Armazenamento de sementes de doviális (Dovyalis caffra)

O trabalho foi desenvolvido com o objetivo de avaliar os efeitos do tempo e ambiente de armazenamento na emergência de plântulas de doviális (Dovyalis caffra), espécie frutífera arbustiva de sementes recalcitrantes. Foi adotado o delineamento experimental inteiramente casualizado, em esquema fatorial 3 x 5, correspondendo às condições ambientais de armazenamento: câmara seca (18±2ºC e 60% de UR), em condição ambiente (sem controle) e em câmara fria (10±2ºC e 70% de UR); e aos períodos de armazenamento 0; 7; 14; 21 e 28 dias. Esses efeitos foram avaliados para o cálculo da percentagem de emergência (%E) e índice de velocidade de emergência (IVE). Os ambientes de armazenamento não exerceram efeito estatístico significativo nas variáveis estudadas, diferentemente dos períodos de armazenamento, onde as mais altas %E e IVE foram observadas ao 14º dia de armazenamento. A partir do 14º dia de armazenamento, ocorreu uma redução na %E e IVE.

Estaquia como processo de clonagem do bacuripari (Redhia gardneriana Miers ex Planch e Triana)

No Brasil, existem diversas fruteiras nativas com potencial de exploração comercial, especialmente na Amazônia, local de origem do bacuripari. Neste sentido, realizou-se um trabalho com o objetivo de avaliar a clonagem dessa espécie pelo processo da estaquia, mediante uso de ácido indolil-3-butírico (AIB), em condições de nebulização intermitente. O delineamento experimental foi o inteiramente casualizado, com 5 tratamentos, caracterizados pelas concentrações de AIB (0; 1.000; 3.000; 5.000 e 7.000 mg.L-1), com 4 repetições e 10 estacas por parcela. Foram avaliados na porcentagem de estacas enraizadas, o número médio de folhas e o comprimento de raízes. O uso de AIB não influenciou na porcentagem de enraizamento.

Dormência e desenvolvimento de sementes de sabiá (Mimosa caesalpiniifolia Benth.)

O objetivo desta pesquisa foi estudar o estabelecimento da dormência nas sementes de sabiá (Mimosa caesalpiniifolia Benth.) durante o processo de maturação. Foram realizadas 16 colheitas semanais de frutos e sementes, na localidade de Engenho Bujari, município de Areia, PB, no período de 9 de agosto a 22 de novembro de 2001. As colheitas ocorreram aos 105 dias após a antese (d.a.a.) e se estenderam até os 210 d.a.a., sendo avaliadas as porcentagens de germinação, sementes dormentes, vigor (primeira contagem de germinação, comprimento e massas fresca e seca das plântulas). Concluiu-se que a colheita deverá ser efetuada aos 154 d.a.a., quando a germinação se apresenta com aproximadamente 80% e o acúmulo de massa seca nas sementes atinge o máximo

Germinação de sementes de Mimosa caesalpiniaefolia Benth. em diferentes substratos e temperaturas

A Mimosa caesalpiniaefolia Benth. é uma espécie nativa da região Nordeste, que vem sendo progressivamente cultivada do Maranhão ao Rio de Janeiro. A planta apresenta grande potencial para arborização, cerca viva e produção de madeira. O presente trabalho teve como objetivo definir o tipo de substrato, a temperatura, o tempo médio e a frequência relativa de germinação, para auxiliar a condução de testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia. Para tanto, realizou-se um experimento no Laboratório de Análise de Sementes do CCA-UFPB, em Areia-PB, em delineamento inteiramente casualizado com os tratamentos distribuídos em esquema fatorial 4x4, com os fatores temperaturas (20, 25, 30ºC constantes e 20-30ºC alternadas) e substratos (entre papel, sobre papel, entre areia e entre vermiculita), em quatro repetições de 25 sementes. Foram analisados os seguintes parâmetros: porcentagem de germinação e de plântulas anormais, primeira contagem da germinação e velocidade de germinação, tempo médio e frequência relativa de germinação, massa fresca e massa seca de plântulas. A temperatura de 25ºC mostrou-se mais adequada para a condução dos testes de germinação e vigor em sementes de Mimosa caesalpiniaefolia, independentemente do substrato utilizado. O substrato entre papel foi o mais apropriado para avaliação da qualidade fisiológica das sementes e a sincronização do processo germinativo foi maior no substrato entre papel, independentemente da temperatura empregada.

