Industrial emissions abatement: Untangling the impact of the EU ETS and the economic crisis

In this study we use historical emission data from installations under the European Union Emissions Trading System, -EU ETS- to evaluate the impact of this policy on industrial greenhouse gas emissions during the first two trading phases, 2005-2012. As such the analysis seeks to disentangle two causes of emission abatement: that attributable to the EU ETS and that attributable to the economic crisis that hit the EU in 2008/09. Using a panel data approach the estimated emissions reduction attributable to the EU ETS is about 21 per cent of the total emission abatement during the observation period. These results suggest therefore that the lion’s share of abatement was attributable to the effects of the economic crisis, a finding that has serious implications for future policy adjustments affecting core elements of the EU ETS, including the distribution of EU emission allowances.

Rapid analysis of multiclass antibiotic residues and some of their metabolites in hospital, urban wastewater and river water by ultra-highperformance liquid chromatography coupled to quadrupole-linear ion trap tandem mass spectrometry

The present work describes the development of a fast and robust analytical method for the determination of 53 antibiotic residues, covering various chemical groups and some of their metabolites, in environmental matrices that are considered important sources of antibiotic pollution, namely hospital and urban wastewaters, as well as in river waters. The method is based on automated off-line solid phase extraction (SPE) followed by ultra-high-performance liquid chromatography coupled to quadrupole linear ion trap tandem mass spectrometry (UHPLC–QqLIT). For unequivocal identification and confirmation, and in order to fulfill EU guidelines, two selected reaction monitoring (SRM) transitions per compound are monitored (the most intense one is used for quantification and the second one for confirmation). Quantification of target antibiotics is performed by the internal standard approach, using one isotopically labeled compound for each chemical group, in order to correct matrix effects. The main advantages of the method are automation and speed-up of sample preparation, by the reduction of extraction volumes for all matrices, the fast separation of a wide spectrum of antibiotics by using ultra-high-performance liquid chromatography, its sensitivity (limits of detection in the low ng/L range) and selectivity (due to the use of tandem mass spectrometry) The inclusion of β-lactam antibiotics (penicillins and cephalosporins), which are compounds difficult to analyze in multi-residue methods due to their instability in water matrices, and some antibiotics metabolites are other important benefits of the method developed. As part of the validation procedure, the method developed was applied to the analysis of antibiotics residues in hospital, urban influent and effluent wastewaters as well as in river water samples

Identification of new transformation products during enzymatic treatment of tetracycline and erythromycin antibiotics at laboratory scale by an on-line turbulent flow liquid-chromatography coupled to a high resolution mass spectrometer LTQ-Orbitrap

This work describes the formation of transformation products (TPs) by the enzymatic degradation at laboratory scale of two highly consumed antibiotics: tetracycline (Tc) and erythromycin (ERY). The analysis of the samples was carried out by a fast and simple method based on the novel configuration of the on-line turbulent flow system coupled to a hybrid linear ion trap – high resolution mass spectrometer. The method was optimized and validated for the complete analysis of ERY, Tc and their transformation products within 10 min without any other sample manipulation. Furthermore, the applicability of the on-line procedure was evaluated for 25 additional antibiotics, covering a wide range of chemical classes in different environmental waters with satisfactory quality parameters. Degradation rates obtained for Tc by laccase enzyme and ERY by EreB esterase enzyme without the presence of mediators were ∼78% and ∼50%, respectively. Concerning the identification of TPs, three suspected compounds for Tc and five of ERY have been proposed. In the case of Tc, the tentative molecular formulas with errors mass within 2 ppm have been based on the hypothesis of dehydroxylation, (bi)demethylation and oxidation of the rings A and C as major reactions. In contrast, the major TP detected for ERY has been identified as the “dehydration ERY-A”, with the same molecular formula of its parent compound. In addition, the evaluation of the antibiotic activity of the samples along the enzymatic treatments showed a decrease around 100% in both cases

Nova indústria i nova política industrial

La indústria ha tingut, i té encara, un paper clau en la vertebració de l"economia catalana i en la generació d"efectes multiplicadors que faciliten el desenvolupament de la resta d"activitats i el benestar de la societat. Actualment, i més enllà de la crisi econòmica i financera global, s"està generant un nou model industrial d"àmbit internacional caracteritzat per importants canvis en la naturalesa i la dinàmica dels mercats i en les estratègies de les empreses, per la internacionalització dels processos de producció i la seva repercussió sobre l"organització de les empreses i per la creixent importància dels processos d"innovació.

Systematic evaluation of matrix effects in hydrophilic interaction chromatography versus reversed phase liquid chromatography coupled to mass spectrometry.

