Compensation to Workmen for Industrial Injuries

This thesis Entitled compensation to workmen for industrial injuries.Evaluation of the different forms of liability for compensating industrial injuries makes it evident that the liability under the social insurance scheme is the most befitting one, as it eliminates the problem of evasion of liability by the employer by providing for sharing of liability. Liability for compensation under the workmen's Compensation Act, 1923 and the Employees' State Insurance Act, 1948 arises only in the case of accidents, arising in the course of and out of employment. Majority of the workers, covered by the workmen's Compensation Act, have supported lumpsum payment of compensation under the Act. It appears that workers are ignorant of the cemerits of lumpsum payment. So, the workers should be properly educated by the Inspectorate, proposed above, about the comparative advantages of periodical payments. It is suggested that the workmens Compensation Act, 1923 may be amended, imposing fee upon the parties for each adjournment. It is also suggested that provision may be made in the workmens Compensation Act, 1923 for the expeditious despatch of amendments of the Workmen's Compensation Act, 1923, the Workmens· Compensation Rules, 1924 and the Schedules, made from time to time, to the comrnissioners for workmens Compensation, This will help them mete out justice to an injured workman, as required by the changes in the law. The Employees' State Insurance Act, 1948 and the Rules may be amended, requiring the employers to provide the employees with necessary information, in the vernacular language, about the employment injury benefits available under the Employees' State Insurance Act, 1948 and the formalities for obtaining the same. This will help the illiterate employees, especially the casual ones, avail of employment injury benefits. Changes in the law, on the lines suggested above, are imperative to make the system of compensation for industrial injuries prove effective and beneficial to injured workmen.

Behaviour of laterised normal and self compacting concrete subjected to elevated temperatures

Concrete is a universal material in the construction industry. With natural resources like sand and aggregate, fast depleting, it is time to look for alternate materials to substitute these in the process of making concrete. There are instances like exposure to solar radiation, fire, furnaces, and nuclear reactor vessels, special applications like missile launching pads etc., where concrete is exposed to temperature variations In this research work, an attempt has been made to understand the behaviour of concrete when weathered laterite aggregate is used in both conventional and self compacting normal strength concrete. The study has been extended to understand the thermal behaviour of both types of laterised concretes and to check suitability as a fire protection material. A systematic study of laterised concrete considering parameters like source of laterite aggregate, grades of Ordinary Portland Cement (OPC) and types of supplementary cementitious materials (fly ash and GGBFS) has been carried out to arrive at a feasible combination of various ingredients in laterised concrete. A mix design methodology has been proposed for making normal strength laterised self compacting concrete based on trial mixes and the same has also been validated. The physical and mechanical properties of laterised concretes have been studied with respect to different variables like exposure temperature (200°C, 400°C and 600°C) and cooling environment (air cooled and water cooled). The behaviour of ferrocement elements with laterised self compacting concrete has also been studied by varying the cover to mesh reinforcement (10mm to 50mm at an interval of 10mm), exposure temperature and cooling environment.

An Effective Path Protection Method to Attain the Route Stability in MANET

With the increasing popularity of wireless network and its application, mobile ad-hoc networks (MANETS) emerged recently. MANET topology is highly dynamic in nature and nodes are highly mobile so that the rate of link failure is more in MANET. There is no central control over the nodes and the control is distributed among nodes and they can act as either router or source. MANTEs have been considered as isolated stand-alone network. Node can add or remove at any time and it is not infrastructure dependent. So at any time at any where the network can setup and a trouble free communication is possible. Due to more chances of link failures, collisions and transmission errors in MANET, the maintenance of network became costly. As per the study more frequent link failures became an important aspect of diminishing the performance of the network and also it is not predictable. The main objective of this paper is to study the route instability in AODV protocol and suggest a solution for improvement. This paper proposes a new approach to reduce the route failure by storing the alternate route in the intermediate nodes. In this algorithm intermediate nodes are also involved in the route discovery process. This reduces the route establishment overhead as well as the time to find the reroute when a link failure occurs.

