A feasibility study evaluating an in situ formed synthetic biodegradable membrane for guided bone regeneration in dogs

PURPOSE: The aim was (1) to evaluate the soft-tissue reaction of a synthetic polyethylene glycol (PEG) hydrogel used as a barrier membrane for guided bone regeneration (GBR) compared with a collagen membrane and (2) to test whether or not the application of this in situ formed membrane will result in a similar amount of bone regeneration as the use of a collagen membrane. MATERIAL AND METHODS: Tooth extraction and preparation of osseous defects were performed in the mandibles of 11 beagle dogs. After 3 months, 44 cylindrical implants were placed within healed dehiscence-type bone defects resulting in approximately 6 mm exposed implant surface. The following four treatment modalities were randomly allocated: PEG+autogenous bone chips, PEG+hydroxyapatite (HA)/tricalcium phosphate (TCP) granules, bioresorbable collagen membrane+autogenous bone chips and autogenous bone chips without a membrane. After 2 and 6 months, six and five dogs were sacrificed, respectively. A semi-quantitative evaluation of the local tolerance and a histomorphometric analysis were performed. For statistical analysis, repeated measures analysis of variance (ANOVA) and subsequent pairwise Student's t-test were applied (P<0.05). RESULTS: No local adverse effects in association with the PEG compared with the collagen membrane was observed clinically and histologically at any time-point. Healing was uneventful and all implants were histologically integrated. Four out of 22 PEG membrane sites revealed a soft-tissue dehiscence after 1-2 weeks that subsequently healed uneventful. Histomorphometric measurement of the vertical bone gain showed after 2 months values between 31% and 45% and after 6 months between 31% and 38%. Bone-to-implant contact (BIC) within the former defect area was similarly high in all groups ranging from 71% to 82% after 2 months and 49% to 91% after 6 months. However, with regard to all evaluated parameters, the PEG and the collagen membranes did not show any statistically significant difference compared with sites treated with autogenous bone without a membrane. CONCLUSION: The in situ forming synthetic membrane made of PEG was safely used in the present study, revealing no biologically significant abnormal soft-tissue reaction and demonstrated similar amounts of newly formed bone for defects treated with the PEG membrane compared with defects treated with a standard collagen membrane.

Impact of bone graft harvesting techniques on bone formation and graft resorption: a histomorphometric study in the mandibles of minipigs.

BACKGROUND: Harvesting techniques can affect cellular parameters of autogenous bone grafts in vitro. Whether these differences translate to in vivo bone formation, however, remains unknown. OBJECTIVE: The purpose of this study was to assess the impact of different harvesting techniques on bone formation and graft resorption in vivo. MATERIAL AND METHODS: Four harvesting techniques were used: (i) corticocancellous blocks particulated by a bone mill; (ii) bone scraper; (iii) piezosurgery; and (iv) bone slurry collected from a filter device upon drilling. The grafts were placed into bone defects in the mandibles of 12 minipigs. The animals were sacrificed after 1, 2, 4 and 8 weeks of healing. Histology and histomorphometrical analyses were performed to assess bone formation and graft resorption. An explorative statistical analysis was performed. RESULTS: The amount of new bone increased, while the amount of residual bone decreased over time with all harvesting techniques. At all given time points, no significant advantage of any harvesting technique on bone formation was observed. The harvesting technique, however, affected bone formation and the amount of residual graft within the overall healing period. Friedman test revealed an impact of the harvesting technique on residual bone graft after 2 and 4 weeks. At the later time point, post hoc testing showed more newly formed bone in association with bone graft processed by bone mill than harvested by bone scraper and piezosurgery. CONCLUSIONS: Transplantation of autogenous bone particles harvested with four techniques in the present model resulted in moderate differences in terms of bone formation and graft resorption.

Chronic critical leg ischemia: revascularization of the isolated popliteal segment in comparison with femoro-distal bypass

Several patients with chronic critical limb ischemia show angiographically an isolated popliteal segment (IPS) and a single calf vessel (SCV) with no direct communication to the former. In this situation a bypass can be inserted from the common femoral artery to the IPS or to the SCV. The results of 73 bypass procedures--40 to an isolated popliteal segment and 33 to a single calf vessel for limb salvage--were prospectively evaluated. Eighty percent of the grafts were performed with an autogenous saphenous vein (ASV), the rest with a thin wall polytetrafluoroethylene (PTFE) prosthesis. The mean age of our patients was 75 years and many suffered from cardiovascular disease. The operative mortality rate was 3% and the mean postoperative survival 32 months. Three year patency and limb salvage rates for ASV grafts was 83% and 87% (IPS) respectively 77% and 76% (MCV); for PTFE grafts 58% and 88% (IPS) respectively 17% and 50% (MCV). There was no significant difference found in patency and limb salvage rates of the two procedures if the graft was an autogenous saphenous vein (p > 0.05). The PTFE prosthesis was only suitable for grafts inserted to the isolated popliteal segment.

Individual risk factors for Mycoplasma hyopneumoniae infections in suckling pigs at the age of weaning.

