Synthesis of high surface area TiO2 nanoparticles by mild acid treatment with HCl or HI for photocatalytic propene oxidation

Nanostructured TiO2 photocatalysts with small crystalline sizes have been synthesized by sol-gel using the amphiphilic triblock copolymer Pluronic P123 as template. A new synthesis route, based on the treatment of TiO2 xerogels with acid-ethanol mixtures in two different steps, synthesis and extraction-crystallization, has been investigated, analyzing two acids, hydrochloric and hydriodic acid. As reference, samples have also been prepared by extraction-crystallization in ethanol, being these TiO2 materials amorphous and presenting higher porosities. The prepared materials present different degrees of crystallinity depending on the experimental conditions used. In general, these materials exhibit high surface areas, with an important contribution of microporosity and mesoporosity, and with very small size anatase crystals, ranging from 5 to 7 nm. The activity of the obtained photocatalysts has been assessed in the oxidation of propene in gas phase at low concentration (100 ppmv) under a UVA lamp with 365 nm wavelength. In the conditions studied, these photocatalysts show different activities in the oxidation of propene which do not depend on their surface areas, but on their crystallinity and band gap energies, being sample prepared with HCl both during synthesis and in extraction-crystallizations steps, the most active one, with superior performance than Evonik P25.

Structural and photoelectrochemical properties of porous TiO2 nanofibers decorated with Fe2O3 by sol-flame

The hybrid structure of Fe2O3 nanoparticles/TiO2 nanofibers (NFs), combines the merits of large surface areas of TiO2 NFs and absorption in ultraviolet light–visible light range. This structure can be used for many applications such as photoelectrochemical water splitting and photo-catalysis. Here, a sol-flame method is used for depositing Fe2O3 on TiO2 NFs that were prepared by hydrothermal on Ti sheets. The obtained materials were characterized by XRD, SEM, UV/Vis diffuse reflectance, Raman, and XPS. The results revealed the formation of rutile and anatase crystalline phases together with Fe2O3. This process moves the absorption threshold of TiO2 NFs support into visible spectrum range and enhances the photocurrent in comparison to bare TiO2 NFs, although no hole scavenger was used. The impedance measurement at low and high frequencies revealed an increase in series resistance and a decrease in resistance of charge transfer with sol-flame treatment time. A mechanism for explaining the charge transfer in these TiO2 NFs decorated with Fe2O3 nanoparticles was proposed.

Non-covalent immobilization of RhDuphos on carbon nanotubes and carbon xerogels

The immobilization of the chiral complex RhDuphos, by electrostatic or π–π (adsorption) interactions, on carbon nanotubes and carbon xerogels is investigated. To promote such interactions, the supports were either oxidized or heat treated to create carboxylic type surface groups or an apolar surface, respectively. The catalysts were tested in the hydrogenation of methyl 2-acetamidoacrylate. The prepared hybrid catalysts are less active than the homogeneous RhDuphos, but most of them show a high enantioselectivity and the one prepared with the oxidized carbon xerogel is also reusable, being able to give a high substrate conversion, keeping as well a high enantioselectivity. The anchorage by electrostatic interactions is more interesting than the anchorage by π–π interactions, as the π–π adsorption method produces a modification of the metal complex structure leading to an active hybrid catalyst but without enantioselectivity. The creation of carboxylic groups on the support surface has led to some hindering of the complex leaching.

Enhancement of the Electrochemical Performance of SWCNT dispersed in a Silica Sol-gel Matrix by Reactive Insertion of a Conducting Polymer

The electroassisted encapsulation of Single-Walled Carbon Nanotubes was performed into silica matrices (SWCNT@SiO2). This material was used as the host for the potentiostatic growth of polyaniline (PANI) to yield a hybrid nanocomposite electrode, which was then characterized by both electrochemical and imaging techniques. The electrochemical properties of the SWCNT@SiO2-PANI composite material were tested against inorganic (Fe3+/Fe2+) and organic (dopamine) redox probes. It was observed that the electron transfer constants for the electrochemical reactions increased significantly when a dispersion of either SWCNT or PANI was carried out inside of the SiO2 matrix. However, the best results were obtained when polyaniline was grown through the pores of the SWCNT@SiO2 material. The enhanced reversibility of the redox reactions was ascribed to the synergy between the two electrocatalytic components (SWCNTs and PANI) of the composite material.

