Multiobjective optimization of cold-formed steel columns

The optimal design of cold-formed steel columns is addressed in this paper, with two objectives: maximize the local-global buckling strength and maximize the distortional buckling strength. The design variables of the problem are the angles of orientation of cross-section wall elements the thickness and width of the steel sheet that forms the cross-section are fixed. The elastic local, distortional and global buckling loads are determined using Finite Strip Method (CUFSM) and the strength of cold-formed steel columns (with given length) is calculated using the Direct Strength Method (DSM). The bi-objective optimization problem is solved using the Direct MultiSearch (DMS) method, which does not use any derivatives of the objective functions. Trade-off Pareto optimal fronts are obtained separately for symmetric and anti-symmetric cross-section shapes. The results are analyzed and further discussed, and some interesting conclusions about the individual strengths (local-global and distortional) are found.

Velocity estimation of moving ships using C-band SLC SAR data

A new algorithm for the velocity vector estimation of moving ships using Single Look Complex (SLC) SAR data in strip map acquisition mode is proposed. The algorithm exploits both amplitude and phase information of the Doppler decompressed data spectrum, with the aim to estimate both the azimuth antenna pattern and the backscattering coefficient as function of the look angle. The antenna pattern estimation provides information about the target velocity; the backscattering coefficient can be used for vessel classification. The range velocity is retrieved in the slow time frequency domain by estimating the antenna pattern effects induced by the target motion, while the azimuth velocity is calculated by the estimated range velocity and the ship orientation. Finally, the algorithm is tested on simulated SAR SLC data.

Desenvolvimento de sistema de apoio dinâmico da chapa no corte em guilhotina

Guilhotinas são máquinas robustas, de corte rectilíneo, normalmente associadas a equipamentos de baixo custo, devido à pequena quantidade de dispositivos tecnológicos incorporados. No entanto, esta situação pode ser alterada através da criatividade dos projetistas deste tipo de equipamento. Analisando algumas operações específicas, pode-se observar que algumas ferramentas, quando associadas ao equipamento, podem aumentar substancialmente a produtividade do processo de corte e a qualidade do produto final. Em relação ao processo de corte de chapas finas de metal, pode-se observar que na fase final de corte, o peso do material a cortar é suspenso por uma pequena porção de material que ainda não foi sujeita ao corte. Este facto leva a uma deformação plástica nesta última zona, causando problemas de qualidade no produto final, que não ficará completamente plano. Este trabalho foi desenvolvido em torno deste problema, estudando a melhor solução para desenvolver uma nova ferramenta, capaz de evitar a falta de nivelamento da placa, após corte. Um novo equipamento foi concebido, capaz de ser facilmente incorporado na guilhotina, permitindo o acompanhamento da inclinação da lâmina durante a operação de corte. O sistema é totalmente automatizado, sendo operado por uma única instrução de corte dada pelo operador da máquina. Este sistema permite à empresa fabricante aumentar o valor agregado de cada máquina, oferecendo aos clientes soluções avançadas, contribuindo desta forma para a sustentabilidade do negócio da empresa.

Serologic survey for hantavirus infections among wild animals in rural areas of São Paulo State, Brazil

A serosurvey was conducted in wild animals captured close to two areas where hantavirus cardiopulmonary syndrome (HCPS) occurred in São Paulo State, Brazil. Serum samples from a total of 43 mammals were tested for antibodies reactive with Sin Nombre (SN) hantavirus using a strip immunoblot assay. RNAs from the blood clots of the positive samples were submitted to reverse transcriptase-polymerase chain reaction (RT-PCR). Two rodents of the genus Oligoryzomys were positive for hantavirus antibodies. These animals were captured in the Iguape region and represented 16.7% (2/12) of the sera from rodents and 100.0% (2/2) of the Oligoryzomys captured in that area. RT-PCR failed to amplify any viral cDNA. These results are in agreement with other data that suggest that members of this genus are important reservoirs of hantaviruses in Brazil.