BACKGROUND In recent years, the occurrence and the relevance of Mycoplasma hyopneumoniae infections in suckling pigs has been examined in several studies. Whereas most of these studies were focused on sole prevalence estimation within different age groups, follow-up of infected piglets or assessment of pathological findings, none of the studies included a detailed analysis of individual and environmental risk factors. Therefore, the aim of the present study was to investigate the frequency of M. hyopneumoniae infections in suckling pigs of endemically infected herds and to identify individual risk factors potentially influencing the infection status of suckling pigs at the age of weaning. RESULTS The animal level prevalence of M. hyopneumoniae infections in suckling pigs examined in three conventional pig breeding herds was 3.6% (41/1127) at the time of weaning. A prevalence of 1.2% was found in the same pigs at the end of their nursery period. In a multivariable Poisson regression model it was found that incidence rate ratios (IRR) for suckling pigs are significantly lower than 1 when teeth grinding was conducted (IRR: 0.10). Moreover, high temperatures in the piglet nest during the first two weeks of life (occasionally >40°C) were associated with a decrease of the probability of an infection (IRR: 0.23-0.40). Contrary, the application of PCV2 vaccines to piglets was associated with an increased infection risk (IRR: 9.72). CONCLUSIONS Since single infected piglets are supposed to act as initiators for the transmission of this pathogen in nursery and fattening pigs, the elimination of the risk factors described in this study should help to reduce the incidence rate of M. hyopneumoniae infections and thereby might contribute to a reduced probability of high prevalences in older pigs.

Schmiede ─ Heiligtum ─ Wassermühle. Cham-Hagendorn (Kanton Zug) in römischer Zeit. Ausgrabungen 1944/45 und 2003/04

