Subjectivity in the valuation : Case study on the Finnish biotechnology industry

The thesis combines valuation and behavioral economics literature, which is not common among the Finnish management accounting research. Furthermore, the valuation is studied in biotechnology context and those type of studies are rather rare as well. The thesis studies the valuation in the Finnish biotechnology industry. The concepts of behavioral finance are employed in the empirical part of the study to explore decision-makers’ behavior in valuation processes. The main interest of this study is to explore how subjectivity of a decision-maker affects the valuation in the biotechnology industry. The valuation is studied from two perspectives. First, what is the best valuation model for biotechnology companies suggested by the valuation literature? Second, how the valuation in biotechnology industry is done in practice and how the decision-makers subjectivity affects the valuation? The literature review aims at seeking the best valuation model. The real options were found to be the most suitable valuation model for biotechnology companies, especially in the early stages of product development. The real option’s ability to take the value of the inherent options into account results in theoretically most correct valuations. The only disadvantage is the model’s complexity when compared to other models, such as discounted cash flow models. The empirical part of the study consists of a case study, which examines the valuation practices of the Finnish biotechnology companies. When it comes to the valuation models used in practice, it was found that the companies were using rather simple valuation models, which was due to two reasons. First, the interviewees did not believe in the valuation models and second, they were familiar neither with the most sophisticated models nor with all the theoretical aspects of the models they were using. The material for the study was collected with theme interviews. Four CEO’s of highly successful Finnish biotechnology companies. Strong signs of the decision-makers’ subjectivity in valuation were observed. Most obvious were the signs of framing. Furthermore, herding, excessive optimism, and overconfidence were present. All the behavioral concepts observed most likely have a severe effect on the valuation. As a result, the valuation can easily become overly optimistic, which leads to overvalued investments and to continuation of already unprofitable projects. Framing had the strongest evidence. If the product being valued is framed successfully, the risk of overvaluation is high, thus a strong belief can justify almost any value.

Strategic outsourcing of R&D: The location-specific advantages of India to the pharmaceutical industry

Companies are increasingly under pressure to be more efficient both in terms of costs and overall performance and thus, they seek new ways to develop their products and innovate. For pharmaceutical industry it can take several decades to launch a new drug to the markets. Since pharmaceutical industry is one of the most research-intensive industries, is outsourcing one way to enhance the R&D processes of such companies. It is said that outsourcing to offshore locations is vastly more challenging and complicated than any other exporting activity or inter-company relationship that has evoked a lot of discussion. By outsourcing strategically, companies must also thoroughly focus on transaction costs and core competences. Today, the suppliers are looked for beyond national boundaries and furthermore, the location of the outsourcing activity must also be thoroughly considered. Consequently, the purpose of this study is to analyze what is known of strategic outsourcing of pharmaceutical R&D to India. In order to meet the purpose of the study, this study tries to answer three sub-questions set to it: first, what is strategic outsourcing, second, why pharmaceutical companies utilize strategic outsourcing of R&D and last, why pharmaceutical companies select India as the location for outsourcing their R&D. The study is a qualitative study. The purpose of the study was approached by a literature review with systematic elements and sub-questions were analyzed through different relevant theories, such as theory of transaction costs, core competences and location advantages. Applicable academic journal articles were comprehensively included in the study. The data was collected from electronic journal article databases using key words and almost only peer-reviewed, as new as possible articles were included. Also both the reference list of the included articles and article recommendations from professionals generated more articles for inclusion. The data was analyzed through thematization that resulted in themes that illuminate the purpose of the study and sub-questions. As an outcome of the analysis, each of the theory chapters in the study represents one sub-question. The literature used in this study revealed that strategic outsourcing of R&D is increasingly used in pharmaceutical industry and the major motives to practice it has to do with lowering costs, accessing skilled labor, resources and knowledge and enhancing their quality while speeding up the introduction of new drugs. Mainly for the above-mentioned motives India is frequently chosen as the target location for pharma outsourcers. Still, the literature is somewhat incomplete in this complex phenomenon and more research is needed.

