Estratégia de desenvolvimento sustentável do turismo na Ria de Aveiro

O turismo costeiro é a atividade turística mais relevante em Portugal. Este facto deve-se essencialmente à extensa e diversificada linha de costa e à crescente procura destas áreas pelas suas características paisagísticas, que levou a um forte desenvolvimento da atividade turísticas ao longo das últimas décadas. No entanto, o turismo que se tem vindo a praticar nas áreas costeiras portuguesas não responde às questões da sustentabilidade que cada vez mais estão na base da competitividade dos destinos turísticos. A garantia de sustentabilidade e a atração pelo novo e pelo diferente são fatores essenciais à capacidade de atração e competitividade de um determinado território. O sector turístico não foge à regra. Como tal é necessário inverter o modelo massificado que caracteriza o turismo costeiro e inovar nos métodos e nos modelos de desenvolvimento deste turismo A região da Ria de Aveiro, composta por 11 municípios, é uma região com fortes potencialidades turísticas, mas que se encontram subaproveitadas ou incorretamente geridas. Esta região apresenta um forte potencial para a prática de um turismo sustentável, valorizando os recursos naturais e culturais que possui. É uma região que tem como ponto de conexão a “Ria de Aveiro”, sendo uma das principais zonas húmidas do território português. Além da Ria, possui variadíssimos recursos turísticos tais como praias marítimas e fluviais, frentes ribeirinhas, marinhas de sal, florestas, áreas de interesse conservacionista, aldeias serranas, património arquitetónico, nomeadamente religioso, casas de interesse (arte nova, palheiros), museus, azulejaria, estações arqueológicas, entre outros. A proximidade entre o mar e a serra cria condições para a diversificação da paisagem, surgindo áreas tipicamente serranas que contrastam com a planície costeira e lagunar. Esta variedade de recursos constitui uma excelente oportunidade para os municípios que compõem a região, porque podem ajudar a definir e a sustentar estratégias de desenvolvimento turístico mais competitivas e associadas ao quadro de recursos naturais disponíveis. É necessário, assim, uma aposta nas singularidades e especificidades da região, oferecendo o que outros destinos não conseguem oferecer, através da exploração sustentável dos recursos endógenos. No entanto, é fundamental existir vontade política para que se possam promover e aplicar estratégias de turismo sustentável neste território. Pretende-se com este trabalho apresentar um modelo estratégico para o sector do turismo da região da Ria de Aveiro, através de uma abordagem diferenciadora, que promova e potencie, de forma integrada o quadro de recursos existentes. Esta abordagem baseia-se em quatro premissas que pretendem estruturar e orientar o modelo estratégico apresentado, sendo elas a identidade da região, a sustentabilidade e competitividade, a construção de redes e a coesão sociocultural.

Integration of geochemical and biological modifications in mining areas: waters, sediments and diatoms

The development of mining activities over thousands of years in the region of Aljustrel is nowadays visible as a vast area of ore tailings, slag and host rocks of sulphides mineralization. The generation of acidic waters by the alteration of pyritic minerals - Acid Mine Drainage (AMD) - causes a significant impact on the river system both in the south of the village (Rib ª. Água Forte) and in the north of it (Rib ª. Água Azeda and Barranco do Farrobo), which is reflected in extremely low pH values (< 3) and high concentrations of As, Cd, Cu, Fe, Mn, Pb, Zn and sulphates. This study aimed to assess the environmental impacts extent, integrating geochemical (surface waters and stream sediments) and biological (diatoms) parameters. Three groups of sites were defined, based on sediments and water analysis, which integration with diatom data showed the same association of groups: Group 1- impacted, with acidic pH (1.9-5.1), high metal contents (0.4-1975 mg L-1) and Fe-Mg-sulphate waters, being metals more bioavailable in waters in cationic form (Me2+); mineralogically the sediments were characterized by phyllosilicates and sulphates/oxy-hydroxysulphate phases, easily solubilized, retaining a high amount of metals when precipitated; dominant taxon was Pinnularia aljustrelica (a new species); Group 2- slightly impacted, weak acid to neutral pH (5.0-6.8), metal contents not so high (0.2-25 mg L-1) and Fe-Mg-sulphate to Mg-chloride waters; dominant taxa were Brachysira neglectissima and Achnanthidium minutissimum; Group 3- unimpacted, alkaline pH (7.0-8.4), low metal contents (0-7 mg L-1) with Mg-chloride waters. In this group, metals were associated to the primary phases (e.g. sulphides), not so easily available; the existence of high chloride contents explained the presence of typical taxa of brackish/marine (e.g. Entomoneis paludosa) waters. Taxonomical aspects of the diatoms were studied (discovery of a new species: Pinnularia aljustrelica Luis, Almeida et Ector sp. nov.), as well as morphometric (size decrease of diatoms valves, as well as the appearance of deformed valves of Eunotia exigua in Group 1 and A. minutissimum in Group 2) and physiological (effective to assess the effects of metals/acidity in the photosynthetic efficiency through PAM Fluorometry) aspects. A study was carried out in an artificial river system (microcosm) that aimed to mimic Aljustrel’s extreme conditions in controlled laboratory conditions. The chronic effects of Fe, SO42- and acidity in field biofilms, inoculated in the artificial rivers, were evaluated as well as their contribution to the communities’ tolerance to metal toxicity, through acute tests with two metals (Cu and Zn). In general, the effects caused by low pH values and high concentrations of Fe and SO42- were reflected at the community level by the decrease in diversity, the predominance of acidophilic species, the decrease in photosynthetic efficiency and the increase of enzymatic (e.g. catalase, superoxide dismutase) and non-enzymatic activities (e.g. total glutathione and total phytochelatins). However, it was possible to verify that acidity performed a protective effect in the communities, upon Cu and Zn addition. A comparative study between Aljustrel mining area and New Brunswick mining area was carried out, both with similar mining and geological conditions, reflected in similar diatom communities in both mines, but in very different geographic and climatic areas.