1944/1945 wurde in Cham-Hagendorn eine Wassermühle ausgegraben, die dank ihrer aussergewöhnlich guten Holzerhaltung seit langem einen prominenten Platz in der Forschung einnimmt. 2003 und 2004 konnte die Kantonsarchäologie Zug den Platz erneut archäologisch untersuchen. Dabei wurden nicht nur weitere Reste der Wassermühle, sondern auch Spuren älterer und jüngerer Anlagen geborgen: eine ältere und eine jüngere Schmiedewerkstatt (Horizont 1a/Horizont 3) sowie ein zweiphasiges Heiligtum (Horizonte 1a/1b). All diese Anlagen lassen sich nun in das in den neuen Grabungen erkannte stratigraphische Gerüst einhängen (s. Beil. 2). Dank der Holzerhaltung können die meisten Phasen dendrochronologisch datiert werden (s. Abb. 4.1/1a): Horizont 1a mit Schlagdaten zwischen 162(?)/173 und 200 n. Chr., Horizont 1b um 215/218 n. Chr. und Horizont 2 um 231 n. Chr. Ferner konnten in den neuen Grabungen Proben für mikromorphologische und archäobotanische Untersuchungen entnommen werden (Kap. 2.2; 3.11). In der vorliegenden Publikation werden der Befund und die Baustrukturen vorgelegt, (Kap. 2), desgleichen sämtliche stratifizierten Funde und eine umfassende Auswahl der 1944/1945 geborgenen Funde (Kap. 3). Dank anpassender Fragmente, sog. Passscherben, lassen sich diese zum Teil nachträglich in die Schichtenabfolge einbinden. Die mikromorphologischen und die archäobotanischen Untersuchungen (Kap. 2.2; 3.11) zeigen, dass der Fundplatz in römischer Zeit inmitten einer stark vom Wald und dem Fluss Lorze geprägten Landschaft lag. In unmittelbarer Nähe können weder eine Siedlung noch einzelne Wohnbauten gelegen haben. Die demnach nur gewerblich und sakral genutzten Anlagen standen an einem Bach, der vermutlich mit jenem Bach identisch ist, der noch heute das Groppenmoos entwässert und bei Cham-Hagendorn in die Lorze mündet (s. Abb. 2.4/1). Der antike Bach führte wiederholt Hochwasser ─ insgesamt sind fünf grössere Überschwemmungsphasen auszumachen (Kap. 2.2; 2.4). Wohl anlässlich eines Seehochstandes durch ein Überschwappen der Lorze in den Bach ausgelöst, müssen diese Überschwemmungen eine enorme Gewalt entwickelt haben, der die einzelnen Anlagen zum Opfer fielen. Wie die Untersuchung der Siedlungslandschaft römischer Zeit rund um den Zugersee wahrscheinlich macht (Kap. 6 mit Abb. 6.2/2), dürften die Anlagen von Cham-Hagendorn zu einer in Cham-Heiligkreuz vermuteten Villa gehören, einem von fünf grösseren Landgütern in diesem Gebiet. Hinweise auf Vorgängeranlagen fehlen, mit denen die vereinzelten Funde des 1. Jh. n. Chr. (Kap. 4.5) in Verbindung gebracht werden könnten. Diese dürften eher von einer der Überschwemmungen bachaufwärts weggerissen und nach Cham-Hagendorn eingeschwemmt worden sein. Die Nutzung des Fundplatzes (Horizont 1a; s. Beil. 6) setzte um 170 n. Chr. mit einer Schmiedewerkstatt ein (Kap. 2.5.1). Der Fundanfall, insbesondere die Schmiedeschlacken (Kap. 3.9) belegen, dass hier nur hin und wieder Geräte hergestellt und repariert wurden (Kap. 5.2). Diese Werkstatt war vermutlich schon aufgelassen und dem Verfall preisgegeben, als man 200 n. Chr. (Kap. 4.2.4) auf einer Insel zwischen dem Bach und einem Lorzearm ein Heiligtum errichtete (Kap. 5.3). Beleg für den sakralen Status dieser Insel ist in erster Linie mindestens ein eigens gepflanzter Pfirsichbaum, nachgewiesen mit Pollen, einem Holz und über 400 Pfirsichsteinen (Kap. 3.11). Die im Bach verlaufende Grenze zwischen dem sakralen Platz und der profanen Umgebung markierte man zusätzlich mit einer Pfahlreihe (Kap. 2.5.3). In diese war ein schmaler Langbau integriert (Kap. 2.5.2), der an die oft an Temenosmauern antiker Heiligtümer angebauten Portiken erinnert und wohl auch die gleiche Funktion wie diese gehabt hatte, nämlich das Aufbewahren von Weihegaben und Kultgerät (Kap. 5.3). Das reiche Fundmaterial, das sich in den Schichten der ersten Überschwemmung fand (s. Abb. 5./5), die um 205/210 n. Chr. dieses Heiligtum zerstört hatte, insbesondere die zahlreiche Keramik (Kap. 3.2.4), und die zum Teil auffallend wertvollen Kleinfunde (Kap. 3.3.3), dürften zum grössten Teil einst in diesem Langbau untergebracht gewesen sein. Ein als Glockenklöppel interpretiertes, stratifiziertes Objekt spricht dafür, dass die fünf grossen, 1944/1945 als Stapel aufgefundenen Eisenglocken vielleicht auch dem Heiligtum zuzuweisen sind (Kap. 3.4). In diesen Kontext passen zudem die überdurchschnittlich häufig kalzinierten Tierknochen (Kap. 3.10). Nach der Überschwemmung befestigte man für 215 n. Chr. (Kap. 4.2.4) das unterspülte Bachufer mit einer Uferverbauung (Kap. 2.6.1). Mit dem Bau eines weiteren, im Bach stehenden Langbaus (Kap. 2.6.2) stellte man 218 n. Chr. das Heiligtum auf der Insel in ähnlicher Form wieder her (Horizont 1b; s. Beil. 7). Von der Pfahlreihe, die wiederum die sakrale Insel von der profanen Umgebung abgrenzte, blieben indes nur wenige Pfähle erhalten. Dennoch ist der sakrale Charakter der Anlage gesichert. Ausser dem immer noch blühenden Pfirsichbaum ist es ein vor dem Langbau aufgestelltes Ensemble von mindestens 23 Terrakottafigurinen (s. Abb. 3.6/1), elf Veneres, zehn Matres, einem Jugendlichen in Kapuzenmantel und einem kindlichen Risus (Kap. 3.6; s. auch Kap. 2.6.3). In den Sedimenten der zweiten Überschwemmung, der diese Anlage um 225/230 n. Chr. zum Opfer gefallen war, fanden sich wiederum zahlreiche Keramikgefässe (Kap. 3.2.4) und zum Teil wertvolle Kleinfunde wie eine Glasperle mit Goldfolie (Kap. 3.8.2) und eine Fibel aus Silber (Kap. 3.3.3), die wohl ursprünglich im Langbau untergebracht waren (Kap. 5.3.2 mit Abb. 5/7). Weitere Funde mit sicherem oder möglichem sakralem Charakter finden sich unter den 1944/1945 geborgenen Funden (s. Abb. 5/8), etwa ein silberner Fingerring mit Merkurinschrift, ein silberner Lunula-Anhänger, eine silberne Kasserolle (Kap. 3.3.3), eine Glasflasche mit Schlangenfadenauflage (Kap. 3.8.2) und einige Bergkristalle (Kap. 3.8.4). Im Bereich der Terrakotten kamen ferner mehrere Münzen (Kap. 3.7) zum Vorschein, die vielleicht dort niedergelegt worden waren. Nach der zweiten Überschwemmung errichtete man um 231 n. Chr. am Bach eine Wassermühle (Horizont 2; Kap. 2.7; Beil. 8; Abb. 2.7/49). Ob das Heiligtum auf der Insel wieder aufgebaut oder aufgelassen wurde, muss mangels Hinweisen offen bleiben. Für den abgehobenen Zuflusskanal der Wassermühle verwendete man mehrere stehen gebliebene Pfähle der vorangegangenen Anlagen der Horizonte 1a und 1b. Obwohl die Wassermühle den 28 jährlichen Überschwemmungshorizonten (Kap. 2.2) und den Funden (Kap. 4.3.2; 4.4.4; 45) zufolge nur bis um 260 n. Chr., während gut einer Generation, bestand, musste sie mindestens zweimal erneuert werden – nachgewiesen sind drei Wasserräder, drei Mühlsteinpaare und vermutlich drei Podeste, auf denen jeweils das Mahlwerk ruhte. Grund für diese Umbauten war wohl der weiche, instabile Untergrund, der zu Verschiebungen geführt hatte, so dass das Zusammenspiel von Wellbaum bzw. Sternnabe und Übersetzungsrad nicht mehr funktionierte und das ganze System zerbrach. Die Analyse von Pollen aus dem Gehhorizont hat als Mahlgut Getreide vom Weizentyp nachgewiesen (Kap. 3.11.4). Das Abzeichen eines Benefiziariers (Kap. 3.3.2 mit Abb. 3.3/23,B71) könnte dafür sprechen, dass das verarbeitete Getreide zumindest zum Teil für das römische Militär bestimmt war (s. auch Kap. 6.2.3). Ein im Horizont 2 gefundener Schreibgriffel und weitere stili sowie eine Waage für das Wägen bis zu 35-40 kg schweren Waren aus dem Fundbestand von 1944/1945 könnten davon zeugen, dass das Getreide zu wägen und zu registrieren war (Kap. 3.4.2). Kurz nach 260 n. Chr. fiel die Wassermühle einem weiteren Hochwasser zum Opfer. Für den folgenden Horizont 3 (Beil. 9) brachte man einen Kiesboden ein und errichtete ein kleines Gebäude (Kap. 2.8). Hier war wohl wiederum eine Schmiede untergebracht, wie die zahlreichen Kalottenschlacken belegen (Kap. 3.9), die im Umfeld der kleinen Baus zum Vorschein kamen. Aufgrund der Funde (Kap. 4.4.4; 4.5) kann diese Werkstatt nur kurze Zeit bestanden haben, höchstens bis um 270 n. Chr., bevor sie einem weiteren Hochwasser zum Opfer fiel. Von der jüngsten Anlage, die wohl noch in römische Zeit datiert (Horizont 4; Beil. 10), war lediglich eine Konstruktion aus grossen Steinplatten zu fassen (Kap. 2.9.1). Wozu sie diente, muss offen bleiben. Auch der geringe Fundanfall spricht dafür, dass die Nutzung des Platzes, zumindest für die römische Zeit, allmählich ein Ende fand (Kap. 4.5). Zu den jüngsten Strukturen gehören mehrere Gruben (Kap. 2.9.2), die vielleicht der Lehmentnahme dienten. Mangels Funden bleibt ihre Datierung indes ungewiss. Insbesondere wissen wir nicht, ob sie noch in römische Zeit datieren oder jünger sind. Spätestens mit der fünften Überschwemmung, die zur endgültigen Verlandung führte und wohl schon in die frühe Neuzeit zu setzen ist, wurde der Platz aufgelassen und erst mit dem Bau der bestehenden Fensterfabrik Baumgartner wieder besetzt.