RMAC-M: Extending the R-MAC Protocol for an Energy Efficient, Delay Tolerant Underwater Acoustic Sensor Network application with a mobile data mule node

One of the major applications of underwater acoustic sensor networks (UWASN) is ocean environment monitoring. Employing data mules is an energy efficient way of data collection from the underwater sensor nodes in such a network. A data mule node such as an autonomous underwater vehicle (AUV) periodically visits the stationary nodes to download data. By conserving the power required for data transmission over long distances to a remote data sink, this approach extends the network life time. In this paper we propose a new MAC protocol to support a single mobile data mule node to collect the data sensed by the sensor nodes in periodic runs through the network. In this approach, the nodes need to perform only short distance, single hop transmission to the data mule. The protocol design discussed in this paper is motivated to support such an application. The proposed protocol is a hybrid protocol, which employs a combination of schedule based access among the stationary nodes along with handshake based access to support mobile data mules. The new protocol, RMAC-M is developed as an extension to the energy efficient MAC protocol R-MAC by extending the slot time of R-MAC to include a contention part for a hand shake based data transfer. The mobile node makes use of a beacon to signal its presence to all the nearby nodes, which can then hand-shake with the mobile node for data transfer. Simulation results show that the new protocol provides efficient support for a mobile data mule node while preserving the advantages of R-MAC such as energy efficiency and fairness.

How to do a dissertation

The role of the supervisor• agree a timetable of meetings at the start of your project and stick to it;• make sure that each meeting has a focus eg “setting a research problem”,“analysing the data”;• send something that can form the basis of a discussion about your progress to your supervisor before each meeting. This could include your research plan, early results of your data collection or draft chapters;• turn up on time to each meeting you have arranged. Do not assume that your supervisor is available at all times to see you;• at the end of each

Effect of environmental conditions on the N uptake route of soil microorganisms and adaption of a method to determine amino acid oxidase in soil

Soil microorganisms have evolved two possible mechanisms for their uptake of organic N: the direct route and the mobilization-immobilization-turnover (MIT) route. In the direct route, simple organic molecules are taken up via various mechanisms directly into the cell. In the MIT route, the deamination occurs outside the cell and all N is mineralized to NH4+ before assimilation. A better understanding of the mechanisms controlling the different uptake routes of soil microorganisms under different environmental conditions is crucial for understanding mineralization processes of organic material in soil. For the first experiment we incubated soil samples from the long term trial in Bad Lauchstädt with corn residues with different C to N ratios and inorganic N for 21 days at 20 °C. Under the assumption that all added amino acids were taken up or mineralized, the direct uptake route was more important in soil amended with corn residues with a wide C to N ratio. After 21 days of incubation the direct uptake of added amino acids increased in the order addition of corn residue with a: “C to N ratio of 40 & (NH4)2SO4 and no addition (control)” (69% and 68%, respectively) < “C to N ratio of 20” (73%) < “C to N ratio of 40” (95%). In all treatments the proportion of the added amino acids that were mineralized increased with time, indicating that the MIT route became more important over time. To investigate the effects of soil depth on the N uptake route of soil microorganisms (experiment II), soil samples in two soil depths (0-5 cm; 30-40 cm) were incubated with corn residues with different C to N ratios and inorganic N for 21 days at 20 °C and 60% (WHC). The addition of corn residue resulted in a marked increase of protease activity in both depths due to the induction from the added substrate. Addition of corn residue with a wide C to N ratio resulted in a significantly greater part of the direct uptake (97% and 94%) than without the addition of residues (85% and 80%) or addition of residue with a small C to N ratio (90% and 84%) or inorganic N (91% and 79% in the surface soil and subsoil, respectively), suggesting that under conditions of sufficient mineralizable N (C to N ratio of 20) or increased concentrations of NH4+, the enzyme system involved in the direct uptake is slightly repressed. Substrate additions resulted in an initially significantly higher increase of the direct uptake in the surface soil than in the subsoil. As a large proportion of the organic N input into soil is in form of proteinaceous material, the deamination of amino acids is a key reaction of the MIT route. Therefore the enzyme amino acid oxidase contribute to the extracellular N mineralization in soil. The objective of experiment III was to adapt a method to determine amino acid oxidase in soil. The detection via synthetic fluorescent Lucifer Yellow derivatives of the amino acid lysine is possible in soil. However, it was not possible to find the substrate concentration at which the reaction rate is independent of substrate concentration and therefore we were not able to develop a valid soil enzyme assay.