O papel do associativismo no tecido empresarial do distrito de Aveiro

O objetivo deste estudo, que resultou de um estágio realizado na Associação Industrial do Distrito de Aveiro (AIDA), foi perceber qual o papel das associações empresariais e industriais para o tecido empresarial desta mesma região. Neste sentido, procurou-se perceber: quais os serviços procurados pelas empresas nas suas associações, as razões que motivam essa procura e o grau de satisfação com os serviços prestados; quais as vantagens e desvantagens de pertencer a uma associação empresarial/industrial; e quais as mudanças percecionadas como necessárias nas associações para a melhoria da qualidade dos serviços prestados, tornando-as, deste modo, mais relevantes para o tecido empresarial. Com vista à concretização do objetivo proposto foi utilizada uma metodologia qualitativa, tendo a informação sido recolhida através de análise documental, de observação participante e de entrevistas realizadas à Diretora-Geral da AIDA e a oito empresas pertencentes a associações empresariais e industriais. O presente estudo começa por apresentar a evolução da indústria portuguesa e do associativismo industrial ao longo do tempo, focando as alterações mais significativas ocorridas e referindo as funções desempenhadas pelas mesmas associações. Posteriormente, é analisado a Entidade de Acolhimento – a AIDA –, e relatadas as atividades realizadas ao longo do estágio nessa instituição. Seguidamente, e após a explicação da metodologia utilizada, é apresentada a análise das entrevistas realizadas a empresários. Finalmente, são tiradas as conclusões finais e delineadas perspetivas para o futuro. Este estudo permitiu reconhecer o papel importante que as associações empresarias/indústrias desempenham para as empresas e para as regiões onde estas se inserem. Porém, existem ainda mudanças a realizar, de forma a potenciar o seu trabalho e ir de encontro aos anseios e às necessidades das empresas.