Long-term stability of contour augmentation in the esthetic zone: histologic and histomorphometric evaluation of 12 human biopsies 14 to 80 months after augmentation.

BACKGROUND Contour augmentation around early-placed implants (Type 2 placement) using autogenous bone chips combined with deproteinized bovine bone mineral (DBBM) and a collagen barrier membrane has been documented to predictably provide esthetically satisfactory clinical outcomes. In addition, recent data from cone beam computed tomography studies have shown the augmented volume to be stable long-term. However, no human histologic data are available to document the tissue reactions to this bone augmentation procedure. METHODS Over an 8-year period, 12 biopsies were harvested 14 to 80 months after implant placement with simultaneous contour augmentation in 10 patients. The biopsies were subjected to histologic and histomorphometric analysis. RESULTS The biopsies consisted of 32.0% ± 9.6% DBBM particles and 40.6% ± 14.6% mature bone. 70.3% ± 14.5% of the DBBM particle surfaces were covered with bone. On the remaining surface, multinucleated giant cells with varying intensity of tartrate-resistant acid phosphatase staining were regularly present. No signs of inflammation were visible, and no tendency toward a decreasing volume fraction of DBBM over time was observed. CONCLUSIONS The present study confirms previous findings that osseointegrated DBBM particles do not tend to undergo substitution over time. This low substitution rate may be the reason behind the clinically and radiographically documented long-term stability of contour augmentation using a combination of autogenous bone chips, DBBM particles, and a collagen membrane.

Enamel matrix derivative in combination with bone grafts: A review of the literature.

OBJECTIVE Over 15 years have passed since an enamel matrix derivative (EMD) was introduced as a biologic agent capable of periodontal regeneration. Histologic and controlled clinical studies have provided evidence for periodontal regeneration and substantial clinical improvements following its use. The purpose of this review article was to perform a systematic review comparing the eff ect of EMD when used alone or in combination with various types of bone grafting material. DATA SOURCES A literature search was conducted on several medical databases including Medline, EMBASE, LILACS, and CENTRAL. For study inclusion, all studies that used EMD in combination with a bone graft were included. In the initial search, a total of 820 articles were found, 71 of which were selected for this review article. Studies were divided into in vitro, in vivo, and clinical studies. The clinical studies were subdivided into four subgroups to determine the eff ect of EMD in combination with autogenous bone, allografts, xenografts, and alloplasts. RESULTS The analysis from the present study demonstrates that while EMD in combination with certain bone grafts is able to improve the regeneration of periodontal intrabony and furcation defects, direct evidence supporting the combination approach is still missing. CONCLUSION Further controlled clinical trials are required to explain the large variability that exists amongst the conducted studies.

