Slow deterministic vector rogue waves

For an erbium-doped fiber laser mode-locked by carbon nanotubes, we demonstrate experimentally and theoretically a new type of the vector rogue waves emerging as a result of the chaotic evolution of the trajectories between two orthogonal states of polarization on the Poincare sphere. In terms of fluctuation induced phenomena, by tuning polarization controller for the pump wave and in-cavity polarization controller, we are able to control the Kramers time, i.e. the residence time of the trajectory in vicinity of each orthogonal state of polarization, and so can cause the rare events satisfying rogue wave criteria and having the form of transitions from the state with the long residence time to the state with a short residence time.

Bright and dark vector rogue waves

For an Erbium-doped mode locked fibre laser, we demonstrate experimentally a new type of vector rogue waves (RWs) emergence of which is caused by the coherent coupling of the orthogonal states of polarisation (SOPs). Unlike weak interaction between neighbouring dissipative solitons for the soliton rain, this creates a new type of the energy landscape where the interaction of the orthogonal SOPs leads to polarisation trapping or escapes from the trapping triggered by polarisation instabilities and so results in the pulse dynamics satisfying criteria of the 'dark' and 'bright' RWs. The obtained results, apart from the fundamental interest, can provide a base for development of the rogue waves mitigation techniques in the context of the applications in photonics and beyond.

Design of Latent Thermal Energy Storage Systems

This dissertation documents the results of a theoretical and numerical study of time dependent storage of energy by melting a phase change material. The heating is provided along invading lines, which change from single-line invasion to tree-shaped invasion. Chapter 2 identifies the special design feature of distributing energy storage in time-dependent fashion on a territory, when the energy flows by fluid flow from a concentrated source to points (users) distributed equidistantly on the area. The challenge in this chapter is to determine the architecture of distributed energy storage. The chief conclusion is that the finite amount of storage material should be distributed proportionally with the distribution of the flow rate of heating agent arriving on the area. The total time needed by the source stream to ‘invade’ the area is cumulative (the sum of the storage times required at each storage site), and depends on the energy distribution paths and the sequence in which the users are served by the source stream. Chapter 3 shows theoretically that the melting process consists of two phases: “invasion” thermal diffusion along the invading line, which is followed by “consolidation” as heat diffuses perpendicularly to the invading line. This chapter also reports the duration of both phases and the evolution of the melt layer around the invading line during the two-dimensional and three-dimensional invasion. It also shows that the amount of melted material increases in time according to a curve shaped as an S. These theoretical predictions are validated by means of numerical simulations in chapter 4. This chapter also shows that the heat transfer rate density increases (i.e., the S curve becomes steeper) as the complexity and number of degrees of freedom of the structure are increased, in accord with the constructal law. The optimal geometric features of the tree structure are detailed in this chapter. Chapter 5 documents a numerical study of time-dependent melting where the heat transfer is convection dominated, unlike in chapter 3 and 4 where the melting is ruled by pure conduction. In accord with constructal design, the search is for effective heat-flow architectures. The volume-constrained improvement of the designs for heat flow begins with assuming the simplest structure, where a single line serves as heat source. Next, the heat source is endowed with freedom to change its shape as it grows. The objective of the numerical simulations is to discover the geometric features that lead to the fastest melting process. The results show that the heat transfer rate density increases as the complexity and number of degrees of freedom of the structure are increased. Furthermore, the angles between heat invasion lines have a minor effect on the global performance compared to other degrees of freedom: number of branching levels, stem length, and branch lengths. The effect of natural convection in the melt zone is documented.

