Factors affecting berry composition of Tempranillo grapevines before the arrest of phloem transport.

It is already known that berry ripening is determined by the leaf area/fruit ratio, as well as temperature and leaf physiology. The aim of this work was to assess the influence of these parameters on Tempranillo cultivar throughout stage III of berry development.

Measuring skin temperature before, during and after exercise: a comparison of thermocouples and infrared thermography

Measuring skin temperature (TSK) provides important information about the complex thermal control system and could be interesting when carrying out studies about thermoregulation. The most common method to record TSK involves thermocouples at specific locations; however, the use of infrared thermal imaging (IRT) has increased. The two methods use different physical processes to measure TSK, and each has advantages and disadvantages. Therefore, the objective of this study was to compare the mean skin temperature (MTSK) measurements using thermocouples and IRT in three different situations: pre-exercise, exercise and post-exercise. Analysis of the residual scores in Bland-Altman plots showed poor agreement between the MTSK obtained using thermocouples and those using IRT. The averaged error was -0.75 °C during pre-exercise, 1.22 °C during exercise and -1.16 °C during post-exercise, and the reliability between the methods was low in the pre- (ICC = 0.75 [0.12 to 0.93]), during (ICC = 0.49 [-0.80 to 0.85]) and post-exercise (ICC = 0.35 [-1.22 to 0.81] conditions. Thus, there is poor correlation between the values of MTSK measured by thermocouples and IRT pre-exercise, exercise and post-exercise, and low reliability between the two forms of measurement.

¿Es este un proyecto de Mies? / Is this a Mies s project?

Is this a Mies?s project? Disappearances, or the art of being a Mies project Angel Borrego Several years ago I had to solve the structure of Mies House of the Werkbund exhibition of 1931 as an exercise for a course named Structures Projects in the School of Architecture of Madrid. We were offered this house as an exercise because there had been some complaints about having to calculate and deal with ?bad, real, anonymous? architecture widely recognized as such, in so far as it has been widely published, that furthermore had some ideal quality to it, a quality reinforced by the fact that it was not there anymore, one could not go and see it, old and deteriorated, all images we have of it are of a shiny new object: in fact its ideal quality was even present in that it had not even been designed to be a completely real house, as nobody ever lived there and wasn?t supposed to. It was a three dimensional representation of a house, what gave it a further flair of ideality. And it was as well the representation of an idea, and we all liked that. Last but not least, it had Mies to back it up, which promised us the remote possibility of analyzing one of his works in depth, with proper tools (this was a structures course, and we had already read, or heard, something about the importance of structures in Mies?s work.) We were lured by the possibility of reconstructing, if not the pavilion, some of the ideas leading to it. Ideas that were themselves structural, like the ?perfectly regular all columnar structure?, an ideal structure. We had a sensation that we could somehow reproduce the process and thoughts of Mies leading to the solution of a particular work, investigate him in a cuasi archaeological manner, reconstruct the project, as if being able to reconstruct one work we could reconstruct the entire Mies, and placing ourselves in his position replace him, which was to know for once where we were (1). All these thoughts, passed through our minds more or less abstractly, believe it or not, before we realized that we were supposed to imagine that the roof was also supported by the walls and that the plan was lacking two columns, which was short. We could not believe that only to make the exercise more difficult, as it was admitted, the professors would mutilate a Mies work in such a way. The exercise had lost all interest to us and there were some timid protests. The surprise came when, though admitting that the supporting walls had been their idea, the professors said they had not manipulated the plan of the house at all. Some confusion followed, since that seemed quite incredible to us, even more to professors I guess. Two of us went to the library and checkout two books, one being the ?History of Modern Architecture? (the Benevolo as it was known), from where they said to have copied the plan of the house for the exercise, and another book on Mies that included the same project. The Benevolo was actually lacking the two columns, but the other book included them, making clear our point. We were able to reorient the exercise and calculate the house just as Mies had designed it. We, the students I mean, were really happy, since we had a voice in the discipline of architecture: our own discipline since we were the ones being disciplined, and we had been allowed to freely talk our way through it. I had the nice sensation that what happened was curiously and rewardingly similar to, or a kind of metaphor for, the flowing space of the free plan, that was allowed to move through the perfectly regular structure, a most disciplined structure. As Mark Wigley has noted, discipline is intimately related to prothesis. The concept of prothesis (pro-thesis) would be already architectural as ?the act of placing before?, referring to a structure that has to be placed before anything else; it is already a structure, rather than being something added that could be removed..

Energy and Lighting Performance of Buildings in the Neighbourhood Ciudad de los Angeles, Before and After Refurbishing.

The Spanish Ministry of Economy and Competitiveness is funding the SHERIF Research Project, which falls under the INNPACTO pr ogram. This project aims to increase the rate of the existing building refurbishment fro m the energy efficiency point of view by designing a facade system that must be an economica l, flexible and integrated solution 1 . Under this project has been performing several task s regarding the constructive characterization and energy evaluation of the therm al behaviour of facades on existing buildings . In order to perform the latter task, in which this article will focus, has been developing a survey of various buildings in the nei ghbourhood Ciudad de los Angeles, which has as main objective the comparison between the ac tual energy and light behaviour of different buildings, prior and posterior to any ref urbishment works have been undertaken. The evaluation of the actual performance of buildin gs before and after being refurbished is aimed to determine the impact of the work developed as well as learn from the work performed for future interventions.

Aplicación de la celulosa bacteriana a la restauración del patrimonio bibliográfico y documental en papel

La preservación del patrimonio bibliográfico y documental en papel es uno de los mayores retos a los que se enfrentan bibliotecas y archivos de todo el mundo. La búsqueda de soluciones al problema del papel degradado ha sido abordada históricamente desde dos líneas de trabajo predominantes: la conservación de estos documentos mediante la neutralización de los ácidos presentes en ellos con agentes alcalinos, y su restauración mediante el método de laminación fundamentalmente con papel de origen vegetal. Sin embargo, no se ha explorado con éxito la posibilidad de reforzar la celulosa dañada, y el problema sigue sin encontrar una solución satisfactoria. Hasta el día de hoy, el desarrollo de tratamientos basados en biotecnología en la conservación del patrimonio documental ha sido muy escaso, aunque la capacidad de ciertas bacterias de producir celulosa lleva a plantear su uso en el campo de la conservación y restauración del papel. La celulosa bacteriana (CB) es químicamente idéntica a la celulosa vegetal, pero su organización macroscópica es diferente. Sus propiedades únicas (alto grado de cristalinidad, durabilidad, resistencia y biocompatibilidad) han hecho de este material un excelente recurso en diferentes campos. En el desarrollo de esta tesis se ha estudiado el uso de la celulosa bacteriana, de alta calidad, generada por Gluconacetobacter sucrofermentans CECT 7291, para restaurar documentos deteriorados y consolidar los que puedan estar en peligro de degradación, evitando así su destrucción y proporcionando al papel que se restaura unas buenas propiedades mecánicas, ópticas y estructurales. Se desarrollan asimismo protocolos de trabajo que permitan la aplicación de dicha celulosa. En primer lugar se seleccionó el medio de cultivo que proporcionó una celulosa adecuada para su uso en restauración. Para ello se evaluó el efecto que tienen sobre la celulosa generada las fuentes de carbono y nitrógeno del medio de cultivo, manteniendo como parámetros fijos la temperatura y el pH inicial del medio, y efectuando los ensayos en condiciones estáticas. Se evaluó, también, el efecto que tiene en la CB la adición de un 1% de etanol al medio de cultivo. Las capas de celulosa se recolectaron a cuatro tiempos distintos, caracterizando en cada uno de ellos el medio de cultivo (pH y consumo de fuente de carbono), y las capas de CB (pH, peso seco y propiedades ópticas y mecánicas). La mejor combinación de fuentes de carbono y nitrógeno resultó ser fructosa más extracto de levadura y extracto de maíz, con o sin etanol, que proporcionaban una buena relación entre la producción de celulosa y el consumo de fuente de carbono, y que generaban una capa de celulosa resistente y homogénea. La adición de etanol al medio de cultivo, si bien aumentaba la productividad, causaba un descenso apreciable de pH. Las capas de CB obtenidas con los medios de cultivo optimizados se caracterizaron en términos de sus índices de desgarro y estallido, propiedades ópticas, microscopía electrónica de barrido (SEM), difracción de rayos-X, espectroscopía infrarroja con transformada de Fourier (FTIR), grado de polimerización, ángulos de contacto estáticos y dinámicos, y porosimetría de intrusión de mercurio. Por otro lado hay que tener en cuenta que el material restaurado debe ser estable con el tiempo. Por ello esta misma caracterización se efectuó tras someter a las capas de CB a un proceso de envejecimiento acelerado. Los resultados mostraron que la CB resultante tiene un elevado índice de cristalinidad, baja porosidad interna, buenas propiedades mecánicas, y alta estabilidad en el tiempo. Para desarrollar los protocolos de trabajo que permitan la restauración con esta celulosa optimizada, se comienzó con un proceso de selección de los papeles que van a ser restaurados. Se eligieron tres tipos de papeles modelo, hechos con pasta mecánica, química y filtro (antes y después de ser sometidos a un proceso de envejecimiento acelerado), y tres libros viejos adquiridos en el mercado de segunda mano. Estos ejemplares a restaurar se caracterizaron también en términos de sus propiedades mecánicas y fisicoquímicas. El primer protocolo de restauración con CB que se evaluó fue el denominado laminación. Consiste en aplicar un material de refuerzo al documento mediante el uso de un adhesivo. Se seleccionó para ello la CB producida en el medio de cultivo optimizado con un 1% de etanol. Se aplicó un método de purificación alcalino (1 hora a 90 °C en NaOH al 1%) y como adhesivo se seleccionó almidón de trigo. El proceso de laminación se efectuó también con papel japonés (PJ), un material habitualmente utilizado en conservación, para comparar ambos materiales. Se concluyó que no hay diferencias significativas en las características estudiadas entre los dos tipos de materiales de refuerzo. Se caracterizó el material reforzado y, también, después de sufrir un proceso de envejecimiento acelerado. Los papeles laminados con CB mostraban diferencias más marcadas en las propiedades ópticas que los restaurados con PJ, con respecto a los originales. Sin embargo, el texto era más legible cuando el material de restauración era la CB. La mojabilidad disminuía con ambos tipos de refuerzo, aunque en los papeles laminados con CB de manera más marcada e independiente del material a restaurar. Esto se debe a la estructura cerrada de la CB, que también conduce a una disminución en la permeabilidad al aire. Este estudio sugiere que la CB mejora la calidad del papel deteriorado, sin alterar la información que contiene, y que esta mejora se mantiene a lo largo del tiempo. Por tanto, la CB puede ser utilizada como material de refuerzo para laminar, pudiendo ser más adecuada que el PJ para ciertos tipos de papeles. El otro método de restauración que se estudió fue la generación in situ de la CB sobre el papel a restaurar. Para ello se seleccionó el medio de cultivo sin etanol, ya que el descenso de pH que causaba su presencia podría dañar el documento a restaurar. El método de purificación elegido fue un tratamiento térmico (24 horas a 65 °C), menos agresivo para el material a restaurar que el tratamiento alcalino. Se seleccionó la aplicación del medio de cultivo con la bacteria mediante pincel sobre el material a restaurar. Una vez caracterizado el material restaurado, y éste mismo tras sufrir un proceso de envejecimiento acelerado, se concluyó que no hay modificación apreciable en ninguna característica, salvo en la permeabilidad al aire, que disminuye de manera muy evidente con la generación de CB, dando lugar a un material prácticamente impermeable al aire. En general se puede concluir que ha quedado demostrada la capacidad que tiene la celulosa generada por la bacteria Gluconacetobacter sucrofermentans CECT 7291 para ser utilizada como material de refuerzo en la restauración del patrimonio documental en papel. Asimismo se han desarrollado dos métodos de aplicación, uno ex situ y otro in situ, para efectuar esta tarea de restauración. ABSTRACT The preservation of bibliographic and documentary heritage is one of the biggest challenges that libraries and archives around the world have to face. The search for solutions to the problem of degraded paper has historically been focused from two predominants lines of work: the conservation of these documents by the neutralization of acids in them with alkaline agents, and their restoration by lining them with, basically, cellulose from vegetal sources. However, the possibility of strengthening the damaged cellulose has not been successfully explored, and the problem still persists. Until today, the development of biotechnology-based treatments in documentary heritage conservation has been scarce, although the ability of certain bacteria to produce cellulose takes to propose its use in the field of conservation and restoration of paper. The bacterial cellulose (BC) is chemically identical to the plant cellulose, but its macroscopic organization is different. Its unique properties (high degree of crystallinity, durability, strength and biocompatibility), makes it an excellent resource in different fields. The use of high-quality BC generated by Gluconacetobacter sucrofermentans CECT 7291 to restore damaged documents and to consolidate those that may be at risk of degradation, has been studied in this thesis, trying to prevent the document destruction, and to get reinforced papers with good mechanical, optical and structural properties. Protocols that allow the implementation of the BC as a reinforcing material were also developed. First of all, in order to select the culture medium that provides a cellulose suitable for its use in restoration, it has been evaluated the effect that the carbon and nitrogen sources from the culture medium have on the generated BC, keeping the temperature and the initial pH of the medium as fixed parameters, and performing the culture without shaking. The effect of the addition of 1% ethanol to the culture medium on BC properties was also evaluated. The cellulose layers were collected at four different times, characterizing in all of them the culture medium (pH and carbon source consumption), and the BC sheets (pH, dry weight and optical and mechanical properties). The best combination of carbon and nitrogen sources proved to be fructose plus yeast extract and corn steep liquor, with or without ethanol, which provided a good balance between the cellulose production and the consumption of carbon source, and generating BC sheets homogeneous and resistant. The addition of ethanol to the culture medium increased productivity but caused a noticeable decrement in pH. The BC layers generated with these optimized culture media, have been characterized in terms of tear and burst index, optical properties, scanning electron microscopy (SEM), X-ray diffraction, infrared Fourier transform spectroscopy (FTIR), polymerization degree, static and dynamic contact angles, and mercury intrusion porosimetry. Moreover it must be kept in mind that the restored materials should be stable over time. Therefore, the same characterization was performed after subjecting the layers of BC to an accelerated aging process. The results showed that the BC sheets obtained have a high crystallinity index, low internal porosity, good mechanical properties, and high stability over time. To develop working protocols to use this optimized BC in paper restoration, the first step was to select the samples to restore. Three types of model papers, made from mechanical pulp, chemical pulp and filter paper (before and after an accelerated aging process), and three old books purchased in the second hand market, were chosen. These specimens to be restored were also characterized in terms of its mechanical and physicochemical properties. The first protocol of restoration with BC to be evaluated is called linning. It consists on applying a reinforcing material to the document using an adhesive. The BC produced in the optimized culture medium with 1% ethanol was selected. An alkali purification method (1 hour at 90 °C in 1% NaOH) was applied, and wheat starch was selected as adhesive. The linning process was also carried out with Japanese paper (JP), a material commonly used in conservation, in order to compare both materials. It was concluded that there are no significant differences in the characteristics studied of the two types of reinforcing materials. The reinforced materials were characterized before and after undergoing to an accelerated aging. Papers lined with BC showed more marked differences in the optical properties that papers restored with JP. However, the text was more readable when BC was the reinforcing material. Wettability decreased with both types of reinforcement, although in the papers linned with BC it happened more marked and independently of the sample to restore. This is due to the closed structure of BC, which also leads to a decrement in air permeance. This study suggests that BC improves the deteriorated paper quality, without altering the information on it, and that this improvement is maintained over time. Therefore, the BC may be used as reinforcing material for linning, being more suitable than the JP to restore certain types of papers. The other restoration method to be evaluated was the in situ generation of BC over the paper to restore. For this purpose the culture medium without ethanol was selected, as the pH decrement caused by his presence would damage the document to restore. As purification method a heat treatment (24 hours at 65 °C) was chosen, less aggressive to the material to restore than the alkaline treatment. It was decided to apply the culture medium with the bacteria onto the material to restore with a brush. The reinforced material was characterized before and after an accelerated aging process. It was concluded that there was no substantial change in any characteristic, except for air permeance, which decreases very sharply after the generation of BC, getting a substantially air impermeable material. In general, it can be concluded that the ability of BC produced by Gluconacetobacter sucrofermentans CECT 7291 for its use as a reinforcing material in the restoration of paper documentary heritage, has been demonstrated. Also, two restoration methods, one ex situ and another in situ have been developed.