Bar Kochba : opera

by A. Goldfaden. Arr. for violin by Henry A. Russotta

Bar Kochba

Ausw. Arr. [[Elektronische Ressource]] : Bd. 8

Two pre-treatments for bonding to non-carious cervical root dentin

Purpose: To investigate the effect of airborne-particle abrasion or diamond bur preparation as pretreatment steps of non-carious cervical root dentin regarding substance loss and bond strength. Methods: 45 dentin specimens produced from crowns of extracted human incisors by grinding the labial surfaces with silicon carbide papers (control) were treated with one of three adhesive systems (Group 1A-C; A: OptiBond FL, B: Clearfil SE Bond, or C: Scotchbond Universal; n=15/adhesive system). Another 135 dentin specimens (n=15/group) produced from the labial, non-carious cervical root part of extracted human incisors were treated with one of the adhesive systems after either no pre-treatment (Group 2A-C), pre-treatment with airborne-particle abrasion (CoJet Prep and 50 µm aluminum oxide powder; Group 3A-C), or pre-treatment with diamond bur preparation (40 µm grit size; Group 4A-C). Substance loss caused by the pre-treatment was measured in Groups 3 and 4. After treatment with the adhesive systems, resin composite was applied and all specimens were stored (37°C, 100% humidity, 24 hours) until measurement of microshear bond strength (µSBS). Data were analyzed with a nonparametric ANOVA followed by Kruskal-Wallis and Wilcoxon rank sum tests (level of significance: alpha=0.05). Results: Overall substance loss was significantly lower in Group 3 (median: 19 µm) than in Group 4 (median: 113 µm; p<0.0001). There were no significant differences in µSBS between the adhesive systems (A-C) in Group 1, Group 3, and Group 4 (p>=0.133). In Group 2, OptiBond FL (Group 2A) and Clearfil SE Bond (Group 2B) yielded significantly higher µSBS than Scotchbond Universal (Group 2C; p<=0.032). For OptiBond FL and Clearfil SE Bond, there were no significant differences in µSBS between the ground crown dentin and the non-carious cervical root dentin regardless of any pre-treatment of the latter (both p=0.661). For Scotchbond Universal, the µSBS to non-carious cervical root dentin without pre-treatment was significantly lower than to ground crown dentin and to non-carious cervical root dentin pre-treated with airborne-particle abrasion or diamond bur preparation p<=0.014).

ATXA -dependent gene expression in Bacillus anthracis

The Bacillus anthracis toxin genes, cya, lef , and pag, can be viewed as a regulon, in which transcription of all three genes is activated in trans by the same regulatory gene, atxA, in response to the same signal, CO2. I determined that several phenotypes are associated with the atxA gene. In addition to being toxin-deficient, an atxA -null mutant grows poorly on minimal media and sporulates early compared to the parent strain. Furthermore, an atxA-null mutant has an altered 2-D gel protein profile. I used a genetic approach to find additional atxA-regulated genes. Random transcriptional lacZ fusions were generated in B. anthracis using transposon Tn 917-LTV3. Transposon-insertion libraries were screened for mutants expressing increased β-galactosidase activity in 5% CO2. Introduction of an atxA-null mutation in these mutants revealed that 79% of the CO2-regulated fusions were also atxA-dependent. DNA sequence analysis of transposon insertion sites in mutants carrying CO 2/atxA-regulated fusions revealed ten mutants harboring transposon insertions in loci distinct from the toxin genes. The majority of the tcr (toxin co-regulated) loci mapped within the pXO1 pathogenicity island. These results indicate a clear association of atxA with CO2-enhanced gene expression in B. anthracis and provide evidence that atxA regulates genes other than the structural genes for the anthrax toxin proteins. ^ Characterization of one tcr locus revealed a new regulatory gene, pagR. The pagR gene (300 nt) is located downstream of pag. pagR is cotranscribed with pag and is responsible for autogenous control of the operon. pagR also represses expression of cya and lef. Repression of toxin gene expression by pagR may be mediated by atxA. The steady state level of atxA mRNA is increased in a pagR mutant. Recombinant PagR protein purified from Escherichia coli did not specifically bind the promoter regions of pagA or atxA. An unidentified factor in B. anthracis crude extracts, however, was able to bind the atxA promoter in the absence of PagR or AtxA. These investigations increase our knowledge of virulence regulation in B. anthracis and ultimately will lead to a better understanding of anthrax disease. ^

Deep drilling of glaciers: Russian projects in the Arctic (1975-1995)

The data collection "Deep Drilling of Glaciers: Soviet-Russian projects in Arctic, 1975-1995" was collected by the following basic considerations: - compilation of deep (>100 m) drilling projects on Arctic glaciers, using data of (a) publications; (b) archives of IGRAN; (c) personal communication of project participants; - documentation of parameters, references. Accuracy of data and techniques applied to determine different parameters are not evaluated. The accuracy of some geochemical parameters (up to 1984 and heavy metalls) is uncertain. Most reconstructions of ice core age and of annual layer thickness are discussed; - digitizing of published diagrams (in case, when original numerical data were lost) and subsequent data conversion to equal range series and adjustment to the common units. Therefore, the equal-range series were calculated from original data or converted from digitized chart values as indicated in the metadata. For the methodological purpose, the equal-range series obtained from original and reconstructed data were compared repeatedly; the systematic difference was less then 5-7%. Special attention should be given to the fact, that the data for individual ice core parameters varies, because some parameters were originally measured or registered. Parameters were converted in equal-range series using 2 m steps; - two or more parameter values were determined, then the mean-weighted (i.e. accounting the sample length) value is assigned to the entire interval; - one parameter value was determined, measured or registered independently from the parameter values in depth intervals which over- and underlie it, then the value is assigned to the entire interval; - one parameter value was determined, measured or registered for two adjoining depth intervals, then the specific value is assigned to the depth interval, which represents >75% of sample length ; if each of adjoining depth intervals represents <75% of sample length, then the correspondent parameter value is assigned to both intervals of depth. This collection of ice core data (version 2000) was made available through the EU funded QUEEN project by S.M. Arkhipov, Moscow.