On the application of optimal control techniques in lossy fieldbuses

The performance of real-time networks is under continuous improvement as a result of several trends in the digital world. However, these tendencies not only cause improvements, but also exacerbates a series of unideal aspects of real-time networks such as communication latency, jitter of the latency and packet drop rate. This Thesis focuses on the communication errors that appear on such realtime networks, from the point-of-view of automatic control. Specifically, it investigates the effects of packet drops in automatic control over fieldbuses, as well as the architectures and optimal techniques for their compensation. Firstly, a new approach to address the problems that rise in virtue of such packet drops, is proposed. This novel approach is based on the simultaneous transmission of several values in a single message. Such messages can be from sensor to controller, in which case they are comprised of several past sensor readings, or from controller to actuator in which case they are comprised of estimates of several future control values. A series of tests reveal the advantages of this approach. The above-explained approach is then expanded as to accommodate the techniques of contemporary optimal control. However, unlike the aforementioned approach, that deliberately does not send certain messages in order to make a more efficient use of network resources; in the second case, the techniques are used to reduce the effects of packet losses. After these two approaches that are based on data aggregation, it is also studied the optimal control in packet dropping fieldbuses, using generalized actuator output functions. This study ends with the development of a new optimal controller, as well as the function, among the generalized functions that dictate the actuator’s behaviour in the absence of a new control message, that leads to the optimal performance. The Thesis also presents a different line of research, related with the output oscillations that take place as a consequence of the use of classic co-design techniques of networked control. The proposed algorithm has the goal of allowing the execution of such classical co-design algorithms without causing an output oscillation that increases the value of the cost function. Such increases may, under certain circumstances, negate the advantages of the application of the classical co-design techniques. A yet another line of research, investigated algorithms, more efficient than contemporary ones, to generate task execution sequences that guarantee that at least a given number of activated jobs will be executed out of every set composed by a predetermined number of contiguous activations. This algorithm may, in the future, be applied to the generation of message transmission patterns in the above-mentioned techniques for the efficient use of network resources. The proposed task generation algorithm is better than its predecessors in the sense that it is capable of scheduling systems that cannot be scheduled by its predecessor algorithms. The Thesis also presents a mechanism that allows to perform multi-path routing in wireless sensor networks, while ensuring that no value will be counted in duplicate. Thereby, this technique improves the performance of wireless sensor networks, rendering them more suitable for control applications. As mentioned before, this Thesis is centered around techniques for the improvement of performance of distributed control systems in which several elements are connected through a fieldbus that may be subject to packet drops. The first three approaches are directly related to this topic, with the first two approaching the problem from an architectural standpoint, whereas the third one does so from more theoretical grounds. The fourth approach ensures that the approaches to this and similar problems that can be found in the literature that try to achieve goals similar to objectives of this Thesis, can do so without causing other problems that may invalidate the solutions in question. Then, the thesis presents an approach to the problem dealt with in it, which is centered in the efficient generation of the transmission patterns that are used in the aforementioned approaches.

Mercaptans extraction from jet-fuel streams using ionic liquids

Desulfurization is one of the most important processes in the refining industry. Due to a growing concern about the risks to human health and environment, associated with the emissions of sulfur compounds, legislation has become more stringent, requiring a drastic reduction in the sulfur content of fuel to levels close to zero (< 10 ppm S). However, conventional desulfurization processes are inefficient and have high operating costs. This scenario stimulates the improvement of existing processes and the development of new and more efficient technologies. Aiming at overcoming these shortcomings, this work investigates an alternative desulfurization process using ionic liquids for the removal of mercaptans from "jet fuel" streams. The screening and selection of the most suitable ionic liquid were performed based on experimental and COSMO-RS predicted liquid-liquid equilibrium data. A model feed of 1-hexanethiol and n-dodecane was selected to represent a jet-fuel stream. High selectivities were determined, as a result of the low mutual solubility between the ionic liquid and the hydrocarbon matrix, proving the potential use of the ionic liquid, which prevents the loss of fuel for the solvent. The distribution ratios of mercaptans towards the ionic liquids were not as favorable, making the traditional liquid-liquid extraction processes not suitable for the removal of aliphatic S-compounds due to the high volume of extractant required. This work explores alternative methods and proposes the use of ionic liquids in a separation process assisted by membranes. In the process proposed the ionic liquid is used as extracting solvent of the sulfur species, in a hollow fiber membrane contactor, without co-extracting the other jet-fuel compound. In a second contactor, the ionic liquid is regenerated applying a sweep gas stripping, which allows for its reuse in a closed loop between the two membrane contactors. This integrated extraction/regeneration process of desulfurization produced a jet-fuel model with sulfur content lower than 2 ppm of S, as envisaged by legislation for the use of ultra-low sulfur jet-fuel. This result confirms the high potential for development of ultra-deep desulfurization application.

Valorization of solid wastes from cellulose and paper industry

This thesis reports in detail studies of industrial solid wastes valorization as alternative raw materials. All tested wastes are classified as non-hazardous and are generated in the pulp and paper process, including primary sludge, dregs, grits, lime mud and bottom ash (this generated in a process that occurs in parallel to the production of cellulose, whose aim is the production of energy to supply the plant through the combustion of forest biomass in fluidized bed). A detailed general characterization was performed at each waste and according to their characteristics, they were selected some applications in materials with potential use, specifically in Fibercement, Bituminous Mixture for regularization layer and industrial mortars (rendering mortars and cementitious-adhesive). After decided to application each waste was specifically tested to proceed the setting up of formulations containing different content of waste in replacement of the raw conventional material. As an isolated case, the bottom ash was tested not only as an alternative raw material for construction materials, but also it was tested for its use in fluidized bed in which the waste is generated as raw material. Both dregs and bottom ash had undergone special treatment to make possible to obtain a better quality of waste in order do not compromise the final product characteristics and process. The dregs were tested in bituminous mixtures as received and also washed (on the laboratory scale to remove soluble salts) and bottom ash were washed and screened in industrial scale (for removal of soluble salts, especially chlorides and coarse fraction particles elimination - particles larger than 1 mm size). The remaining residues form used in such as received avoiding additional costs. The results indicated potential and some limitations for each application to the use of these wastes as alternative raw material, but in some cases, the benefits in relation to valorization overlap with its limitations in both aspects, environmental and economic.