Rendimento e qualidade fisiológica de sementes de coentro cultivado com adubação orgânica e mineral

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produção e qualidade fisiológica de sementes de coentro em função de doses de nitrogênio

O objetivo dessa pesquisa foi avaliar o rendimento e a qualidade de sementes de coentro, cultivar Verdão, em função de doses de nitrogênio. Um experimento de campo foi instalado no Centro de Ciências Agrárias da Universidade Federal da Paraíba (CCA-UFPB), em Areia-PB, no período de abril a novembro de 2001, para avaliar a produção de sementes. Os tratamentos consistiram em cinco doses de nitrogênio (0, 20, 40, 60 e 80kg.ha-1) distribuídas em delineamento experimental de blocos casualizados, em quatro repetições. Após as colheitas, as sementes foram avaliadas quanto à qualidade fisiológica (germinação e índice de velocidade de germinação). O rendimento de sementes aumentou com a elevação das doses de nitrogênio, na ordem de 4,7kg.ha-1 a cada quilograma de nitrogênio adicionado ao solo, sendo o rendimento máximo de sementes (1900kg.ha-1), obtido na dose de 80kg.ha-1. A germinação máxima estimada (82%) foi obtida com a dose de 53kg.ha-1 de nitrogênio, enquanto o índice de velocidade de germinação aumentou com a elevação das doses de nitrogênio, sendo verificado um índice de 5,6 na dose máxima de nitrogênio.

Atributos do solo sob pastagens em sistema de sequeiro e irrigado

A pecuária é uma das atividades econômicas mais importantes da região do cerrado, sendo que o sucesso dessa atividade é dependente do sistema de manejo e de gramíneas forrageiras adaptadas às condições edafoclimáticas da região. Objetivou-se, neste tabalho, avaliar os atributos do solo em áreas sob pastagens com capim-Tanzânia (Panicum maximum Jacq. cv. Tanzânia) e braquiarão [Brachiaria brizantha (Hochst ex A. Rich.) Stapf. cv. Marandu], em sistema de sequeiro e irrigado no município de Rio Verde, GO. O experimento foi instalado no Centro Tecnológico Comigo, em um Latossolo Vermelho-Amarelo Distrófico típico, em 16 parcelas com 450m² cada. Adotou-se o delineamento em blocos completamente casualisados, referindo-se aos quatro tratamentos: capim-Tanzânia e braquiarão com e sem irrigação, com quatro repetições. Foram realizadas análises de atributos físicos (estabilidade de agregados) e químicas (pH, cálcio, magnésio, potássio, fósforo, acidez potencial, capacidade de troca catiônica, saturação por bases e conteúdo de matéria orgânica). Os atributos químicos variaram em ambas as profundidades, decorrentes principalmente da ação da calagem e adubação do solo independente da ausência ou presença de irrigação. Os tratamentos com capim-Tanzânia e braquiarão sem irrigação apresentaram os maiores teores de matéria orgânica e tiveram os maiores valores do diâmetro médio geométrico (DMG). A maior porcentagem dos agregados ficou retida na peneira de > 2,0mm de malha. A irrigação não afetou a produção de massa seca do capim-Tanzânia e braquiarão.

Um estudo da aplicação do conceito de risco na conscientização e conhecimento de estudantes de ensino técnico sobre riscos de segurança e saúde ocupacional em laboratório de soldagem

This dissertation presents a discussion on the level of risk awareness of students who have welding practice in the laboratories at CEFET/PI, both in Teresina and Floriano. Its main goal is to investigate risk factors involving students, teachers and employees that work in these laboratories. It s an empirical survey, held among a certain amount of students from the course in Mechanic Technology. For data analysis, the concept of risk was compared to the students direct measure of perception. The main results suggest the students must be better informed, more risk aware and more competent, in order to avoid accidents. They also point to a strong need for a more formal and effective performance to assure full consciousness about the risks involving the welding practice.

Avaliação de desempenho em mercados reguladores de transporte urbano por ônibus :proposição de um modelo aplicável ao caso de Natal

Increased competition in the market of urban transport, characteristic of the Brazilian cities from years 90, has required actions of the managing agencies to ensure the universality of service, enhancing efficiency and consumer welfare. It grows in the Brazilian municipalities, the need to adopt a systematic performance evaluation in terms of management system of indicators and targets appropriate to the regulatory context, which has the purpose of evaluating the accomplishment and compliance by dealers, of the services granted during the contract period, marked by increasingly long periods. The introduction of an index operational performance in permission contracts/concession in urban buses is intended to establish a regulatory performance, giving the contract a pro-competitive feature and to allow the managing agency the systematic and continuous monitoring of the performance of the delegated service to avoid major deviations from desired performance. A performance assessment model of public transportation companies by bus, and applicable to the case of Natal is proposed. Sought to add the particularities found in the transport system in order to assess the performance of enterprises, contribute to improving the service quality to the population and enable decision-makers a detailed knowledge of the behavior of the licensees

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Otimização dos parâmetros de monopolos planares de microfita para aplicações em sistemas de banda ultra larga

This work presents a theoretical and experimental investigation about the properties of microstrip antennas for ultra-wideband systems. Configurations of elliptic monopoles with different eccentricities and circular monopoles are considered. Two prototypes for each antenna configuration were built, one with the typical microstrip configuration and the other is similar to the first, except for a small aperture in the ground plane. Therefore, this work proposes to modify the configuration of the ground plane of the monopoles designed adding a rectangular stub, in order to optimize and improve the performance of such structures. The obtained results show that the introduction of that rectangular aperture in the ground plane allows an improvement of the frequency response for the considered antenna propotypes. It is observed a good agreement between the measured and simulated results. Finally, some proposals for future works are presented