Writing and living on the stage of history

This article studies the intercultural trajectory of a Portuguese female aristocrat of the eighteenth to nineteenth centuries. Her trajectory of intercultural transition from a Portuguese provincial lady into an independent owner of a sugar mill in tropical Bahia is documented through family letters, which provide a polyphonic representation of a movement of personal, family, and social transculturation over almost two decades. Maria Bárbara began her journey between cultures as a simple spectator-reader, progressively becoming a commentator-actor-protagonist-author in society, in politics, and in history. These letters function as a translation that is sometimes consecutive, other times simultaneous, of the events lived and witnessed. This concept of intercultural translation is based on the theories of Boaventura de Sousa Santos (2006, 2008), who argues that cultural differences imply that any comparison has to be made using procedures of proportion and correspondence which, taken as a whole, constitute the work of translation itself. These procedures construct approximations of the known to the unknown, of the strange to the familiar, of the ‘other’ to the ‘self’, categories which are always unstable. Likewise, this essay explores the unstable contexts of its object of study, with the purpose of understanding different rationalities and worldviews.

Análise do comportamento de um navio utilizando a teoria das faixas

Dissertação para obtenção do Grau de Mestre em Engenharia Mecânica

Minimização do impacto ambiental do processo de curtume de pele de bovino

O presente trabalho teve como objectivo a minimização do impacto ambiental do processo de curtume da pele de bovino. A indústria de curtumes transforma a pele, material putrescível, em couro, material nobre, termicamente estável e imputrescível. A transformação da pele em couro origina uma carga poluente apreciável quer quanto a efluentes líquidos quer quanto a resíduos sólidos. O fluxo produtivo da indústria de curtumes pode dividir-se em quatro sectores: ribeira, curtume, tinturaria e acabamento, sendo que os três primeiros geram efluentes líquidos com elevada carga poluente. Neste trabalho, foram avaliadas as fases do processo que geram efluentes líquidos: molho, caleiro, curtume e tinturaria. Na avaliação do processo do molho testou-se uma protease e uma lipase contra um molhante e um desengordurante tradicional, agentes químicos normalmente utilizados no molho mas menos biodegradáveis que as enzimas testadas. Salienta-se o bom resultado obtido quanto à eficiência do molho Na avaliação do processo de caleiro testaram-se várias alternativas no sentido da redução da quantidade de sulfureto de sódio utilizada e da minimização da carga poluente. Entre as alternativas, depilação por oxidação, depilação enzimática com e sem destruição do pêlo, elegeu-se a depilação enzimática sem destruição do pêlo que conduziu a resultados com menor impacto ambiental, nomeadamente a redução da % da quantidade de sulfureto de sódio, sendo a redução da carga poluente de 4,19 % de sulfureto, 32.80% de sólidos suspensos totais (SST),27.09% de sólidos totais (ST) e de 76.90% da carência química de oxigénio (CQO) no efluente de caleiro. No processo do curtume da pele é utilizado crómio como agente de curtume em cerca de 80% das peles tratadas, sendo este metal problemático em termos ambientais. No sentido de reduzir a quantidade de crómio utilizada no processo foi realizado um planeamento factorial onde as variáveis a estudar foram a concentração de crómio e a temperatura, tendo este como objectivo observar qual a quantidade mínima de crómio necessária para termos um produto final nas condições desejadas e gerando um menor impacto ambiental. Concluiu-se desenvolvendo um processo que mostra ser possível reduzir a quantidade de sal de crómio de 7% para 5%, além de ter um impacto ambiental claramente menos agressivo nos efluentes de curtume gerado. Este processo quando comparado com o processo tradicional permite a redução de 27% na CQO, 79% nos SST, 11% nos ST e 38% no teor de crómio Na avaliação do processo de tinturaria foi estudado um processo compacto contra o processo tradicional, tendo-se concluído pelo menor impacto ambiental do processo estudado, nomeadamente ao nível da redução do consumo de água e da carga poluente gerada. A comparação dos dois processos, no que respeita à carga poluente gerada, permitiu concluir por uma redução de 39% da CQO, 50% dos SST, e 12% dos ST quando aplicado o processo compacto Por fim foi feita uma avaliação do impacto ambiental do efluente global gerado pelos processos considerados com menor impacto ambiental contra o processo tradicional, normalmente aplicado na indústria. A aplicação do conjunto dos processos desenvolvidos, quando comparada com a aplicação do conjunto dos processos tradicionais, mostra uma redução de 1% no sulfureto, 40% na CQO, 60 % nos SST, 42 % no crómio e 11% nos ST, mostrando claramente que é possível reduzir a carga poluente da indústria de curtumes atuando no processo. Este trabalho mostrou a importância de atuar no processo para minimizar os custos de tratamento e mesmo de investimento dos efluentes da indústria de curtumes. Importa salientar que os processos desenvolvidos necessitam de validação a uma escala semi-industrial.