Alley cropping of willows and grassland for bioenergy provision: productivity, tree-crop interactions and energy balance

The demand for biomass for bioenergy has increased rapidly in industrialized countries in the recent years. Biogenic energy carriers are known to reduce CO2 emissions. However, the resource-inefficient production of biomass often caused negative impacts on the environment, e.g. biodiversity losses, nitrate leaching, and erosion. The detrimental effects evolved mainly from annual crops. Therefore, the aim of modern bioenergy cropping systems is to combine yield stability and environmental benefits by the establishment of mixed-cropping systems. A particular emphasis is on perennial crops which are perceived as environmentally superior to annual crops. Agroforestry systems represent such mixed perennial cropping systems and consist of a mix of trees and arable crops or grassland within the same area of land. Agroforestry practices vary across the globe and alley cropping is a type of agroforestry system which is well adapted to the temperate zone, with a high degree of mechanization. Trees are planted in rows and crops are planted in the alleyways, which facilitates their management by machinery. This study was conducted to examine a young alley cropping system of willows and two grassland mixtures for bioenergy provision under temperate climate conditions. The first part of the thesis identified possible competition effects between willows and the two grassland mixtures. Since light seemed to be the factor most affecting the yield performance of the understory in temperate agroforestry systems, a biennial in situ artificial shade experiment was established over a separate clover-grass stand to quantify the effects of shade. Data to possible below- and aboveground interactions among willows and the two grassland mixtures and their effects on productivity, sward composition, and quality were monitored along a tree-grassland interface within the alleys. In the second part, productivity of the alley cropping system was examined on a triennial time frame and compared to separate grassland and willow stands as controls. Three different conversion technologies (combustion of hay, integrated generation of solid fuel and biogas from biomass, whole crop digestion) were applied to grassland biomass as feedstock and analyzed for its energetic potential. The energetic potential of willow wood chips was calculated by applying combustion as conversion technique. Net energy balances of separate grassland stands, agroforestry and pure willow stands evaluated their energy efficiency. Results of the biennial artificial shade experiment showed that severe shade (80 % light reduction) halved grassland productivity on average compared to a non-shaded control. White clover as heliophilous plant responded sensitively to limited radiation and its dry matter contribution in the sward decreased with increasing shade, whereas non-leguminous forbs (mainly segetal species) benefited. Changes in nutritive quality could not be confirmed by this experiment. Through the study on interactions within the alleys of the young agroforestry system it was possible to outline changes of incident light, soil temperature and sward composition of clover-grass along the tree-grassland interface. Nearly no effects of trees on precipitation, soil moisture and understory productivity occurred along the interface during the biennial experiment. Considering the results of the productivity and the net energy yield alley cropping system had lower than pure grassland stands, irrespective of the grassland seed mixture or fertilization, but was higher than that for pure willow stands. The comparison of three different energetic conversion techniques for the grassland biomass showed highest net energy yields for hay combustion, whereas the integrated generation of solid fuel and biogas from biomass (IFBB) and whole crop digestion performed similarly. However, due to the low fuel quality of hay, its direct combustion cannot be recommended as a viable conversion technique, whereas IFBB fuels were of a similar quality to wood chip from willow.

