Implementação de um plano de segurança de águas num hospital

Dissertação de Natureza Científica para obtenção do grau de Mestre em Engenharia Civil

Erros de comunicação entre Protésicos e Médicos Dentistas

Este trabalho consiste numa revisão de literatura sobre os erros de comunicação entre dois grupos de profissionais, cujos trabalhos na área da Medicina Dentária se complementam: o Médico Dentista (MD) e o Técnico de Prótese Dentária (TPD). A comunicação entre estes dois grupos é o um fator muito importante e deve existir uma boa sinergia para que o trabalho seja executado com o maior rigor e qualidade possível. Esta pressupõe aspetos funcionais, biomecânicos, estruturais e estéticos, da reabilitação a realizar, potenciando deste modo a máxima de qualquer tratamento médico: a satisfação do paciente. O objetivo que se propõe é expor os erros decorrentes de falhas de comunicação e alertar os MD e TPD para a mudança do nível de colaboração. É também objetivo desmistificar a postura dos MD em relação à Prótese Dentária. O culminar deste trabalho de equipa traduz-se na promoção da Saúde Oral e melhor qualidade de vida dos pacientes. As falhas na comunicação são o principal entrave ao sucesso da reabilitação protética, pois impedem a conjugação dos conhecimentos científicos e técnicos de ambos os profissionais perpetuando erros ao longo das etapas de fabrico. Com base numa pesquisa relacionada com a comunicação entre MD e TPD, utilizando-se as palavras-chave “dentist technician relationship”, “dentist technician communication”, “dentist technician survey”, “dental fixed architecture” e “dental technicians fabrication”, através dos motores de busca Pubmed, Scielo e Science Direct, foi realizada uma revisão de literatura com o intuito de avaliar a comunicação entre TPD e MD. Procurou-se caracterizar que tipos de erros que podem ser cometidos, bem como formas para melhorar a comunicação. Após a revisão, constatou-se que existe uma grande deficiência a nível de comunicação entre MD e TPD e que tal facto induz a que um trabalho perca em termos de qualidade. Também se verificou que os erros cometidos são a nível académico e profissional, proporcionando a que o trabalho final resulte na insatisfação do paciente, bem como dos profissionais envolvidos.

Tipos de adubação para a videira 'BRS - violeta' cultivada em latossolo vermelho no sudoeste do Paraná

The vineyard culture, in the Southwest of Paraná, has faced an evolution in recently years. However, some technical barriers has contained the expression of its full potential. Among which, the lack of scientific and technical support about the fertilization management and the fertility maintenance of production fields, is the most worrying. This fact, allied with the raising on the consumers demand for ecological correct products, are the motivations for the present study, whose main objective was to evaluate the effects of different fertilizer formulations, based on alternative nutrient sources, on grapevine yield and grape fruit quality, aiming at the improvement of those parameters and the maintenance of soil fertility. To achieve this goal, an experiment has been evaluated since 2008, at the experimental area of the Federal Technological University of Paraná, Campus Pato Branco, where ten treatments were being tested, combining or isolating shale derivates from other alternative nutrient sources. Those are the treatments: T1: Gafsa Rock Phosphate (GRP) + K2SO4; T2: GRP + RPB (Rock Powder Bioland®); T3: GRP + K2SO4 + LH (Laying Hen Litter); T4: GRP+ RPB + LH; T5: GRP + K2SO4 + MBR (Matrix Shale 3); T6: GRP + RPB + MBR; T7: GRP + K2SO4 + MBR + LH; T8: GRP + RPB + LH + MBR; T9: TSP (Triple Superphosphate) + Urea + KCl and T10: absolute control. The usage of fertilization, specially the alternative fertilization, improved soil fertility characteristics and also the yield on the last two evaluated harvests. The potassium sulfate improved the potassium availability on soil, while improved yield on the last three harvests. The MBR improved the phosphorus availability, improved post-harvest conservation and improved the yield on the last evaluated harvest.

O estágio extracurricular remunerado no cuidar da enfermagem nos hospitais de ensino

OLIVEIRA,Jonas Sâmi Albuquerque de; ENDERS, Bertha Cruz; MENEZES, Rejane Maria Paiva de MEDEIROS, Soraya Maria de. O estágio extracurricular remunerado no cuidar da enfermagem nos hospitais de ensino. Revista Gaúcha de Enfermagem, Porto Alegre(RS),v.30,n.2, p.311-8,jun.2009.

Flight tests of the ramjet on aircraft designed by N. N. Polikarpov in 1939-1940

Photocopied from an unknown journal or work.

Competition in the management of information through the use of ICT

This article presents a literature review on current issues in the field of library science, related to competence in the management and use of information, information technology and communication, information society and knowledge among others. It further seeks to highlight the importance of users to acquire these skills so they can deal effectively with decision-making, problem solving, conducting investigations and their own training. This is possible if the information and documentation systems as dynamic agents engaged to distribute scientific and technical knowledge.