La ciudad editada: de Las Vegas a Nueva York (1972-1978): Venturi / Scott Brown / Koolhaas

Si hubiese un denominador común entre todas las artes en lo que ha venido llamándose postmodernidad, éste tendría mucho que ver con el final del origen de la obra. Desde la literatura y la música hasta las artes plásticas y la arquitectura, la superación de la modernidad ha estado caracterizada por la sustitución del concepto de creación por el de intervención artística, o lo que es lo mismo, la interpretación de lo que ya existe. A principios del siglo XX los conceptos modernos de creación y origen implicaban tener que desaprender y olvidar todo lo anterior con el ánimo de partir desde cero; incluso en un sentido material Mies sugería la construcción literal de la materia y su movimiento de acuerdo a unas leyes. A partir de la segunda mitad de siglo los planteamientos historicistas empezaron a surgir como reacción ante la amnesia y la supuesta originalidad de los modernos. En este contexto surgen los libros Learning from Las Vegas, 1972 y Delirious New York, 1978, ambos deudores en muchos aspectos con el anterior libro de Venturi, Complexity and Contradiction in Architecture, 1966. Estos dos libros sobre ciudades, alejándose decididamente de las tendencias historicistas de la época, proponían utilizar el análisis crítico de la realidad existente como vehículo para la teoría y el proyecto de manera simultánea, convirtiéndose indirectamente en Manifiestos. Si en un primer momento Venturi, Rossi y otros planteaban acabar con los límites formales establecidos por la modernidad, así como por cualquiera de los cánones anteriores, tomando la totalidad de la obra construida como sistema de referencia, - al igual que hiciera Eliot en literatura, - los libros de Las Vegas y Nueva York sugerían directamente borrar los límites de la propia disciplina, llegando a poner en duda ¿Qué puede ser considerado arquitectura? Sin embargo, debido precisamente a la ausencia total de límites y a la inmensidad del sistema referencial planteado, “todo puede ser arquitectura”, como apuntaba Hans Hollein en 1968, los libros proponen al mismo tiempo definir el campo de actuación de cada cual de manera individual. Los escritos sobre Las Vegas y Nueva York suponen por un lado la eliminación de los limites disciplinares y por otro, la delimitación de ámbitos de trabajo concretos para sus autores: los propios de cada una de las ciudades interpretadas. La primera parte de la Tesis, Lecciones, se ocupa del necesario proceso de aprendizaje y experimentación previo a la acción crítica propiamente dicha. Los arquitectos contemporáneos necesitan acumular material, conocimiento, documentación, experiencias... antes de lanzarse a proponer mediante la crítica y la edición; y al contrario que ocurría con los modernos, cuanto más abundante sea ese bagaje previo más rica será la interpretación. Las ciudades de Roma, Londres y Berlín se entienden por tanto como experiencias capaces de proporcionar a Venturi, Scott Brown y Koolhaas respectivamente, sus “personales diccionarios”, unas interminables imaginerías con las que posteriormente se enfrentarían a los análisis de Las Vegas y Nueva York. La segunda parte, Críticas, se centra en la producción teórica en sí: los dos libros de ciudades analizados en estrecha relación con el Complexity and Contradiction. El razonamiento analógico característico de estos libros ha servido de guía metodológica para la investigación, estableciéndose relaciones, no entre los propios escritos directamente, sino a través de trabajos pertenecientes a otras disciplinas. En primer lugar se plantea un importante paralelismo entre los métodos de análisis desarrollados en estos libros y los utilizados por la crítica literaria, observando que si el new criticism y el nuevo periodismo sirvieron de guía en los escritos de Venturi y Scott Brown, la nouvelle critique y su propuesta de identificación poética fueron el claro referente de Koolhaas al abordar Nueva York. Por otro lado, la relevancia ganada por la actividad de comisariado artístico y la aparición de la figura del curator, como autoridad capaz de utilizar la obra de arte por encima de las intenciones de su propio autor, sirve, al igual que la figura del editor, como reflejo de la acción transformadora y de apropiación llevada a cabo tanto en Learning from Las Vegas, como en Delirious New York. Por último y a lo largo de toda la investigación las figuras de Bergson y Baudelaire han servido como apoyo teórico. A través de la utilización que de sus ideas hicieron Venturi y Koolhaas respectivamente, se ha tratado de mostrar la proximidad de ambos planteamientos desde un punto de vista ideológico. La Inclusión propuesta por Venturi y la ironía utilizada por Koolhaas, la contradicción y la paradoja, no son sino el reflejo de lógicas que en ambos casos reaccionan al mismo tiempo contra idealismo y materialismo, contra modernidad y antimodernidad, en un continuo intento de ser lo uno y lo otro simultáneamente. ABSTRACT If there was a common denominator among all the arts in what has been called postmodernism, it would have much to do with the end of the origin of the artwork. From literature and music to fine arts and architecture, overcoming modernity has been characterized by replacing the concept of artistic creation by the one of intervention, in other words, the interpretation of what already exists. In the early twentieth century modern concepts of creation and origin involved unlearning and forgetting everything before with the firm intention of starting from scratch. Even in a material sense Mies suggested the literal construction of matter and its motion according to laws. From the mid-century historicist approaches began to emerge in response to the amnesia and originality alleged by moderns. In this context appeared the books Learning from Las Vegas, 1972 and Delirious New York, 1978, both debtors in many respects to the previous book by Venturi, Complexity and Contradiction in Architecture, 1966. These two books on cities, which broke away decidedly with the historicist trends of the time, proposed using critical analysis of the existing reality as a vehicle for theory and projecting at the same time, indirectly becoming manifests. If at first Venturi, Rossi and others pose to erase the formal limits set by modernity, as well as any of the canons before, taking the entire work built as a reference system, - as did Eliot in literature - the books on Las Vegas and New York proposed directly erasing the boundaries of the discipline itself, coming to question what could be considered architecture? However, and precisely because of the absence of limits and the immensity of the established framework, - “everything could be architecture” as Hans Hollein pointed in 1968, - the books suggested at the same time the definition of a field of action for each one individually. The cities of Las Vegas and New York represented on the one hand the elimination of disciplinary limits and on the other, the delimitation of specific areas of work to its authors: Those on each of the cities interpreted. The first part of the thesis, Lessons, attend to the necessary process of learning and experimentation before the critical action itself. Contemporary architects need to accumulate material, knowledge, information, experiences... before proposing through criticism and editing; and unlike happened with moderns, the most abundant this prior baggage is, the richest will be the interpretation. Rome, London and Berlin are therefore understood as experiences capable of providing Venturi, Scott Brown and Koolhaas respectively, their “personal dictionaries”, interminable imageries with which they would later face the analysis of Las Vegas and New York. The second part, Critiques, focuses on the theoretical production itself: the two books on both cities analyzed closely with the Complexity and Contradiction. The analogical reasoning characteristic of these books has served as a methodological guide for the research, establishing relationships, not directly between the writings themselves, but through works belonging to other disciplines. First, an important parallel is set between the methods of analysis developed in these books and those used by literary criticism, noting that if the new criticism and new journalism guided Venturi and Scott Brown´s writings, the nouvelle critique and its poetic identification were clear references for Koolhaas when addressing New York. On the other hand, the relevance gained by curating and the understanding of the figure of the curator as an authority capable to use artworks above the intentions of their authors, like the one of the Editor, reflects the appropriation and processing actions carried out both in Learning from Las Vegas, and Delirious New York. Finally and over all the research Bergson and Baudelaire figures resonate continuously. Through the use of their ideas done by Venturi and Koolhaas respectively, the research has tried to show the proximity of both approaches from an ideological point of view. Inclusion, as posed by Venturi and irony, as used by Koolhaas, contradiction and paradox are reflections of the logic that in both cases allow them to react simultaneously against idealism and materialism, against modernism and anti-modernism.