Translational research : pharmaceutical industry view

Translationaalinen lääketutkimus ja -kehitys.

Observations of Industry Momentum Effect in European Equity Indices

This thesis examines the existence and nature of momentum effect in European equity indices. A set of predefined indicators is used to compose momentum portfolios and different holding periods are used to test the strategies over variable time periods as well as under different economical conditions. The data consists of daily closing prices of STOXX Europe 600 index and its 18 super sector indices. Over the study period we follow the performances of a long position in the Winner portfolio, a position in the market neutral zero-cost portfolio and also a position in the risk-controlled zero-cost portfolio. The investment ratio of the risk-controlled zero-cost portfolio is negatively correlated with the realized market volatility. The results show that momentum effect is present in European industries and is most prominent in the short-term. Indicators that are based on short-term performance tend predict the over- and underperformers for the 1-month holding period more reliably than any other indicator/holding period combination. The examination of the strategies under different economical conditions shows that the market neutral approach can create significant returns in times of recession but in times of economic boom the long position in Winner portfolio outperforms the market neutral portfolio by an extensive margin.

Analysis of value drivers behind CRM adoption projects in financial services industry

This research is focused on deriving framework for the value thought for from the Customer Relationship Management system adopted by an enterprise operating in the financial services industry. It will analyze existing academic work to derive a conceptual value model, while applying secondary industry specific case studies provided by the CRM vendors to check the validity and commonality of these drivers. Furthermore this work locates the variances and correlation between value thought for from CRM system, scope of enterprise operations and size of the enterprise.

Developing customer need based services in personal security service industry

The purpose of this thesis is to examine how services can be developed and how the voice of the customer can be incorporated to the strategic planning of services. Furthermore, the objective is to investigate the methods of customer need analysis and service bundling. The data is collected from secondary and primary sources by reviewing the existing academic literature and by conducting in-depth interviews and surveys. The main findings of this research indicate that the service development in personal security service industry should be conducted through a formalized process and the process should begin with setting the strategic objectives. Moreover, the voice of the customer should be incorporated into all stages of the development process, especially into the front-end of the process. Furthermore, the information on customer needs should be gathered in a manner tailored for the purposes of service development.

The demand for global student talent: Capitalizing on the value of university-industry collaboration

The university sector in Europe has invested money and effort into the internationalization of higher education. The benefits of internationalizing higher education are fuelled by changing global values, choices and practices. However, arguments that serve the internationalization of higher education tend to stress either local organizational or individual interests; seldom do they emphasize the societal benefits. This dissertation investigates how collaboration between university and industry facilitates a shift in thinking about attracting and retaining global student talent, in terms of co-creating solutions to benefit the development of our knowledge society. The macro-structures of the higher education sector have the tendency to overemphasize quantitative goals to improve performance verifiability. Recruitment of international student talent is thereby turned into a mere supply issue. A mind shift is needed to rethink the efficacy of the higher education sector with regard to retaining foreign student talent as a means of contributing to society’s stock of knowledge and through that to economic growth. This thesis argues that academic as well as industrial understanding of the value of university-industry collaboration might then move beyond the current narrow expectations and perceptions of the university’s contribution to society’s innovation systems. This mind shift is needed to encourage and generate creative opportunities for university-industry partnerships to develop sustainable solutions for successful recruitment of foreign student talent, and thereby to maximize the wealth-creating potential of global student talent recruitment. This thesis demonstrates through the use of interpretive and participatory methods, how it is possible to reveal new and important insights into university-industry partnering for enhancing attraction and retention of global student talent. It accomplishes this by expressly pointing out the central role of human collaborative experiencing and learning. The narratives presented take the reader into a Finnish and Dutch universityindustry partnering environment to reflect on the relationship between the local universities of technology and their operational surroundings, a relationship that is set in a context of local and global entanglements and challenges.

