Supply base development for life-cycle business

Yritysten liiketoimintamallit ovat jatkuvan kehityksen kohteena. Viimeisinä vuosina valmistavien yhtiöiden kiinnostus huolehtia asiakkaistaan koko tuotteen elinkaaren aikana ja tarjota erilaisia palveluita asiakkailleen on kasvanut. Tämän palvelujen laajentumisen myötä myös vaateet yrityksen omaa toimittajakenttää kohtaan ovat muuttuneet. Yritykset eivät kykene tuottamaan kaikkia tuotteistamiaan palveluja itse, jolloin yrityksen toimittajakenttä ja sen kyvykkyydet tuottaa tarvittavia palveluita ovat avainasemassa yrityksen menestystekijänä. Tämän työn teoriaosuudessa on esitelty toimittajakentän hallinnan perusteorioita. Kirjallisuus osuuden lisäksi työssä on hyödynnetty toimintatutkimusta kohdeyrityksessä. Tässä diplomityössä on tutkittu mahdollisia keinoja kehittää organisaation omaa toimintaa ja sekä yrityksen toimittajakenttää niin, että se tukee liiketoimintamallin kehitystä koneenrakennusyrityksestä kohti elinkaariliiketoimintaa. Työssä esitetyt keinot voidaan ottaa käyttöön, joko yksitellen tai kokonaisuutena.

High frequencies of plexiform neurofibromas, mental retardation, learning difficulties, and scoliosis in Brazilian patients with neurofibromatosis type 1

A clinical study of Brazilian patients with neurofibromatosis type 1 (NF1) was performed in a multidisciplinary Neurofibromatosis Program called CEPAN (Center of Research and Service in Neurofibromatosis). Among 55 patients (60% females, 40% males) who met the NIH criteria for the diagnosis of NF1, 98% had more than six café-au-lait patches, 94.5% had axillary freckling, 45% had inguinal freckling, and 87.5% had Lisch nodules. Cutaneous neurofibromas were observed in 96%, and 40% presented plexiform neurofibromas. A positive family history of NF1 was found in 60%, and mental retardation occurred in 35%. Some degree of scoliosis was noted in 49%, 51% had macrocephaly, 40% had short stature, 76% had learning difficulties, and 2% had optic gliomas. Unexpectedly high frequencies of plexiform neurofibromas, mental retardation, learning difficulties, and scoliosis were observed, probably reflecting the detailed clinical analysis methods adopted by the Neurofibromatosis Program. These same patients were screened for mutations in the GAP-related domain/GRD (exons 20-27a) by single-strand conformation polymorphism. Four different mutations (Q1189X, 3525-3526delAA, E1356G, c.4111-1G>A) and four polymorphisms (c.3315-27G>A, V1146I, V1317A, c.4514+11C>G) were identified. These data were recently published.