Espacio web para el diseño de un museo virtual de la historia de la informática

El objetivo principal de crear un espacio web para el Museo Histórico de la Informática (MHI) perteneciente a la Escuela Técnica Superior de Ingenieros Informáticos (ETSIINF) de la Universidad Politécnica de Madrid (UPM) es la difusión de la historia de la informática entre el público en general. Si bien es cierto que existe ya una página web de consulta del MHI con algunas imágenes y contenido sobre los objetos que allí se exhiben, es también reseñable que se trata de un espacio obsoleto, lleno de carencias y extremadamente difícil de gestionar y actualizar, por lo que se hacía imprescindible actualizar el diseño del espacio web, los contenidos y el sistema de gestión de los mismos, cosa que es de gran interés para un lugar divulgativo. En la actualidad, existen maneras mucho más amigables para el usuario de navegar por una web; y de la misma manera para un administrador, gestionar el contenido de la misma y mantener a los usuarios bien informados de todo lo que se ofrece en cada momento. Esto es posible gracias a los sistemas de gestión de contenidos o content management system (CMS), de los que se hablará lo largo de todo el documento. Estos sistemas, dan una facilidad mucho mayor a los encargados de llevar al día una página web, sin tener que saber de programación, lenguajes o informática en general, ya que incorporan paneles de control muy intuitivos y fáciles de manejar, que son una ventaja tanto para ellos como para los usuarios. Es por esta razón que, hay páginas web como la de las empresas IKEA, Ubuntu o, en especial para el caso que compete al documento, el museo del Louvre usan gestores de contenidos para sus páginas web. Y es que las ventajas y facilidades que ofrece un CMS son realmente interesantes y se tratará de todas ellas en el documento, de la elección del CMS que mejor se ajusta a los requisitos del museo, las restricciones a la hora del despliegue en el ámbito de la ETSIINF y de cómo mejorará esto la calidad visual y divulgativa del MHI. Este trabajo se desarrolla a lo largo de 11 capítulos, en los que se muestra como construir un sitio web, las posibilidades y la elección final para este caso. En el primer capítulo se hace una pequeña introducción de lo que es el proyecto, se especifican los objetivos, la motivación del mismo y el alcance que tiene. En el segundo capítulo se muestra la información que se ha recopilado en el trabajo de investigación que se hace previo al desarrollo. En él se muestran los distintos tipos de páginas web, que tecnologías y lenguajes se pueden usar para su construcción, una comparativa sobre otras entidades similares al MHI, las limitaciones que presenta el entorno y la elección final que se consideró más adecuada para este caso. En el capítulo tres se empieza a desarrollar la solución a través del diseño. Aquí se puede encontrar el diseño de más bajo nivel que se le presenta al cliente para sentar las bases del trabajo, el diseño de alto nivel con un mayor grado de realidad que el anterior y una preparación de lo que serán los planes de prueba. El capítulo cuatro muestra todo lo que se ha usado en la implementación y la integración de la página web: herramientas, tecnologías, plantillas de diseño y módulos que proporcionan distintas funcionalidades. Llegados al capítulo cinco, se puede ver una detallada documentación de los resultados de las pruebas de usabilidad y accesibilidad realizadas, y las conclusiones que subyacen de estas. Una vez acabada la implementación del sitio web del MHI, en el capítulo seis se intenta hacer una labor de consultoría, mostrando precios y presupuestos de las distintas tareas que se han llevado a cabo para la realización de este proyecto. En el capítulo siete se extraen las conclusiones de todo lo acontecido en los capítulos anteriores y en el ocho unas líneas sobre posibles trabajos futuros que se podrían llevar a cabo en base a lo que ya se tiene en la institución, incluido este trabajo. Para facilitar la comprensión y satisfacer la curiosidad del lector, se ha incluido en el capítulo nueve la bibliografía con toda la documentación consultada y en el diez un glosario de términos para la aclaración de términos y acrónimos más técnicos. Para acabar, en el capítulo once se anexionan tanto el documento que se usó para las pruebas de usabilidad como un manual de administrador para el sitio web, que hace más amigable el entorno para las personas que lo tengan que mantener en un futuro.---ABSTRACT---The main goal of creating a website for the Informatics Historical Museum (“Museo Histórico de la Informática” or MHI) located in the Higher Technical School of Informatics Engineers (“Escuela Técnica Superior de Ingenieros Informáticos” or ETSIINF) of the Polytechnic University of Madrid (“Universidad Politécnica de Madrid” UPM), is to promote the aforementioned museum as to increase its reach to the public. While it is true that there already is a consulting website with some pictures and information about the items which are displayed in the building, it is outdated and the data is scarce. Moreover, it is extremely complicated to manage and to regularly update the web page, which is very important for informative/broadcasting media. Currently, there are easier ways for the users of a website to consult whatever information they want, as well as it is now easy for a website manager to display new content and to keep the users informed about what is been offered at every moment. This is possible because of content management systems (CMS), which will be discussed throughout the entire paper. These systems make it easier to use for the administrator of a website to keep it up to date without the necessity for them of having any knowledge or skills in programming, languages or computing, because the systems have an intuitive control panel that is easy to use, which is an advantage for both managers and users. Because of all these reasons, there are lots of companies that use this kind of systems, such as IKEA, Ubuntu or, especially, the Louvre Museum, to which we direct our attention all throughout this report. It is easy to notice that these systems have an important and very interesting number of perks and benefits. In the next chapters of the document we will explain the benefits of the program as well as the choice on the kind of CMS that best suits the requirements of the museum and, finally, the restrictions of the school for the deployment and of how all of this will improve the visual and informational qualities of the MHI. This work is developed over 11 chapters, shown how to build up a website, the possibilities and the final choice for this case. In the first chapter a brief introduction of the project, goals, motivation and scope thereof having specified are done. Before the development of the website, the second chapter shows de information of the researching work. It discusses the different types of websites, technologies and languages that can be used for build-up, a comparison of similar entities to MHI, the limitations of the environment and the final choice was considered more appropriate for this case. Chapter three begins to develop the design of the solution. Here there are the lowest level design that presents the customer to fix any problem, the high level design with a higher degree of reality than the last and the test plans. Chapter four shows everything that has been used in the implementation and integration of the website: tools, technologies, design templates and modules that provide different functionalities. Reaching the fifth chapter, you can see a detailed documentation of the results of the usability and accessibility tests made to some users and the conclusions of it. Once the implementation of MHI website is done, in chapter six there is a consultancy work, showing prices and budgets of the different tasks which were carried out for this project. In chapter seven there are the conclusions of what happened in the previous chapters and eight chapter shows possible future works that could be carried out based on what the institution already have, including this work. To make easier to the reader understand this paper and satisfy his curiosity, the chapter nine includes the bibliography consulted with all the documentation and chapter ten has a glossary of terms and an explanation of technical terms and acronyms. Finally, in chapter eleven there are attached both the document that was used for usability testing as a manual administrator for the website, making the environment friendlier for people who have to maintain it in the future.

El Prado, de territorio a escenario : la construcción del espacio en un lugar tangible y su significado