Materials and concepts for CO2 lean ironmaking by pyroelectrolysis

The main purpose of this PhD thesis was to provide convincing demonstration for a breakthrough concept of pyroelectrolysis at laboratory scale. One attempted to identify fundamental objections and/or the most critical constraints, to propose workable concepts for the overall process and for feasible electrodes, and to establish the main requirements on a clearer basis. The main effort was dedicated to studying suitable anode materials to be developed for large scale industrial units with molten silicate electrolyte. This concept relies on consumable anodes based on iron oxides, and a liquid Fe cathode, separated from the refractory materials by a freeze lining (solid) layer. In addition, one assessed an alternative concept of pyroelectrolysis with electron blocking membranes, and developed a prototype at small laboratory scale. The main composition of the molten electrolyte was based on a magnesium aluminosilicate composition, with minimum liquidus temperature, and with different additions of iron oxide. One studied the dynamics of devitrification of these melts, crystallization of iron oxides or other phases, and Fe2+/Fe3+ redox changes under laser zone melting, at different pulling rates. These studies were intended to provide guidelines for dissolution of raw materials (iron oxides) in the molten electrolyte, to assess compatibility with magnetite based consumable anodes, and to account for thermal gradients or insufficient thermal management in large scale cells. Several laboratory scale prototype cells were used to demonstrate the concept of pyroelectrolysis with electron blocking, and to identify the most critical issues and challenges. Operation with and without electron blocking provided useful information on transport properties of the molten electrolyte (i.e., ionic and electronic conductivities), their expected dependence on anodic and cathodic overpotentials, limitations in faradaic efficiency, and onset of side electrochemical reactions. The concept of consumable anodes was based on magnetite and derived spinel compositions, for their expected redox stability at high temperatures, even under oxidising conditions. Spinel compositions were designed for prospective gains in refractoriness and redox stability in wider ranges of conditions (T, pO2 and anodic overpotentials), without excessive penalty for electrical conductivity, thermomechanical stability or other requirements. Composition changes were also mainly based on components of the molten aluminosilicate melt, to avoid undue contamination and to minimize the dissolution rate of consumable anodes. Additional changes in composition were intended for prospective pyroelectrolysis of Fe alloys, with additions of different elements (Cr, Mn, Ni, Ti).

Asymmetric rolling of 5182 aluminium alloy and interstitial free steel sheets

This Ph.D. research focuses on asymmetric rolling (ASR), as an alternative method for improving mechanical responses of aluminium-magnesium alloy and interstitial free (IF) steel regarding industrial requirements. Aluminium alloys are attractive materials in various industries due to their appropriate properties such as low density and corrosion resistance; however, their low formability has limited their applications. As formability of aluminium alloys can be improved through texture development, part of this dissertation is dedicated to producing the desired crystallographic texture with the ASR process. Two types of ASR (i.e. reverse and continuous asymmetric rolling) were investigated. The impact of shear deformation imposed by ASR processes on developing the desirable texture and consequently on mechanical behaviours was observed. The developed shear texture increased the normal and also planar anisotropy. Texture evolution during plastic deformation as well as induced mechanical behaviour were simulated using the “self-consistent” and Taylor models. Interstitial free (IF) steel was the second material selected in this dissertation. Since IF steel is one of the most often used materials in automotive industries it was chosen to investigate the effect of shear deformation through ASR on its properties. Two types of reverse and continuous asymmetric rolling were carried out to deform IF steel sheets. The results of optical microscopy and atomic force microscopy observations showed no significant difference between the grains’ morphology of asymmetric and conventionally rolled samples, whereas the obtained results of transmission electron microscopy indicated that fine and equiaxed dislocation cells were formed through the asymmetric rolling process. This structure is due to imposed shear deformation during the ASR process. Furthermore, the mechanical behaviour of deformed and annealed sheets was evaluated through uniaxial tensile tests. Results showed that at low thickness reductions (18%) the asymmetric rolled sample presented higher stress than that of the conventionally rolled sheet; while for higher thickness reductions (60%) the trend was reversed. The texture analyses indicated that intense rolling texture components which developed through 60% thickness reduction of conventional rolling cause a relatively higher stress; on the contrary the fine structure resulting from ASR appears to be the source of higher stress observed after pre-deformation of 18%.

