1000 resultados para 7140-315
Resumo:
A validation study of an UV spectrophotometric method was conducted for quantitative analysis of benznidazol (BZN) in a lipid. The analytical determinations were performed at 315 nm at 25 ºC. The emulsion components did not interfere on drug analyses, demonstrating the specificity of the methodology. A good linearity (r = 0.99995) and precision (RSD < 5.0%) for intra and inter-day studies, including the reproducibility test were observed. The accuracy ranged of 102.1 + 2.8 e 103.8 + 1.7%. The statistical analysis demonstrates a linear, precise, accurate and robust method for BZN quantification from the lipid emulsion system.
Resumo:
A utilização de tolerância como forma de controle da ferrugem da soja (Glycine max), causada pelo fungo Phakopsora pachyrhizi, pode ser uma alternativa viável, visto que a resistência qualitativa tem-se mostrado instável, em função da variabilidade do fungo. Este trabalho foi realizado na região oeste da Bahia, na safra 2003/04, com objetivo de avaliar a tolerância das principais cultivares de soja utilizadas na região. Foram avaliadas quatro cultivares de ciclo precoce [MG/BR 46 (Conquista), Emgopa 315, BRS Corisco e M-SOY 8411] e quatro cultivares de ciclo tardio (BRS Barreiras, M-SOY 9350, FT 106 e BRS Sambaíba). A tolerância foi quantificada pela diferença de produtividade entre subparcelas tratadas e não tratadas com fungicida. As cultivares MG/BR 46 (Conquista) e M-SOY 8411 apresentaram diferenças de rendimento não significativas, no entanto, essa característica não pôde ser atribuída à tolerância, em função da baixa severidade observada no ensaio. Essa diferença pôde ser atribuída a escape, uma vez que, no momento em que a ferrugem obteve valores mais elevados de severidade, as duas cultivares já estavam na fase final de desenvolvimento. Embora a severidade máxima observada no ensaio tenha sido baixa (30,5% para a cultivar BRS Barreiras), com exceção das cultivares MG/BR 46 (Conquista) e M-SOY 8411, as demais cultivares avaliadas apresentaram diferença significativa entre as subparcelas tratadas e não tratadas com fungicida, mostrando ausência de tolerância das principais cultivares comerciais cultivadas no oeste da Bahia. Neste trabalho, foi observado que as cultivares de ciclo precoce apresentaram reduções de produtividade inferiores às de ciclo tardio.
Resumo:
The computer is a useful tool in the teaching of upper secondary school physics, and should not have a subordinate role in students' learning process. However, computers and computer-based tools are often not available when they could serve their purpose best in the ongoing teaching. Another problem is the fact that commercially available tools are not usable in the way the teacher wants. The aim of this thesis was to try out a novel teaching scenario in a complicated subject in physics, electrodynamics. The didactic engineering of the thesis consisted of developing a computer-based simulation and training material, implementing the tool in physics teaching and investigating its effectiveness in the learning process. The design-based research method, didactic engineering (Artigue, 1994), which is based on the theoryof didactical situations (Brousseau, 1997), was used as a frame of reference for the design of this type of teaching product. In designing the simulation tool a general spreadsheet program was used. The design was based on parallel, dynamic representations of the physics behind the function of an AC series circuit in both graphical and numerical form. The tool, which was furnished with possibilities to control the representations in an interactive way, was hypothesized to activate the students and promote the effectiveness of their learning. An effect variable was constructed in order to measure the students' and teachers' conceptions of learning effectiveness. The empirical study was twofold. Twelve physics students, who attended a course in electrodynamics in an upper secondary school, participated in a class experiment with the computer-based tool implemented in three modes of didactical situations: practice, concept introduction and assessment. The main goal of the didactical situations was to have students solve problems and study the function of AC series circuits, taking responsibility for theirown learning process. In the teacher study eighteen Swedish speaking physics teachers evaluated the didactic potential of the computer-based tool and the accompanying paper-based material without using them in their physics teaching. Quantitative and qualitative data were collected using questionnaires, observations and interviews. The result of the studies showed that both the group of students and the teachers had generally positive conceptions of learning effectiveness. The students' conceptions were more positive in the practice situation than in the concept introduction situation, a setting that was more explorative. However, it turned out that the students' conceptions were also positive in the more complex assessment situation. This had not been hypothesized. A deeper analysis of data from observations and interviews showed that one of the students in each pair was more active than the other, taking more initiative and more responsibilityfor the student-student and student-computer interaction. These active studentshad strong, positive conceptions of learning effectiveness in each of the threedidactical situations. The group of less active students had a weak but positive conception in the first iv two situations, but a negative conception in the assessment situation, thus corroborating the hypothesis ad hoc. The teacher study revealed that computers were seldom used in physics teaching and that computer programs were in short supply. The use of a computer was considered time-consuming. As long as physics teaching with computer-based tools has to take place in special computer rooms, the use of such tools will remain limited. The affordance is enhanced when the physical dimensions as well as the performance of the computer are optimised. As a consequence, the computer then becomes a real learning tool for each pair of students, smoothly integrated into the ongoing teaching in the same space where teaching normally takes place. With more interactive support from the teacher, the computer-based parallel, dynamic representations will be efficient in promoting the learning process of the students with focus on qualitative reasoning - an often neglected part of the learning process of the students in upper secondary school physics.