The effect of timing temporary cements to treat induced pulp necrosis in the teeth of dogs

During endodontic therapy (pulpectomy, root canal debridement and root canal filling) microbiological management is a major concern. Bacteria present in dentine tubules, apical foramina and apical delta are causally related to failure of the procedure. Studies have shown that during single session endodontic treatment bacteria remain within dental structures. The aim of the present study was to evaluate endodontic treatment performed as two sessions, using temporary endodontic dressing materials for different periods in four groups of experimental dogs. A total of 80 roots of second and third upper premolar teeth and second, third and fourth lower premolar teeth were divided into four groups. The pulp chamber was opened with burrs and the pulp exposed for 60 days to induce pulpal inflammation and necrosis. Groups II, III and IV were treated with calcium hydroxide plus camphorated paramono-chlorophenol (PMCC) for 7, 15 and 30 days, respectively. In all groups, the root canals were filled with zinc oxide-eugenol and gutta-percha cones. Clinical and radiographical measurements were performed every 2 weeks. After 60 days a small block section containing the teeth, surrounding periapical tissues and the periodontium was removed for histological and microbiological study. Histological analysis revealed intense inflammatory response in all groups. Microbiological analysis showed microbial reduction inversely proportional to the period of time that the intracanal temporary medicament was left in place.