Metais em plantas e algas : acumulação e potencial aplicação em processos de remediação

The present work reports the study of the bioaccumulation of potentially toxic elements (cadmium, lead and mercury) by marine macroalgae (Ulva lactuca, Fucus vesiculosus and Gracilaria gracilis), abundant in the coast and estuarine systems worldwide. These organisms proved to be capable of withstanding moderate multi-metallic contamination (environmentally relevant concentrations), incorporating high amounts of metal in their tissues. The high removal percentages achieved, in particular for mercury (99%), demonstrate the potential of these algae as a basis for a new biotechnological treatment of saline waters contaminated with metals (more efficient, cost-effective and environmentally friendly than conventional methods). U. lactuca was considered the most promising due to the better performance presented. The comparison between the bioaccumulation and biosorption processes suggested that in some cases the use of the living organism will have advantages over the application of biomass, due to the simplicity of the overall process, and the lower residual concentration of metal achieved in the solution (especially for Cd). The transfer and accumulation of Hg by terrestrial plants (Brassica juncea and Lolium perenne) in agricultural fields near a contaminated industrial area was also studied. Despite the low bioaccumulation factors found (<1), there were high Hg content in plants (up to 84 mg kg-1 in roots and up 6.9 mg kg-1 in shoots, dry weight). Daily intake estimates for grazing animals (cows and sheep) pointed to the potential risk to human health derived from consumption of their meat. The results highlighted the important role that plants and algae may have in protection, risk assessment and remediation of environmental systems contaminated with metals.

Sustainable viticulture in Bairrada appellation: vineyard and harvest year effects on grapes oenological potential

The sustainable viticulture of a region passes, among other aspects, for maximizing the varieties potential minimizing subsequent interventions during winemaking, which should contribute to the production of quality wines maintaining their typicity and rationalizing costs. The detailed knowledge of each Appellation specificities, namely vineyard parcel (soil type and topographical peculiarities) and harvest climatic conditions is crucial for sustainability in this sector. Thus, in line with this current trend, the starting point for the development of this PhD thesis was to evaluate the oenological potential of different varieties cultivated throughout Bairrada Appellation (Portugal). During maturation several changes in grape varieties occur, namely berries become sweeter, less acidic, and they develop flavour, aroma and colour properties. The development of these characteristics is essential to define grapes oenological potential, i.e. to estimate the possibility of their usage to produce specific wines. A three years sampling plan was designed to evaluate the effect of harvest year and parcel characteristics on V. vinifera cv. Arinto, Bical, Sauvignon Blanc, Baga, Castelão, Touriga Nacional, and Sousão grapes composition. For each variety, 3 parcels with different characteristics were selected. Several physicochemical parameters were evaluated, during maturation: berry weight, pH, titratable acidity, sugar and phenolic contents, antiradical activity, and volatile composition (free fraction). Special attention was devoted to grapes at technologic maturity, since, besides these parameters, glycosidically-linked fraction was also considered. By using the results obtained at technologic maturity, a comprehensive approach was applied to identify the significance of harvest and parcel characteristics effects on each variety composition. Considering all the parameters under study, it may be highlighted some significant differences. According to the obtained results determined during maturation, it was possible to conclude that Arinto, Bical and Sauvignon Blanc grapes from parcels with clay-sandy and clay-calcareous soils have higher phenolic content and antiradical activity. Otherwise, Sauvignon Blanc presented similar volatile composition for grapes cultivated in the 3 parcels, while Arinto and Bical exhibited higher volatile content in grapes from claysandy and clay-calcareous soils. For Baga, Castelão and Touriga Nacional red varieties, grapes with higher phenolic content, antiradical activity, and volatile content were obtained from clayey and clay-calcareous soils. Furthermore, for Touriga Nacional, parcels altitude seems also to modulate grapes composition. Beyond parcel effect, harvest year conditions also influence grapes composition: 2011 harvest was related with lower phenolic and volatile contents, as well as lower antiradical activity.For grapes collected at technologic maturity, analysis of variance-simultaneous component analysis (ASCA) was applied combining all the parameters under study, in order to assess the influence of harvest and parcel characteristics on each variety oenological potential. The results obtained using this comprehensive approach is closely related with those observed during maturation and revealed that harvest was the main factor that influenced grapes composition (53% to 68% of the total data set variance) followed by parcel characteristics, explaining ca. 15-19% of the total data set variance. The oenological potential of each variety may be different from one parcel to another, i.e., clay-sandy and clay-calcareous related-environments seem to favour Arinto and Bical white grapes composition, but for the red varieties, grapes composition was favoured by clayey and clay-calcareous soils. Besides, also higher altitude seems to favour Touriga Nacional grapes composition. Sauvignon Blanc seems to be a variety well adapted to the different parcel characteristics. In order to go forward in the valuation of these varieties, the aroma properties of 6 monovarietal wines were studied based on an aroma network-approach, linking molecular data related to volatile composition and aroma data about the key odor active molecules. This approach allowed to identify different wine aroma properties and to infer about the consumer’s sensory perception. It was found that aroma properties differ from one wine variety to another: while Arinto and Sauvignon Blanc wine exhibited higher tree fruity, sweety and flowery aromas, related essentially with ester compounds and C13 norisoprenoids, the opposite was obtained for Bical wine, corroborating the aroma sensory perceptions of the trained panel. Sauvignon Blanc also exhibited higher toasted aromas (related with thiols, mainly with 2-methyl-3-furanthiol). Touriga Nacional red wine exhibited higher tree, tropical, and berry fruits notes (sensory described as sweet fruits), toasted and flowery aromas, while these are similar for the other red wines under study. Besides Portuguese Bairrada wines, this aroma network approach is a tool that can be used to explain the aroma properties of wines worldwide. The grape and wine data generated under the present PhD thesis, in the context of Bairrada Appellation, shows the unique character of each variety, and may be used by growers and wine producers as a support for decisionmaking based on objective criteria, increasing the sustainability in this sector. For instance, it is possible to take advantage of the natural resources and produce products with different characteristics obtained from the same variety, minimizing costs during the winemaking process.