Reversed phase liquid chromatography (RPLC) coupled to mass spectrometry (MS) is the gold standard technique in bioanalysis. However, hydrophilic interaction chromatography (HILIC) could represent a viable alternative to RPLC for the analysis of polar and/or ionizable compounds, as it often provides higher MS sensitivity and alternative selectivity. Nevertheless, this technique can be also prone to matrix effects (ME). ME are one of the major issues in quantitative LC-MS bioanalysis. To ensure acceptable method performance (i.e., trueness and precision), a careful evaluation and minimization of ME is required. In the present study, the incidence of ME in HILIC-MS/MS and RPLC-MS/MS was compared for plasma and urine samples using two representative sets of 38 pharmaceutical compounds and 40 doping agents, respectively. The optimal generic chromatographic conditions in terms of selectivity with respect to interfering compounds were established in both chromatographic modes by testing three different stationary phases in each mode with different mobile phase pH. A second step involved the assessment of ME in RPLC and HILIC under the best generic conditions, using the post-extraction addition method. Biological samples were prepared using two different sample pre-treatments, i.e., a non-selective sample clean-up procedure (protein precipitation and simple dilution for plasma and urine samples, respectively) and a selective sample preparation, i.e., solid phase extraction for both matrices. The non-selective pretreatments led to significantly less ME in RPLC vs. HILIC conditions regardless of the matrix. On the contrary, HILIC appeared as a valuable alternative to RPLC for plasma and urine samples treated by a selective sample preparation. Indeed, in the case of selective sample preparation, the compounds influenced by ME were different in HILIC and RPLC, and lower and similar ME occurrence was generally observed in RPLC vs. HILIC for urine and plasma samples, respectively. The complementary of both chromatographic modes was also demonstrated, as ME was observed only scarcely for urine and plasma samples when selecting the most appropriate chromatographic mode.

Implantació d’una nau industrial destinada a la fabricació de contenidors de reciclatge

El projecte s’ha realitzat a CONSTRUCCIÓ TÈCNICA INDUSTRIAL DEL TERSLU, empresa situada a Aiguaviva, municipi de Girona. Aquesta empresa es dedica a la construcció metàl•lica, però sobretot a la construcción d’estructures metàl•liques lleugeres i pesades, caldereria i manteniment industrial. L’objecte del projecte és buscar un mètode per la reducció del temps de fabricació imillorar la distribució en planta. Per a això s’han d’investigar diferents alternatives icomparar-les entre si per arribar a un resultat final satisfactori. La implantació de la nova distribució en planta com a objectiu final vol aconseguiraugmentar els beneficis globals de l’empresa. Això s.aconsegueix analitzant diferentsdistribucions, l’aplicació de diferents processos de fabricació i muntatge i augmentant lacoordinació entre el departament tècnic i el taller

CO2 utilization in the perspective of industrial ecology, an overview

Carbon dioxide emissions from anthropic activities have accumulated in the atmosphere in excess of 800 Gigatons since preindustrial times, and are continuously increasing. Among other strategies, CO2 capture and storage is one option to mitigate the emissions from large point sources. In addition, carbon dioxide extraction from ambient air is assessed to reduce the atmospheric concentration of CO2. Both direct and indirect (through photosynthesis) pathways are possible. Geological sequestration has significant disadvantages (high cost, low public acceptance, long term uncertainty) whereas carbon dioxide recycling (or utilization) is more consistent with the basic principle of industrial ecology, almost closing material cycles. In this article, a series of technologies for CO2 capture and valorization is described as integrated and optimized pathways. This integration increases the environmental and economic benefits of each technology. Depending on the source of carbon dioxide, appropriate capture and valorization processes are evaluated based on material and energy constraints.

Fast and sensitive supercritical fluid chromatography - tandem mass spectrometry multi-class screening method for the determination of doping agents in urine.

This study shows the possibility offered by modern ultra-high performance supercritical fluid chromatography combined with tandem mass spectrometry in doping control analysis. A high throughput screening method was developed for 100 substances belonging to the challenging classes of anabolic agents, hormones and metabolic modulators, synthetic cannabinoids and glucocorticoids, which should be detected at low concentrations in urine. To selectively extract these doping agents from urine, a supported liquid extraction procedure was implemented in a 48-well plate format. At the tested concentration levels ranging from 0.5 to 5 ng/mL, the recoveries were better than 70% for 48-68% of the compounds and higher than 50% for 83-87% of the tested substances. Due to the numerous interferences related to isomers of steroids and ions produced by the loss of water in the electrospray source, the choice of SFC separation conditions was very challenging. After careful optimization, a Diol stationary phase was employed. The total analysis time for the screening assay was only 8 min, and interferences as well as susceptibility to matrix effect (ME) were minimized. With the developed method, about 70% of the compounds had relative ME within the range ±20%, at a concentration of 1 and 5 ng/mL. Finally, limits of detection achieved with the above-described strategy including 5-fold preconcentration were below 0.1 ng/mL for the majority of the tested compounds. Therefore, LODs were systematically better than the minimum required performance levels established by the World anti-doping agency, except for very few metabolites.