Characterisation of Laser Beam and Paper Material Interaction

It is known already from 1970´s that laser beam is suitable for processing paper materials. In this thesis, term paper materials mean all wood-fibre based materials, like dried pulp, copy paper, newspaper, cardboard, corrugated board, tissue paper etc. Accordingly, laser processing in this thesis means all laser treatments resulting material removal, like cutting, partial cutting, marking, creasing, perforation etc. that can be used to process paper materials. Laser technology provides many advantages for processing of paper materials: non-contact method, freedom of processing geometry, reliable technology for non-stop production etc. Especially packaging industry is very promising area for laser processing applications. However, there are only few industrial laser processing applications worldwide even in beginning of 2010´s. One reason for small-scale use of lasers in paper material manufacturing is that there is a shortage of published research and scientific articles. Another problem, restraining the use of laser for processing of paper materials, is colouration of paper material i.e. the yellowish and/or greyish colour of cut edge appearing during cutting or after cutting. These are the main reasons for selecting the topic of this thesis to concern characterization of interaction of laser beam and paper materials. This study was carried out in Laboratory of Laser Processing at Lappeenranta University of Technology (Finland). Laser equipment used in this study was TRUMPF TLF 2700 carbon dioxide laser that produces a beam with wavelength of 10.6 μm with power range of 190-2500 W (laser power on work piece). Study of laser beam and paper material interaction was carried out by treating dried kraft pulp (grammage of 67 g m-2) with different laser power levels, focal plane postion settings and interaction times. Interaction between laser beam and dried kraft pulp was detected with different monitoring devices, i.e. spectrometer, pyrometer and active illumination imaging system. This way it was possible to create an input and output parameter diagram and to study the effects of input and output parameters in this thesis. When interaction phenomena are understood also process development can be carried out and even new innovations developed. Fulfilling the lack of information on interaction phenomena can assist in the way of lasers for wider use of technology in paper making and converting industry. It was concluded in this thesis that interaction of laser beam and paper material has two mechanisms that are dependent on focal plane position range. Assumed interaction mechanism B appears in range of average focal plane position of 3.4 mm and 2.4 mm and assumed interaction mechanism A in range of average focal plane position of 0.4 mm and -0.6 mm both in used experimental set up. Focal plane position 1.4 mm represents midzone of these two mechanisms. Holes during laser beam and paper material interaction are formed gradually: first small hole is formed to interaction area in the centre of laser beam cross-section and after that, as function of interaction time, hole expands, until interaction between laser beam and dried kraft pulp is ended. By the image analysis it can be seen that in beginning of laser beam and dried kraft pulp material interaction small holes off very good quality are formed. It is obvious that black colour and heat affected zone appear as function of interaction time. This reveals that there still are different interaction phases within interaction mechanisms A and B. These interaction phases appear as function of time and also as function of peak intensity of laser beam. Limit peak intensity is the value that divides interaction mechanism A and B from one-phase interaction into dual-phase interaction. So all peak intensity values under limit peak intensity belong to MAOM (interaction mechanism A one-phase mode) or to MBOM (interaction mechanism B onephase mode) and values over that belong to MADM (interaction mechanism A dual-phase mode) or to MBDM (interaction mechanism B dual-phase mode). Decomposition process of cellulose is evolution of hydrocarbons when temperature is between 380- 500°C. This means that long cellulose molecule is split into smaller volatile hydrocarbons in this temperature range. As temperature increases, decomposition process of cellulose molecule changes. In range of 700-900°C, cellulose molecule is mainly decomposed into H2 gas; this is why this range is called evolution of hydrogen. Interaction in this range starts (as in range of MAOM and MBOM), when a small good quality hole is formed. This is due to “direct evaporation” of pulp via decomposition process of evolution of hydrogen. And this can be seen can be seen in spectrometer as high intensity peak of yellow light (in range of 588-589 nm) which refers to temperature of ~1750ºC. Pyrometer does not detect this high intensity peak since it is not able to detect physical phase change from solid kraft pulp to gaseous compounds. As interaction time between laser beam and dried kraft pulp continues, hypothesis is that three auto ignition processes occurs. Auto ignition of substance is the lowest temperature in which it will spontaneously ignite in a normal atmosphere without an external source of ignition, such as a flame or spark. Three auto ignition processes appears in range of MADM and MBDM, namely: 1. temperature of auto ignition of hydrogen atom (H2) is 500ºC, 2. temperature of auto ignition of carbon monoxide molecule (CO) is 609ºC and 3. temperature of auto ignition of carbon atom (C) is 700ºC. These three auto ignition processes leads to formation of plasma plume which has strong emission of radiation in range of visible light. Formation of this plasma plume can be seen as increase of intensity in wavelength range of ~475-652 nm. Pyrometer shows maximum temperature just after this ignition. This plasma plume is assumed to scatter laser beam so that it interacts with larger area of dried kraft pulp than what is actual area of beam cross-section. This assumed scattering reduces also peak intensity. So result shows that assumably scattered light with low peak intensity is interacting with large area of hole edges and due to low peak intensity this interaction happens in low temperature. So interaction between laser beam and dried kraft pulp turns from evolution of hydrogen to evolution of hydrocarbons. This leads to black colour of hole edges.

The marketing communications industry in flux: Large B2C advertisers’ viewpoint

The recent digitization, fragmentation of the media landscape and consumers’ changing media behavior are all changes that have had drastic effects on creating marketing communications. In order to create effective marketing communications large advertisers are now co-operating with a variety of marketing communications companies. The purpose of the study is to understand how advertisers perceive these different companies and more importantly how do advertisers expect their roles to change in the future as the media landscape continues to evolve. Especially the changing roles of advertising agencies and media agencies are examined as they are at the moment the most relevant partners of the advertisers. However, the research is conducted from a network perspective rather than focusing on single actors of the marketing communications industry network. The research was conducted using a qualitative theme interview method. The empirical data was gathered by interviewing representatives from nine of the 50 largest Finnish advertisers measured by media spending. Thus, the research was conducted solely from large B2C advertisers’ perspective while the views of their other relevant actors of the network were left unexplored. The interviewees were chosen with a focus on variety of points of view. The analytical framework that was used to analyze the gathered data was built the IMP group’s industrial network model that consists of actors, their resources and activities. As technology driven media landscape fragmentation and consumers’ changing media behavior continue to increase the complexity of creating marketing communications, advertisers are going to need to rely on a growing number of partnerships as they see that the current actors of the network will not be able to widen their expertise to answer to these new needs. The advertisers expect to form new partnerships with actors that are more specialized and able to react and produce activities more quickly than at the moment. Thus, new smaller and more agile actors with looser structures are going to appear to fill these new needs. Therefore, the need of co-operation between the actors is going to become more important. These changes pose the biggest threat for traditional advertising agencies as they were seen as being most unable to cope with the ongoing change. Media agencies are in a more favorable position for remaining relevant for the advertisers as they will be able to justify their activities and provided value by leveraging their data handling abilities. In general the advertisers expect to be working with a limited number of close actors and in addition having a network of smaller actors, which are used on a more ad hoc basis.