L'image principale de profil, symbole de l'individu connecté

Depuis le début du XXIe siècle, un type particulier d’images a envahi l’espace public constitué par Internet : il s’agit des images principales de profil, ces images que les utilisateurs de sites de réseaux sociaux choisissent pour les représenter auprès des autres individus connectés. Comme le plus souvent il s’agit d’une image du corps de celui ou celle qui s’affiche ainsi, il est intéressant de s’intéresser à cette pratique en la rattachant à des pratiques plus anciennes. Dans un premier temps, cette étude présente donc une perspective socio-historique en notant la ressemblance de la pratique de l’image principale de profil avec celle de l’autoportrait et du portrait commandé. Cela permet de remarquer plusieurs points de rupture ou d’inflexion dans l’usage de ce type d’images, mais aussi d’en dégager les usages sociaux typiques. Ensuite, l’observation d’un lieu particulier d’Internet permet de tirer les conclusions suivantes : si l’usage principal de ces images est facile à expliquer, elles servent à symboliser une présence dans des lieux non accessibles aux corps sensibles, ces images montrent toujours des éléments qui permettent de déduire une position sociale et elles sont fondamentalement identiques aux images produites avant Internet. Ensuite, l’étude de ces images montre qu’il y a un véritable continuum dans la manière de dévoiler son intimité qui permet d’affirmer que la frontière entre public et privé n’existe pas sur Internet. Finalement, ces images montrent une absence de canon quant à leur production et une multiplicité des façons de se mettre en scène qui laissent à penser qu’elles sont devenues des symboles à part entière dans la communication qui peut s’établir entre des étrangers sur Internet.

Chemical composition of igneous rocks and origin of the sill and pillow-basalt complex at DSDP Site 61-462

The sill and pillow complex cored on Deep Sea Drilling Project Leg 61 (Site 462) is divided into two groups, A and B types, on the basis of chemical composition and volcanostratigraphy. The A-type basalt is characterized by a higher FeO*/MgO ratio and abundant TiO2, whereas the B-type basalt is characterized by a lower FeO*/MgO ratio and scarcity of TiO2. The A type is composed of sills interbedded with hyaloclastic sediments, and the B type consists of basalt sills and pillow basalt with minor amounts of sediment. However, the structure of pillow basalts in the B type is atypical; they might be eruptive. From paleontological study of the interbedded sediments and radiometric age determination of the basalt, the volcanic event of A type is assumed to be Cenomanian to Aptian, and that of B type somewhat older. The oceanic crust in the Nauru Basin was assumed to be Oxfordian, based on the Mesozoic magnetic anomaly. Consequently, two events of intraplate volcanism are recognized. It is thus assumed that the sill-pillow complex did not come from a normal oceanic ridge, and that normal oceanic basement could therefore underlie the complex. The Site 462 basalts are quartz-normative, and strongly hypersthene-normative, and have a higher FeO*/MgO ratio and lower TiO2 content. Olivine from the Nauru Basin basalts has a lower Mg/(Mg + Fe**2+) ratio (0.83-0.84) and coexists with spinel of lower Mg/(Mg + Fe**2+) ratio when compared to olivine-spinel pairs from mid-ocean ridge (MAR) basalt. The glass of spinel-bearing basalts has a higher FeO*/(FeO* + MgO) ratio (0.58-0.60) than that of MAR (<0.575). Therefore, the Nauru Basin basalts are chemically and mineralogically distinct from ocean-ridge tholeiite. That the Nauru Basin basalts are quartz-normative and strongly hypersthene-normative and have a lower TiO2 content suggests that the basaltic liquids of Site 462 were generated at shallower depths (<5 kbar) than ocean-ridge tholeiite: Site 462 basalts are similar to basalts from the Manihiki Plateau and the Ontong-Java Plateau, but different from Hawaiian tholeiite of hot-spot type, with lower K2O and TiO2 content. We propose a new type of basalt, ocean-plateau tholeiite, a product of intraplate volcanism.

Description of Mn deposits and chemical composition of altered pelagic sediments of sites surveyed by R/V Vityaz in the Southern Basin of the Pacific Ocean

The object of the detailed investigations was an unusual material collected in the region of the Southern Basin of the Pacific Ocean floor, with features of intense manifestation of volcanic processes and subsequent hydrothermal alterations. These processes to a significant degree transformed the ferromanganese nodules and the pelagic sediments, causing the development of a new type of oceanic manganese mineralization.

Pragmatic Aspects of Legal Translation in the European Institutions

This paper aims at identifying and describing the current major pragmatic issues of legal translation in the context of the EU. There some facts that provide legal translation in this context with unique features, such as the binding nature of EU law for the 28 Member States and the authenticated versions of the normative acts adopted by the EU institutions. These features have led to several authors talking about a new type of legal translation that should be approached and studied independently. We aim at identifying the reasons for this as well as describing the major translation strategies and theoretical approaches that the authors have proposed in order to help EU translators and lawyerlinguists overcome the translation problems arising from divergences of legal systems and legal traditions within the Member States.