Geochemistry and water quality of Lake Qarun, Egypt

Water geochemistry is a very important tool for studying the water quality in a given area. Geology and climate are the major natural factors controlling the chemistry of most natural waters. Anthropogenic impacts are the secondary sources of contamination in natural waters. This study presents the first integrative approach to the geochemistry and water quality of surface waters and Lake Qarun in the Fayoum catchment, Egypt. Moreover, geochemical modeling of Lake Qarun was firstly presented. The Nile River is the main source of water to the Fayoum watershed. To investigate the quality and geochemistry of this water, water samples from irrigation canals, drains and Lake Qarun were collected during the period 2010‒2013 from the whole Fayoum drainage basin to address the major processes and factors governing the evolution of water chemistry in the investigation area. About 34 physicochemical quality parameters, including major ions, oxygen isotopes, trace elements, nutrients and microbiological parameters were investigated in the water samples. Multivariable statistical analysis was used to interpret the interrelationship between the different studied parameters. Geochemical modeling of Lake Qarun was carried out using Hardie and Eugster’s evolutionary model and a model simulated by PHREEQC software. The crystallization sequence during evaporation of Lake Qarun brine was also studied using a Jänecke phase diagram involving the system Na‒K‒Mg‒ Cl‒SO4‒H2O. The results show that the chemistry of surface water in the Fayoum catchment evolves from Ca- Mg-HCO3 at the head waters to Ca‒Mg‒Cl‒SO4 and eventually to Na‒Cl downstream and at Lake Qarun. The main processes behind the high levels of Na, SO4 and Cl in downstream waters and in Lake Qarun are dissolution of evaporites from Fayoum soils followed by evapoconcentration. This was confirmed by binary plots between the different ions, Piper plot, Gibb’s plot and δ18O results. The modeled data proved that Lake Qarun brine evolves from drainage waters via an evaporation‒crystallization process. Through the precipitation of calcite and gypsum, the solution should reach the final composition "Na–Mg–SO4–Cl". As simulated by PHREEQC, further evaporation of lake brine can drive halite to precipitate in the final stages of evaporation. Significantly, the crystallization sequence during evaporation of the lake brine at the concentration ponds of the Egyptian Salts and Minerals Company (EMISAL) reflected the findings from both Hardie and Eugster’s evolutionary model and the PHREEQC simulated model. After crystallization of halite at the EMISAL ponds, the crystallization sequence during evaporation of the residual brine (bittern) was investigated using a Jänecke phase diagram at 35 °C. This diagram was more useful than PHREEQC for predicting the evaporation path especially in the case of this highly concentrated brine (bittern). The predicted crystallization path using a Jänecke phase diagram at 35 °C showed that halite, hexahydrite, kainite and kieserite should appear during bittern evaporation. Yet the actual crystallized mineral salts were only halite and hexahydrite. The absence of kainite was due to its metastability while the absence of kieserite was due to opposed relative humidity. The presence of a specific MgSO4.nH2O phase in ancient evaporite deposits can be used as a paleoclimatic indicator. Evaluation of surface water quality for agricultural purposes shows that some irrigation waters and all drainage waters have high salinities and therefore cannot be used for irrigation. Waters from irrigation canals used as a drinking water supply show higher concentrations of Al and suffer from high levels of total coliform (TC), fecal coliform (FC) and fecal streptococcus (FS). These waters cannot be used for drinking or agricultural purposes without treatment, because of their high health risk. Therefore it is crucial that environmental protection agencies and the media increase public awareness of this issue, especially in rural areas.

Software business expansion through distribution channel : Case M-Files - Denmark

The purpose of this study was to find out how a software company can successfully expand business to the Danish software market through distribution channel. The study was commissioned by a Finnish software company and it was conducted using a qualitative research method by analyzing external and internal business environment, and interviewing Danish ICT organizations and M-Files personnel. Interviews were semi-structured interviews, which were designed to collect comprehensive information on the existing ICT and software market in Denmark. The research used three external and internal analyzing frameworks; PEST analysis (market level), Porter´s Five Force analysis (industry level competition) and SWOT analysis (company level). Distribution channels theory was a base to understand why and what kind of distribution channels the case company uses, and what kind of channels target markets companies’ uses. Channel strategy and design were integrated to the industry level analysis. The empirical findings revealed that Denmark has very business friendly ICT environment. Several organizations have ranked Denmark´s information and communication technology as the best in the world. Denmark’s ICT and software market are relatively small, compared to many other countries in Europe. Danish software market is centralized. Largest software clusters are in the largest cities; Copenhagen, Aarhus, Odense and Aalborg. From these clusters, software companies can most likely find suitable resellers. The following growing trends are clearly seen in the software market: mobile and wireless applications, outsourcing, security solutions, cloud computing, social business solutions and e-business solutions. When expanding software business to the Danish market, it is important to take into account these trends. In Denmark distribution channels varies depending on the product or service. For many, a natural distribution channel is a local partner or internet. In the public sector solutions are purchased through a public procurement process. In the private sector the buying process is more straight forwarded. Danish companies are buying software from reliable suppliers. This means that they usually buy software direct from big software vendors or local partners. Some customers prefer to use professional consulting companies. These consulting companies can strongly influence on the selection of the supplier and products, and in this light, consulting companies can be important partners for software companies. Even though the competition is fierce in ECM and DMS solutions, Danish market offers opportunities for foreign companies. Penetration to the Danish market through reseller channel requires advanced solutions and objective selection criteria for channel partners. Based on the findings, Danish companies are interested in advanced and efficient software solutions. Interest towards M-Files solutions was clearly seen and the company has excellent opportunity to expand business to the Danish market through reseller channel. Since the research explored the Danish ICT and software market, the results of the study may offer valuable information also to the other software companies which are expanding their business to the Danish market.