Estudi d’un assecador industrial: simulació i optimització de l’assecatge de xoriç mitjançant programari informàtic CFD

Una empresa familiar d’embotits ecològics especialitzada en l’elaboració de xoriç, volampliar la seva producció. Té com apart clau el procés d’estufatge i l’assecament. Aquests processos, que tenen lloc alsassecadors, consisteixen en fer re-circular aire a unes temperatures determinades durant unscerts temps, refredant aquest aire quan surt de la sala per extreure’n part del vapor d’aiguaque conté, i tornant-lo a escalfar per poder absorbir més aigua en tornar entrar a la sala.L’abast d’aquest projecte consisteix en la descripció del funcionament dels assecadors,i la realització de simulacions de flux d’aire i temperatura per tal de poder optimitzar unassecador concret. Dins aquest assecador es faran modificacions com pot ser l’alçada lliure quequeda entre la filera més elevada de xoriç i el sostre o el radi inferior que tenen aquestsaparells per tal d’obtenir una geometria òptima d’una sala d’assecatge. L’estudi que es duu a terme consta del comportament del flux d’aire i del flux detemperatura per tal de poder observar els punts crítics i poder determinar els paràmetres queinflueixen en el seu bon funcionament

Is Transnational Private Regulation Potentially an Effective Means of Promoting Collective Industrial Relations?

This paper asks whether collective industrial relations can be promoted by means other than seeking change in public policy. Recent research points to the increasing significance of transnational private regulation (TPR) in developing economies. There is an emerging consensus that market incentives to improve wages and conditions of work can have a modest positive effect on measurable outcomes like hours of work, and health and safety. However, it appears that TPR has little impact on the capacity of workers to pursue such improvements for themselves via collective action. The paper takes a closer look at the potential of TPR to enhance worker voice and participation. It argues that this potential cannot be properly evaluated without understanding how local actors mobilise the social and political resources that TPR provides. The case studies presented show how different TPR schemes have been used by unions in Africa as a means to pursue the interests of members. The authors found that the scale of the impact of TPR in all of the contexts studied depended almost entirely on the existing capacities and resources of the unions involved. TPR led to the creation of collective industrial relations processes, or helped unions to ensure that certain enterprises participated in existing industrial relations processes, but did virtually nothing to enhance the political and organisational capacity of the unions to influence the outcomes of those processes in terms of wages and conditions of employment. The paper concludes that the potential of TPR to promote the emergence of collective industrial relations systems is very low.

Identification of metabolites and thermal transformation products of quinolones in raw cow milk by liquid chromatography coupled to high resolution mass spectrometry

The presence of residues of antibiotics, metabolites, and thermal transformation products (TPs), produced during thermal treatment to eliminate pathogenic microorganisms in milk, could represent a risk for people. Cow"s milk samples spiked with enrofloxacin (ENR), ciprofloxacin (CIP), difloxacin (DIF), and sarafloxacin (SAR) and milk samples from cows medicated with ENR were submitted to several thermal treatments. The milk samples were analyzed by liquid chromatography-mass spectrometry (LC-MS) to find and identify TPs and metabolites. In this work, 27 TPs of 4 quinolones and 24 metabolites of ENR were found. Some of these compounds had been reported previously, but others were characterized for the first time, including lactose-conjugated CIP, the formamidation reaction for CIP and SAR, and hydroxylation or ketone formation to produce three different isomers for all quinolones studied.

The Spatial effects of transportation on industrial employment

This paper examines the direct and indirect impacts of transport infrastructure on industrial employment. We estimate regressions with spatial econometric methods using data from the Spanish regions for the period 1995-2008. We find that the density of motorways and the amount of port traffic (particularly general non-containerized and container traffic) are significant determinants of industrial employment in the region, while the effects of railway density and the amount of airport traffic are unclear. Our empirical analysis shows the existence of significant negative spatial spillovers for the density of motorways and levels of container port traffic while the impact of general non-containerized port traffic seems to be mainly local.

Avaliação quantitativa de cardenolídeos no cultivar experimental de Digitalis lanata do maciço do itatiaia e perspectivas de seu emprego industrial

The content of digoxin and lanatoside C (jointly quantified), lanatoside A, lanatoside B, glucoevatromonoside, odorobioside G, glucogitoroside, glucoverodoxine, glucodigifucoside and digitalinum verum was determined by HPLC in Digitalis lanata harvested in Brazil, as well as in clones industrially employed for the production of cardenolides. The Brazilian plants presented greater variation in the contents of cardenolides than the analyzed clones. Lanatoside C and digoxin concentrations were higher in the clones (6120±640 nmol/g dry leaf) than in the Brazilian plants (1820±900 nmol/g dry leaf). The concentrations of these glycosides were found to be within the range described for native species and also were similar to an European cultivar, what makes possible its industrial use for the cardenolides production.

Model-based objects recognition in industrial environments for autonomous vehicles control

Behavior-based navigation of autonomous vehicles requires the recognition of the navigable areas and the potential obstacles. In this paper we describe a model-based objects recognition system which is part of an image interpretation system intended to assist the navigation of autonomous vehicles that operate in industrial environments. The recognition system integrates color, shape and texture information together with the location of the vanishing point. The recognition process starts from some prior scene knowledge, that is, a generic model of the expected scene and the potential objects. The recognition system constitutes an approach where different low-level vision techniques extract a multitude of image descriptors which are then analyzed using a rule-based reasoning system to interpret the image content. This system has been implemented using a rule-based cooperative expert system