"Si el hombre es el cuidador de las palabras y sólo de ellas emerge el sentido de las cosas, la arquitectura tiene un cometido preciso: hacer de las condiciones ya dadas de cada lugar palabras que signifiquen las cualidades de la existencia, y que desvelen la riqueza y contenidos que en ellas se contienen potencialmente" Ignasi Solá Morales. Lugar: permanencia o producción, 1992. Esta tesis surge tanto del afán por comprender la identidad de uno de los espacios más representativos de mi ciudad, asumido familiarmente pero que plantea muchas dudas respecto a su caracterización, como de la preocupación personal respecto a la aparente hegemonía del modelo urbano de la "ciudad genérica", crudamente expuesto por Rem Koolhaas a finales del siglo XX, que pone en crisis la ciudad histórica. El territorio, espacio físico concreto, y la memoria asociada a este, obliterados, son considerados como punto de partida para confrontarlos con la proclamación del nuevo modelo de "ciudad genérica", de raíz eminentemente económica y tecnológica. La realidad tangible de un espacio, aparentemente forjado en base a los valores denostados por el nuevo modelo propuesto, se estudia desde las premisas opuestas. La idea del no-lugar, teorizado por Marc Augé y tomado como modelo por Koolhaas, supone éste emancipado tanto de las preexistencias históricas como de su ubicación física concreta, planteando un tipo de espacio de representación al margen del territorio y la memoria. Sin pretender adoptar una postura resistente u opuesta, sino antitética y complementaria, se toman aquí las premisas de Koolhaas para contrastarlas con una porción del territorio a medio camino entre la arquitectura y la ciudad, a fin de desarrollar una reflexión que sirva de complemento y contrapeso al paradigma espacial que la “ciudad genérica” implica y cuya inmediatez y supuesta anomia parecen anular cualquier intención interpretativa al neutralizar los centros históricos y proclamar el agotamiento de la historia. El planteamiento de una teoría dicotómica frente al espacio y las teorías arquitectónicas asociadas a este ya fue formulado por Colin Rowe y Fred Koetter a finales de los años setenta del siglo pasado. Se plantea aquí la idea de una “ciudad tangible” como opuesta a la idea de la "ciudad genérica" enunciada por Koolhaas. Tomando el territorio y la memoria como referencia principal en un lugar concreto y huyendo de la premisa de la inmediatez del instante y el "presente perpetuo" proclamado por Koolhaas, del que según él seríamos prisioneros, se establece una distancia respecto al objeto de análisis que desarrolla el estudio en la dirección opuesta al supuesto origen del mismo, planteando la posibilidad de reactivar una reflexión en torno al territorio y la memoria en el seno del proceso global de habitación para poner de manifiesto determinados mecanismos de configuración de un espacio de representación al margen de la urgencia del presente, reactivando la memoria y su relación con el territorio como punto de partida. Desde de la reconstrucción hipotética del territorio, partiendo de la propia presencia física del mismo, su orografía, la paleo-biología, las analogías etológicas, los restos arqueológicos, la antropología o la historia, se reivindica la reflexión arquitectónica como disciplina diversa y privilegiada en cuanto al análisis espacial, tratando de discernir el proceso mediante el cual el Prado pasó de territorio a escenario. La organización cronológica del estudio y la incorporación de muy diversas fuentes, en su mayoría directas, pretende poner de manifiesto la condición transitiva del espacio de representación y contrastar el pasado remoto del lugar y su construcción con el momento actual, inevitablemente encarnado por el punto de vista desde el cual se desarrolla la tesis. El Prado parece albergar, agazapado en su nombre, la raíz de un origen remoto y olvidado. Si como enunciaba Ignasi Solá-Morales la función de la arquitectura es hacer aflorar los significados inherentes al lugar, esta tesis se plantea como una recuperación de la idea del vínculo entre el territorio y la memoria como fuente fundamental en la definición de un espacio de representación específico. El escrutinio del pasado constituye un acto eminentemente contemporáneo, pues el punto de vista y la distancia, inevitablemente condicionados por el presente, determinan la mirada. El culto contemporáneo a la inmediatez y la proclamación de la superación de los procesos históricos han relegado el pasado, en cierto grado, a depósito de restos o referente a superar, obviando su ineluctable condición de origen o momento anterior condicionante. Partiendo de la reconstrucción del lugar sobre el cual se halla el Prado ubicado y reconsiderando, según las premisas desarrolladas por la moderna historiografía, fundamentalmente desarrolladas por la Escuela francesa de los Annales, la cotidianeidad y lo anónimo como fuente de la que dimanan muchos de los actuales significados de nuestros espacios de representación, tomando como punto de partida un lugar remoto y olvidado, se estudia como se fue consolidando el Prado hasta devenir un lugar insigne de referencia asociado a los poderes fácticos y el espacio áulico de la capital de las Españas en el siglo XVII. El proceso mediante el cual el Prado pasó de territorio a escenario implica la recuperación de la memoria de un espacio agropecuario anónimo y el análisis de cómo, poco a poco, se fue depositando sobre el mismo el acervo de los diversos pobladores de la región que con sus particularidades culturales y sociales fueron condicionando, en mayor o menor grado, un lugar cuyo origen se extiende retrospectivamente hasta hace más de dos mil años, cuando se considera que pudo darse la primera habitación a partir de la cual, de manera ininterrumpida, el Prado ha venido siendo parte de lo que devino, más tarde, Madrid. La llegada de nuevos agentes, vinculados con estructuras de poder y territoriales que trascendían la inmediatez del territorio sobre el que se comenzó a erigir dicho lugar, sirven para repasar los diferentes depósitos ideológicos y culturales que han ido conformando el mismo, reivindicando la diversidad y lo heterogéneo del espacio de representación frente a la idea homogeneizadora que el modelo genérico implica. La constitución del Prado como un espacio de referencia asociado al paganismo arcaico a partir de la praxis espacial cotidiana, su relación con las estructuras defensivas de Al-Andalus y la atalaya Omeya, la apropiación del los primitivos santuarios por parte la iglesia, su relación con un determinado tipo de espiritualidad y las órdenes religiosas más poderosas de la época, la preferencia de Carlos V por Madrid y sus vínculos con la cultura europea del momento, o la definitiva metamorfosis del lugar a partir del siglo XVI y el advenimiento de un nuevo paganismo emblemático y estetizado, culminan con el advenimiento de lo económico como representación del poder en el seno de la corte y la erección del Palacio del Buen Retiro como manifestación tangible de la definitiva exaltación del Prado a espacio de representación áulico. Decía T.S. Elliot que la pugna por el espacio de la memoria constituye el principal rasgo del clasicismo, y el Prado, ciertamente, participa de ese carácter al que está profundamente asociado en la conciencia espacial de los madrileños como lugar de referencia. Acaso la obliteración del territorio y la memoria, propuestas en la “ciudad genérica” también tengan algo que ver con ello. ABSTRACT "If man is the caretaker of words and only they provide the sense of things, the architecture has a precise mission: to make out from the given conditions of each place words that mean the qualities of existence, and which unveil the wealth and content they potentially contain " Ignasi Solá Morales. Place: permanence or production, 1992. This thesis arises from both the desire to understand the identity of one of the most representative spaces of my city, assumed in a familiar way but that raises many doubts about its characterization, and from a personal concern about the apparent hegemony of the urban model of the "generic city " so crudely exposed by Rem Koolhaas in the late twentieth century that puts a strain on the historic city. The obliteration of the territory, specific physical space, and its associated memory, are considered as a starting point to confront them with the proclamation of the new model of "generic city" raised from eminently economic and technological roots. The tangible reality of a space, apparently forged based on the values reviled by the proposed new model, is studied from opposite premises. The idea of non-place, theorized by Marc Augé and modeled by Koolhaas, implies the emancipation from both historical preexistences and physical location, posing a type of space representation outside the territory and memory. Without wishing to establish a confrontational or opposite position, but an antithetical and complementary stance, the premises of Koolhaas are here taken to contrast them with a portion of territory halfway between architecture and the city, to develop a study that will complement and counterbalance the spatial paradigm that the "generic city" means and whose alleged immediacy and anomie appear to nullify any interpretative intention by neutralizing the historic centers and proclaiming the exhaustion of history. The approach of a dichotomous theory versus space and architectural theories associated with this were already formulated by Colin Rowe and Fred Koetter during the late seventies of last century. The idea of a "tangible city" as opposed to the idea of the "generic city" enunciated by Koolhaas arises here. Taking the territory and memory as the main reference in a particular place and trying to avoid the premise of the immediacy of the moment and the "perpetual present" proclaimed by Koolhaas, of which he pleas we would be prisoners, a distance is established from the object of analysis developing the study in the opposite direction to the alleged origin of it, raising the possibility of reactivating a reflection on the territory and memory within the overall process of inhabiting to reveal certain representational space configuration mechanisms outside the urgency of the present, reviving the memory and its relationship with the territory as a starting point. From the hypothetical reconstruction of the territory, starting from its physical presence, geography, paleo-biology, ethological analogies, archaeological remains, anthropology or history, architecture is claimed as a diverse as privileged discipline for spatial analysis, trying to discern the process by which the Prado moved from territory to stage. The chronological organization of the study and incorporating a variety of sources, most direct, aims to highlight the transitive condition of representational space and contrast the remote past of the place and its construction with the current moment, inevitably played by the view point from which the thesis develops. The Prado seems to harbor, in its name, the root of a remote and forgotten origin. If, as Ignasi Sola-Morales said, the aim of architecture is to bring out the meanings inherent in the site, this thesis is presented as a recovery of the idea of the link between the territory and memory as a key source in defining a specific space of representation. The scrutiny of the past is an eminently contemporary act, for the view and distance inevitably conditioned by the present, determine the way we look. The contemporary cult of immediacy and the proclamation of overcoming historical processes have relegated the past, to some extent, to remains deposit or a reference to overcome, ignoring its ineluctable condition as origin or previous constraint. From rebuilding the site on which the Prado is located and reconsidering everyday life and the anonymous as a source of many arising current meanings of our space of representation, according to the premises developed by modern historiography mainly developed by the French school of Annales, trying to recover the remote and forgotten is attempted, the thesis studies how el Prado was consolidated to become the most significant place of Madrid, deeply associated with the power in the capital of Spain during the XVII century. The process by which the Prado evolved from territory to stage involves the recovery of the memory of an anonymous agricultural space and the analysis of how, little by little, the influence of the various inhabitants of the region with their own and how their cultural and social peculiarities was deposited through time on the common ground and how that determined, to a greater or lesser degree, a place whose origin retrospectively extends over more than two thousand years ago, when we can consider the first inhabiting from which, without interruption, the Prado has come to be part of what became, later, Madrid. The arrival of new players, linked to power structures and territorial issues which transcended the immediacy of the territory on which the place begun to be a characteristic space, serve to review the different ideological and cultural deposits that have shaped the place, claiming diversity and heterogeneous space of representation before the homogenizing idea which the generic model implies. The constitution of the Prado as a benchmark associated with the archaic paganism developed from the ancient everyday spatial praxis, its relationship with the defensive structures of Al-Andalus and the Umayyad watchtower, the appropriation of the early sanctuaries by the roman church, its relationship with a certain type of spirituality and the most powerful religious orders of the time, the preference of Carlos V towards Madrid and its links with the European culture of the moment and the final metamorphosis of the place during the sixteenth century, end at the moment on which the advent of the economic as a representation of power within the court and the erection of the Palacio del Buen Retiro, as a tangible manifestation of the ultimate exaltation of courtly Prado space representation, happened in the mid XVII century. T. S. Elliot said that the struggle for memory space is the main feature of classicism, and the Prado certainly shares part of that character deeply associated in the mental spatial structure of the locals as a landmark. Perhaps the obliteration of territory and memory proposed in the "generic city" might also have something to do with that.

Trans arquitectura : imaginación, invención e individuación del objeto técnico arquitectónico : transferencia tecnológica desde la industria del transporte al proyecto arquitectónico (1900-1973)