Resumo:
O presente trabalho teve como objetivo avaliar o efeito do tratamento de sementes associado à pulverização foliar no controle da ferrugem asiática da soja. O experimento foi conduzido na estação experimental da Emater-GO, no município de Senador Canedo, GO. O delineamento experimental foi o de blocos ao acaso no esquema fatorial 3x2x2 com 4 repetições. Dois fungicidas triazóis foram testados no tratamento de sementes: fluquinconazol e flutriafol, em duas cultivares de soja, BRS Valiosa RR e Emgopa 315 RR, e pulverização foliar com fungicida azoxistrobina associado com ciproconazol e nimbus. Para todas as variáveis analisadas, realizou-se análise de variância em esquema fatorial e as médias foram comparadas pelo teste Tukey a 5 % de probabilidade. O tratamento de sementes com fluquinconazol e flutriafol não afetou a emergência em nenhuma das cultivares analisadas. Aos 65 dias após a semeadura, observou-se que a cultivar Emgopa 315 RR obteve menor incidência da ferrugem. Os fungicidas fluquinconazol e flutriafol promoveram também uma menor incidência e menor severidade da doença. Para a variável desfolha, foi observado que a Emgopa 315 RR obteve menor desfolha do que a BRS Valiosa RR na data avaliada. Dentro da cultivar BRS Valiosa RR os tratamentos com fungicidas para tratamento de sementes promoveram menor desfolha do que sem tratamento de sementes. Já na Emgopa 315 RR esse fato não foi detectado. O tratamento de sementes com fungicidas pode ser uma ferramenta útil para o manejo da ferrugem asiática da soja, apesar desta técnica de aplicação de fungicidas não ter influenciado na produtividade das cultivares de soja transgênicas.
Resumo:
Tarkoitus: Tarkoituksena oli selvittää murtumien tehostetun ehkäisyohjelman vaikutuksia yläraajamurtuman saaneiden yli 50-vuotiaiden henkilöiden elämäntapoihin, murtumien riskitekijöihin, kaatumisiin, kaatumisvammoihin ja elämänlaatuun. Aineisto: 219 yli 50-vuotiasta kotona asuvaa, kaatumisen seurauksena yläraajamurtuman saanutta henkilöä satunnaistettiin koe- (n = 105) ja kontrolliryhmiin (n = 114). Menetelmä: Koeohjelma sisälsi yksilöllisen, yhdessä lääkärin, terveydenhoitajan ja tutkittavan kanssa laaditun hoito- ja kuntoutussuunnitelman sekä kutsun murtumien ehkäisyn koulutusohjelmaan. Kontrolliryhmän tutkittavat saivat kehotuksen hakeutua murtumahoitajan ohjaukseen. Seuranta-aika oli 14 kuukautta. Tulokset analysoitiin ryhmissä tapahtuneina muutoksina alkuja loppumittausten välillä sekä ryhmien välisenä erona muutoksissa. Tulokset: Keskimääräinen luun tiheys lannerangassa lisääntyi koeryhmässä (p<0,001) ja kontrolliryhmässä (p = 0,038), ryhmien välinen ero ei ollut tilastollisesti merkitsevä (p = 0,134). Reisiluun kaulassa luun tiheys ei muuttunut kummassakaan ryhmässä. Päivittäinen kalsiumin saanti lisääntyi koeryhmässä keskimäärin 167 mg (p<0,001) ja kontrolliryhmässä 30 mg (p = 0,475), ryhmien välinen ero oli tilastollisesti merkitsevä (p = 0,031). Kala-ateriat ja päivittäinen D-vitamiinilisä sekä kenkien liukuesteiden säännöllinen käyttö liukkaalla lisääntyivät molemmissa ryhmissä, mutta ryhmien välillä ei ollut eroa. Viiteen tuolilta nousukertaan käytetty aika vähentyi koeryhmässä keskimäärin 0,49 sekuntia (p = 0,185) ja lisääntyi kontrolliryhmässä 0,39 (p = 0,475), ero ryhmien välillä oli tilastollisesti merkitsevä (p = 0,02). Kymmenen metrin kävelyssä ei tapahtunut tulosten keskiarvossa muutoksia kummassakaan ryhmässä. Ortostatismi vähentyi kontrolliryhmässä (p = 0,049), ja masentuneisuus vähentyi koeryhmässä (p = 0,041), mutta