Estudio de seguridad y salud para la construcción de una planta de molienda de clinker

El proyecto tiene por objeto establecer, en el marco de la Ley 31/1995, de 8 de noviembre, sobre prevención de riesgos laborales, y en su norma reglamentaria, el Real Decreto 1627/1997 de 24 de octubre, sobre disposiciones mínimas de seguridad y salud en las obras de construcción, la identificación y evaluación de riesgos de una planta industrial de molienda de clinker para fabricación de cemento, con objeto de determinar las medidas preventivas necesarias para garantizar las adecuadas condiciones de seguridad y salud de los trabajadores que intervengan en la construcción de la obra civil, y en los montajes eléctrico y mecánico. La metodología que se empleó para estimar los niveles de riesgo se basa en la conjunción de la probabilidad estimada y las consecuencias esperadas. Los resultados obtenidos a partir de los niveles de riesgo identificados demostraron que mediante la mejora de los controles existentes y la implantación de nuevas medidas de control, priorizando de forma que éstas siempre sean proporcionales al riesgo identificado y valorado, es posible garantizar los adecuados niveles de seguridad y salud durante la ejecución de la obra. ABSTRACT The main objective of this project is, in the frame of the Law 31/1995 of November 8th about prevention of labor risks and in its regulation norm, Royal Decree 1627/1997 of October 24th, about minimum dispositions of safety and health in the works of construction, the identification and evaluation of the risks involved in an industrial plant of grinding of clinker for cement manufacture in order to determine the preventive necessary measures to ensure the suitable conditions of safety and health of the workers who take part of civil works, and of electrical and mechanical erections. The methodology chosen to estimate the risk levels is based on the probability of happening together with the awaited consequences. The results obtained from the levels of risk identified demonstrated that by means of the improvement of the existing controls and the implementation of new control measures, determining priorities always proportionally to the identified and valued risk, it is possible to guarantee the suitable levels of safety and health during the execution of the works.

Novel system for bite-force sensing and monitoring based on magnetic eear field communication

Intraoral devices for bite-force sensing have several applications in odontology and maxillofacial surgery, as bite-force measurements provide additional information to help understand the characteristics of bruxism disorders and can also be of help for the evaluation of post-surgical evolution and for comparison of alternative treatments. A new system for measuring human bite forces is proposed in this work. This system has future applications for the monitoring of bruxism events and as a complement for its conventional diagnosis. Bruxism is a pathology consisting of grinding or tight clenching of the upper and lower teeth, which leads to several problems such as lesions to the teeth, headaches, orofacial pain and important disorders of the temporomandibular joint. The prototype uses a magnetic field communication scheme similar to low-frequency radio frequency identification (RFID) technology (NFC). The reader generates a low-frequency magnetic field that is used as the information carrier and powers the sensor. The system is notable because it uses an intra-mouth passive sensor and an external interrogator, which remotely records and processes information regarding a patient?s dental activity. This permits a quantitative assessment of bite-force, without requiring intra-mouth batteries, and can provide supplementary information to polysomnographic recordings, current most adequate early diagnostic method, so as to initiate corrective actions before irreversible dental wear appears. In addition to describing the system?s operational principles and the manufacture of personalized prototypes, this report will also demonstrate the feasibility of the system and results from the first in vitro and in vivo trials.

Factores nutricionales que influyen sobre las variables productivas y el desarrollo del tracto gastrointestinal en pollitas comerciales rubias = Nutritional factors affecting productive performance and gastrointestinal tract traits in commercial brown-egg laying pullets