Feature Point Detection and Curve Approximation for Early Processing of Freehand Sketches

Freehand sketching is both a natural and crucial part of design, yet is unsupported by current design automation software. We are working to combine the flexibility and ease of use of paper and pencil with the processing power of a computer to produce a design environment that feels as natural as paper, yet is considerably smarter. One of the most basic steps in accomplishing this is converting the original digitized pen strokes in the sketch into the intended geometric objects using feature point detection and approximation. We demonstrate how multiple sources of information can be combined for feature detection in strokes and apply this technique using two approaches to signal processing, one using simple average based thresholding and a second using scale space.

A Hierarchical Cache Coherent Protocol

As the number of processors in distributed-memory multiprocessors grows, efficiently supporting a shared-memory programming model becomes difficult. We have designed the Protocol for Hierarchical Directories (PHD) to allow shared-memory support for systems containing massive numbers of processors. PHD eliminates bandwidth problems by using a scalable network, decreases hot-spots by not relying on a single point to distribute blocks, and uses a scalable amount of space for its directories. PHD provides a shared-memory model by synthesizing a global shared memory from the local memories of processors. PHD supports sequentially consistent read, write, and test- and-set operations. This thesis also introduces a method of describing locality for hierarchical protocols and employs this method in the derivation of an abstract model of the protocol behavior. An embedded model, based on the work of Johnson[ISCA19], describes the protocol behavior when mapped to a k-ary n-cube. The thesis uses these two models to study the average height in the hierarchy that operations reach, the longest path messages travel, the number of messages that operations generate, the inter-transaction issue time, and the protocol overhead for different locality parameters, degrees of multithreading, and machine sizes. We determine that multithreading is only useful for approximately two to four threads; any additional interleaving does not decrease the overall latency. For small machines and high locality applications, this limitation is due mainly to the length of the running threads. For large machines with medium to low locality, this limitation is due mainly to the protocol overhead being too large. Our study using the embedded model shows that in situations where the run length between references to shared memory is at least an order of magnitude longer than the time to process a single state transition in the protocol, applications exhibit good performance. If separate controllers for processing protocol requests are included, the protocol scales to 32k processor machines as long as the application exhibits hierarchical locality: at least 22% of the global references must be able to be satisfied locally; at most 35% of the global references are allowed to reach the top level of the hierarchy.

Incremental Verification of Timing Constraints for Real-Time Systems

Testing constraints for real-time systems are usually verified through the satisfiability of propositional formulae. In this paper, we propose an alternative where the verification of timing constraints can be done by counting the number of truth assignments instead of boolean satisfiability. This number can also tell us how “far away” is a given specification from satisfying its safety assertion. Furthermore, specifications and safety assertions are often modified in an incremental fashion, where problematic bugs are fixed one at a time. To support this development, we propose an incremental algorithm for counting satisfiability. Our proposed incremental algorithm is optimal as no unnecessary nodes are created during each counting. This works for the class of path RTL. To illustrate this application, we show how incremental satisfiability counting can be applied to a well-known rail-road crossing example, particularly when its specification is still being refined.

Prevalencia de dolor lumbar y su relación con la condición física: Estudio en trabajadores del área administrativa de una institución educativa en la ciudad de Bogotá, 2008