ryhmien välillä ei näissä ollut merkitsevää eroa. Osteoporoosilääkkeiden käyttö lisääntyi molemmissa ryhmissä, ryhmien välillä ei ollut eroa. Alkoholin käytössä oli vähäisiä mutta ei merkittäviä muutoksia. Muissa testatuissa muuttujissa, kuten liikunnan viikoittainen määrä, tupakointi, näkökyky, tasapaino ja elämänlaatu, ei ollut merkitseviä muutoksia ryhmissä tai ryhmien välillä. Kaatumisten (koeryhmä 33, kontrolliryhmä 35) ja murtumien (koeryhmä 5 ja kontrolliryhmä 3) määrissä ei myöskään ollut merkitseviä eroja ryhmien välillä. Johtopäätökset: Noin neljällä viidestä kaatumisen seurauksena yläraajamurtuman saaneista, yli 50 vuotta täyttäneistä henkilöistä oli alentunut luun tiheys, ja noin joka toisella oli lisääntynyt kaatumisriski. Kaatumisen riskitekijöiden kliiniset mittaukset olivat nopeita toteuttaa ja auttoivat ehkäisytoimenpiteiden suunnittelussa. Murtuman saaneet olivat motivoituneita murtumien riskitekijöiden selvittämiseen ja myös toteuttamaan annettua lääkehoitoa. Elämäntavoissa helpoimmin toteutuivat muutokset ruokailutottumuksissa. Liikuntatottumuksien muuttaminen sen sijaan onnistui melko huonosti. Ryhmien välillä oli merkitsevä ero ainoastaan kalsiumin päivittäisessä käytössä ja tuolilta nousutestissä. Murtumariskien tunnistaminen, niiden syiden selvittäminen ja toimenpiteiden käynnistäminen riskien vähentämiseksi tulisi kuulua jokaisen pienienergisen murtuman saaneen potilaan kokonaisvaltaiseen hyvään hoitoon.
Resumo:
Na Amazônia, vários empreendimentos minerários estão situados em unidades de conservação. A restauração ecológica após a lavra do minério abrange vários atributos. Entre esses, destaca-se a necessidade de o ecossistema restaurado conter um conjunto de espécies-chave de ocorrência no ecossistema de referência e, dessa forma, proporcionar estrutura apropriada de comunidade, além de ser constituído do maior número possível de espécies nativas. Objetivou-se, neste trabalho, analisar um índice fitossociológico e socioeconômico (IFSE), obtido por técnicas de análise multivariada. O modelo envolveu seis variáveis quantitativas (abundância, frequência, dominância, biomassa, valor comercial da madeira e quantidade de produtos florestais não madeireiros) e igual número de variáveis qualitativas. Em uma área de floresta ombrófila de 1.321 ha, foram amostradas 315 parcelas de 0,25 ha, em que todos os indivíduos com DAP > 10 cm foram identificados e mensurados. Foram registrados 36.298 indivíduos, distribuídos em 898 espécies, abrangendo 62 famílias. As espécies foram ranqueadas através do índice proposto em três categorias de prioridade fitossociológica e socioeconômica (alta, média e baixa). A adequação da análise fatorial foi determinada pelos testes de Bartlett e KMO. O teste de Bartlett avaliou a significância geral da matriz de correlação a 1% de probabilidade. O teste KMO indicou que as variáveis estão correlacionadas, e o modelo fatorial apresentou nível muito bom de adequação aos dados. O uso de análise multivariada foi estatisticamente validado para o emprego do IFSE. Entre as 898 espécies analisadas, 25 foram selecionadas como prioritárias (categorias alta e média), sendo reconhecidas como espécies-chave. Foi estimada a densidade de plantio dessas espécies para recuperação de áreas mineradas na Amazônia, com condições biológicas e ambientais semelhantes às relatadas neste estudo. A distribuição diamétrica das espécies-chave foi analisada e comparada com a da floresta inventariada. O estágio sucessional das espécies-chave foi também analisado.