El objetivo general de esta Tesis doctoral fue estudiar la influencia de diversos factores nutricionales sobre los parámetros productivos y el desarrollo del tracto digestivo de pollitas rubias destinadas a la producción de huevos comerciales. Para alcanzar este objetivo se realizaron tres experimentos donde se estudió el cereal principal, el tamaño de partícula del cereal y el nivel de energía y la presentación de los piensos. En el experimento 1 se estudió la influencia del cereal (piensos con enzimas) y la presentación del pienso sobre los parámetros productivos y las características del tracto digestivo en 576 pollitas rubias de 1 a 120 d de edad. De 1 a 45 d de la edad, se utilizaron 4 piensos experimentales organizados de forma factorial con 2 cereales al 50% de inclusión (maíz vs. trigo) y 2 presentaciones del pienso (harina vs. gránulo de 2- mm de diámetro). Cada tratamiento se replicó 6 veces (24 pollitas por réplica). De 46 a 120 d de edad todas las dietas (maíz o trigo) se ofrecieron en harina y por tanto, la única diferencia entre tratamientos fue el cereal utilizado. De 1 a 120 d de edad, las pollitas que recibieron los piensos basados en maíz tuvieron una ganancia de peso vivo (PV) superior (P < 0,05) que las que recibieron los piensos basados en trigo, pero el índice de conversión (IC) fue similar para ambos grupos. De 1 a 45 d de edad, las pollitas alimentadas con gránulo consumieron más pienso (P < 0,001) y tuvieron una ganancia de peso superior (P < 0,001) que las pollitas alimentadas con harina. Gran parte de los efectos beneficiosos de la granulación sobre los parámetros productivos se mantuvieron al final de la prueba (120 d de edad). A los 45 d de edad, el peso relativo de la molleja (PR; g/kg PV) fue superior (P < 0,01) en pollitas alimentadas con maíz que en pollitas alimentadas con trigo. La alimentación en gránulo redujo el PR del tracto gastro intestinal (TGI) y de la molleja (P < 0,001), así como la longitud relativa (LR; cm/kg PV) del intestino delgado (P< 0.01) a ambas edades (45 y 120 d de edad). El tipo de cereal utilizado no afectó al pH del contenido de la molleja a 120 d de edad pero fué inferior (P < 0,01) en las pollitas que recibieron el pienso en harina de 1 a 45 d de la edad que en las que recibieron el pienso en gránulo. Se concluye que el trigo puede substituir al maíz en piensos para pollitas si se acepta una ligera reducción en la ganancia de peso. Asímismo, la alimentación en gránulo de 1 a 45 d de edad aumentó la ganancia de peso a esta edad y al final de la prueba, así como el pH de la molleja a 120 d de edad. La presentación del pienso en gránulo redujo el PR de la molleja y la LR del TGI a 120 d de edad. En el experimento 2 se utilizaron un total de 864 pollitas rubias Hy-Line de 1 d de edad para estudiar la influencia del cereal de la dieta (500 g de maíz o trigo/kg) y el tamaño de partícula del mismo (molienda con molino de martillos con un diámetro de criba de 6, 8, o 10-mm) sobre los parámetros productivos y las características del TGI de 1 a 120 d de edad. Cada uno de los 6 tratamientos se replicó 6 veces (24 pollitas por réplica). De 1 a 45 d de edad, la ganancia de PV aumentó (P< 0,001) y el IC se mejoró (P < 0,05) al reducir el tamaño de partícula del cereal, pero no se observaron diferencias en el periodo crecimiento de 45 a 120 d de edad. A los 45 d de vida, las pollitas alimentadas con maíz tendieron (P < 0,10) a tener un mayor PR del TGI y del proventrículo y una mayor LR del intestino delgado que las pollitas alimentadas con trigo. Asímismo, el PR del TGI a esta edad, aumentó (P < 0,05) a medida que aumentaba el tamaño de partícula del cereal utilizado. A los 120 d de edad, el tratamiento no afectó el PR de ninguno de los órganos del TGI ni al pH de la molleja. Sin embargo, la LR del intestino delgado fue superior (P < 0,05) para las pollitas alimentadas con trigo que para las pollitas alimentadas con maíz. La LR del TGI se redujó (P < 0,05) al aumentar el tamaño de partícula del cereal. Se concluye que el trigo puede incluirse 500 g/kg en piensos de pollitas de 1 a 120 días de edad y que el tamaño de partícula de los cereales afecta el crecimiento de las pollitas durante los primeros 45 d de vida, pero no después. Por lo tanto, se recomienda moler el cereal utilizado al inicio del período de recría (1 a 45 d de edad) con una criba de diámetro igual o inferior a 8 mm. En el experimento 3 se utilizaron un total de 1.152 pollitas rubias Hy-Line de 1 d de edad para estudiar la influencia del nivel de energía de la dieta y la presentación del pienso sobre la productividad y las características del TGI. De 1 a 45 d de edad se utilizaron 6 piensos organizados de forma factorial con 3 concentraciones energéticas (baja: 11,44 MJ; media: 12,05 MJ y alta: 12,66 MJ/kg) y 2 presentaciones del pienso (harina vs. gránulo). De 45 a 120 d todos los piensos experimentales se suministraron en forma de harina y por tanto, la única diferencia entre tratamientos fue el nivel de EMAn utilizado. Cada uno de los 6 tratamientos se replicó 8 veces y la unidad experimental fue la jaula con 24 pollitas. De 1 a 120 d de edad, la ganancia de PV y el IC mejoraron a medida que aumentó la EMAn del pienso (P < 0,001). Las pollitas alimentadas con gránulo de 1 a 45 d de edad comieron mas y tuvieron una ganancia de peso superior (P < 0,001) que las alimentadas con harina. En el global de la prueba, la ganancia de PV fue mayor (P < 0,01) para las pollitas alimentadas con piensos en gránulo. A los 45 d de edad, el PR de todos los segmentos del TGI estudiados fue inferior para las pollitas alimentadas con piensos de alta energía que para las pollitas alimentadas con piensos de media o baja energía. A 120 d de edad, el PR de la molleja fue superior (P < 0,01) para las pollitas alimentadas con piensos de baja energía que con los otros piensos. Sin embargo, la LR del TGI no se vió afectada por el nivel de energía de los piensos. A los 45 d de edad, la alimentación con gránulo redujo el PR del proventrículo (P < 0,05), de la molleja (P < 0,001) y del TGI (P < 0.001), así como la LR del intestino delgado (P < 0,05) y de los ciegos (P < 0,001). A pesar de que las pollitas solo recibieron los piensos en gránulo durante los primeros 45 d de vida, la alimentación con gránulos redujo el PR de la molleja y del proventrículo a 120 d de edad. Se concluye que la alimentación con gránulos durante los primeros 45 d de vida mejora el consumo de pienso y el PV de las pollitas a 120 d de edad. Un aumento del nivel de energía de la dieta de 12,0 a 12,7 MJ/kg mejora los parámetros productivos de 1 a 120 d de edad pero reduce el tamaño del proventrículo y de la molleja. En base de estos resultados concluimos que maíz y trigo con enzimas pueden utilizarse indistintamente en piensos para pollitas de 1 a 