Grammar in dictionaries revisited: the case of verbs with se

This paper is a study about the way in which se structures are represented in 20 verb entries of nine dictionaries of Spanish language. There is a large number of these structures and they are problematic for native and non native speakers. Verbs of the analysis are middle-high frequency and, in the most part of the cases, very polysemous, and this allows to observe interconnections between the different se structures and the different meanings of each verb. Data of the lexicographic analysis are cross-checked with corpus analysis of the same units. As a result, it is observed that there is a large variety in the data which are offered in each dictionary and in the way they are offered, inter and intradictionary. The reasons range from the theoretical overall of each Project to practical performance. This leads to the conclusion that it is necessary to further progress in the dictionary model it is being handled, in order to offer lexico-grammatical phenomenon such as se verbs in an accurate, clear and exhaustive way.

Performatividad y arte computacional. Hacia una “DIY society”

El artículo analiza la figura del prosumidor desde los estudios visuales a partir de la combinación de la teoría de los actos de habla y los nuevos medios. El objetivo es evaluar si la distinción entre productores y consumidores, estrategias y tácticas de Michel de Certeau continúa siendo operativa en las interfaces gráficas de la cultura global de la información de Scott Lash. Para ello distingue dos tipos de performatividad de los actos de habla: la performatividad top-down del software, y la bottom-up de los juegos del lenguaje y las formas de vida. Estos tipos se aplican al análisis del discurso de los eslóganes que aparecen en los sitios web de las iniciativas “open” y de economía colaborativa, ya que las primeras están dedicadas a la producción de bienes inmateriales y las segundas a la producción de bienes materiales. El desarrollo muestra cómo los dos tipos de performatividad transforman el análisis textual de los estudios literarios y cinematográficos en una metodología capaz de investigar acciones materiales, humanas y no humanas. Las conclusiones describen el surgimiento de nuevas convenciones narrativas de poder y control ajenas a la ficción que apuntan a una “DIY society”.

Welke 'acteur' neemt de controllerrol als extraverte business partner?