Resumo:
ABSTRACT We aimed in this work to study natural populations of copaiba (Copaifera multijuga Hayne) on the Monte Branco mountain at Porto Trombetas-PA, in order to support sustainable management and the exploitation of oleoresin from copaiba. We studied the population structure of copaiba on hillsides and valleys of the south face of Monte Branco, within Saracá Taquera National Forest, where bauxite ore was extracted in the biennium 2013-2014 by Mineração Rio do Norte (MRN). We produced a 100% forest inventory of the specie and of oleoresin extraction in order to quantify the potential production of the remaining area. The density of copaiba individuals with DBH > 30 cm was 0.33 individuals per hectare in the hillside and 0.25 individuals per hectare in the valley. Both environments presented a density of 0.28 individuals per hectare. The average copaiba oleoresin yield was 0.661±0.334 liters in the hillside and 0.765±0.280 liters in the valley. The average value of both environments together (hillside and valley) was 0.714±0.218 liters. From all individuals with DBH over 30 cm, 38 (58%) produced some amount of oleoresin, averaging 1.113±0.562 liters in the hillside, 1.329±0.448 liters in the valley and 1.190±0.355 liters in both environments together. The results show the need for planning the use of the surroundings of the study area in order to reach the required volume of copaiba to make feasible the sustainable management of oleoresin extraction in the region.
Resumo:
A cultura de cana-de-açúcar ocupa um papel importante na economia brasileira, sendo sua colheita ainda em grande parte realizada manualmente, pelo método tradicional de colheita de cana-de-açúcar inteira. As colhedoras existentes no mercado adotaram uma tecnologia de picar a cana-de-açúcar em rebolos de 200 a 300 mm, para permitir sua transferência para o veículo de transporte que acompanha a colhedora, contradizendo o método tradicional de colheita. Para viabilizar a colheita mecânica de cana-de-açúcar inteira, uma das barreiras tecnológicas a ser vencida é a remoção da palha mecanicamente. Projetar um mecanismo que realize essa operação depende diretamente do conhecimento de propriedades mecânicas da cana-de-açúcar. Este trabalho teve por objetivo avaliar a resistência do colmo de cana-de-açúcar à compressão e determinar as forças necessárias para separar a folha do colmo. Ensaios de compressão foram realizados utilizando-se da máquina universal de ensaios. Para o ensaio de remoção de palha por atrito, um dispositivo especial foi projetado e construído de modo a permitir a determinação de esforços de tração e força normal. Os resultados mostram que a cana resiste a uma força de compressão na faixa de 4,9 MPa e que com uma pressão normal média de 0,8 MPa, que corresponde a uma força de fricção de 315 N, a folha é removida, independentemente de sua posição no internódio.
Resumo:
Kirjallisuusarvostelu
Resumo:
1868/03/01 (Numéro 315).
Resumo:
1887/07/06 (Numéro 7140).