Towards Inter-organizational Working Capital Management

Working capital is an investment which is tied up into the inventories and accounts receivable and which is released with accounts payable. Due to the current business landscape with tightened financial conditions and finance markets, organizations emphasize efficient working capital management. With efficient working capital management, a company can reduce the need of finance, free up cash, increase profitability, improve liquidity, increase the efficiency of operations, and decrease (financing) costs. From the perspective of an individual company, efficient working capital management means decreasing inventory levels by shortening the cycle time of inventories, decreasing accounts receivable by shortening the trade credit terms and effective collection procedures, and increasing the level of accounts payable by paying the suppliers later. From an inter-organizational perspective, however, working capital should not be sub-optimized by a single company but holistic view to working capital management through the supply chain should be adopted to create value and improve performance together. The purpose of this research is to take academic research as well as practical management towards inter-organizational working capital management. The thesis discusses the benefits as well as mechanisms of working capital management in the inter-organizational context and has two main objectives: (1) to examine the effect of inter-organizational working capital management on performance in the value chain context and (2) to develop models of working capital management for internal as well as inter-organizational value chains. The results of the archival research conducted in the value chain of the pulp and paper industry and the value chain of the automotive industry indicate that companies can increase relative profitability by managing working capital comprehensively by taking into account all three components, and holistically though the value chain. Companies in the value chain benefit from different strategies in working capital management depending on the position of the company in the value chain. This can be taken into account in inter-organizational working capital management. The effects of inter-organizational working capital management actions on the financing costs of working capital were studied via simulations. Simulations also show that the value chain and individual companies benefit from an inter-organizational view to working capital management. Inter-organizational working capital management actions include for example: shortening the cycle time of inventories, reducing product costs, shifting inventories, shortening payment terms, and considering the cost of capital. The thesis also provides solutions for the practical requirements for tools to control working capital. The design science part of the research introduces the adjusted cash conversion cycle (ACCC) model for internal value chains, as well as models for working capital management in the inter-organizational value chain context: the working capital management model (WCMM) and the financial cycle time model (FCTM) designed in corporation and product levels respectively. This research contributes to literature on working capital management and interorganizational accounting. The research gives a holistic, inter-organizational view to the management of working capital. It advances the knowledge in working capital management on operational level, increases knowledge in the recently risen theme of supply chainoriented, collaborative working capital management, combines management accounting research with supply chain management research, and contributes to the demand of practical inter-organizational accounting methods. In addition, the research has strong practical focus as new managerial methods are introduced.

Paperitehtaan sähkötasehallinta ja sähkön kysyntäjousto energiakustannusten hallinnassa