Cloud computing contribution to manufacturing industry

Manufacturing industry has been always facing challenge to improve the production efficiency, product quality, innovation ability and struggling to adopt cost-effective manufacturing system. In recent years cloud computing is emerging as one of the major enablers for the manufacturing industry. Combining the emerged cloud computing and other advanced manufacturing technologies such as Internet of Things, service-oriented architecture (SOA), networked manufacturing (NM) and manufacturing grid (MGrid), with existing manufacturing models and enterprise information technologies, a new paradigm called cloud manufacturing is proposed by the recent literature. This study presents concepts and ideas of cloud computing and cloud manufacturing. The concept, architecture, core enabling technologies, and typical characteristics of cloud manufacturing are discussed, as well as the difference and relationship between cloud computing and cloud manufacturing. The research is based on mixed qualitative and quantitative methods, and a case study. The case is a prototype of cloud manufacturing solution, which is software platform cooperated by ATR Soft Oy and SW Company China office. This study tries to understand the practical impacts and challenges that are derived from cloud manufacturing. The main conclusion of this study is that cloud manufacturing is an approach to achieve the transformation from traditional production-oriented manufacturing to next generation service-oriented manufacturing. Many manufacturing enterprises are already using a form of cloud computing in their existing network infrastructure to increase flexibility of its supply chain, reduce resources consumption, the study finds out the shift from cloud computing to cloud manufacturing is feasible. Meanwhile, the study points out the related theory, methodology and application of cloud manufacturing system are far from maturity, it is still an open field where many new technologies need to be studied.

Collectiveness within startup teams – Leading the way to initiating and managing collective pursuit of opportunities in organizational contexts

