Design and Control of a Closed-Loop Brushless Torque Actuator

This report explores the design and control issues associated with a brushless actuator capable of achieving extremely high torque accuracy. Models of several different motor - sensor configurations were studied to determine dynamic characteristics. A reaction torque sensor fixed to the motor stator was implemented to decouple the transmission dynamics from the sensor. This resulted in a compact actuator with higher bandwidth and precision than could be obtained with an inline or joint sensor. Testing demonstrated that closed-loop torque accuracy was within 0.1%, and the mechanical bandwidth approached 300 Hz.

Influencia del bajo peso al nacer en el cumplimiento del esquema de vacunación en Colombia

INTRODUCCION. En Colombia y a nivel mundial la vacunación es una estrategia que ha reducido la mortalidad infantil, sin embargo existen bajas coberturas en algunas zonas del país, dentro de las causas de la no vacunación se encuentra el bajo peso al nacer, tema de gran importancia y poco estudiado, encontrándose como una causa controlable y que permitiría a la población acceder a la protección frente a enfermedades inmunoprevenibles. MATERIALES Y METODOS. Se realizó un estudio de tipo observacional de corte trasversal, la muestra fue tomada de la ENDS realizada por Profamilia en el año 2010, se tomó el número total de los encuestados que cumplían con los criterios de inclusión, en total fueron 9694 registros a los que se les realizo; análisis descriptivo, bivariado y multivariado. RESULTADOS. Los niños con bajo peso al nacer tienen menor probabilidad de estar vacunados con el esquema completo con respecto a los niños con peso normal, OR 0762 (IC 95% 0,650; 0,895), se observó que las vacunas en forma individual tienen un comportamiento similar al esquema completo, específicamente en la aplicación en el tiempo indicado para su aplicación, exceptuando triple viral donde no se encontró asociación. CONCLUSION. El bajo peso es un factor determinante en la vacunación a tiempo de los menores y del cumplimiento posterior del esquema, se encontraron variables asociadas al no cumplimiento como el lugar del parto, el índice de pobreza y pertenecer a la etnia afrodescendiente.

Evidencia actual sobre características demográficas en mastitis granulomatosa idiopática

Introducción: La mastitis granulomatosa idiopática es una enfermedad crónica benigna, rara y de etiología desconocida; tiende a confundirse con otras enfermedades debido a síntomas similares. Este estudio pretende identificar y cuantificar las características demográficas, los antecedentes ginecoobstétricos relevantes y las manifestaciones clínicas prediagnósticas de esta enfermedad Metodología: Se realizó una revisión sistemática con análisis agrupado de datos tipo meta análisis. Se utilizó una estrategia de búsqueda en PubMed. Todos los estudios relacionados con la definición, manifestaciones clínicas, diagnóstico, tratamiento y pronóstico de la mastitis granulomatosa idiopática fueron elegibles. Las variables de interés fueron edad, país, antecedente de contracepción hormonal, tiempo de evolución, tiempo desde el último embarazo, diagnóstico inicial, y manifestaciones clínicas previas a la consulta. No hubo restricción en fechas de publicación. Resultados: Fueron incluidas 641 mujeres con diagnóstico de MGI reportadas en 68 publicaciones que cumplieron los criterios de selección. La edad media fue 35.9 años, 14.1% de ellas estaba embarazada o lactando, el antecedente de consumo de anticonceptivos hormonales fue 21% y el tiempo promedio desde el último parto fue de 3.9 años. La afectación ocurre principalmente en mama izquierda y en cuadrante superoexterno. El cáncer de mama y el absceso mamario son diagnósticos diferenciales en la consulta. Discusión: El diagnóstico de MGI es un reto para el ginecólogo desde la consulta inicial. Debido a que sus manifestaciones clínicas no son específicas, su diagnóstico parece apuntar a la necesidad de un proceso de descarte de otras patologías más frecuentes e incluso de peor pronóstico. Palabras clave mastitis granulomatosa idiopática

Las prácticas de recursos humanos y su incidencia en el bienestar laboral de los empleados

El objetivo del presente trabajo es formular, mediante una profunda revisión documental, bibliográfica y empírica, una fundamentación teórica sobre si existe o no incidencia de las prácticas de recursos humanos sobre el bienestar laboral de los empleados, y el que grado en que esta se presenta sobre aspecto como el engagement y la satisfacción laboral. Se realizó la revisión de múltiples estudios empíricos que aportaran evidencia sobre la relación que se presenta entre las principales prácticas de recursos humanos – provisión de personal, formación y desarrollo, promoción de personal, evaluación de desempeño, compensación y pago, y balance trabajo-familia – y el bienestar laboral, representado en el engagement y satisfacción en el trabajo de los empleados. Los resultados de este trabajo indican la existencia de una relación e incidencia de las prácticas de recursos humanos, el bienestar laboral, el engagement y la satisfacción laboral. De igual forma se encontró que estas relaciones son principalmente de carácter positivo, lo cual indica que las organizaciones que desarrollan este tipo de prácticas en su interior, fomentan tanto el desarrollo y la presencia de bienestar laboral en sus empleados, como su perdurabilidad.