Resumo:
The quasiclassical approach was applied to the investigation of the vortex properties in the ironbased superconductors. The special attention was paid to manifestation of the nonlocal effects of the vortex core structure. The main results are as follows: (i) The effects of the pairing symmetries (s+ and s₊₊) on the cutoff parameter of field distribution, ξh, in stoichiometric (like LiFeAs) and nonstoichiometric (like doped BaFe₂As₂) iron pnictides have been investigated using Eilenberger quasiclassical equations. Magnetic field, temperature and impurity scattering dependences of ξh have been calculated. Two opposite behavior have been discovered. The ξh /ξc2 ratio is less in s+ symmetry when intraband impurity scattering (Γ₀) is much larger than one and much larger than interband impurity scattering (Γπ), i.e. in nonstoichiometric iron pnictides. Opposite, the value ξh /ξc2 is higher in s+ case and the field dependent curve is shifted upward from the "clean" case (Γ₀ = Γπ = 0) for stoichiometric iron pnictides (Γ₀ = Γπ ≪ 1). (ii) Eilenberger approach to the cutoff parameter, ξh, of the field distribution in the mixed state of high
Resumo:
Artikkeli luettavissa osassa: Part 2. - ISBN 9789522163172(PDF). - Liitteenä työpaperi
Resumo:
Maantie 170 (Helsingintie) toimii valtatie 7 (E18 moottoritien) rinnakkaistienä Helsingistä Söderkullan kautta Porvooseen ja paikallisyhteytenä Kulloon ja Ernestasin välillä. Selvitysalueen länsipuolella maantien 170 ja maantien 148 (Öljytie) liittymästä alkaa nykyinen kevyen liikenteen väylä joka kulkee maantien 148 rinnalla Kilpilahden jalostamoalueelle. Selvitysalueen itäosassa maantien 170 ja Pienteollisuustien/ Ernestantien liittymästä alkaa nykyinen kevyen liikenteen väylä, joka kulkee maantien 170 rinnalla Porvoon keskustaan. Toimenpideselvityksessä esitetyt ratkaisut ovat yleispiirteisiä ja kuvaavat maastokäytävää, johon toimenpiteet voidaan toteuttaa. Helsingintien yhteyteen maantien pohjoispuolelle ehdotetaan rakennettavaksi kevyen liikenteen väylä. Väylä ehdotetaan alkavaksi selvitysalueen länsipäässä maantien 11750 (Palokunnantie) ja Vanhan Kulloontien liittymästä ja päättyväksi Pienteollisuustien ja Ernestantien liittymään. Kevyen liikenteen väylän pituudeksi tulee noin 7,5 kilometriä. Suunnitelman mukaisiksi rakentamiskustannuksiksi on arvioitu noin 3,20 M€. Rakentamalla uusi kevyen liikenteen väylä, parannetaan jalankulkijoiden ja pyöräilijöiden liikkumisolosuhteita sekä turvallisuutta alueella. Myös edellytykset koululaisten itsenäiselle liikkumiselle alueella parantuvat oleellisesti. Kevyen liikenteen väylän rakentaminen täydentää alueen nykyistä kevyen liikenteen verkkoa ja poistaa verkollisen yhteyden puutteen Kilpilahden jalostamoalueen ja Porvoon keskustan välillä. Uusi kevyen liikenteen väylä parantaa myös seudullisia yhteyksiä Porvoosta pääkaupunkiseudun suuntaan ja vastaavasti pääkaupunkiseudulta Porvooseen. Selvityksen ja siitä saatujen lausuntojen perusteella Uudenmaan ELY-keskus tekee hankkeesta jatkosuunnittelupäätöksen. Hanke ei sisälly Uudenmaan ELY-keskuksen tienpidon ja liikenteen suunnitelmaan 2012–2015. Hankkeen toteuttamisajankohtaa voidaan arvioida vasta siinä vaiheessa, kun hanke päätetään toteuttaa ja se viedään tienpidon ja liikenteen suunnitelmaan. Ennen toteutusta hankkeesta laaditaan tiesuunnitelma ja asiakirjat rakentamista varten
Resumo:
Os leiomiomas uterinos caracterizam-se por doença benigna e são evidenciados em 2 a 3% de todas as gestações normais. Destes, cerca de 10% podem apresentar complicações durante a gravidez. Apresentamos um caso de paciente gestante que procurou o pronto-socorro obstétrico na 17ª semana, queixando-se de fortes dores, apresentava palpação abdominal dolorosa e descompressão brusca positiva. À ultrassonografia, apresentava nódulo de mioma medindo 9,1 x 7,7 cm, foi internada, medicada e devido à piora do quadro, submetida a laparotomia exploradora e miomectomia. O seguimento pré-natal se deu sem mais anormalidades, com resolução da gestação na 39ª semana. O recém-nascido pesou 3.315 g com Apgar 9 e 10. Deve-se sempre tentar o tratamento clínico nesses casos, e intervenções cirúrgicas devem ser consideradas para casos selecionados, principalmente na impossibilidade de tratamentos conservadores ou quando o quadro clínico da paciente exige intervenção imediata. Neste caso, a miomectomia mostrou-se eficaz para complicações obstétricas materno-fetais.