Se presenta la tesis doctoral, titulada ‘TRANS Arquitectura. Imaginación, Invención e individuación del objeto tecnico arquitectónico. Transferencia tecnológica desde la Industria del Transporte al Proyecto de Arquitectura [1900-1973]'’, que aborda la relación entre la Arquitectura y el Objeto Técnico durante la Modernidad.1 La temática de la tesis gravita en torno a la cultura técnica, la cultura material y la historia de la Tecnología del siglo XX. Hipótesis Se sostiene aquí la existencia de unas arquitecturas que se definen como Objetos Técnicos. Para demostrarlo se estudia si éstas comparten las mismas propiedades ontológicas de los objetos técnicos. Industria y Arquitectura La historia de la Arquitectura Moderna es la historia de la Industria Moderna y sus instalaciones industriales, sus productos y artefactos o sus procedimientos y procesos productivos. Fábricas, talleres, acerías, astilleros, minas, refinerías, laboratorios, automóviles, veleros, aviones, dirigibles, transbordadores, estaciones espaciales, electrodomésticos, ordenadores personales, teléfonos móviles, motores, baterías, turbinas, aparejos, cascos, chassis, carrocerías, fuselajes, composites, materiales sintéticos, la cadena de montaje, la fabricación modular, la cadena de suministros, la ingeniería de procesos, la obsolescencia programada… Todos estos objetos técnicos evolucionan constantemente gracias al inconformismo de la imaginación humana, y como intermediarios que son, cambian nuestra manera de relacionarnos con el mundo. La Arquitectura, al igual que otros objetos técnicos, media entre el hombre y el mundo. Con el objetivo de reducir el ámbito tan vasto de la investigación, éste se ha filtrado a partir de varios parámetros y cualidades de la Industria, estableciendo un marco temporal, vinculado con un determinado modo de hacer, basado en la ciencia. El inicio del desarrollo industrial basado en el conocimiento científico se da desde la Segunda Revolución Industrial, por consenso en el último tercio del siglo XIX. Este marco centra el foco de la tesis en el proceso de industrialización experimentado por la Arquitectura desde entonces, y durante aproximadamente un siglo, recorriendo la Modernidad durante los 75 primeros años del siglo XX. Durante este tiempo, los arquitectos han realizado transferencias de imágenes, técnicas, procesos y materiales desde la Industria, que ha servido como fuente de conocimiento para la Arquitectura, y ha evolucionado como disciplina. Para poder abordar más razonablemente un periodo tan amplio, se ha elegido el sector industrial del transporte, que históricamente ha sido, no sólo fuente de inspiración para los Arquitectos, sino también fuente de transferencia tecnológica para la Arquitectura. Conjuntos técnicos como los astilleros, fábricas de automóviles o hangares de aviones, individuos técnicos como barcos, coches o aviones, y elementos técnicos como las estructuras que les dan forma y soporte, son todos ellos objetos técnicos que comparten propiedades con las arquitecturas que aquí se presentan. La puesta en marcha de la cadena móvil de montaje en 1913, se toma instrumentalmente como primer foco temporal desde el que relatar la evolución de numerosos objetos técnicos en la Primera Era de la Máquina; un segundo foco se sitúa en 19582, año de la creación de la Agencia Espacial norteamericana (NASA), que sirve de referencia para situar la Segunda Era de la Máquina. La mayoría de los objetos técnicos arquitectónicos utilizados para probar la hipótesis planteada, gravitan en torno a estas fechas, con un rango de más menos 25 años, con una clara intención de sincronizar el tiempo de la acción y el tiempo del pensamiento. Arquitectura y objeto técnico Los objetos técnicos han estado siempre relacionados con la Arquitectura. En el pasado, el mismo técnico que proyectaba y supervisaba una estructura, se ocupaba de inventar los ingenios y máquinas para llevarlas a cabo. Los maestros de obra, eran verdaderos ‘agentes de transferencia tecnológica’ de la Industria y su conocimiento relacionaba técnicas de fabricación de diferentes objetos técnicos. Brunelleschi inventó varia grúas para construir la cúpula de Santa Maria dei Fiori (ca.1461), seguramente inspirado por la reedición del tratado de Vitruvio, De Architectura (15 A.C.), cuyo último capítulo estaba dedicado a las máquinas de la arquitectura clásica romana, y citaba a inventores como Archimedes. El arquitecto florentino fue el primero en patentar un invento en 1421: una embarcación anfibia que serviría para transportar mármol de Carrara por el río Arno, para su obra en Florencia. J. Paxton. Crystal Palace. London 1851. Viga-columna. Robert McCormick. Cosechadora 1831. 2ª patente, 1845. La Segunda Revolución Industrial nos dejó un primitivo ejemplo moderno de la relación entre la Arquitectura y el objeto técnico. El mayor edificio industrializado hasta la fecha, el Crystal Palace de Londres, obra de Joseph Paxton, fue montado en Londres con motivo de la Gran Exposición sobre la Industria Mundial de 1851, y siempre estará asociado a la cosechadora McCormick, merecedora del Gran Premio del Jurado. De ambos objetos técnicos, podrían destacarse características similares, como su origen industrial, y ser el complejo resultado de un ensamblaje simple de elementos técnicos. Desde la entonces, el desarrollo tecnológico ha experimentado una aceleración continuada, dando lugar a una creciente especialización y separación del conocimiento sobre las técnicas antes naturalmente unidas. Este proceso se ha dado a expensas del conocimiento integrador y en detrimento de la promiscuidad entre la Industria y la Arquitectura. Este es, sin lugar a dudas, un signo consustancial a nuestro tiempo, que provoca un natural interés de los arquitectos y otros tecnólogos, por las transferencias, trans e inter-disciplinareidades que tratan de re-establecer los canales de relación entre los diferentes campos del conocimiento. La emergencia de objetos técnicos como los vehículos modernos a principios del siglo XX (el automóvil, el trasatlántico, el dirigible o el aeroplano) está relacionada directamente con la Arquitectura de la Primera Era de la Máquina. La fascinación de los arquitectos modernos por aquellas nuevas estructuras habitables, se ha mantenido durante más de un siglo, con diferente intensidad y prestando atención a unos objetos técnicos u otros, oscilando entre el dominio del valor simbólico de los vehículos como objetosimágenes, durante el periodo heroico de la Primera Era de la Máquina, y la mirada más inquisitiva durante la Segunda, que perseguía un conocimiento más profundo de la organización de los mismos y del sistema técnico en el que estaban incluidos. La relación homóloga que existe entre arquitecturas y vehículos, por su condición de estructuras habitables, es algo de sobra conocido desde que Le Corbusier utilizara aquellas imágenes de barcos, coches y aviones para ilustrar su manifiesto Vers une architecture, de 1923. Los vehículos modernos han sido los medios con los que transmitir los conceptos que ansiaban transformar las propiedades tradicionales de la Arquitectura, relativas a su factura, su habitabilidad, su duración, su funcionalidad o su estética. Destaca particularmente el caso del automóvil en las décadas de los años 30 y 50, y los vehículos del programa espacial en las décadas de los 60 y 70. El conocimiento y la documentación previa de estos hechos, fueron un buen indicio para identificar y confirmar que el sector industrial del transporte, era un especialmente trascendente y fértil proveedor de casos de transferencia tecnológica para la Arquitectura. La tradición Moderna inaugurada por Le Corbusier en los años 20, ha sido mantenida y defendida por una multitud de arquitectos modernos como Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames o Craig Ellwood, cuyo trabajo, animado por el legado de anteriores tecnólogos como Bucky Fuller o Jean Prouvé, fue fundamental y referencia obligada para la siguiente generación de arquitectos como Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean Kaplicky o Richard Horden, entre otros. Todos ellos han contribuido a engrosar el imaginario del objeto técnico, aportando sus obras arquitectónicas. Estos arquitectos que aparecen repetidamente en el discurrir de la tesis, pertenecen a un mismo linaje, y son agrupados según una estructura ‘genealógica’, que se ha denominado ‘Estirpe Técnica’. Unidos por intereses comunes y similares enfoques o actitudes ante el proyecto de arquitectura, entendida como objeto Técnico, han operado mediante la práctica de la transferencia tecnológica, sin limitarse a las técnicas compositivas propias de la disciplina arquitectónica. Durante la investigación, se ha recopilado una selección de menciones explícitas -hechas por arquitectos- sobre otros objetos técnicos para referirse a la Arquitectura, mostrando las constantes y las variaciones de sus intereses a lo largo del siglo, lo que nos ha llevado a conclusiones como por ejemplo, que los conjuntos técnicos (fábricas de zepelines, aviones, automóviles o trasatlánticos) eran tomados por los arquitectos de la primera Modernidad, como un modelo imaginario, formal y compositivo, mientras que los de la Segunda Era de la Máquina los tomaban como modelo espacial y organizativo para la arquitectura. La mencionada estirpe de tecnólogos incluye líneas de descendencia conocidas, como: EiffelSuchovBehrens GropiusMiesLeCorbusierLodsProuve, en la Europa continental, o una rama británica como: LoudonPaxtonWilliamsStirlingGowan SmithsonsPriceArchigramFosterRogersPiano KaplickyHorden. También podemos encontrar conexiones intercontinentales como Fuller EamesRudolphFosterRogers, o ramificaciones menos previsibles como: LeRicolaisKahn PianoKaplicky, o LeCorbusierFreyLacaton Vassal… Seguramente muchos más merecerían incluirse en esta lista, y de hecho, la tesis asume la imposibilidad de incluirlo todo (por motivos prácticos) aunque contempla la posibilidad de ser ampliada en un futuro. Con lo aquí incluido, se pretende mostrar la continuidad en los enfoques, planteamientos y técnicas de proyectos aplicadas, de los que podemos deducir algunas conclusiones, como por ejemplo, que en los periodos inmediatamente posteriores a las dos Guerras Mundiales, aumentó la intensidad de aportaciones de nuevas imágenes de vehículos, al imaginario del objeto técnico utilizado por los arquitectos, a través de publicaciones y exposiciones. Hoy, cien años después de que Ford pusiera en marcha la cadena móvil de montaje, aún encontramos viva esta tradición en las palabras de un arquitecto, Richard Horden, cuyo trabajo porta consigo –como la información embebida en los elementos técnicos- toda una cultura técnica de una tradición moderna. Horden representa uno de los exponentes de la que he denominado estirpe de tecnólogos. Es por ello que he querido concluir la tesis con una entrevista, realizada en Mayo de 2015, en su estudio de Berkeley Square en Londres (ver Apéndices). Guías Para el desarrollo de la presente tesis, se ha tomado, como principal obra de referencia, otra tesis, titulada El modo de existencia de los objetos técnicos, leída y publicada en 1958 por el filósofo francés Gilbert Simondon [1924-89], dedicada a la ontología del objeto técnico. Esta obra enmarca el enfoque intelectual de la tesis, que entronca con la fenomenología, para movilizar una visión particular de la Arquitectura, a la que sirve como modelo de análisis ontológico para estudiar sus procesos de génesis, invención e individuación. Para el desarrollo de éstos, se ha utilizado como complemento bibliográfico, otra obra del mismo autor, titulada Imaginación e invención 1965-66. En cuanto a las fuentes historiográficas disciplinares, se ha elegido utilizar a Reyner P. Banham [1922-1988] y a Martin E. Pawley [1938-2008] como guías a través de la arquitectura del siglo XX. Sus crónicas sobre la Primera y Segunda Era de la Máquina3 y su obra crítica, han servido como índices desde los que reconstruir el imaginario del objeto técnico moderno, y del que aprovisionarse de proyectos y obras de Arquitectura como casos de estudio para la tesis. Estas obras han servido además como índices de otra bibliografía, que ha sido complementaria a la de éstos. Objetivos de la Tesis El principal objetivo de la tesis es demostrar la hipótesis: si una obra de arquitectura puede ser considerada un objeto técnico y bajo qué condiciones, construyendo un criterio que permita reconocer cuándo una obra de Arquitectura responde a la definición de objeto técnico. Otro objetivo es demostrar la importancia y potencia de la Transferencia tecnológica en el proceso evolutivo de la Arquitectura, y para ello se presentan ejemplos de una metodología de proyecto por ensamblaje, que Martin Pawley denominaba ‘Design by Assembly’. También es un objetivo el de reconstruir un Atlas del Imaginario del objeto técnico moderno, con el fin de conocer mejor las causas, razones y finalidades que llevaron a los arquitectos modernos a perseguir una arquitectura como objeto técnico. Este Atlas permite relacionar panópticamente los distintos objetos técnicos entre sí, revelando la verdadera importancia y trascendencia de aquéllos y las arquitecturas con las que se relacionan. En él, las arquitecturas vuelven a situarse en el contexto más extenso y complejo de la industria y la historia de la tecnología, al que siempre pertenecieron. De este modo, éstas son capaces de desvelar todo el conocimiento -en forma de información- que portan en su propio código ‘genético’, desplegando capítulos completos de cultura tecnológica, tan antigua como la Humanidad y en constante y creciente evolución. Estructura de la tesis Tras una Introducción en la que se presentan algunos de los conceptos principales que se instrumentalizan en la tesis sobre la ontología Simondoniana del objeto técnico y sobre la transferencia tecnológica aplicada al proyecto de Arquitectura, el texto principal de la tesis consta de tres partes: La primera se dedica a la Imaginación, una segunda parte a la Invención y una tercera a Individuación o evolución del objeto técnico. Se termina con una Discusión de la tesis y un apartado de Conclusiones. En la Introducción al objeto técnico, éste se define ontológicamente y se distinguen sus diferentes categorías (conjuntos técnicos, individuos técnicos y elementos técnicos). Se explica el proceso de génesis del objeto técnico y sus fases de imaginación, invención e individuación. También se presentan los conceptos de transducción, tecnicidad y sistema técnico, fundamentales para entender el concepto de transferencia tecnológica que se desarrollará después. La concretización, explica el modo particular de individuación y evolución de los objetos técnicos, un proceso por el que las diferentes partes de un objeto técnico, se integran y tienden hacia la propia convergencia. Aquí se comprueba la efectividad del concepto simondoniano de Transducción, como señal o información transmitida y transformada, y se relaciona con la Transferencia Tecnológica - un proceso sinergético, por el que un sector industrial se beneficia del desarrollo de otro sector- a la que se han referido explícitamente arquitectos e historiadores para explicar sus obras, durante la Segunda Era de la Máquina, y que es determinante para el desarrollo de la Industria. La transferencia tecnológica sería la transmisión del conjunto de conocimientos sobre la técnica, que incluyen su esfera fáctica, pero también la esfera sensible de la experiencia. En su aplicación a la arquitectura, las transferencias se han clasificado según tres tipos: Eidéticas, Tectónicas, Orgánicas. En la primera parte dedicada a la Imaginación del objeto técnico arquitectónico se realiza una reconstrucción ‘arqueológica’ –y parcial- del imaginario del objeto técnico moderno, con la intención de conocer mejor su génesis y la relación con otros objetos técnicos. Las fuentes de ese imaginario se buscan en las instalaciones de la Industria de principios de siglo XX, en particular en las fábricas de vehículos, con la finalidad de comprobar hasta qué punto, esos objetos técnicos fueron importantes para imaginar la Arquitectura moderna. La reconstrucción se continúa hasta la Segunda Era de la Máquina, cuando una nueva mirada más inquisitiva y precisa, se dirige a otras fábricas, vehículos y componentes, interesándose por sus cualidades materiales y organizativas. Transferencias Eidéticas, que operan desde un conocimiento intuitivo y son útiles para transmitir información sobre la esencia de un objeto técnico que sirve de fuente. Conceptos abstractos se transmiten por medio de las imágenes—objeto, para producir una transformación en su equivalente arquitectónico. Fruto de la investigación, se han detectado un grupo de conceptos que han sido objeto de transferencias tecnológicas de naturaleza eidética, provenientes del imaginario del objeto técnico moderno: FABRICADO, HABITABLE, FUNCIONAL, EFICIENTE, OBSOLESCENTE y BELLO. En la segunda parte dedicada a la Invención del objeto técnico arquitectónico, las transferencias también pueden ser Tectónicas, cuando lo que se transmite es una técnica constructiva o estructural aplicada mediante MATERIALES artificiales (como los metales, los composites como el ferrocemento, y el plywood, o las aleaciones como el aluminio) o mediante el ensamblaje de ESTRUCTURAS o partes componentes de otro objeto técnico, (como cascos, fuselajes, carrocerías o aparejos) y tiene como resultado la invención de un nuevo objeto técnico arquitectónico. En la tercera parte dedicada a la individuación, se abordan las transferencias ORGÁNICAS, lo que se transfiere es una técnica organizativa, aplicada a través de PROCEDIMIENTOS que definen la actividad del arquitecto como tecnólogo e inventor de objetos técnicos. Estos procedimientos tienen un efecto transformador en tres instituciones tradicionales para la Arquitectura: la Escuela, el Estudio y la Obra, y sus resultados se resumen en nuevos modelos de organización de la Educación de la Arquitectura, con la aparición de los Talleres de proyectos; nuevos modelos de organización del ejercicio de arquitecto: la Oficina técnica; nuevos modelos de organización del espacio, basados en la organización espacial de la Industria, que da lugar a patrones o Matrices espaciales; un nuevo modelo de organización del proyecto, que utiliza las herramientas gráficas de la industria y el ensamblaje como metodología; y un nuevo modelo de producción arquitectónica, basado en la Industrialización. Tras explicar los conceptos y la génesis del ensamblaje y el montaje, se presenta el proyecto por ensamblaje (Design by assembly) como un método que promueve la invención arquitectónica. Se demuestra utilizando algunos casos analizados en la tesis, en los que se ha realizado alguna transferencia conceptual, constructiva u organizativa. Tras analizar las arquitecturas estudiadas en la tesis, se ha utilizado el método genético propuesto por Simondon para comprender cada evolución particular, reconstruyendo las líneas genealógicas hasta sus ancestros, e identificando una serie de linajes genéticos, que corresponderían con los conjuntos técnicos estudiados en la tesis: el astillero, la fábrica de coches, y la fábrica de aeronaves: los Ancestros de la Modernidad. Los sistemas de organización espacial de estos conjuntos técnicos, están directamente relacionados con el objeto técnico que se produce en él. A partir de ellos se definen una serie de matrices operativas (MILL, SHOP, SHED), que sirven para hacer una taxonomía del objeto técnico arquitectónico. Esto se ejemplifica con algunos proyectos de Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean Kaplicky y Richard Horden. Tesis: Comprobación de la hipótesis Simondon definía ontológicamente el Objeto técnico como aquello de lo que existe génesis y que desarrolla una tendencia hacia la solidaridad y unidad. Para que una Arquitectura pueda ser reconocida como un Objeto técnico, se deben dar una serie de condiciones, en las sucesivas fases que intervienen en su modo de existencia: Imaginación. Estas arquitecturas remiten a un imaginario protagonizado por imágenes-objeto de otros objetos técnicos (conjuntos técnicos, individuos técnicos y elementos técnicos). Esas imágenes-objeto vehiculizan una transferencia eidética de los objetos técnicos que simbolizan. Invención. Estas arquitecturas son el resultado de transferencias tectónicas, que se producen durante el proceso de proyecto, mediante el ensamblaje de materiales, componentes o procedimientos, utilizados en la industria para la producción de otros objetos técnicos. Individuación. Estas arquitecturas evolucionan y se individualizan por concretización, un proceso por el que los objetos técnicos se organizan para seguir su tendencia hacia la integración de sus partes, con el fin de alcanzar la convergencia de funciones en una única estructura. Esta integración tiende hacia la naturalización del objeto técnico, mediante la inclusión simbiótica de sus medios naturales asociados. En este caso, veremos cómo se ha producido transferencias orgánicas, o lo que es lo mismo, cómo los objetos técnicos –en el nivel de los conjuntos técnicos- se han tomado como modelo de organización por la arquitectura. Tras comprobar que de ellas existe una génesis, que evoluciona por las fases de imaginación e invención y concretización, se analiza su imaginario, su materialidad, sus estructuras y su organización, con el fin de detectar patrones y principios organizativos comunes a otros objetos técnicos. Interés de la tesis Desde el comienzo del nuevo siglo, diversos autores han demostrado un renovado interés por definir qué es el proyecto, qué lo constituye para qué sirve. Las aproximaciones al tema provienen de la filosofía analítica (Galle, 2008) o de la filosofía de la tecnología (Verbeek, 2005; Vermaas, 2009) y a menudo versan sobre la relación entre diseño y la cultura material (Dorschel 2003, Boradkar 2010 o Preston 2012). Es importante indicar el reciente y también creciente interés suscitado por la obra del filósofo francés, Gilbert Simondon [1924-1989], reconocida por su importante contribución a la filosofía de la técnica y la fenomenología, y por la influencia en el pensamiento de filósofos como Gilles Deleuze, autor presente en multitud de tesis doctorales e investigaciones teóricas llevadas a cabo en las principales escuelas de Arquitectura de todo el mundo desde los años 90 hasta el presente. La reedición y traducción de la obra de Simondon (ing. 1980, esp. 2008) ha recibido la atención de filósofos actuales como Paolo Virno, Bruno Latour o Bernard Stiegler, que siguen recurriendo a su estudio y análisis para avanzar en su pensamiento, estando por tanto presente en el debate contemporáneo sobre la técnica. Tras su reciente traducción al español, el pensamiento de Simondon ha despertado un gran interés en América Latina, como demuestra la organización de varios congresos y simposios, así como la proliferación de publicaciones en torno a su