porto Alegre, no qual foram levantados índices e causas de incidências de perdas de materiais. A pesquisa realizada demonstrou que há consideráveis variações em relação à incidência de perdas para diferentes insumos e de um mesmo insumo para diferentes canteiros. Estes índices são bastante elevados em comparação com os valores apontados pela bibliografia. Este estudo demonstrou, também, que existem oportunidades de redução das perdas de materiais através de melhorias no manuseio e estacagem de materiais e, principalmente, através de aplicação de métodos que possibilitem a identificação e o controle das perdas durante o processo construtivo. Por fim,é apresentado um conjunto de diretrizes para a implementação de um sistema de controle de perdas de materiais para a construcão de edificações