Treatment of aqueous effluents contaminated with ionic liquids

Ionic liquids are a class of solvents that, due to their unique properties, have been proposed in the past few years as alternatives to some hazardous volatile organic compounds. They are already used by industry, where it was possible to improve different processes by the incorporation of this kind of non-volatile and often liquid solvents. However, even if ionic liquids cannot contribute to air pollution, due to their negligible vapour pressures, they can be dispersed thorough aquatic streams thus contaminating the environment. Therefore, the main goals of this work are to study the mutual solubilities between water and different ionic liquids in order to infer on their environmental impact, and to propose effective methods to remove and, whenever possible, recover ionic liquids from aqueous media. The liquid-liquid phase behaviour of different ionic liquids and water was evaluated in the temperature range between (288.15 and 318.15) K. For higher melting temperature ionic liquids a narrower temperature range was studied. The gathered data allowed a deep understanding on the structural effects of the ionic liquid, namely the cation core, isomerism, symmetry, cation alkyl chain length and the anion nature through their mutual solubilities (saturation values) with water. The experimental data were also supported by the COnductor-like Screening MOdel for Real Solvents (COSMO-RS), and for some more specific systems, molecular dynamics simulations were also employed for a better comprehension of these systems at a molecular level. On the other hand, in order to remove and recover ionic liquids from aqueous solutions, two different methods were studied: one based on aqueous biphasic systems, that allowed an almost complete recovery of hydrophilic ionic liquids (those completely miscible with water at temperatures close to room temperature) by the addition of strong salting-out agents (Al2(SO4)3 or AlK(SO4)2); and the other based on the adsorption of several ionic liquids onto commercial activated carbon. The first approach, in addition to allowing the removal of ionic liquids from aqueous solutions, also makes possible to recover the ionic liquid and to recycle the remaining solution. In the adsorption process, only the removal of the ionic liquid from aqueous solutions was attempted. Nevertheless, a broad understanding of the structural effects of the ionic liquid on the adsorption process was attained, and a final improvement on the adsorption of hydrophilic ionic liquids by the addition of an inorganic salt (Na2SO4) was also achieved. Yet, the development of a recovery process that allows the reuse of the ionic liquid is still required for the development of sustainable processes.