Análise e projeto de superfícies seletivas de frequência com elementos pré-fractais para aplicações em comunicações indoor

In this thesis, a frequency selective surface (FSS) consists of a two-dimensional periodic structure mounted on a dielectric substrate, which is capable of selecting signals in one or more frequency bands of interest. In search of better performance, more compact dimensions, low cost manufacturing, among other characteristics, these periodic structures have been continually optimized over time. Due to its spectral characteristics, which are similar to band-stop or band-pass filters, the FSSs have been studied and used in several applications for more than four decades. The design of an FSS with a periodic structure composed by pre-fractal elements facilitates the tuning of these spatial filters and the adjustment of its electromagnetic parameters, enabling a compact design which generally has a stable frequency response and superior performance relative to its euclidean counterpart. The unique properties of geometric fractals have shown to be useful, mainly in the production of antennas and frequency selective surfaces, enabling innovative solutions and commercial applications in microwave range. In recent applications, the FSSs modify the indoor propagation environments (emerging concept called wireless building ). In this context, the use of pre-fractal elements has also shown promising results, allowing a more effective filtering of more than one frequency band with a single-layer structure. This thesis approaches the design of FSSs using pre-fractal elements based on Vicsek, Peano and teragons geometries, which act as band-stop spatial filters. The transmission properties of the periodic surfaces are analyzed to design compact and efficient devices with stable frequency responses, applicable to microwave frequency range and suitable for use in indoor communications. The results are discussed in terms of the electromagnetic effect resulting from the variation of parameters such as: fractal iteration number (or fractal level), scale factor, fractal dimension and periodicity of FSS, according the pre-fractal element applied on the surface. The analysis of the fractal dimension s influence on the resonant properties of a FSS is a new contribution in relation to researches about microwave devices that use fractal geometry. Due to its own characteristics and the geometric shape of the Peano pre-fractal elements, the reconfiguration possibility of these structures is also investigated and discussed. This thesis also approaches, the construction of efficient selective filters with new configurations of teragons pre-fractal patches, proposed to control the WLAN coverage in indoor environments by rejecting the signals in the bands of 2.4~2.5 GHz (IEEE 802.11 b) and 5.0~6.0 GHz (IEEE 802.11a). The FSSs are initially analyzed through simulations performed by commercial software s: Ansoft DesignerTM and HFSSTM. The fractal design methodology is validated by experimental characterization of the built prototypes, using alternatively, different measurement setups, with commercial horn antennas and microstrip monopoles fabricated for low cost measurements

Análise de antenas utilizando substrato cerâmico, zpt, produzido por síntese auto propagante para aplicações em sistemas de micro-ondas

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Análise de um controlador baseado no Jacobiano estimado da planta através de uma rede neural

This work presents an analysis of the control law based on an indirect hybrid scheme using neural network, initially proposed for O. Adetona, S. Sathanathan and L. H. Keel. Implementations of this control law, for a level plant of second order, was resulted an oscillatory behavior, even if the neural identifier has converged. Such results had motivated the investigation of the applicability of that law. Starting from that, had been made stability mathematical analysis and several implementations, with simulated plants and with real plants, for analyze the problem. The analysis has been showed the law was designed being despised some components of dynamic of the plant to be controlled. Thus, for plants that these components have a significant influence in its dynamic, the law tends to fail

Efeito da introdução de resíduo de cinza de forno cerâmico em massa para cerâmica estrutural

The red ceramics and structural ceramics, as they are known, include ceramic materials made by blocks of seals and structures, bricks, tiles, smail flagstones manacles, rustic floors and ornamental materials. Their fabrication uses raw material such as clay and clay sites, with some content of impurity. It has good durability and mechanical strength to compression, low cost, making it one of the mainly used materials in civil engineering. The incorporation of many industrial activities residue to ceramic products is a technological alternative for reducing the environmental impact caused by its carefree disposal. This incorporation can promote chemical change and inertness of metals from residue, by fixation in the glassy phase of ceramic during the burning stage. The main aim of this project is to study the technical feasibility of the addition of ceramic oven ash into formulations of mass for structural ceramics. In this project two kinds of clay (plastic and non-plastic) were used, as well as the ash from firewood used in the process of burning of structural ceramics. A group of experiments was outlined, which permitted the evaluation of the influence of the burning cycle in different temperatures of the ash content in formulations for ceramic blocks through technological properties, mechanical behavior and microstructure. Five samples were processed of each one of the masses of plastic and non-plastic clay without addition of ash and with addition of ash on the percentages of 10 % and 20 %, for temperatures of 850 °C, 950 °C, 1050 °C and 1150 °C, obtained through sinterization process. Among the studied compositions, the one which presented best performance was the mass of clay with 10 % of ash, at temperature of 1150 °C, with the smallest absorption of water, the smallest apparent porosity, specific apparent mass a bit over the others and greatest mechanical resistance to flexion. The composition made confirmed the technical feasibility of the use of ash in the mass for structural ceramics with maintenance of its necessary characteristics for its purposes