La pelota no se mancha: Un estudio histórico sobre el desarrollo y la política en FIFA

Esta investigación se centra en la Fédération Internationale de Football Association (FIFA) como organización política. Intenta responder dos interrogantes primordiales: 1) ¿cómo la FIFA ha constituido el poder que tiene actualmente y, así, hacerse del monopolio indiscutido del fútbol? Y 2) ¿cómo ha cambiado en el tiempo la política interna de FIFA y su vínculo con la política internacional? Para lograr esto, se realiza un estudio histórico, basado principalmente en documentos, que intenta caracterizar y analizar los cambios de la organización en el tiempo. Se enfatizan las últimas dos presidencias de FIFA, de João Havelange y Joseph Blatter, como casos de estudio.

Pulsioximetría de pacientes en hemodiálisis, de la unidad de terapia renal – fundación cardioinfantil, análisis para establecer recomendaciones

Introducción. En Colombia, el 80% de los pacientes con enfermedad renal crónica en hemodiálisis tienen fístula arteriovenosa periférica (FAV) que asegura el flujo de sangre durante la hemodiálisis (1), la variabilidad en el flujo de sangre en el brazo de la FAV hacia la parte distal, puede afectar la lectura de la oximetría de pulso (SpO2) (2), llevando a la toma de decisiones equivocadas por el personal de salud. El objetivo de este estudio es aclarar si existe diferencia entre la SpO2 del brazo de la FAV y el brazo contralateral. Materiales y métodos. Se realizó un estudio de correlación entre los valores de SpO2 del brazo con FAV contra el brazo sin FAV, de 40 pacientes que asistieron a hemodiálisis. La recolección de los datos se llevó a cabo, con un formato que incluyó el resultado de la pulsioximetria y variables asociadas, antes, durante y después de la hemodiálisis. Se comparó la mediana de los deltas de las diferencias con pruebas estadísticas T Student – Mann Whitney, aceptando un valor significativo de p < 0,05. Resultados. No se encontraron diferencias estadísticamente significativas de la SpO2 entre el brazo con FAV y el brazo sin FAV, antes, durante y después de la diálisis, sin embargo si se apreció una correlación positiva estadísticamente significativa. Conclusiones. Se encontró correlación positiva estadísticamente significativa, donde no hubo diferencias en el resultado la pulsioximetría entre el brazo con FAV y brazo sin FAV, por lo tanto es válido tomar la pulsioximetría en cualquiera de los brazos.

Differential recognition of Staphylococcus aureus quorum-sensing signals depends on both extracellular loops 1 and 2 of the transmembrane sensor AgrC.

Virulence in Staphylococcus aureus is regulated via agr-dependent quorum sensing in which an autoinducing peptide (AIP) activates AgrC, a histidine protein kinase. AIPs are usually thiolactones containing seven to nine amino acid residues in which the thiol of the central cysteine is linked to the alpha-carboxyl of the C-terminal amino acid residue. The staphylococcal agr locus has diverged such that the AIPs of the four different S. aureus agr groups self-activate but cross-inhibit. Consequently, although the agr system is conserved among the staphylococci, it has undergone significant evolutionary divergence whereby to retain functionality, any changes in the AIP-encoding gene (agrD) that modifies AIP structure must be accompanied by corresponding changes in the AgrC receptor. Since AIP-1 and AIP-4 only differ by a single amino acid, we compared the transmembrane topology of AgrC1 and AgrC4 to identify amino acid residues involved in AIP recognition. As only two of the three predicted extracellular loops exhibited amino acid differences, site-specific mutagenesis was used to exchange the key AgrC1 and AgrC4 amino acid residues in each loop either singly or in combination. A novel lux-based agrP3 reporter gene fusion was constructed to evaluate the response of the mutated AgrC receptors. The data obtained revealed that while differential recognition of AIP-1 and AIP-4 depends primarily on three amino acid residues in loop 2, loop 1 is essential for receptor activation by the cognate AIP. Furthermore, a single mutation in the AgrC1 loop 2 resulted in conversion of (Ala5)AIP-1 from a potent antagonist to an activator, essentially resulting in the forced evolution of a new AIP group. Taken together, our data indicate that loop 2 constitutes the predicted hydrophobic pocket that binds the AIP thiolactone ring while the exocyclic amino acid tail interacts with loop 1 to facilitate receptor activation.