Objetivo: Determinar la prevalencia del dolor lumbar y su asociación con cinco variables de condición física en 346 trabajadores del área administrativa de una institución educativa en la ciudad de Bogotá, mediante la revisión y análisis de la base de datos de la empresa Ergosourcing Ltda. Métodos: La población de estudio estuvo conformada por los 346 trabajadores a quienes se les practicó evaluación de la condición física por parte de fisioterapeutas especialistas en prescripción de ejercicio, entre Julio y Septiembre de 2008. La variable dependiente fue el Dolor lumbar evaluando la morbilidad sentida, de acuerdo a una escala descriptiva simple de dolor. Las variables independientes fueron índice de masa corporal, adipometría, alineación postural, flexibilidad de Wells y potencia abdominal. Se practicó análisis bivariante y se ajustó un modelo de regresión logística incondicional para determinar la relación entre las variables. Resultados: La prevalencia de dolor lumbar en la población fue del 20,3%. Tras ajustar por todas las variables independientes, se observó asociación con la edad (p 0,007), el tiempo de servicio en el cargo (p 0,03) y el sobrepeso – obesidad, medidos a través de la adipometría (p 0,05). Se halló un riesgo 7 veces mayor entre las personas que tenían sobrepeso y obesidad comparados con los que presentaban peso normal y de 13,4 veces más en personas de 55 años o mayores al tomar como referencia el grupo de menores de 25 años. Conclusiones: se encontró que tienen más riesgo de dolor lumbar los trabajadores del grupo de mayor edad (> 55 años) y con más tiempo de exposición (> 20 años); al determinar sobrepeso y obesidad con la adipometría y no con el IMC, se encontró que si hay asociación significativa con dolor lumbar. Es necesario realizar un estudio en trabajadores con requerimientos físicos mayores y compararlos con los resultados de este estudio. Es de relevancia implementar la búsqueda de pruebas que permitan evaluar la condición física de los trabajadores, establecer su relación con el dolor lumbar y sean predictivas de su aparición.

Valor predictivo del índice de severidad para gangrena de fournier en el Hospital Universitario de la Samaritana

La GF es una infección fulminante, afecta cualquier edad y género. Se ha descrito el índice de severidad de gangrena de Fournier (ISGF), el cual es útil para evaluar el pronóstico de estos pacientes. OBJETIVO. Reportar nuestra experiencia con esta patología en los últimos 12 años y evaluar el valor predictivo del ISGF de manera retrospectiva. METODOS Se analizaron las historias clínicas de los pacientes con GF de los últimos 12 años en el HUS. Se determinaron los factores asociados a mortalidad y se realizó un análisis de calibración y discriminación del ISGF. RESULTADOS Se recolectaron 40 pacientes todos del género masculino con una edad promedio de 60.3 años (+ /– 14.9). La comorbilidad y causa más frecuente fueron hipertensión arterial y causas urológicas. El patógeno más frecuente fue E. coli. El porcentaje mortalidad en nuestra población fue del 15%. El promedio de ISGF y ISGF ajustado fue: 4.9 y 9.83 ; 9.83 y 4.91 para los fallecidos y los no fallecidos respectivamente, existiendo una diferencia estadísticamente significativa para los dos. (p < 0,05). En el análisis de correlación, discriminación y concordancia, el ISGF sobreestima mortalidad y en ISGF ajustado subestima mortalidad, pero tiene una buena correlación con mortalidad DISCUSIÓN: En nuestro hospital, la GF es una patología poco frecuente; a pesar de esto, se cuenta con un diagnóstico rápido y a su vez un manejo inmediato. Hasta el momento la conducta quirúrgica inmediata y el pronto inicio de antibioticoterapia continúan siendo la mejor opción terapéutica. Existe una relación entre el índice de severidad y la sobrevida de los pacientes, lo cual puede convertirlo en un parámetro útil en la evaluación de estos pacientes. Sin embargo se necesitan estudios prospectivos para validar la escala en nuestra población

Desarrollo de un nuevo protocolo de cirugía general, que disminuya las devoluciones de medicamentos e insumos al almacén de cirugía del Hospital Méderi