While traditional entrepreneurship literature addresses the pursuit of entrepreneurial opportunities to a solo entrepreneur, scholars increasingly agree that new ventures are often founded and operated by entrepreneurial teams as collective efforts especially in hightechnology industries. Researchers also suggest that team ventures are more likely to survive and succeed than ventures founded by the individual entrepreneur although specific challenges might relate to multiple individuals being involved in joint entrepreneurial action. In addition to new ventures, entrepreneurial teams are seen central for organizing work in established organizations since the teams are able to create major product and service innovations that drive organizational success. Acknowledgement of the entrepreneurial teams in various organizational contexts has challenged the notion on the individual entrepreneur. However, considering that entrepreneurial teams represent a collective-level phenomenon that bases on interactions between organizational members, entrepreneurial teams may not have been studied as indepth as could be expected from the point of view of the team-level, rather than the individual or the individuals in the team. Many entrepreneurial team studies adopt the individualized view of entrepreneurship and examine the team members’ aggregate characteristics or the role of a lead entrepreneur. The previous understandings might not offer a comprehensive and indepth enough understanding of collectiveness within entrepreneurial teams and team venture performance that often relates to the team-level issues in particular. In addition, as the collective-level of entrepreneurial teams has been approached in various ways in the existing literatures, the phenomenon has been difficult to understand in research and practice. Hence, there is a need to understand entrepreneurial teams at the collective-level through a systematic and comprehensive perspective. This study takes part in the discussions on entrepreneurial teams. The overall objective of this study is to offer a description and understanding of collectiveness within entrepreneurial teams beyond individual(s). The research questions of the study are: 1) what collectiveness within entrepreneurial teams stands for, what constitutes the basic elements of it, and who are included in it, 2) why, how, and when collectiveness emerges or reinforces within entrepreneurial teams, and 3) why collectiveness within entrepreneurial teams matters and how it could be developed or supported. In order to answer the above questions, this study bases on three approaches, two set of empirical data, two analysis techniques, and conceptual study. The first data set consists of 12 qualitative semi-structured interviews with business school students who are seen as prospective entrepreneurs. The data is approached through a social constructionist perspective and analyzed through discourse analysis. The second data set bases on a qualitative multiplecase study approach that aims at theory elaboration. The main data consists of 14 individual and four group semi-structured thematic interviews with members of core entrepreneurial teams of four team startups in high-technology industries. The secondary data includes publicly available documents. This data set is approached through a critical realist perspective and analyzed through systematic thematic analysis. The study is completed through a conceptual study that aims at building a theoretical model of collective-level entrepreneurship drawing from existing literatures on organizational theory and social-psychology. The theoretical work applies a positivist perspective. This study consists of two parts. The first part includes an overview that introduces the research background, knowledge gaps and objectives, research strategy, and key concepts. It also outlines the existing knowledge of entrepreneurial team literature, presents and justifies the choices of paradigms and methods, summarizes the publications, and synthesizes the findings through answering the above mentioned research questions. The second part consists of five publications that address independent research questions but all enable to answer the research questions set for this study as a whole. The findings of this study suggest a map of relevant concepts and their relationships that help grasp collectiveness within entrepreneurial teams. The analyses conducted in the publications suggest that collectiveness within entrepreneurial teams stands for cognitive and affective structures in-between team members including elements of collective entity, collective idea of business, collective effort, collective attitudes and motivations, and collective feelings. Collectiveness within entrepreneurial teams also stands for specific joint entrepreneurial action components in which the structures are constructed. The action components reflect equality and democracy, and open and direct communication in particular. Collectiveness emerges because it is a powerful tool for overcoming individualized barriers to entrepreneurship and due to collectively oriented desire for, collective value orientation to, demand for, and encouragement to team entrepreneurship. Collectiveness emerges and reinforces in processes of joint creation and realization of entrepreneurial opportunities including joint analysis and planning of the opportunities and strategies, decision-making and realization of the opportunities, and evaluation, feedback, and sanctions of entrepreneurial action. Collectiveness matters because it is relevant for potential future entrepreneurs and because it affects the ways collective ventures are initiated and managed. Collectiveness also matters because it is a versatile, dynamic, and malleable phenomenon and the ideas of it can be applied across organizational contexts that require team work in discovering or creating and realizing new opportunities. This study further discusses how the findings add to the existing knowledge of entrepreneurial team literature and how the ideas can be applied in educational, managerial, and policy contexts.

A service perspective to digital innovation: exploring the emergence of autonomous shipping