Does training improve understanding of core concepts in cognitive behaviour therapy by people with intellectual disabilities? A randomized experiment

Background. People with intellectual disabilities (ID) experience similar or even higher rates of mental health problems than the general population and there is a need to develop appropriate treatments. Cognitive behaviour therapy (CBT) is effective for a wide range of disorders in the general population. However, there is some evidence that people with ID may lack the cognitive skills needed to take part in CBT. Aims. To test if people with ID can learn skills required for CBT, specifically the ability to distinguish between thoughts, feelings, and behaviours and to link thoughts and feelings (cognitive mediation). Method. A randomized independent groups design was used to examine the effect of training in CBT on two tasks measuring CBT skills. Thirty-four adults with ID were randomly allocated to the experimental condition ðN ¼ 18Þ or to the control condition ðN ¼ 16Þ. CBT skills were assessed blind at baseline and after the intervention. Results. The training led to significant improvements in participants’ ability to link thoughts and feelings, and this skill was generalized to new material. There was no effect of training on participants’ ability to distinguish amongst thoughts, feelings, and behaviours. People with ID can, therefore, learn some skills required for CBT. This implies that preparatory training for CBT might be useful for people with ID. The results might be applicable to other groups who find aspects of CBT difficult.

A benchmark-driven modelling approach for evaluating deployment choices on a multi-core architecture

The complexity of current and emerging architectures provides users with options about how best to use the available resources, but makes predicting performance challenging. In this work a benchmark-driven model is developed for a simple shallow water code on a Cray XE6 system, to explore how deployment choices such as domain decomposition and core affinity affect performance. The resource sharing present in modern multi-core architectures adds various levels of heterogeneity to the system. Shared resources often includes cache, memory, network controllers and in some cases floating point units (as in the AMD Bulldozer), which mean that the access time depends on the mapping of application tasks, and the core's location within the system. Heterogeneity further increases with the use of hardware-accelerators such as GPUs and the Intel Xeon Phi, where many specialist cores are attached to general-purpose cores. This trend for shared resources and non-uniform cores is expected to continue into the exascale era. The complexity of these systems means that various runtime scenarios are possible, and it has been found that under-populating nodes, altering the domain decomposition and non-standard task to core mappings can dramatically alter performance. To find this out, however, is often a process of trial and error. To better inform this process, a performance model was developed for a simple regular grid-based kernel code, shallow. The code comprises two distinct types of work, loop-based array updates and nearest-neighbour halo-exchanges. Separate performance models were developed for each part, both based on a similar methodology. Application specific benchmarks were run to measure performance for different problem sizes under different execution scenarios. These results were then fed into a performance model that derives resource usage for a given deployment scenario, with interpolation between results as necessary.

Simultaneous analysis of free amino acids and biogenic amines in honey and wine samples using in loop orthophthalaldeyde derivatization procedure

This work presents a RP-HPLC method for the simultaneous quantification of free amino acids and biogenic amines in liquid food matrices and the results of the application to honey and wine samples obtained from different production processes and geographic origins. The developed methodology is based on a pre-column derivatization with o-phthaldialdehyde carried out in the sample injection loop. The compounds were separated in a Nova-Pack RP-C18 column (150 mm × 3.9 mm, 4 μm) at 35 °C. The mobile phase used was a mixture of phase A: 10 mM sodium phosphate buffer (pH 7.3), methanol and tetrahydrofuran (91:8:1); and phase B: methanol and phosphate buffer (80:20), with a flow rate of 1.0 ml/min. Fluorescence detection was used at an excitation wavelength of 335 nm and an emission wavelength of 440 nm. The separation and quantification of 19 amino acids and 6 amines was carried out in a single run as their OPA/MCE derivatives elute within 80 min, ensuring a reproducible quantification. The method showed to be adequate for the purpose, with an average RSD of 2% for the different amino acids; detection limits varying between 0.71 mg/l (Asn) and 8.26 mg/l (Lys) and recovery rates between 63.0% (Cad) and 98.0% (Asp). The amino acids present at the highest concentration in honey and wine samples were phenylalanine and arginine, respectively. Only residual levels of biogenic amines were detected in the analysed samples.