Which 'actor' takes the management accountant role as an extravert business partner? Does a relation between the personal trait Extraversion and fulfilling a management accountant role as a business partner exist? Open Universiteit Nederland End thesis MSc Management, Accounting & Finance Support 1: Prof. dr. A.C.N. van de Ven RA Support 2: dr. P.C.M. Claes Examinator: dr. P. Kamminga Date of approval: September 3, 2014 student: P.R. van der Wal (studentnumber 839104017 email petervanderwal2003@yahoo.com The main question of this research is: Does a relation between the personal trait Extraversion and fulfilling a management accountant role as a business partner exist? This research is based on the dataset obtained by the controller survey 2013, executed in commission of the 'Open Universiteit' (Bork & van der Wal, 2014). From the literature review it is clear: among other management accountant roles we need business partners. And there is a relation between the personal trait Extraversion and fulfilling the role as business partner. At the same time a lack of necessary personal traits for this role has been noticed, among which is Extraversion. The factor- and cluster analyses reported by Bork & van der Wal (2014) resulted in the identification of two types of management accountant roles. In this extended research TYPE II is identified as a business partner because (s)he practices activity-combinations which are related to strategy, analyzing, supporting management in decision making, advisory, change-agency and representing the organization. 36% of the population of Dutch management accountants with a master degree (or similar) meet with the role of the business partner. Although the fulfillment of the role (TYPE II) is not purely business partnering. E.g. reporting and scorekeeping are still activities executed by TYPE II and it is not clear to what extent. Apart from that, role TYPE I executes change management and risk-management activities, which are (according to the definition) activities that belong to the business partner. The role as business partner is practiced but not that optimal as defined in theory. The logistic regression analyses on the survey-data show that Extraversion among three other triggers is significant for the prediction of the fulfillment of the management accountant role (Bork & van der Wal, 2014). A more extravert personal trait predicts a preference for TYPE II, which relates to the business partner. This 'in depth research' concentrated on the relation between the Big Five personal traits and the six activity-combinations (factors) instead of on the two clusters (I and II). The statistic analyses confirm the predicting influence of Extraversion on the business partner role. Although, except for one factor, no extra significance has been found in this additional research. The essential question can be confirmed positively: the management accountant role business partner exists in practice, some management accountants are more extravert then others, and there is a positive relation between extraversion and fulfilling the business partner role. Some formulated research limitations are related to the statistical weakness of some prediction outcomes and to interpretation differences that might occur. Further research can e.g. concentrate on the other personal traits and the significance for role-differentiation in education programs. The management accountant survey 2013 Management accountant roles in 2013 in the Netherlands Open Universiteit Nederland End thesis MSc Management, Accounting & Finance Support 1: Prof. dr. A.C.N. van de Ven RA Support 2: dr. P.C.M. Claes Examinator: dr. P. Kamminga Date of approval: September 3, 2014 student: P.R. van der Wal and H.J. Bork studentnumber: 839104017 and 838532340) email: petervanderwal2003@yahoo.com and hjbork@hotmail.com This paper describes the conceptual model and results of the 'management accountants survey 2013'. The survey is part of a longitudinal survey, earlier executed in 2004, 2007 and 2010 under responsibility of the 'Open Universiteit Nederland'. Secondly the dataset of this survey will be used by us to do our own analyses on the predicting value of the triggers 'personality factor: extraversion' and 'lever of control: interactive controls' on the management accounting role that comes close to a role defined as 'Business Partner'. Scientific research shows that there are different management accounting roles, and that these roles change and that preferences exist for certain roles (Verstegen B. , Loo, Mol, Slagter, & Geerkens, 2007). The main question that will be answered in this paper is which coherent combinations of activities are being executed by management accountants in 2013 in the Netherlands by master-graduates? And secondly which triggers of management accountants' activities predict to which cluster a management accountant belongs? The conceptual model of this research has been developed in 2004 (Verstegen B. , Loo, Mol, Slagter, & Geerkens, 2007). For this research the same 37 activities as in the former researches are included (appendix 1). In the trigger-set (appendix 1) some adaptations have been made for reasons of restricting the length of the survey and to pinpoint on particular research goals (e.g. personality and levers of control). The coherent combinations of activities were found by a factor-analysis and the groups of controllers by a cluster analysis. A regression analysis shows which trigger-items are most significant. The survey has been sent to 2.353 students that finished a controller-study on a Dutch University. There was a 9% (211) response with a completely filled survey. 137 of which indicated to work in a controller-function at the moment. These controllers have been included in the results. The factor-analysis results in six different coherent combinations of activities (factors). Shortly these factors are: advising top management on strategic level with result-effecting information (1), organizing internal reporting (2) organizing and representing the organization on external reporting (3), advising and managing changes by shortcomings in processes and control systems (4), maintaining and managing administrative organization- , information- and control systems (5) and organizing/executing risk management and internal audit (6). Factors 4, 5 and 6 are clustered in cluster TYPE I (125 controllers) and factors 1, 2 and 3 in cluster TYPE II (69 controllers). TYPE II can be associated with the management accountant role 'Business Partner', although the accountant keeps partly active in a scorekeeper role. The four most significant triggers for predicting being a TYPE II controller are 'Executing a risk-management task in order to meet compliance standards' (1), extraversion (2), company size in terms of fte (3) and gender (4).

Extruded colour-based plastic film for the measurement of dissolved CO2

Dissolved CO2 measurements are usually made using a Severinghaus electrode, which is bulky and can suffer from electrical interference. In contrast, optical sensors for gaseous CO2, whilst not suffering these problems, are mainly used for making gaseous (not dissolved) CO2 measurements, due to dye leaching and protonation, especially at high ionic strengths (>0.01 M) and acidity (<pH 4). This is usually prevented by coating the sensor with a gas-permeable, but ion-impermeable, membrane (GPM). Herein, we introduce a highly sensitive, colourimetric-based, plastic film sensor for the measurement of both gaseous and dissolved CO2, in which a pH-sensitive dye, thymol blue (TB) is coated onto particles of hydrophilic silica to create a CO2-sensitive, TB-based pigment, which is then extruded into low density polyethylene (LDPE) to create a GPM-free, i.e. naked, TB plastic sensor film for gaseous and dissolved CO2 measurements. When used for making dissolved CO2 measurements, the hydrophobic nature of the LDPE renders the film: (i) indifferent to ionic strength, (ii) highly resistant to acid attack and (iii) stable when stored under ambient (dark) conditions for >8 months, with no loss of colour or function. Here, the performance of the TB plastic film is primarily assessed as a dissolved CO2 sensor in highly saline (3.5 wt%) water. The TB film is blue in the absence of CO2 and yellow in its presence, exhibiting 50% transition in its colour at ca. 0.18% CO2. This new type of CO2 sensor has great potential in the monitoring of CO2 levels in the hydrosphere, as well as elsewhere, e.g. food packaging and possibly patient monitoring.