Current research describes digital innovation largely similar to product innovation. Digital innovation is seen as an object of coherent activities, however in reality digital innovation results from convergence of variant technologies and those related actors with versatile business goals. To account for the dynamic nature of digital innovation, this study applies a service perspective to digital innovation. The purpose of the study is to understand how digital innovation emerges within a service ecosystem for autonomous shipping. The sub-objectives of this study are to 1) identify what factors motivate and demotivate actors to integrate resources for autonomous shipping, 2) explore the key technology areas to be integrated to realise the autonomous shipping concept, and 3) suggest how the technology areas are combined for mutual value creation within a service eco-system for autonomous shipping. Insights from autonomous driving were also included. This study draws on literatures on service innovation and service-dominant logic. The research was conducted as a qualitative exploratory case study. The data comprise interviews of 18 marine and automotive industry experts, 4 workshops, 4 seminars, and observations as well as various secondary data sources. The findings revealed that the key actors have versatile motivations regarding autonomous shipping. These varied from opportunities for single applications to occupying a central role in an autonomous technology platform. Thus, autonomous shipping can be seen as an umbrella concept comprising multiple levels. In technical terms, the development of the concept of autonomous shipping is largely based on combining existing technology solutions, which are gradually integrated towards more systemic entities comprising areas of the autonomous shipping concept. This study argues that a service perspective embraces the inherently complex and dynamic nature of digital innovation. This is captured in the developed research framework that describes digital innovation emerging on different levels of interaction: 1. strategic relationships for new solutions, 2. new local networks for technology platforms, and 3. global networks for new markets. The framework shows how the business models and motivations of digital innovation actors feed the emergence of digital innovation in overlapping service ecosystems that together comprise an innovation ecosystem for autonomous technologies. Digital innovation managers will benefit from seeing their businesses as part of a larger ecosystem of value co-creating actors. In orchestrating digital innovation within a service ecosystem, it is suggested that managers consider the resources, roles and institutions within the ecosystem. Finally, as autonomous shipping is at its infancy, the topic provides a number of interesting avenues for future research.

Ympäristövastuullisuus pienissä ja keskisuurissa cleantech-yrityksissä

Tutkimuksen tavoitteena on arvioida, kuinka pienet ja keskisuuret (pk) cleantech-ratkaisuja tarjoavat yritykset sisällyttävät ympäristövastuullisuuden omaan strategiaansa ja toimintaansa. Lisäksi tutkimuksessa pohdittiin miten cleantech-yritysten oman toiminnan ympäristövastuullisuutta olisi syytä kehittää. Tutkimus koostuu teoriaosuudesta, joka pohjautuu kirjallisuuskatsaukseen sekä empiirisestä osuudesta, joka koostuu yrityshaastatteluista. Tulokset kerättiin 16 suomalaisesta Cleantech Finland -verkostoon kuuluvasta pk-yrityksestä. Haastateltavat yritykset jaettiin kolmeen ryhmään: ICT ja palveluntarjoajat, asiantuntijayritykset sekä teknologiayritykset. Lisäksi tutkimuksessa käytettiin vertailuaineistona muutamaa suuryritys-haastattelua. Tutkimuksessa havaittiin, että cleantech-liiketoimintaa harjoittavissa yrityksissä ympäristövastuullisuus nähdään arvoihin perustuvana strategisena kilpailutekijänä, jonka keskeisinä ajureina ovat asiakkaat ja liiketoiminnalliset hyödyt. Yritysten käytännöt ja toimintatavat kuitenkin vaihtelevat suuresti ja vastuullisuuden konkreettinen integroiminen toimintaan ja strategiaan jää epäselväksi.

Formation of the Employer Brand Image

The purpose of this study was to explore the employer brand image and its formation of a Finnish (yet international) service company in B2B sector. In the research qualitative case study method was used to explore the most preferred attributes in employer attraction, the employer brand perceptions towards the case company, and the effectors behind these brand perceptions among the prospective group of employees. The research was conducted through in-depth semistructured interviews among 23-30 undergraduate or graduate business students in Finnish universities close to their graduation. After deriving the attributes of an attractive employer, and exploring their relation to the case company, the employer brand image of the case company was determined and its attractiveness level evaluated. Moreover, the formation of the employer brand image was investigated and its sources detected. The most important factors for the target group in employer attractiveness were found to be company reputation and company culture/work atmosphere. Also career opportunities and international opportunities were seen important. The case company was found to hold a positive, attractive image on company culture and international opportunities, but failing to hold a good reputation as a fair employer. The main and most impactful source of employer brand image was former and current employees - directly or indirectly. Company’s own actions played only small part in employer brand formation as credibility is a critical factor in brand image formation and corporate communication found not to be perceived genuine. Based on the findings, suggestions for further employer branding were made.