Desiccant capability of organic xerogels: Surface chemistry vs porous texture

Resorcinol-Formaldehyde xerogels are organic polymers that can be easily tailored to have specific properties. These materials are composed of carbon, hydrogen and oxygen, and have a surface that is very rich in oxygen functionalities, and is therefore very hydrophilic. Their most interesting feature is that they may have the same chemical composition but a different porous texture. Consequently, the influence of porous characteristics, such as pore volume, surface area or pore size can be easily assessed. In this work, a commonly used desiccant, silica gel, is compared with organic xerogels to determine their rate and capacity of water adsorption, and to evaluate the role of surface chemistry versus porous texture. It was found that organic xerogels showed a higher rate of moisture adsorption than silica gel. Pore structure also seems to play an important role in water adsorption capacity. The OX-10 sample, whose porosity was mainly composed of micro-mesoporosity displayed a water adsorption capacity two times greater than that of the silica gel, and three times higher than that of the totally macroporous xerogel OX-2100. The presence of feeder pores (mesopores) that facilitate the access to the hydrophilic surface was observed to be the key factor for a good desiccant behaviour. Neither the total pore volume nor the high surface area (i.e. high microporosity) of the desiccant sample, is as important as the mesopore structure.

Estrategias determinantes para la competitividad de un destino de sol y playa. El caso de Mazatlán, Sinaloa, México

El presente estudio se realizó con el propósito de dar un entendimiento global de la situación actual en lo referente a la competitividad de Mazatlán como destino turístico; conocer las particularidades del destino permite aplicar procedimientos innovadores y participativos en la búsqueda de competitividad, lo que favorece un mejor desarrollo turístico. El principal valor de esta investigación radica en la necesidad de identificar las estrategias para lograr competitividad y convertir el turismo de sol y playa en una palanca de desarrollo económico y generadora de empleos. El estudio se realizó bajo la perspectiva metodológica cualitativa ejecutada a través de diferentes métodos; por un lado, el enfoque de triangulación implicó análisis documental para contextualizar la competitividad turística del destino y por otro lado, análisis de datos generados de las discusiones en grupos focales con los actores de la actividad turística del destino. Se revisaron los fundamentos teóricos de la competitividad sistémica, con referencia especial al Índice de Competitividad Sistémica de las Ciudades Mexicanas (ICSar-ciudades) únicamente para definir indicadores o categorías analíticas que fueron incluidos en la discusión (marco regulatorio, ambiente de negocios e infraestructura y recursos humanos, culturales y naturales). Entre los principales resultados, se destaca la necesidad empaquetar los atractivos turísticos del destino, lo cual permita constituir un producto turístico, tarifado y publicado como un elemento completo; la necesidad de contar con adecuados canales de distribución y comercialización; un adecuado sistema de movilidad en el destino que cubra las necesidades de los turistas; el fortalecimiento de la infraestructura turística para maximizar los flujos turísticos; colaboración de todos los niveles de gobierno e Instituciones, sectores públicos o privados en el diseño e implementación de planes de marketing.

Participatory approaches in the management of Natura 2000: when EU biodiversity policy gets closer to its citizens. Bruges Political Research Paper No. 26/May 2012

The Habitats Directive has created a European network of protected areas combining environmental protection with social and economic activities. Although not clearly advocated in the Directive, participatory approaches have incrementally emerged in order to ensure an adequate management of the Natura 2000 network. This paper looks at the reasons why the European Commission on one side and the national/local authorities on the other side chose to engage in participatory approaches and assesses the structure, degree and scope of these approaches in the light of input and output legitimacy. Main findings are that participation was mostly implemented as a reaction to conflicts and out of a concern over policy implementation, two elements that continue to drive the philosophy of the Natura 2000 network‘s management. The limits of participation in Brussels are contrasted with the potential for more genuine and effective participation mechanisms on the field.

Ireland gets the new Trio Presidency off to a propitious start. CEPS Commentary, 30 August 2013

The Irish Presidency of the Council of the EU (January-June 2013) faced numerous challenges, not least of which was to negotiate the financial framework for the period 2014-2020 and the reform of the Common Agricultural Policy with the European Parliament, as well as the pressure to advance the banking agenda. Moreover, the fact that it was the start of a new Trio Presidency, the small size of the Irish administration and its fragile financial situation gave rise to some doubts as to how much it could achieve. Nevertheless, this post mortem on the Irish presidency finds that the Irish government approached the task with realism and optimism, a firm focus on results and the strong conviction that a good performance would enhance its reputation at home and in the EU. It is now for Lithuania and subsequently Greece, in the first half of 2014, to continue to tackle the remaining formidable challenges.