Retrodirective Assisted Secure Wireless Key Establishment

In this paper a new type of architecture for secure wireless key establishment is proposed. A retrodirective array (RDA) that is configured to receive and re-transmit at different frequencies is utilized as a relay node. The RDA is able to respond in ‘real-time’, reducing the required number of time slots to two. More importantly, in this architecture equivalent reciprocal wireless channels between legitimate keying nodes can be randomly updated within one channel coherence time period, leading to greatly increased key generation rates (KGRs) in slow fading environment. The secrecy performance of this RDA assisted key generation system is evaluated under several eavesdropping strategies and it is shown that it outperforms previous relay key generation systems.

Synthèse de sulfilimines et de sulfoximines catalysée par les métaux de transition

Les sulfilimines et les sulfoximines sont des motifs structuraux dont l’intérêt synthétique est grandissant, notamment du fait de leurs applications en chimie médicinale et en agrochimie. Les travaux rapportés dans cet ouvrage décrivent le développement de nouvelles méthodes de synthèse efficaces pour la production de ces unités atypiques. Ces méthodes sont basées sur la réactivité d’une source d’azote électrophile, vis-à-vis de thioéthers et de sulfoxydes. L’utilisation d’un complexe métallique introduit en quantité catalytique a permis de favoriser le processus réactionnel. En tirant bénéfice de l’expertise de notre groupe de recherche sur le développement de réactions d’amination stéréosélectives de liaisons C-H et d’aziridination de styrènes, nous avons d’abord étudié la réactivité des N-mésyloxycarbamates comme source d’azote électrophile. Après avoir optimisé sa synthèse sur grande échelle, ce réactif chiral a été utilisé dans des réactions d’amination de thioéthers et de sulfoxydes, catalysées par un dimère de rhodium (II) chiral. Un processus diastéréosélectif efficace a été mis au point, permettant de produire des sulfilimines et des sulfoximines chirales avec d’excellents rendements et sélectivités. Au cours de l’optimisation de cette méthode de synthèse, nous avons pu constater l’effet déterminant de certains additifs sur la réactivité et la sélectivité de la réaction. Une étude mécanistique a été entreprise afin de comprendre leur mode d’action. Il a été observé qu’une base de Lewis telle que le 4-diméthylaminopyridine (DMAP) pouvait se coordiner au dimère de rhodium(II) et modifier ses propriétés structurales et redox. Les résultats que nous avons obtenus suggèrent que l’espèce catalytique active est un dimère de rhodium de valence mixte Rh(II)/Rh(III). Nous avons également découvert que l’incorporation de sels de bispyridinium avait une influence cruciale sur la diastéréosélectivité de la réaction. D’autres expériences sur la nature du groupe partant du réactif N-sulfonyloxycarbamate nous ont permis de postuler qu’une espèce nitrénoïde de rhodium était l’intermédiaire clé du processus d’amination. De plus, l’exploitation des techniques de chimie en débit continu nous a permis de développer une méthode d’amination de thioéthers et de sulfoxydes très performante, en utilisant les azotures comme source d’azote électrophile. Basée sur la décompositon photochimique d’azotures en présence d’un complexe de fer (III) simple et commercialement disponible, nous avons été en mesure de produire des sulfilimines et des sulfoximines avec d’excellents rendements. Le temps de résidence du procédé d’amination a pu être sensiblement réduit par la conception d’un nouveau type de réacteur photochimique capillaire. Ces améliorations techniques ont permis de rendre la synthèse plus productive, ce qui constitue un élément important d’un point de vue industriel.