THE ADAPTATION PROCESS AND CHALLENGES OF EDUCATION EXPORT

The purpose of this study is to investigate the challenges of the adaptation process of education export. The research is conducted as a single case study that concentrates on three education export projects. The case company in the research is Team Academy. The study goes through the different forms of education export, the adaptation of education export and the challenges of the education export –process by means of theory and empirical data. The research is carried out as a qualitative research and the method used is a qualitative content analysis. More specifically the research is an abductive content analysis. The research data is collected in four in-depth interviews from Team academy representatives who have been strongly involved in certain education export –project of Team Academy. The research confirms the theory in the challenge of hierarchy, funding and registration issues, and refutes it in the challenge of competition, legislation, different governmental attitudes and knowledge in productization. The main challenges of the adaptation process are related to funding, differences in values, sudden changes, the complex nature of the learning model, concept of time, teamwork as method and accreditation. It is highlighted that in the future operations, anticipating problems that arise from for example cultural differences and differences in values, communication, managing the money flows and the company form is recommended. Future research could continue with investigating the suitable company form for education exports of this kind, and how to stand out and communicate when operating under another institution. It is considered a potential risk that a brand encloses the brand that operates under it.

Milleniaalit tietotyössä – organisaatiositoutumisen näkökulmia henkilöstöpalvelualan yrityksessä

Tämän tutkielman tavoitteena on selvittää, mitkä tekijät vaikuttavat henkilöstöpalvelualan yrityksessä työskentelevien y-sukupolveen kuuluvien tietotyöläisten organisaatiositoutumiseen ja näin löytää keinoja edistää tämän henkilöstöryhmän sitoutumista. Päätutkimuskysymys on ”Miten tietotyötä tekevän milleniaalin organisaatiositoutumista voidaan edistää?”. Tutkielma on kvalitatiivinen tapaustutkimus, aineisto kerättiin puolistrukturoiduilla haastatteluilla. Aineisto analysoitiin teoriaohjaavasti organisaatiositoutumiseen, milleniaaleihin ja tietotyöhön liittyvää teoreettista viitekehystä tukena käyttäen ja abduktiivista päättelyä hyödyntäen. Tutkimustulosten mukaan tietotyötä tekevä milleniaali on sitoutunut työhönsä, työyhteisöönsä ja organisaatioon. Organisaatiositoutuminen muodostuu useammasta kuin yhdestä komponentista ja on aineiston mukaan muodoltaan niin affektiivista, normatiivista kuin jatkuvaakin. Nykyorganisaatiossa sitouttavat erityisesti hyvä esimiestyö, työn haastavuus, mahdollisuudet työnkuvan monipuolistamiseen, uramahdollisuudet ja ammatillisen kehittymisen tukeminen. Tulevaisuudessa tietotyötä kohdeyrityksessä tekevät milleniaalit toivovat, että organisaatio panostaisi sitouttamisen edistämiseksi erityisesti yksilön arvostamiseen, työntekijöiden ammatilliseen kehittymiseen, urasuunnitteluun, palkitsemiseen, esimiestyöhön ja yhteisöllisyyteen.

Value Creation of Professional Services

The aim of this qualitative thesis is to research, how professional services create value, and what are the key factors affecting on this process. A model describing value creation process in professional services will be explained, based on the existing literature and three in depth discussions with professional service representatives. Professional services are such services that are tend to base on problem solving and require high skills and knowledge of a professional. These services often have a consultative or an advisory nature, and they often involve both client and a company in service process. As the service is often delivered in somewhat collaboration so is the value created. The results of this thesis revealed that value is created in collaboration or co-operation in professional services. Therefore, value co-creation, as a concept, is exact to describe the value creation process in professional services. This thesis also revealed that value is co- created in continuous communication between a client and a company and no value or only a little value can be created if there is no effective communication during the professional service process.