obra y pensamiento. Las futuras traducciones del resto de sus principales obras, asegurarán una introducción cada vez mayor en la comunidad académica. Se ha procurado presentar una mirada alternativa de la Historia de la Arquitectura Moderna, utilizando como guía a un cronista como Reyner Banham. La Era de la Máquina se ha cruzado con la Mecanología y el “vitalismo técnico” de Simondon, obteniendo como resultado una interpretación fresca, renovada y optimista de algunas de las más importantes obras de Arquitectura del siglo XX, que seguro contribuirán al desarrollo de la del siglo XXI, inmerso ya en el cambio de paradigma hacia la sostenibilidad y la ecología. ABSTRACT 'TRANS architecture. Imagination, invention and technical individuation of the architectural technical object. Technology transfer from the Transport Industry to Architectural Design [1900- 1973]' is a thesis dealing with the relationship between Architecture and the Technical Object during Modernity5. The theme of the thesis revolves around the technical culture, material culture and the history of twentieth-century technology. Hypothesis Held here is the existence of some architectures defined as technical objects. A study has been developed to prove if those architectures share the ontological properties of a technical object. Industry and Architecture The history of Modern Architecture is also the history of modern industry and its facilities, its products and devices, its procedures and production processes. Factories, workshops, steel mills, shipyards, mines, refineries, laboratories, cars, yachts, airplanes, airships, shuttles, space stations, home appliances, personal computers, mobile phones, motors, batteries, turbines, rigs, hulls, chassis, bodies, fuselages , composites and synthetic materials, the assembly line, modular manufacturing, the supply chain, process engineering, the planned obsolescence ... All these technical objects are constantly evolving thanks to the inconsistency of the human imagination and, as our intermediates, keep changing our way of relating and being in the world. Architecture, alike other technical objects, mediates between man and the World. In order to frame the vast field of the research, it has been filtered according to various parameters and qualities of Industry, establishing also a time frame which is related to a particular science-based way of making. The start of an industrial development, based on scientific knowledge is given from the Second Industrial Revolution -by consensus on the last third of the nineteenth century. This frame puts the focus of the thesis in the process of industrialization experienced by the Architecture of at least one century, and tours through Modernity during the first 75 years of the twenieth century. During this time, architects have made transfers of images, techniques, processes and materials from Industry, serving as a source of knowledge and thus allowing Architecture to evolve as a discipline. To reasonably address the enormous scope of the thesis, the industrial sector of transportation has ben chosen. It is not only a historical source of inspiration for architects, but also a traditional source of technology transfer for Modern Architecture. Technical sets such as shipyards, automobile factories or aircraft hangars, technical individuals as boats, cars or planes, and technical elements like the structures shaping and supporting them, are all technical objects which share properties with the architectures here presented. The launch of the moving assembly line in 1913, is instrumentally taken as a first time focus, from which to describe the evolution of many technical objects in the First Machine Age; a second focus could be found in 19586, year of the creation of the North American Space Agency (NASA), serving as a reference to the Second Machine Age. Most architectural technical objects used to test the hypothesis, gravitate around this second focus, in a range of plus or minus 25 years, with a clear intention to synchronize the time for action and time of thought. Architecture and Technical Object Technical objects have always been related to Architecture. In the past, the same technician who planned and oversaw a building structure, invented the devices and machines to carry them out. The foremen were the true 'technology transfer agents' from Industry. Their knowledge naturally related different manufacturing techniques to make diverse technical objects. Brunelleschi invented various cranes to build the dome of Santa Maria dei Fiori in Florence (ca.1461). Probably inspired by the reedition of Vitruvius’ treaty De Architectura (15 BC), whose last chapter was dedicated to the machines of classical Roman architecture and quoted inventors as Archimedes, the florentine architect was the first to patent an invention in 1421: an amphibious craft serving as a means of transportation for Carrara marble along the Arno river. At the daw of the Second Industrial Revolution, whose development was based on the scientific knowledge, we find a primitive modern example of the relationship between Architecture and a Technical Object: The Crystal Palace, built in London for the Great Exhibition of 1851 World Industry and designed by Joseph Paxton, was the largest to date industrialized building, and it will be always associated with the McCormick Reaper, worthy of the Grand Jury’s Prize. Similar characteristics could be emphasized of both technical objects, such as their industrial origin and for being be the complex result of a simple assembly of technical elements. Since then, technological development has experienced a continued acceleration, resulting in an increasing specialization and separation of knowledge about techniques which were naturally attached in the past. This process has happened at the expense of an integrative knowledge and against promiscuity between Industry and Architecture. This is, undoubtedly, an inherent sign of our time, which causes the natural and interest of architects and other technicians about transfers, trans-disciplinarity and inter-disciplinarity, as a reaction to reestablish channels of relationships between these different fields of knowledge. The emergence of technical objects as modern vehicles in the early twentieth century (the car, the Ocean liner, the airship or the airplane) is directly related to the Architecture of the First Machine Age. Modern architects’ fascination for those new ‘inhabitable’ structures has been maintained for over a century, with different intensity and paying attention to one and other technical objets, ranging from the domain of the symbolic value of the vehicles as objectsimages, during heroic period of the First Machine Age, to the more inquisitive glance characterizing the Second Machine Age, which sought a deeper understanding of the organization of such objects and the technical system to which they belonged. The periods immediately following both World Wars, showed a concentrated effort to bring new images of vehicles to the imaginary of architects, by means of publications and exhibitions. The homologous relationship between architectures and vehicles, in their capacity as living structures, is something well known since Le Corbusier used the images of cars, boats and airplanes to illustrate his manifesto, Towards an architecture in 1923. Modern vehicles have been the means by which to convey the concepts eager to transform the traditional attributes of Architecture: those relating to its manufacture, habitability, duration, functionality or aesthetics. The automobile stands out during the 30s and 50s, and the new vehicles of the Space Program satnd in the 60s and 70s. The prior knowledge and documentation of these events were a good indication to identify the industrial sector of Transportation as one of especial importance and as a fertile provider of technology transfer cases for Architecture. The Modern tradition, inaugurated by Le Corbusier in the 20s, has been maintained and defended by a host of modern architects like Albert Frey, Richard Neutra, Ralph Soriano, Charles Eames and Craig Ellwood, whose work - inspired by the legacy of previous technologists as Bucky Fuller or Jean Prouvé- was fundamental and a mandatory reference for the next generation of architects like Cedric Price, Archigram, Norman Foster, Richard Rogers, Renzo Piano, Jean and Richard Horden Kaplicky, among others. They have all contributed to increase the imaginary of the technical object, adding to it their architectural works. In the passage of the thesis, we repeatedly find a number of architects, who have been grouped according to a 'genealogical' structure, which has been called 'Technical Lineage'. Gathered by common interests and similar views or attitudes to the architectural design, understood as a technical object, they have operated through the practice of technology transfer, without limiting itself to specific compositional techniques of the architectural discipline. During the investigation, a selection of explicit references made by those architects, about other technical objects referring to their Architecture, has been compiled, showing constants and variations in their interests throughout the century, which has led to conclusions such as, having technicians sets (zeppelins factories, airships factories, car factories and shipyards) been taken by the architects of the first Modernity, as their main formal, compositional and imaginary models, while the Second Machine Age had taken them as a spatial and organizational model for their architecture. The above mentioned lineage of technologists includes weel-known ‘seed lines’ as: Eiffel- Suchov-Behrens, Gropius-Mies-LeCorbusier- Lods-Prouve, in continental Europe; British branches as Loudon-Paxton-Williams-Stirling- Gowan-Smithsons-Price-Archigram-Foster- Rogers-Piano-Kaplicky-Horden. And we could also find intercontinental connections as Fuller- Eames-Rudolph-Foster-Rogers, or other less predictable ramifications as LeRicolais-Kahn Piano-Kaplicky, or LeCorbusier-Frey-Lacaton & Vassal... Many more would surely deserve to be included in this list, and indeed, the thesis assumes the impossibility of including them all (for practical reasons) and even contemplates possible future extensions. The material included herein is to demonstrate the continuity in the approaches, statements and in the applied architectural design techniques, from which we can draw some conclusions. Today, one hundred years after Ford put up the moving assembly line, we still find this tradition alive in the words of the architect Richard Horden, whose work carries with it –as with the information embedded in every technical element- the whole techncial culture of a modern tradition. Horden is represented here as one of the exponents of what I have called the lineage of technologists. That is why I wanted to conclude the thesis with an interview to Richard Horden, held in May 2015 in his studio in London's Berkeley Square (see Appendices). Guides For the development of this thesis, another thesis, entitled: The mode of existence of technical objects, is taken as the main reference work. Read and published in 1958 by the French philosopher Gilbert Simondon [1924- 1989], it was dedicated to the ontology of the technical object. This work frames the intellectual approach of the thesis, which connects with phenomenology to mobilize a particular vision of Architecture. It is used as a model of ontological analysis to study its genesis, invention and evolutionary processes. To develop these, another work by the same author, titled Imagination and Invention (1965- 1966) has been used as a bibliographical complement. As for the disciplinary historical sources, Reyner P. Banham [1922-1988] and Martin E. Pawley [1938-2008] have been chosen as guides through the modern Architecture of the twentieth century. Their cronical reports on the First and Second Machine Age and their critical works have served as an index from which to reconstruct the imaginary of the modern technical object in the Machine Age7, and to stock up on projects and works of architecture, used as case studies for the thesis. These works have also been used as triggers for other literatures, which has been complementary to the former. Objectives of the Thesis The main objective of the thesis is to prove its hypothesis: if a work of architecture can be considered a technical object and under what conditions, building then a criterion for recognizing when a work of architecture meets the definition of a technical object. Another aim is to demonstrate the importance and power of Technology Transfer in the evolutionary process of Architecture, and to do it, some examples of a methodology for architectural design that Martin Pawley called 'Design by Assembly' are presented. It is also an objective to reconstruct an Atlas of the imaginary of the modern technical object, in order to better understand the causes, reasons and purposes that led modern architects to pursue architecture as a technical object. This Atlas allows to panoptically relate the various technical objects, revealing the true importance and significance of those and the architecture with whom they interact. Architectures are again at the largest and most complex industrial context and the history of technology, which always belonged. Thus, they are able to reveal all the knowledge-in the shape of information-carried in their own 'genetic' code, displaying full chapters of technological culture as old as mankind and constantly growing and evolving. Thesis: Proving the Hypothesis Simondon ontologically defined the technical object as ‘that of which genesis exists’ and that develops ‘a tendency towards solidarity and unity’. For an architecture to be recognized as a technical object, a number of conditions should be given, in the successive phases involved in their mode of existence: Imagination. These architectures refer to an imaginary featuring images-object other technical objects (technical sets, technical individuals and technical elements). These images are the means to an eidetic transfer of the technical objects which they symbolize. Invention. These architectures are the result of tectonic transfers, which occur during the architectural design process, by assembling materials, components or procedures used in industry for the production of other technical objects. Individuation. These architectures evolve and are individualized by ‘concretization’, a process leading to the full integration of its parts and aiming the full convergence of its functions into a single structure. This integration tends towards the naturalization of the technical object, by means of a symbiotic incorporation of their associated milieus. After checking if there is a genesis of them, which evolves through the phases of imagination and invention and concretization, their imaginary, materiality, structure and organization are analyzed in order to detect patterns and common organizational principles to other technical objects counterparts. Structure The main text of the thesis consists of three parts. Before there is an Introduction to the main concepts that are exploited in the thesis on ontology Simondonian technical object, and technology transfer applied to Architecture. Then a first part covers the Imaginary of the modern technical object, a second part is dedicated to the Invention and a third part to the individuation process The thesis ends with a section for the Discussion and the Conclusions. The Introduction to the technical object, this is ontologically defined and its different categories are distinguished. The process of genesis of the technical object and the phases of imagination, invention and indivuation are explained. Concepts as Transduction, Technicality and Technical system are presented for being fundamental to understand the concept of Technology Transfer that will take place later. The concretization is explained as the particular mode of individuation and evolution of technical objects, a process by which the different parts of a technical object, are integrated and begin a tendency towards a convergence in itself. The first part, dedicated to the Imagination of the architectural technical object presents a parcial "archaeological" reconstruction the imaginary of the modern technical object, intended to better understand its genesis and the relationship with other technical objects. The imaginary sources are searched in the premises of the Industry of the early twentieth century, and particularly in the factories of modern vehicles, in order to see, to what extent these technical objects were important to imagine modern architecture. The reconstruction is continued until the Second Machine Age, when a new, more inquisitive and precise gaze turns to other factories, other vehicles and other components and materials, inquiring now about their organizational qualities. The second part is devoted to the Invention of the architectural technical object. The effectiveness of the simondonian concept of Transduction is checked: a transmitted and transformed sign or information, which relates to Technology Transfer, a synergetic process by which an industrial sector benefits from the development of another sector, to which some architects and historians have explicitly referred to explain their works during Machine Age, and which is crucial for the development of the industry. Technology transfer would be the transmission of a set of information or knowledge about technique, including the factual sphere of technique, but also the sensitive sphere of experience. In their application to Architecture, these transfers have been classified according to three types: Eidetic, Tectonic and Organic. Eidetic Transfers operate from an intuitive knowledge and are useful for transmitting information about the essence of the technical object serving as a source. Abstract concepts are transmitted through the object-images to produce an equivalent transformation in Architecture. A group of concepts that have been the subject of technology transfers of eidetic nature, and have been originated in the imaginary of the modern technical object, have been detected as a result of the research: FABRICATED, INHABITABLE, FUNCTIONAL, EFFICIENT, OBSOLESCENT, and BEAUTIFUL. The transfers can also be Tectonic when, that which is transferred is a constructive or structural technique, applied through artificial MATERIALS such as metals, composites as the ferrocement, or plywood, or alloys such as aluminum; or by means of the assembly of STRUCTURES or parts of other technical objects such as hulls, fuselages, car bodies or rigs, resulting in the invention of a new architectural technical object. In the case of ORGANIC transfers, what is transferred is an organizational technique, applied by means of a set of PROCEDURES defining the activity of the architect as a technologist and inventor of technical objects. These procedures have a transformative effect on three traditional institutions for Architecture: the School, the Atelier and the Work, and the results are summarized in new models of organization of the Education of Architecture, with the onset of the Architectural Design Studios or workshops; new models of organization of the practice of architect: the technical office; and new models of space organization, based on the spatial organization of the industry, resulting in spatial patterns or spatial matrices; a new model of organization of the project, which uses graphical tools and industrail protocols as the assembly as a methodology; a new model of architectural production based on the industrialization. After explaining the concepts and the genesis of assembly and montage, Design by assembly is presented as a method that promotes architectural invention, and is shown using some case studies analyzed in the thesis, in which there has been made some conceptual, constructive or organizational transfer. After analyzing the architectures studied in the thesis, genetic method proposed by Simondon was used to understand every particular evolution, reconstructing their genealogical lines up to their ancestors, identifying a series of genetic lineages, which correspond to the technical sets studied in the thesis : the shipyard, the car factory, and aircraft factory. The real ancestors of Modernity. The spatial organization systems of these technical sets are directly related to the technical object that is fabricated within them. From that point, a number of operational matrices are defined (MILL, SHOP, SHED) and used to make a taxonomy of the architectural technical object. This is exemplified by some projects by architects as Norman Foster, Richard Rogers, Renzo Piano, Nicholas Grimshaw, Jean and Richard Horden Kaplicky. Interest of the thesis Since the beginning of the new century, several authors have shown a renewed interest in defining what a project is, how it is constituted and what it is for. The approaches to the subject are brought from analytic philosophy (Galle, 2008) or from the philosophy of technology (Verbeek, 2005; Vermaas, 2009) and they often speak about the relationship between design and material culture (Dorschel 2003, 2010 or Preston Boradkar 2012). It is also important to note the recent and growing interest in the work of French philosopher Gilbert Simondon [1924-1989], mainly known for its important contribution to the philosophy of technology and phenomenology of the technical object, and the influence on the thinking of contemporary philosophers as Paolo Virno, Bruno Latour or Gilles Deleuze, being the latter a author present in many doctoral theses and theoretical research conducted at major architecture schools around the world since the 90s to the present. The republication and translation of the work of Simondon (eng. 1980, spn. 2008) has received the attention from current philosophers such as Bernard Stiegler who continues to use its study and analysis to advance his thinking, thus being present in the contemporary debate about the technique. After its recent translation into Spanish, the thought of Simondon has aroused great interest in Latin America, as evidenced by the organization of various conferences and symposia, as well as the proliferation of publications about his work and thought8. Future translations of the rest of his major works, will ensure increased introduction in the academic community. Efforts have been made to present an alternative view of the History of Modern Architecture, using a reporter as Reyner P.Banham as a guide. The Machine Age intersects Simondon’s mechanology and his "technical vitalism", resulting in a fresh, renewed and optimistic interpretation of some of the most important works of Architecture of the twentieth century, which will surely contribute to the development of this century’s Architecture, already immersed in the paradigm shift towards sustainability and ecology.