HATWALK/ Guerilla Millinery/ Part of the Cultural Olympiad

Stealth Visor for the Duke of Wellington Project HATWALK The 2012 Cultural Olympiad would not have been representative of London's creative industries without fashion design. Sponsored by the Mayor of London brought milliners to organise an alternative to the catwalk format , the designers brought together a Hatwalk, uniting landmark heritage statues, classical and modern, to be crowned with a new bespoke design piece each. Together forming a pedestrian navigation through the Jubilee city, the hats also invited twenty one milliners to consider the specificity of working for the great outdoors. Rigorously tested in wind tunnel laboratory to withstand hurricane wind speeds and squally shows the designs aim to bring the 'exclusive' culture of fashion accessories to the inclusive culture of international festival. Working with new technologies of engineering, such as laser measuring tools, and crane for assemblage and fitting, McLean brings new meaning to the familiar figures of national public authority. Since the storming of the Bastille in revolutionary France it has been traditional for the new order to symbolize change through attacking public statuary. In a similar vein, Hatwalk, invites spectators to reconsider the relationship between distant and lofty personages of power and the sartorial insignia through which their power is signified. Crowned with a revolutionary red ' large plexi punk neon number' the Duke of Wellington, at Wellington arch is the first in the Hatwalk exhibition. The originality of this research consists in the effects of surprise and Brechtian 'de familiarisation' resulting from the unexpected. The effects of this structural carnivalesque inversion of authorities can involve a range of reactions from the disdain of the offended to the laughter and pleasure of the surprised. This strategy of bringing the ludic element of play to the formalised authority of legitimised power is also signified through the conscious use of materials and colour in a monochrome and uniform culture of statuary. Here the difference in materials and visible surface of the design signifies the differences that need to be included within a socio political order before it may takes its place in history as being representative of the people it is entrusted to lead. This research output continues the work that led to the Hat Anthology exhibition (output 1), the Fifty Hats that Changed the World (output 2), the Jamaican Olympic team headwear design ( output 4), and is continued in the design, merchandise, accessories and avant garde artefacts of the House of Flora ( see website). The iterative process of the research brings innovation within continuity to McLean's work. It is difficult to theorise the 'rigour' that is undeniably present in a creative design praxis except in that McLean;s research outputs are always surprising and unexpected.

Développement de fibres optiques composites pour la génération du supercontinuum dans l’infrarouge

Les sources laser à large bande possédant les caractéristiques requises pour émettre sur la plage spectrale correspondant à la seconde fenêtre de transmission atmosphérique (3 à 5 μm) exercent un attrait considérable pour divers domaines tels que la télédétection de polluants atmosphériques et les contremesures infrarouges. Les supercontinua générés à l’intérieur de fibres optiques représentent une option intéressante pour réaliser ce type de sources laser. En effet, ils possèdent une intensité élevée, un large contenu spectral, une excellente directionnalité de faisceau, ainsi qu’un bon potentiel pour constituer des sources lumineuses compactes et robustes. Toutefois, la génération d’un tel supercontinuum implique certains défis à relever sur le plan de la conception des fibres optiques employées. En fait, ces fibres optiques doivent présenter de faibles pertes de propagation sur la plage spectrale de 3 à 5 μm, posséder un paramètre de non-linéarité élevé et permettre le pompage en régime anomal de dispersion à des longueurs d’onde pour lesquelles des sources laser compactes sont offertes commercialement. En matière de robustesse, ces fibres doivent également démontrer de bonnes propriétés mécaniques ainsi qu’une stabilité chimique appropriée vis-à-vis de la corrosion causée par l’humidité. Dans le cadre de cette thèse, un nouveau type de fibres composites à saut d’indice fortement contrasté a été développé pour atteindre ces objectifs de génération de supercontinuum. Ce type de fibres combine respectivement un verre de tellurite et un verre de germanate pour son coeur et sa gaine permettant ainsi d’atteindre une différence d’indice de réfraction d’environ 0.3 entre ces deux dernières structures. Grâce à cet important saut d’indice, ces fibres peuvent fortement confiner les modes optiques à l’intérieur de leur coeur, ce qui leur donne la possibilité d’atteindre un niveau élevé de non-linéarité et d’optimiser leurs caractéristiques de dispersion chromatique pour la génération du supercontinuum. D’autre part, leur section transversale toute solide leur confère aussi une meilleure stabilité environnementale comparativement à celle démontrée par les fibres optiques microstructurées à base de verres d’oxydes de métaux lourds, de verres de chalcogénure et de verres fluorés. Toutefois, leur fabrication nécessite l’appariement de verres dont les propriétés thermomécaniques concordent suffisamment ensemble pour permettre leur fibrage. Les travaux effectués ici démontrent la production de fibres optiques composites et leur potentiel pour la génération du supercontinuum dans l’infrarouge moyen.