120 d de edad con sólo una ligera disminución del PV final con trigo. La granulación y la reducción del tamaño de partícula del cereal del pienso de primera edad (1 a 45 d de vida) y el uso de piensos de alta densidad energética, mejoran los PV a 120 d de edad. Por lo tanto, es recomendable moler los cereales con cribas de no más de 8-mm de diámetro. También, la granulación del pienso y el uso de piensos de alta energía (pobres en fibra bruta) pueden reducir el desarrollo del TGI especialmente de la molleja, lo que puede perjudicar el consumo posterior de pienso durante el inicio del ciclo de puesta. ABSTRACT The general objective of this Thesis was to study the effect of different nutritional factors on productive performance and the development of the gastrointestinal tract (GIT) of commercial brown egg-laying pullets from 1 to 120 d of age. In this respect, the influence of type and particle size of the cereal, and feed form, and energy content of the die,t were studied in 3 experiments. In experiment 1, the influence of the main cereal and feed form of the diet on performance and GIT traits was studied in 576 brown-egg laying pullets from 1 to 120 d of age. From 1 to 45 d of age, 4 diets arranged factorially with 2 cereals (maize vs. wheat) and 2 feed forms (mash vs. pellets) were used. Each treatment was replicated 6 times (24 pullets per replicate). From 46 to 120 d of age, all diets were offered in mash form and therefore, the only difference among diets was the cereal used. Cumulatively, pullets fed the maize diets had higher body weight (BW) gain (P< 0.05) but similar feed conversion ratio (FCR) than pullets fed the wheat diets. From 1 to 45 d of age, pullets fed pellets consumed more feed (P < 0.001) and had higher BW gain (P < 0.001) than pullets fed mash. Most of the beneficial effects of pelleting on productive performance of the birds were still evident at 120 d of age. At 45 d of age, gizzard relative weight (RW; g/kg BW) was higher (P < 0.01) in pullets fed maize than in pullets fed wheat. Feeding pellets reduced the RW of the GIT and the gizzard (P < 0.001) as well as the relative length (RL; cm/kg BW) of the small intestine (SI, P < 0.01) at both ages. The pH of the gizzard contents at 120 d of age was not affected by the main cereal of the diet, but was lower in pullets fed mash from 1 to 45 d of age (P < 0.01) than in pullets fed pellets. We conclude that wheat supplemented with enzymes can be used in substitution of maize in pullet diets with only a slight reduction in BW gain at 120 d of age. Also, feeding pellets from 1 to 45 d of age increased BW gain and pH of the gizzard, and reduced the RW of the gizzard and the RL of the GIT at 120 d of age. In experiment 2, a total of 864 brown-egg laying pullets was used to study the effects of the main cereal of the diet (500 g maize or wheat/kg) and particle size of the cereal (hammer milled to pass through a 6, 8, and 10-mm screen) on growth performance and GIT traits from 1 to 120 d of age. Each of the 6 treatments was replicated 6 times (24 pullets per replicate). Type of cereal did not affect pullet performance at any age. From 1 to 45 d of age, BW gain was increased (P < 0.001) and FCR was improved (P < 0.05) as the particle size of the cereal was reduced, but no effects were observed after this age. At 45 d of age, pullets fed maize tended (P < 0.10) to have a heavier RW of the GIT and proventriculus and a higher relative length (RL, cm/kg BW) of the SI than pullets fed wheat. Also at this age, the RW of the GIT increased (P < 0.05) with increases in particle size of the cereal. At 120 d of age, dietary treatment did not affect the RW of any of the organs studied or gizzard pH, but the RL of the SI was higher (P < 0.05) for pullets fed wheat than for pullets fed maize. Also, the RL of the SI was reduced (P < 0.05) as the particle size of the cereal increased. We conclude that 500 g wheat/kg can be included in pullet feeds from 1 to 120 d of age, and that particle size of the cereal affects pullet performance during the first 45 d of life but not thereafter. Therefore, it is recommended to grind the cereal used in this period with a screen size of no more than 8-mm. In experiment 3, a total of 1,152 one-day-old Hy-Line Brown egg laying pullets were used to study the influence of the energy content of the diet and feed form on productive performance and on several GIT traits. From 1 to 45 d of age, there were 6 diets arranged factorially with 3 concentrations of AMEn (low: 11.66 MJ/kg, medium: 12.05 MJ/kg and high: 12.66 MJ/kg) of the diet and 2 feed forms (mash vs. pellets). From 45 to 120 d all diets were fed in mash form and therefore, the only difference among treatments in this period was the energy content of the diets. Each of the 6 treatments was replicated 8 times and the experimental unit was formed by 24 pullets. Cumulatively, BW gain and FCR improved as the AMEn of the diet increased (P < 0.001). Also, pullets fed pellets from 1 to 45 d of age had higher feed intake and BW gain (P < 0.001) in this period and higher cumulative BW gain (P < 0.01) than pullets fed mash. At 45 d of age, the RWof all the segments of the GIT was lower for pullets fed the high- than for pullets fed the medium- or low- energy diets. At 120 d of age, the RW of the gizzard was higher (P < 0.01) for pullets fed the low energy diets than for pullets fed the other diets. However, the RL of the GIT was not affected by the energy content of the diet. Feeding pellets reduced the RW of the proventriculus (P < 0.05), gizzard (P < 0.001), and GIT (P < 0.001), as well as the RL of the small intestine (P < 0.05) and the ceaca (P < 0.001) at 45 d of age. The effects of feeding pellets on RW of gizzard and proventriculus were still evident at 120 d of age. We concluded that feeding pellets from 1 to 45 d of age improved feed intake and BW of pullets at 120 d of age and that an increase in the energy content of the diet increased pullet performance at all ages but reduced the RW of the proventriculus and gizzard. We conclude that maize and wheat can be used indistinctly in diets for egg laying pullets from 1 to 120 d of age, with only a slight reduction in final BW when wheat is used. Also, particle size of the cereal affects pullet performance during the first 45 d of life but not thereafter. Pelleting of the feeds, and grinding the cereal with a screen size of no more than 8-mm from 1 to 45 d of age, and the use of high density energy diets are recommended in order to achieve adequate target BW at 120 d of age. However, pelleting of the feed, very fine grinding, and the use of high AMEn diets might hinder the development of the GIT, especially that of the gizzard, which might affect feed intake of laying hens especially at the beginning of the production cycle.