Esta tesis surge como una oportunidad de mejora en el almacén de cirugías del Hospital MÉDERI, debido a la recurrente devolución de medicamentos e insumos solicitados por las auxiliares de enfermería para las cirugías generales, lo cual repercute directamente en pérdidas de productividad laboral por los re-procesos, un aumento en los errores humanos y posibles pérdidas de medicamentos e insumos. Tras esta clara oportunidad de mejora, se toma la decisión de evaluar el proceso interno del almacén de cirugías con el fin de conocer el punto crítico que genera esta situación; dando como resultado los protocolos de cirugías, los cuales al haber sido diseñados varios años atrás basados en una demanda presentada en ese momento, no están acorde con la realidad que se vive actualmente el almacén de cirugía. Por lo tanto se decidió implementar un pronóstico de promedio móvil, para identificar la demanda real que se presentan en el Hospital MÉDERI, esto seguido de una identificación gráfica comparativa que permitiera definir el nuevo protocolo de cirugía general, lo cual permite disminuir la cantidad de material solicitado, con lo cual se generan disminuciones significativas en el inventario, perdidas y un aumento en la productividad.

Implementación de buenas prácticas logísticas en el marco de seguridad industrial, almacenamiento y gestión del control de inventarios en la empresa Yokomotos

Con este trabajo se pretende generar una implementación de una mejora logística que agregue valor, aumente la eficiencia y mejore los procesos de almacenamiento y distribución, gestión del control de inventarios y seguridad industrial de la empresa YOKOMOTOS. Se realizó un estudio profundo de la situación y los problemas que tiene actualmente la empresa. Todo esto con el fin de dar resultados que diferencien a esta compañía en el mercado de los repuestos para motos, obteniendo mayor prestigio y reconocimiento a nivel latinoamericano. De igual forma se establecieron las posibles soluciones que permitieran mitigar estos problemas, mejorando los procesos en el área de almacenamiento, sistema de inventarios y seguridad industrial. Se realizaron diferentes pruebas piloto para analizar la viabilidad de nuestras soluciones, analizando espacios, tiempos y costos. Por último se implementó la mejor solución la cual se ajustó respondiendo a los requerimientos de la compañía, mejorando así los procesos de almacenamiento y distribución agregándole valor a su cadena.

Revisión sistemática : uso de imágenes por difusión en RMN, para predecir sobrevida en pacientes adultos con diagnostico de glioblastoma multiforme

El Glioblastoma multiforme (GBM), es el tumor cerebral más frecuente, con pronóstico grave y baja sensibilidad al tratamiento inicial. El propósito de este estudio fue evaluar si la Difusión en RM (IDRM), es un biomarcador temprano de respuesta tumoral, útil para tomar decisiones tempranas de tratamiento y para obtener información pronostica. Metodología La búsqueda se realizo en las bases de datos EMBASE, CENTRAL, MEDLINE; las bibliografías también fueron revisadas. Los artículos seleccionados fueron estudios observacionales (casos y controles, cohortes, corte transversal), no se encontró ningún ensayo clínico; todos los participante tenían diagnostico histopatológico de GBM, sometidos a resección quirúrgica y/o radio-quimioterapia y seguimiento de respuesta al tratamiento con IDRM por al menos 6 meses. Los datos extraídos de forma independiente fueron tipo de estudio, participantes, intervenciones, seguimiento, desenlaces (sobrevida, progresión/estabilización de la enfermedad, muerte) Resultados Quince estudios cumplieron los criterios de inclusión. Entre las técnicas empleadas de IDRM para evaluar respuesta radiológica al tratamiento, fueron histogramas del coeficiente aparente de difusion ADC (compararon valores inferiores a la media y el percentil 10 de ADC, con los valores superiores); encontrando en términos generales que un ADC bajo es un fuerte predictor de sobrevida y/o progresión del tumor. (Esto fue significativo en 5 estudios); mapas funcionales de difusion (FDM) (midieron el porcentaje de cambio de ADC basal vs pos tratamiento) que mostro ser un fuerte predictor de sobrevida en pacientes con progresión tumoral. DISCUSION Desafortunadamente la calidad de los estudios fue intermedia-baja lo que hace que la aplicabilidad de los estudios sea limitada.