Insights into the role of almond CBF transcription factors in the environmental control of cold acclimation and dormancy break

Dissertation presented to obtain the Ph.D degree in Biology

Revisão do género Lavandula presente em Portugal Continental

Dissertação para obtenção do Grau de Mestre em Bioquímica

Diagnosing human asymptomatic visceral leishmaniasis in an urban area of the State of Minas Gerais, using serological and molecular biology techniques

A population-based cross-sectional study was set up in Sabará country, Southeastern Brazil, to identify asymptomatic human visceral leishmaniasis in an urban area of low disease prevalence. Blood was collected on filter paper (n=1,604 inhabitants) and examined by indirect immunofluorescent test, enzyme-linked immunosorbent assay and immunochromatographic strip test. The prevalence rates of infection ranged from 2.4 to 5.6% depending on the test used. One year later, venous blood was collected in a subset of 226 participants (102 seropositive and 124 seronegative). The tests performed were IFAT, ELISA, rk39-ELISA, polymerase chain reaction and hybridization with Leishmania donovani complex probe. No clinical signs or symptoms of leishmaniasis were observed. Using hybridization as a reference test, the sensitivity and specificity of serology were respectively: 24.8 and 71% (ELISA); 26.3 and 76.3% (rk-39); 30.1 and 63.4% (IFAT). Due to disagreements, different criteria were tested to define the infection and hybridization should be considered in epidemiological studies.

Modelling of a wastewater treatment plant using GPS-X

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Analysis and treatment of a nineteenth century oil painting

This thesis focused on the study and treatment of a 19th century female portrait in oil from ECOMUSEU Municipal do Seixal, Portugal. The portrait, which depicts Isabel Maria Lourenço Affonso was in poor condition and a large strip of paint and canvas was missing (approximately 9cm by 66cm, almost 11% of the total surface area). The portrait is a companion piece to a male portrait (the relationship was established as part of this study), therefore a technical study of both paintings was considered essential to support the choices made during the treatment. The project involved three main areas: - The study of the history, condition, materials and techniques of both paintings. This allowed their comparison and understanding of their relationship; - The treatment of Isabel Maria Lourenço Affonso. The choices made and problems encountered are described. - The production of a replacement for the missing strip of paint and canvas. The practical solution developed to overcome such an unusual challenge is described along with the creative and flexible thinking required. Because not all traditional infill materials cope well on a mechanical level with thin layers over a very large surface (many are too brittle), strict criteria had to be employed to choose the appropriate material. The primary goal was to find a fill which would remain flexible and be capable of accepting surface texture, such that there would be a good visual match with the painting. Analysis and testing was carried out to evaluate the physical properties of the fill material chosen, BEVA® Gesso-P. The successful creation of the replacement strip has resulted in two publications and one presentation: Publication pending in The Picture Restorer, Leslie Carlyle, Raquel Marques, Isabel Pombo Cardoso and Sara Babo, “Creating a Textured Replacement Strip for the Missing Lower Portion of an Oil Portrait: Problem Solving and Practical Solutions”. Abstract accepted for presentation and publication, International Meeting on Retouching of Cultural Heritage (2RECH), Raquel Marques, Leslie Carlyle and Isabel Pombo Cardoso, “Textured Replacement Strip for a Missing Portion of a Portrait: Problem Solving and Practical Solutions”.