Paperiteollisuus on energiaintensiivistä teollisuutta, jossa on tehty pitkään työtä tuotantoprosessien energiatehokkuuden parantamiseksi. Paperitehtaan energiakustannuksiin voidaan kuitenkin vaikuttaa myös sähkötaseen hallinnalla ja sähkön kysyntäjouston avulla. Tehtaan seuraavan vuorokauden sähkön kulutus pyritään ennustamaan mahdollisimman tarkasti, mutta esimerkiksi paperitehtaan häiriötilanteissa sähkötase poikkeaa ennustetusta. Tällöin sähkötasetta voidaan korjata ensisijaisesti sähkön jälkimarkkinoiden eli Elbas- kaupankäynnin avulla. Ellei tasetta saada korjattua sähkön jälkimarkkinoilla tase-ero korjataan tasesähköllä, jonka hinta muodostuu säätösähkömarkkinoilla. Tasesähkön hinta saattaa poiketa Elspot- markkinahinnasta voimakkaasti, jolloin tase-erosta joko hyödytään tai hävitään kustannusmielessä. Tämän työn tarkoituksena on selvittää sähkötasehallinnan parantamisen ja sähkön kysyntäjouston vaikutukset paperitehtaan energiakustannuksiin. Työssä tutkittiin tehtaan sähkö-tasehallinnan nykytilannetta ja selvitettiin tase-erojen kustannusvaikuttavuutta. Lisäksi työssä luotiin ajomalleja sähkön kysyntäjouston toteuttamiselle massatehtaan eri tuotantoprosesseille, sekä määritettiin rajahintoja seuraavan vuorokauden energiaennusteeseen. Onnistunut energiaennuste perustuu paperitehtaan käynnin tarkkoihin ja ajankohtaisiin lähtötietoihin. Sähkötaseen poikkeamiin voidaan puolestaan varautua paremmin, kun informaatio tehtaan prosessien alasajosta tulee voimalaitoksen tietoon mahdollisimman aikaisin. Sähkötaseen poikkeamien hallinta voidaan tehdä, joko Elbas- kaupan tai tasesähkön avulla. Ajankohdasta ja tasepoikkeaman volyymista riippuen täytyy tehdä valinta, kumpi vaihtoehdoista on kustannusmielessä kannattavampi. Paperitehtaan eri prosesseille luoduilla ajomalleilla saatiin esiin huomattava säästöpotentiaali. Ajomallien noudattaminen vaatii suunnitelmallista tuotannon hallintaa ja sähkön Elspot- hinnan käyttäytymisen säännöllistä seurantaa. Seuraavan vuorokauden rajahintatietojen määrittämisen pohjalta voidaan arvioida, millä Elspot- hinnalla sähkön myynti muuttuu paperin tuotantoa kannattavammaksi.

Applications of augmented reality for sales in apparel industry in Russia

The sustainable growth of video interactivity technologies on different platforms in the lasts years opens good prospects for augmented reality technology adoption on different markets. In the end of 2011 there was an improvement in technology which allows building the 3D model of human body. Such an improvement could be used in apparel industry. The main goal of the study is to understand the level of acceptance of augmented reality as a technology on the Russian apparel market. For a more accurate investigation, a new model accounting for augmented reality characteristics, as well as for similarities and differences between online and offline customer behavior in apparel industry, was developed. As a result of the survey, the weights of different purchase intention factors for Russian consumer were found, and the information about Russian consumers’ preferences towards the augmented reality features in apparel market, especially in fitting time, real-time interaction and fitting quality peculiarities, was presented.

Determinants of credit risk in secured loans – Evidence from the auto loan industry

The purpose of this study is to examine attributes which have explanation power to the probability of default or serious overdue in secured auto loans. Another goal is to find out differences between defaulted loans and loans which have had payment difficulties but survived without defaulting. 19 independent variables used in this study reflect information available at the time of credit decision. These variables were tested with logistic regression and backward elimination procedure. The data includes 8931 auto loans from a Finnish finance company. 1118 of the contracts were taken by company customers and 7813 by private customers. 130 of the loans defaulted and 584 had serious payment problems but did not default. The maturities of those loans were from one month to 60 months and they have ended during year 2011. The LTV (loan-to-value) variable was ranked as the most significant explainer because of its strong positive relationship with probability of payment difficulties. Another important explainer in this study was the credit rating variable which got a negative relationship with payment problems. Also maturity and car age performed well having both a positive relationship with the probability of payment problems. When compared default and serious overdue situations, the most significant differences were found in the roles of LTV, Maturity and Gender variables.