50 Years Ago We Marched: What began on the grounds of Lincoln University, ended on the steps of the Alabama State Capitol

LINCOLN UNIVERSITY - On March 25, 1965, a bus loaded with Lincoln University students and staff arrived in Montgomery, Ala. to join the Selma march for racial and voting equality. Although the Civil Rights Act of 1964 was in force, African-Americans continued to feel the effects of segregation. The 1960s was a decade of social unrest and change. In the Deep South, specifically Alabama, racial segregation was a cultural norm resistant to change. Governor George Wallace never concealed his personal viewpoints and political stance of the white majority, declaring “Segregation now, segregation tomorrow, segregation forever.” The march was aimed at obtaining African-Americans their constitutionally protected right to vote. However, Alabama’s deep-rooted culture of racial bias began to be challenged by a shift in American attitudes towards equality. Both black and whites wanted to end discrimination by using passive resistance, a movement utilized by Dr. Martin Luther King Jr. That passive resistance was often met with violence, sometimes at the hands of law enforcement and local citizens. The Selma to Montgomery march was a result of a protest for voting equality. The Student Nonviolent Coordinating Committee (SNCC) and the Southern Christian Leadership Counsel (SCLC) among other students marched along the streets to bring awareness to the voter registration campaign, which was organized to end discrimination in voting based on race. Violent acts of police officers and others were some of the everyday challenges protesters were facing. Forty-one participants from Lincoln University arrived in Montgomery to take part in the 1965 march for equality. Students from Lincoln University’s Journalism 383 class spent part of their 2015 spring semester researching the historical event. Here are their stories: Peter Kellogg “We’ve been watching the television, reading about it in the newspapers,” said Peter Kellogg during a February 2015 telephone interview. “Everyone knew the civil rights movement was going on, and it was important that we give him (Robert Newton) some assistance … and Newton said we needed to get involve and do something,” Kellogg, a lecturer in the 1960s at Lincoln University, discussed how the bus trip originated. “That’s why the bus happened,” Kellogg said. “Because of what he (Newton) did - that’s why Lincoln students went and participated.” “People were excited and the people along the sidewalk were supportive,” Kellogg said. However, the mood flipped from excited to scared and feeling intimidated. “It seems though every office building there was a guy in a blue uniform with binoculars standing in the crowd with troops and police. And if looks could kill me, we could have all been dead.” He says the hatred and intimidation was intense. Kellogg, being white, was an immediate target among many white people. He didn’t realize how dangerous the event in Alabama was until he and the others in the bus heard about the death of Viola Liuzzo. The married mother of five from Detroit was shot and killed by members of the Ku Klux Klan while shuttling activists to the Montgomery airport. “We found out about her death on the ride back,” Kellogg recalled. “Because it was a loss of life, and it shows the violence … we could have been exposed to that danger!” After returning to LU, Kellogg’s outlook on life took a dramatic turn. Kellogg noted King’s belief that a person should be willing to die for important causes. “The idea is that life is about something larger and more important than your own immediate gratification, and career success or personal achievements,” Kellogg said. “The civil rights movement … it made me, it made my life more significant because it was about something important.” The civil rights movement influenced Kellogg to change his career path and to become a black history lecturer. Until this day, he has no regrets and believes that his choices made him as a better individual. The bus ride to Alabama, he says, began with the actions of just one student. Robert Newton Robert Newton was the initiator, recruiter and leader of the Lincoln University movement to join Dr. Martin Luther King’s march in Selma. “In the 60s much of the civil rights activists came out of college,” said Newton during a recent phone interview. Many of the events that involved segregation compelled college students to fight for equality. “We had selected boycotts of merchants, when blacks were not allowed to try on clothes,” Newton said. “You could buy clothes at department stores, but no blacks could work at the department stores as sales people. If you bought clothes there you couldn’t try them on, you had to buy them first and take them home and try them on.” Newton said the students risked their lives to be a part of history and influence change. He not only recognized the historic event of his fellow Lincolnites, but also recognized other college students and historical black colleges and universities who played a vital role in history. “You had the S.N.C.C organization, in terms of voting rights and other things, including a lot of participation and working off the bureau,” Newton said. Other schools and places such as UNT, Greenville and Howard University and other historically black schools had groups that came out as leaders. Newton believes that much has changed from 50 years ago. “I think we’ve certainly come a long way from what I’ve seen from the standpoint of growing up outside of Birmingham, Alabama,” Newton said. He believes that college campuses today are more organized in their approach to social causes. “The campus appears to be some more integrated amongst students in terms of organizations and friendships.” Barbara Flint Dr. Barbara Flint grew up in the southern part of Arkansas and came to Lincoln University in 1961. She describes her experience at Lincoln as “being at Lincoln when the world was changing.“ She was an active member of Lincoln’s History Club, which focused on current events and issues and influenced her decision to join the Selma march. “The first idea was to raise some money and then we started talking about ‘why can’t we go?’ I very much wanted to be a living witness in history.” Reflecting on the march and journey to Montgomery, Flint describes it as being filled with tension. “We were very conscious of the fact that once we got on the road past Tennessee we didn’t know what was going to happen,” said Flint during a February 2015 phone interview. “Many of the students had not been beyond Missouri, so they didn’t have that sense of what happens in the South. Having lived there you knew the balance as well as what is likely to happen and what is not likely to happen. As my father use to say, ‘you have to know how to stay on that line of balance.’” Upon arriving in Alabama she remembers the feeling of excitement and relief from everyone on the bus. “We were tired and very happy to be there and we were trying to figure out where we were going to join and get into the march,” Flint said. “There were so many people coming in and then we were also trying to stay together; that was one of the things that really stuck out for me, not just for us but the people who were coming in. You didn’t want to lose sight of the people you came with.” Flint says she was keenly aware of her surroundings. For her, it was more than just marching forward. “I can still hear those helicopters now,” Flint recalled. “Every time the helicopters would come over the sound would make people jump and look up - I think that demonstrated the extent of the tenseness that was there at the time because the helicopters kept coming over every few minutes.” She said that the marchers sang “we are not afraid,” but that fear remained with every step. “Just having been there and being a witness and marching you realize that I’m one of those drops that’s going to make up this flood and with this flood things will move,” said Flint. As a student at Lincoln in 1965, Flint says the Selma experience undoubtedly changed her life. “You can’t expect to do exactly what you came to Lincoln to do,” Flint says. “That march - along with all the other marchers and the action that was taking place - directly changed the paths that I and many other people at Lincoln would take.” She says current students and new generations need to reflect on their personal role in society. “Decide what needs to be done and ask yourself ‘how can I best contribute to it?’” Flint said. She notes technology and social media can be used to reach audiences in ways unavailable to her generation in 1965. “So you don’t always have to wait for someone else to step out there and say ‘let’s march,’ you can express your vision and your views and you have the means to do so (so) others can follow you. Jaci Newsom Jaci Newsom came to Lincoln in 1965 from Atlanta. She came to Lincoln to major in sociology and being in Jefferson City was largely different from what she had grown up with. “To be able to come into a restaurant, sit down and be served a nice meal was eye-opening to me,” said Newsom during a recent interview. She eventually became accustomed to the relaxed attitude of Missouri and was shocked by the situation she encountered on an out-of-town trip. “I took a bus trip from Atlanta to Pensacola and I encountered the worse racism that I have ever seen. I was at bus stop, I went in to be served and they would not serve me. There was a policeman sitting there at the table and he told me that privately owned places could select not to serve you.” Newsom describes her experience of marching in Montgomery as being one with a purpose. “We felt as though we achieved something - we felt a sense of unity,” Newsom said. “We were very excited (because) we were going to hear from Martin Luther King. To actually be in the presence of him and the other civil rights workers there was just such enthusiasm and excitement yet there was also some apprehension of what we might encounter.” Many of the marchers showed their inspiration and determination while pressing forward towards the grounds of the Alabama Capitol building. Newsom recalled that the marchers were singing the lyrics “ain’t gonna let nobody turn me around” and “we shall overcome.” “ I started seeing people just like me,” Newsom said. “I don’t recall any of the scowling, the hitting, the things I would see on TV later. I just saw a sea of humanity marching towards the Capitol. I don’t remember what Martin Luther King said but it was always the same message: keep the faith; we’re going to get where we’re going and let us remember what our purpose is.” Newsom offers advice on what individuals can do to make their society a more productive and peaceful place. “We have come a long way and we have ways to change things that we did not have before,” Newsom said. “You need to work in positive ways to change.” Referencing the recent unrest in Ferguson, Mo., she believes that people become destructive as a way to show and vent anger. Her generation, she says, was raised to react in lawful ways – and believe in hope. “We have faith to do things in a way that was lawful and it makes me sad what people do when they feel without hope, and there is hope,” Newsom says. “Non-violence does work - we need to include everyone to make this world a better place.” Newsom graduated from Lincoln in 1969 and describes her experience at Lincoln as, “I grew up and did more growing at Lincoln than I think I did for the rest of my life.”