Degradação do perfil bioquímico de um concentrado de Nannochloropsis sp. durante o seu período de validade

As algas do género Nannochloropsis são microalgas marinhas que apresentam um perfil bioquímico único, principalmente no que é respeitante a lípidos, e uma vasta gama de compostos bioativos que possibilitam a sua aplicabilidade comercial em várias áreas biotecnológicas, destacando-se a alimentação e nutrição humana, indústria cosmética e farmacêutica, produção de biocombustíveis e a sua utilização em aquacultura. Em aquacultura, são usadas maioritariamente microalgas vivas, cuja produção representa elevados custos. Tem havido assim uma pesquisa de dietas alternativas, entre as quais os concentrados de microalgas se apresentam promissores. Os desafios atuais das empresas produtoras de concentrados de microalgas prendem-se com a conservação e armazenamento destes concentrados. Assim, neste trabalho foi proposto o estudo da influência da refrigeração, congelação e adição de conservantes a PhytoBloom Green Formula®, concentrado de Nannochloropsis sp. comercializado pela empresa Necton S.A., com o objetivo de averiguar a variação de parâmetros bioquímicos e organoléticos com a exposição do concentrado aos diferentes métodos de conservação. Pretendia-se assim observar se estes processos podem ser usados para aumentar o tempo de prateleira do concentrado em estudo. Para tal, foram avaliadas amostras recolhidas em três pontos temporais e analisados os seguintes parâmetros: perfil de ácidos gordos, quantificação de hidroperóxidos lipídicos, quantificação espectrofotométrica de clorofila a e carotenóides, bem como parâmetros organoléticos. Inicialmente, foi efetuada uma avaliação de diferentes parâmetros organoléticos, não se observando variações relevantes entre amostras das diferentes condições. Assim, foi posteriormente realizada a avaliação bioquímica. Primeiramente, foi efetuada a quantificação de ácidos gordos por GC-FID das diferentes amostras, nas quais não se observou diferenças significativas entre as condições experimentais. Foi também efetuado um ensaio de FOX II, que permitiu avaliar o grau de peroxidação lipídica de cada amostra por quantificação de hidroperóxidos lipídicos formados. As amostras nas quais houve adição de conservantes apresentaram um teor menor de hidropéroxidos lipídicos, permitindo inferir que a ação dos conservantes com propriedades antioxidantes permitiu uma melhor conservação da amostra. Quando se determinou a concentração de clorofila a e de carotenóides verificou-se que, em ambos os casos, a congelação conduziu a uma estabilização da concentração destes pigmentos. No entanto, os melhores resultados foram obtidos usando a combinação de congelação com adição de conservantes. Estes resultados, embora promissores, carecem de uma confirmação por um novo estudo, completando com análises com maior rigor e sensibilidade associados, no sentido de se verificar qual o método mais vantajoso para a extensão do tempo de prateleira de PhytoBloom Green Formula®.

Degradação do perfil bioquímico de um concentrado de Nannochloropsis sp. durante o seu período de validade

As algas do género Nannochloropsis são microalgas marinhas que apresentam um perfil bioquímico único, principalmente no que é respeitante a lípidos, e uma vasta gama de compostos bioativos que possibilitam a sua aplicabilidade comercial em várias áreas biotecnológicas, destacando-se a alimentação e nutrição humana, indústria cosmética e farmacêutica, produção de biocombustíveis e a sua utilização em aquacultura. Em aquacultura, são usadas maioritariamente microalgas vivas, cuja produção representa elevados custos. Tem havido assim uma pesquisa de dietas alternativas, entre as quais os concentrados de microalgas se apresentam promissores. Os desafios atuais das empresas produtoras de concentrados de microalgas prendem-se com a conservação e armazenamento destes concentrados. Assim, neste trabalho foi proposto o estudo da influência da refrigeração, congelação e adição de conservantes a PhytoBloom Green Formula®, concentrado de Nannochloropsis sp. comercializado pela empresa Necton S.A., com o objetivo de averiguar a variação de parâmetros bioquímicos e organoléticos com a exposição do concentrado aos diferentes métodos de conservação. Pretendia-se assim observar se estes processos podem ser usados para aumentar o tempo de prateleira do concentrado em estudo. Para tal, foram avaliadas amostras recolhidas em três pontos temporais e analisados os seguintes parâmetros: perfil de ácidos gordos, quantificação de hidroperóxidos lipídicos, quantificação espectrofotométrica de clorofila a e carotenóides, bem como parâmetros organoléticos. Inicialmente, foi efetuada uma avaliação de diferentes parâmetros organoléticos, não se observando variações relevantes entre amostras das diferentes condições. Assim, foi posteriormente realizada a avaliação bioquímica. Primeiramente, foi efetuada a quantificação de ácidos gordos por GC-FID das diferentes amostras, nas quais não se observou diferenças significativas entre as condições experimentais. Foi também efetuado um ensaio de FOX II, que permitiu avaliar o grau de peroxidação lipídica de cada amostra por quantificação de hidroperóxidos lipídicos formados. As amostras nas quais houve adição de conservantes apresentaram um teor menor de hidropéroxidos lipídicos, permitindo inferir que a ação dos conservantes com propriedades antioxidantes permitiu uma melhor conservação da amostra. Quando se determinou a concentração de clorofila a e de carotenóides verificou-se que, em ambos os casos, a congelação conduziu a uma estabilização da concentração destes pigmentos. No entanto, os melhores resultados foram obtidos usando a combinação de congelação com adição de conservantes. Estes resultados, embora promissores, carecem de uma confirmação por um novo estudo, completando com análises com maior rigor e sensibilidade associados, no sentido de se verificar qual o método mais vantajoso para a extensão do tempo de prateleira de PhytoBloom Green Formula®.