Sinterização de aço inoxidável reforçado com partículas nanométricas dispersas de carbeto de nióbio - NbC

Metal powder sintering appears to be promising option to achieve new physical and mechanical properties combining raw material with new processing improvements. It interest over many years and continue to gain wide industrial application. Stainless steel is a widely accepted material because high corrosion resistance. However stainless steels have poor sinterability and poor wear resistance due to their low hardness. Metal matrix composite (MMC) combining soft metallic matrix reinforced with carbides or oxides has attracted considerable attention for researchers to improve density and hardness in the bulk material. This thesis focuses on processing 316L stainless steel by addition of 3% wt niobium carbide to control grain growth and improve densification and hardness. The starting powder were water atomized stainless steel manufactured for Höganäs (D 50 = 95.0 μm) and NbC produced in the UFRN and supplied by Aesar Alpha Johnson Matthey Company with medium crystallite size 16.39 nm and 80.35 nm respectively. Samples with addition up to 3% of each NbC were mixed and mechanically milled by 3 routes. The route1 (R1) milled in planetary by 2 hours. The routes 2 (R2) and 3 (R3) milled in a conventional mill by 24 and 48 hours. Each milled samples and pure sample were cold compacted uniaxially in a cylindrical steel die (Ø 5 .0 mm) at 700 MPa, carried out in a vacuum furnace, heated at 1290°C, heating rate 20°C stand by 30 and 60 minutes. The samples containing NbC present higher densities and hardness than those without reinforcement. The results show that nanosized NbC particles precipitate on grain boundary. Thus, promote densification eliminating pores, control grain growth and increase the hardness values

Um lugar que passa e sobrevive:o passado e o presente na Vila de Ponta Negra

The Ponta Negra borough is a part and the originally core of Ponta Negra quarter, placed on the South area of Natal/RN city. Its population was constituted by fishermen whose, beyond the fishing work, cultivated small plantations, made carbon and lace. For a long period of time, the borough was isolated from the rest of the city because of the great ground distance and due the fact that the local inhabitants found their own maintenance on the place. The scenery was being little by little modified from de 80 s because of the neighborhood urban development, that became one of the most searching tourism places in the city that turns the borough into a expensive place to live, with plenty of entertainment and high income, due the new habitation standards, new economic activities, new inhabitants belonging to higher social classes, new habits and way of living. The present work aims to verify weather or not, in the middle of all changes, the original social actors that still live in the Ponta Negra borough, are able to keep the traditional community bounds that once guided their existences. On that sense, we will analyze the conflicts that pass through the community, with attention on the sociability, space usage and appropriation

Metodologia para adaptação de microarquiteturas microprogramadas soft-core à uma ISA padrão: estudo do impacto sobre a complexidade de hardware para o padrão MIPS

In academia, it is common to create didactic processors, facing practical disciplines in the area of Hardware Computer and can be used as subjects in software platforms, operating systems and compilers. Often, these processors are described without ISA standard, which requires the creation of compilers and other basic software to provide the hardware / software interface and hinder their integration with other processors and devices. Using reconfigurable devices described in a HDL language allows the creation or modification of any microarchitecture component, leading to alteration of the functional units of data path processor as well as the state machine that implements the control unit even as new needs arise. In particular, processors RISP enable modification of machine instructions, allowing entering or modifying instructions, and may even adapt to a new architecture. This work, as the object of study addressing educational soft-core processors described in VHDL, from a proposed methodology and its application on two processors with different complexity levels, shows that it s possible to tailor processors for a standard ISA without causing an increase in the level hardware complexity, ie without significant increase in chip area, while its level of performance in the application execution remains unchanged or is enhanced. The implementations also allow us to say that besides being possible to replace the architecture of a processor without changing its organization, RISP processor can switch between different instruction sets, which can be expanded to toggle between different ISAs, allowing a single processor become adaptive hybrid architecture, which can be used in embedded systems and heterogeneous multiprocessor environments

Análise topológica experimental por perfilometria cíclica indutiva de superficies de paredes estruturais

To enhance the maintenance practices, Oil and Gas Pipelines are inspected from the inside by automated systems called PIG (Pipeline Inspection Gauge). The inspection and mapping of defects, as dents and holes, in the internal wall of these pipelines are increasingly put into service toward an overall Structural Integrity Policy. The residual life of these structures must be determined such that minimize its probability of failure. For this reason, the investigation on the detection limits of some basic topological features constituted by peaks or valleys disposed along a smooth surface is of great value for determining the sensitivity of the measurements of defects from some combinations of circumferential, axial and radial extent. In this investigation, it was analyzed an inductive profilometric sensor to scan three races, radius r1, r2, r3, in a circular surface of low carbon steel, equipped with eight consecutive defects simulated by bulges and holes by orbit, equally spaced at p/4 rad. A test rig and a methodology for testing in laboratory were developed to evaluate the sensor response and identify their dead zones and jumps due to fluctuations as a function of topological features and scanning velocity, four speeds different. The results are presented, analyzed and suggestions are made toward a new conception of sensor topologies, more sensible to detect these type of damage morphologies

Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level