EM NOME DA ORDEM : O papel dos agentes da religião católica institucionalizada durante o movimento e guerra do Contestado entre 1912-1916

Esta tese analisa o papel dos líderes da Igreja católica institucionalizada antes e durante o movimento e guerra do Contestado de 1912 a 1916. Movimento classificado como messiânico-milenarista ocorrido no sul do Brasil numa área litigiosa pleiteada pelos Estados do Paraná e Santa Catarina. Aponta o contexto sócio-econômico-político e religioso que criou condições para que o movimento pudesse emergir. Analisa a formação do catolicismo rústico popular brasileiro e suas expressões na região do Contestado, destacando-se o papel dos monges. Aprofunda a compreensão do catolicismo oficial em processo de romanização e do papel dos frades franciscanos, de suas concepções e práticas na tentativa de enquadrar a religião cabocla dentro dos princípios da reforma. Analisa a reação cabocla diante das mudanças implantadas na região e a explosão da irmandade, denominada Terra Santa , que buscava efetivar uma nova ordem . Aprofunda especialmente o papel dos frades representantes da Igreja católica, tendo em vista dispersar e pacificar o caboclo rebelde e a aliança, que estabeleceram com as forças repressoras, para implantar a ordem e a paz na região contestada, com a conseqüente eliminação radical da irmandade cabocla e de seus redutos .(AU)