Assessing the effectiveness of chemical treatment with nanomaterials in improving the quality of different industrial effluents

Industrial activities are the major sources of pollution in all environments. Depending on the type of industry, various levels of organic and inorganic pollutants are being continuously discharged into the environment. Although, several kinds of physical, chemical, biological or the combination of methods have been proposed and applied to minimize the impact of industrial effluents, few have proved to be totally effective in terms of removal rates of several contaminants, toxicity reduction or amelioration of physical and chemical properties. Hence, it is imperative to develop new and innovative methodologies for industrial wastewater treatment. In this context nanotechnology arises announcing the offer of new possibilities for the treatment of wastewaters mainly based on the enhanced physical and chemical proprieties of nanomaterials (NMs), which can remarkably increase their adsorption and oxidation potential. Although applications of NMs may bring benefits, their widespread use will also contribute for their introduction into the environment and concerns have been raised about the intentional use of these materials. Further, the same properties that make NMs so appealing can also be responsible for producing ecotoxicological effects. In a first stage, with the objective of selecting NMs for the treatment of organic and inorganic effluents we first assessed the potential toxicity of nanoparticles of nickel oxide (NiO) with two different sizes (100 and 10-20 nm), titanium dioxide (TiO2, < 25 nm) and iron oxide (Fe2O3, ≈ 85x425 nm). The ecotoxicological assessment was performed with a battery of assays using aquatic organisms from different trophic levels. Since TiO2 and Fe2O3 were the NMs that presented lower risks to the aquatic systems, they were selected for the second stage of this work. Thus, the two NMs pre-selected were tested for the treatment of olive mill wastewater (OMW). They were used as catalyst in photodegradation systems (TiO2/UV, Fe2O3/UV, TiO2/H2O2/UV and Fe2O3/H2O2/UV). The treatments with TiO2 or Fe2O3 combined with H2O2 were the most efficient in ameliorating some chemical properties of the effluent. Regarding the toxicity to V. fischeri the highest reduction was recorded for the H2O2/UV system, without NMs. Afterwards a sequential treatment using photocatalytic oxidation with NMs and degradation with white-rot fungi was applied to OMW. This new approach increased the reduction of chemical oxygen demand, phenolic content and ecotoxicity to V. fischeri. However, no reduction in color and aromatic compounds was achieved after 21 days of biological treatment. The photodegradation systems were also applied to treat the kraft pulp mill and mining effluents. For the organic effluent the combination NMs and H2O2 had the best performances in reduction the chemical parameters as well in terms of toxicity reduction. However, for the mine effluent the best (TiO2/UV and Fe2O3/UV) were only able to significantly remove three metals (Zn, Al and Cd). Nonetheless the treatments were able of reducing the toxicity of the effluent. As a final stage, the toxicity of solid wastes formed during wastewater treatment with NMs was assessed with Chironomus riparius larvae, a representative species of the sediment compartment. Certain solid wastes showed the potential to negatively affect C. riparius survival and growth, depending on the type of effluent treated. This work also brings new insights to the use of NMs for the treatment of industrial wastewaters. Although some potential applications have been announced, many evaluations have to be performed before the upscaling of the chemical treatments with NMs.

Ecological and biotechnological potential of sponge microbiome

Marine sponges harbor microbial communities of immense ecological and biotechnological importance. Recently, they have been focus of heightened attention due to the wide range of biologically active compounds with potential application, particularly, in chemical, cosmetic and pharmaceutical industries. However, we still lack fundamental knowledge of their microbial ecology and biotechnological potential. The development of high-throughput sequencing technologies has given rise to a new range of tools that can help us explore the biotechnological potential of sponges with incredible detail. Metagenomics, in particular, has the power to revolutionize the production of bioactive compounds produced by unculturable microorganisms. It can offer the identification of biosynthetic genes or gene clusters that can be heterologously expressed on a cultivable and suitable host. This review focus on the exploration of the biotechnological potential of sponge-associated microorganisms, and integration of molecular approaches, whose increasing efficiency can play an essential role on achieving a sustainable source of natural products.