Development of a New Welding Product Quality Control and Management System Model for China

The Chinese welding industry is growing every year due to rapid development of the Chinese economy. Increasingly, companies around the world are looking to use Chinese enterprises as their cooperation partners. However, the Chinese welding industry also has its weaknesses, such as relatively low quality and weak management. A modern, advanced welding management system appropriate for local socio-economic conditions is required to enable Chinese enterprises to enhance further their business development. The thesis researches the design and implementation of a new welding quality management system for China. This new system is called ‗welding production quality control management model in China‘ (WQMC). Constructed on the basis of analysis of a survey and in-company interviews, the welding management system comprises the following different elements and perspectives: a ‗Localized congenital existing problem resolution strategies‘ (LCEPRS) database, a ‗human factor designed training system‘ (HFDT) training strategy, the theory of modular design, ISO 3834 requirements, total welding management (TWM), and lean manufacturing (LEAN) theory. The methods used in the research are literature review, questionnaires, interviews, and the author‘s model design experiences and observations, i.e. the approach is primarily qualitative and phenomenological. The thesis describes the design and implementation of a HFDT strategy in Chinese welding companies. Such training is an effective way to increase employees‘ awareness of quality and issues associated with quality assurance. The study identified widely existing problems in the Chinese welding industry and constructed a LCEPRS database that can be used in efforts to mitigate and avoid common problems. The work uses the theory of modular design, TWM and LEAN as tools for the implementation of the WQMC system.

Business modeling in turbulent environments

This study presents an agile tool set for the business modeling in companies, entering the turbulent environment. The study’s aim is to explore business modeling techniques and their tooling by utilizing a case study of a Finnish media monitoring company, expanding to the Russian market. This work proposes a tailored “two-approach” of business modeling development that analyzes both the past and future conditions of two key factors of business modeling for companies – internal and external environments. The study explores a case company by investigating the benefits and disadvantages of firm’s present business modeling tools, developing a new tooling and applying it to the case company. Among primary data utilization, such as interviews with media monitoring industry analysts and representatives of the competing companies, and academic experts, study leans up on the comprehensive analysis of Russian media monitoring niche and its players. This study benefits the business modeling research area and combines traditional analysis tools, such as market, PESTLE and competitor analyses, in a systemic manner, with the business modeling techniques. This transformation proceeds through applying of the integrated scenario, heat map and critical design issues’ analyses in the societal, industrial and competitive context of turbulent environments. The practical outcome of this approach is the development of agile business modeling tool set, customizable by company’s requirements.

Water quality and fish populations of the Welland River, Ontario /

The water quality and fish populations of the Welland River were observed to decline with distance downstream. This coincided with increased agricultural , domestic and industrial waste loadings. The river upstream of the City of Welland received considerable loadings from agricultural sources. Centrarchids, sciaenids, ictalurids, cyprinids and esocids characterized this upper section of the river. Most of these species were tolerant of low dissolved oxygen concentrations and the high turbidity which prevailed there . The river near Port Robinson receives many industrial and domestic wastes as evidenced by the water quality data. The fish in this section were less abundant and the observed population was comprised almost solely of cyprinids. Further downstream, near Montrose, the Welland River received shock loads of chemical wastes that exceeded a specific conductance of ISiOOO ;umhos/cm. Few fish were captured at this site and those that were captured were considered to be transients. A review of the literature revealed that none of the common indices of water quality in use today could adequately predict the observed distributions. In addition to the above, the long-term trend (l3 yrs) of water quality of the lower Welland River revealed a gradual improvement. The major factor thought to be responsible for this improvement was the operation of the Welland Sewage Treatment Plant. The construction of the New Welland Ship Canal coincided with large fluctuations of the total solids and other parameters downstream. These conditions prevailed for a maximum of three years (1972- 1975)' Furthermore, spawning times and temperatures, geographic distributions, length-weight regressions and many other descriptive aspects of the ecology of some 26 species/ taxa of fish were obtained. Several of these species are rare or new to southern Ontario.