Mechanical properties of adobe blocks used in building construction in Huambo Province - Angola

Despite significant advances in building technologies with the use of conventional construction materials (as concrete and steel), which significantly have driven the construction industry, earth construction have demonstrated its importance and relevance, as well as it has matched in an efficient and eco-friendly manner the social housing concerns. The diversity of earth construction techniques allowed this material to adapt to different climatic, cultural and social contexts until the present time. However, in Angola, the construction with earth is still associated with population fringes of weak economic resources, for which, given the impossibility of being able to acquire modern construction materials (steel, cement, brick, among others), they resort to the use of available natural materials. Furthermore, the lack of scientific and technical knowledge justifies the negative appreciation of traditional building techniques, and the derogatory way how are considered the earth constructions in Angolan territory. Given the country's current development status, and taking into account the environmental requirements and the real socio-economic sustainability of Angola, it is considered that one of the viable and adequate options, could be the recovering and upgrading of the ancestral techniques of earth construction. The purpose of this research is to develop the technical and scientific knowledge in order to improve and optimize these construction solutions, responding to the real problems of housing quality as well as to the current social, economic and environmental sustainability requirements. In this paper, a description of the physical and mechanical characteristics of the adobes typically used in the construction of traditional houses in some localities of Huambo, province in Angola, is carried out. The methodology was based on mechanical in-situ testing in adobe blocks manufactured with traditional procedures: i) tensile strength evaluated with the bending test and compressive strength test on earth blocks specimens; and, ii) durability and erodibility test by Geelong method adopting the New Zealand standard (NZS) procedures (4297: 1998; 4297: 1998 and 4297: 1999). The results allow the characterization of the materials used in the construction of raw earth in the Huambo region, contributing to the development of knowledge of these sustainable and traditional housing constructive solutions with a strong presence in Angola [1, 2]. This study is part of a larger project in the area of Earth Construction [3], which aims to produce knowledge which can stimulate the use of environmental friendly construction materials and contribute to develop constructive solutions with improved performance, durability, comfort, safety and sustainability.

An Informatics Technical Note on Interaction of DNA - Graphene Chemical Sensor System as Reaction-Diffusion Wave-Based Computing System in Ionised Gaseous environments and their Applications Using Theoretical Studies and Scientific Computation Overview

The physics of plasmas encompasses basic problems from the universe and has assured us of promises in diverse applications to be implemented in a wider range of scientific and engineering domains, linked to most of the evolved and evolving fundamental problems. Substantial part of this domain could be described by R–D mechanisms involving two or more species (reaction–diffusion mechanisms). These could further account for the simultaneous non-linear effects of heating, diffusion and other related losses. We mention here that in laboratory scale experiments, a suitable combination of these processes is of vital importance and very much decisive to investigate and compute the net behaviour of plasmas under consideration. Plasmas are being used in the revolution of information processing, so we considered in this technical note a simple framework to discuss and pave the way for better formalisms and Informatics, dealing with diverse domains of science and technologies. The challenging and fascinating aspects of plasma physics is that it requires a great deal of insight in formulating the relevant design problems, which in turn require ingenuity and flexibility in choosing a particular set of mathematical (and/or experimental) tools to implement them.

Contaminated sites and brownfield management State of art in Brazil and in Germany

Purpose - The aim of this paper is to briefly present aspects of public brownfield management policies from Brazilian and German points of view. Design methodology approach - The data collection method combined literature and documental research. The bibliography included Brazilian and German literature about brownfield management. The documental research includes Brazilian and German legislation and official documents published by CETESB, the Environmental Company of the State of São Paulo, Brazil. Furthermore, publications of German governmental research institutions have been integrated in the paper. Findings - In Brazil, despite the lack of a federal public policy, the State of São Paulo has approved specific rules to deal with contaminated sites. Topics that could be targets of scientific studies have been identified. Experiences in Germany show that it is essential to have political will and cooperation between the different political levels and technical disciplines. Partnerships between German and Brazilian universities would be welcome as there is a wide range of opportunities for academic post-graduation studies and research focusing on human resources capacitation in environmental management. Originality value - The paper makes an original contribution of exploring an area (brownfield management) that is at the forefront of discussion in academe and industry

Research Quality, Publications and Impact in Hydraulic Engineering into the 21st Century. Publish or Perish, Commercial versus Open Access, Internet versus Libraries

One of the main objectives of the first International Junior Researcher and Engineer Workshop on Hydraulic Structures is to provide an opportunity for young researchers and engineers to present their research. But a research project is only completed when it has been published and shared with the community. Referees and peer experts play an important role to control the research quality. While some new electronic tools provide further means to disseminate some research information, the quality and impact of the works remain linked with some thorough expert-review process and the publications in international scientific journals and books. Importantly unethical publishing standards are not acceptable and cheating is despicable.

Scientific production on workplace bullying/harassment in dissertations and theses in the Brazilian scenario

OBJECTIVE To analyze scientific production about workplace bullying and harassment in dissertations and theses in Brazil, with emphasis on the year of publication; educational institution; area of knowledge; professional and academic background of the authors; keywords used; and concept map organization. METHOD Bibliometric study with a quantitative approach with a sample consisting of 57 papers, 5 theses and 52 dissertations, published between 2002 and 2012. RESULTS It was found that 2012 was the year with the highest number of publications in this topic area. The region that stood out was the Southeast. The institution with the highest number of publications was the Federal University of Santa Catarina. There was a predominance of dissertations and most publications were produced by researchers focused on a multidisciplinary perspective. CONCLUSION Expanding the views regarding bullying in order to disseminate scientific production was proposed, promoting further advancement of debates and raising pertinent questions.

DOI: The "Big Brother" in the dissemination of scientific documentation

Rapid growth in the availability and use of digital documents has prompted the development of instruments to handle them. A most important example of these instruments are digital identifiers, which provide a codification system that allows digital items, usually up to the level of a computer file, to be singled out and located. Digital identifiers make up standardized global systems applied to specific products or areas. They are part of the very many identifiers developed to handle large numbers of items and large amounts of information for transactional purposes, which often have a global span. Digital identifiers include the ubiquitous Global Trade Item Number (GTIN), a code that unequivocally identifies trade items all around the world. The GTIN can take on several configurations depending on its application. These include: EAN-13, EAN-8, EAN-14, and UCC-12. EAN-13 is the code used for retail products in order to facilitate trade at the point of sale; its widely known symbol or graphical form is the EAN/UPC-13 bar code...