Experimental determination of bone cortex holding power of orthopedic screw

Cylindrical specimens of bone measuring 15 mm in diameter were obtained from the lateral cortical layer of 10 pairs of femurs and tibias. A central hole 3.2 mm in diameter was drilled in each specimen. The hole was tapped, and a 4.5 mm cortical bone screw was inserted from the outer surface. The montage was submitted to push-out testing up to a complete strip of the bone threads. The cortical thickness and rupture load were measured, and the shear stress was calculated. The results were grouped according to the bone segment from which the specimen was obtained. The results showed that bone cortex screw holding power is dependent on the bone site. Additionally, the diaphyseal cortical bone tissue is both quantitatively and qualitatively more resistant to screw extraction than the metaphyseal tissue.

Glycemia in newborns of hypertensive mothers according to maternal treatment

PURPOSE: To evaluate the evolution of glycemic levels in newborns of hypertensive mothers according to maternal treatment. METHODS: Prospective randomized study, including 93 newborns of mothers treated with isradipine (n = 39), atenolol (n = 40), or low sodium diet (control group - n=14). Glycemia was determined at birth (mother and newborn by the oxidase glucose method) and in the 1st, 3rd, 6th, 12th, and 24th hours after birth (newborn by a test strip method). The evolution of glycemia was analyzed in each group (Friedman test). The groups were compared regarding glycemia (Kruskall-Wallis test), and linear regression models were constructed for the analyses (independent variable = maternal glycemia; dependent variables = umbilical cord, 3rd, and 6th hour glycemia). RESULTS: There were no statistically significant differences among the mean blood glucose levels of the 3 groups in any of the assessments. There was a correlation between maternal and umbilical cord blood glucose in the isradipine (r = 0.61; P <.05) and control (r = 0.84; P <.05) groups. Regarding glycemia levels of the mothers and newborns in the third and sixthhours postpartum, this correlation was present only in the control group (maternal x third hour: r = 0.65; P <.05; maternal x sixth hour: r = 0.68; P <.05). There were no correlations in the atenolol group. Hypoglycemia was detected in 51.3% of the isradipine group, 60% of the atenolol group, and 35.7% of the control group, and it was more frequent in the first hour postpartum in all groups. CONCLUSIONS: The results suggest a similar effect of the 3 types of treatment upon newborn glycemia. The correlation analysis suggests that isradipine could have effects upon newborn glycemia only after birth (correlation only in umbilical cord blood), whereas atenolol could act earlier (there was no correlation at any moment). The results also point to the need for glycemic control from the first hour postpartum of newborns of hypertensive mothers whether they have or have not undergone treatment with antihypertensive drugs.

O Elvis de Macau. Relatos de uma distopia na China

A explosão de Macau nos últimos dez anos deve-se a um conjunto de factores, que este texto procura descrever, propondo uma necessária reflexão. Depois da liberalização do jogo em 2001/2002, o Sands Macau inaugura, em 2004, como o primeiro casino da nova vaga. Em 2005, Macau é Património Mundial da Humanidade pela UNESCO. O Cotai é inicialmente um projecto da administração portuguesa como uma nova cidade para 150 000 habitantes. O Cotai Strip nasce de uma epifania de Sheldon Adelson, chairman da Las Vegas Sands Corporation, em 2003. Em 2007, o Venetian inaugura como “flagship” do Cotai Strip e, em 2011, o Galaxy amplia a dimensão delirante da arquitectura do jogo. No pós-Portugal, a condição de Macau como espaço híbrido, colonizado, transitório, aumenta exponencialmente enquanto “Região Administrativa Especial” da República Popular da China. Macau é hoje uma distopia suave, corporizada nos casinos; uma vida subterrânea que se expressa no skyline.