Modelling Breaks and Clusters in the Steady States of Macroeconomic Variables

Macroeconomists working with multivariate models typically face uncertainty over which (if any) of their variables have long run steady states which are subject to breaks. Furthermore, the nature of the break process is often unknown. In this paper, we draw on methods from the Bayesian clustering literature to develop an econometric methodology which: i) finds groups of variables which have the same number of breaks; and ii) determines the nature of the break process within each group. We present an application involving a five-variate steady-state VAR.

The Signalling Channel of Central Bank Interventions: Modelling the Yen/US Dollar Exchange Rate

This paper presents a theoretical framework analysing the signalling channel of exchange rate interventions as an informational trigger. We develop an implicit target zone framework with learning in order to model the signalling channel. The theoretical premise of the model is that interventions convey signals that communicate information about the exchange rate objectives of central bank. The model is used to analyse the impact of Japanese FX interventions during the period 1999 -2011 on the yen/US dollar dynamics.

The regional employment impacts of renewable energy expenditures: The case for modelling

One aspect of the case for policy support for renewable energy developments is the wider economic benefits that are expected to be generated. Within Scotland, as with other regions of the UK, there is a focus on encouraging domestically‐based renewable technologies. In this paper, we use a regional computable general equilibrium framework to model the impact on the Scottish economy of expenditures relating to marine energy installations. The results illustrate the potential for (considerable) ‘legacy’ effects after expenditures cease. In identifying the specific sectoral expenditures with the largest impact on (lifetime) regional employment, this approach offers important policy guidance.

The regional employment impacts of renewable energy expenditures: The case for modelling

One aspect of the case for policy support for renewable energy developments is the wider economic benefits that are expected to be generated. Within Scotland, as with other regions of the UK, there is a focus on encouraging domestically‐based renewable technologies. In this paper, we use a regional computable general equilibrium framework to model the impact on the Scottish economy of expenditures relating to marine energy installations. The results illustrate the potential for (considerable) ‘legacy’ effects after expenditures cease. In identifying the specific sectoral expenditures with the largest impact on (lifetime) regional employment, this approach offers important policy guidance.

The regional economic impacts of biofuels: A review of multisectoral modelling techniques and evaluation of applications

The regional economic impact of biofuel production depends upon a number of interrelated factors: the specific biofuels feedstock and production technology employed; the sector’s embeddedness to the rest of the economy, through its demand for local resources; the extent to which new activity is created. These issues can be analysed using multisectoral economic models. Some studies have used (fixed price) Input-Output (IO) and Social Accounting Matrix (SAM) modelling frameworks, whilst a nascent Computable General Equilibrium (CGE) literature has also begun to examine the regional (and national) impact of biofuel development. This paper reviews, compares and evaluates these approaches for modelling the regional economic impacts of biofuels.

The Signalling Channel of Central Bank Interventions: Modelling the Yen/US Dollar Exchange Rate

This paper presents a theoretical framework analysing the signalling channel of exchange rate interventions as an informational trigger. We develop an implicit target zone framework with learning in order to model the signalling channel. The theoretical premise of the model is that interventions convey signals that communicate information about the exchange rate objectives of central bank. The model is used to analyse the impact of Japanese FX interventions during the period 1999 -2011 on the yen/US dollar dynamics.

The regional economic impacts of biofuels: A review of multisectoral modelling techniques and evaluation of applications

The regional economic impact of biofuel production depends upon a number of interrelated factors: the specific biofuels feedstock and production technology employed; the sector’s embeddedness to the rest of the economy, through its demand for local resources; the extent to which new activity is created. These issues can be analysed using multisectoral economic models. Some studies have used (fixed price) Input-Output (IO) and Social Accounting Matrix (SAM) modelling frameworks, whilst a nascent Computable General Equilibrium (CGE) literature has also begun to examine the regional (and national) impact of biofuel development. This paper reviews, compares and evaluates these approaches for modelling the regional economic impacts of biofuels.

Innovació tecnològica a la construcció subterrània

Report for the scientific sojourn carried out in the International Center for Numerical Methods in Engineering (CIMNE) –state agency – from February until November 2007. The work within the project Technology innovation in underground construction can be grouped into the following tasks: development of the software for modelling underground excavation based on the discrete element method - the numerical algorithms have been implemented in the computer programs and applied to simulation of excavation using roadheaders and TBM-s -; coupling of the discrete element method with the finite element method; development of the numerical model of rock cutting taking into account of wear of rock cutting tools -this work considers a very important factor influencing effectiveness of underground works -.

Ecological-economic modelling of interactions between wild and commercial bees and pesticide use

The decline in extent of wild pollinators in recent years has been partly associated with changing farm practices and in particular with increase of pesticide use. In this paper we combine ecological modelling with economic analysis of a single farm output under the assumption that both pollination and pest control are essential inputs. We show that the drive to increase farm output can lead to a local decline in the wild bee population. Commercial bees are often considered an alternative to wild pollinators, but we show that their introduction can lead to further decline and finally local extinction of wild bees. The transitions between different outcomes are characterised by threshold behaviour and are potentially difficult to predict and detect in advance. Small changes in economic (input prices) and ecological (wild bees carrying capacity and effect of pesticides on bees) can move the economic-ecological system beyond the extinction threshold. We also show that increasing the pesticide price or decreasing the commercial bee price might lead to reestablishment of wild bees following their local extinction. Thus, we demonstrate the importance of combining ecological modelling with economics to study the provision of ecosystem services and to inform sustainable management of ecosystem service providers.

Modelling Housing Prices using a Present Value State Space Model

This paper introduces a State Space approach to explain the dynamics of rent growth, expected returns and Price-Rent ratio in housing markets. According to the present value model, movements in price to rent ratio should be matched by movements in expected returns and expected rent growth. The state space framework assume that both variables follow an autoregressive process of order one. The model is applied to the US and UK housing market, which yields series of the latent variables given the behaviour of the Price-Rent ratio. Resampling techniques and bootstrapped likelihood ratios show that expected returns tend to be highly persistent compared to rent growth. The Öltered expected returns is considered in a simple predictability of excess returns model with high statistical predictability evidenced for the UK. Overall, it is found that the present value model tends to have strong statistical predictability in the UK housing markets.

Modelling Housing Prices using a Present Value State Space Model

This paper introduces a State Space approach to explain the dynamics of rent growth, expected returns and Price-Rent ratio in housing markets. According to the present value model, movements in price to rent ratio should be matched by movements in expected returns and expected rent growth. The state space framework assume that both variables follow an autoregression process of order one. The model is applied to the US and UK housing market, which yields series of the latent variables given the behaviour of the Price-Rent ratio. Resampling techniques and bootstrapped likelihood ratios show that expected returns tend to be highly persistent compared to rent growth. The filtered expected returns is considered in a simple predictability of excess returns model with high statistical predictability evidence for the UK. Overall, it is found that the present value model tends to have strong statistical predictability in the UK housing markets.

Computer-assisted placement technique in hip resurfacing arthroplasty: improvement in accuracy?

Freehand positioning of the femoral drill guide is difficult during hip resurfacing and the surgeon is often unsure of the implant position achieved peroperatively. The purpose of this study was to find out whether, by using a navigation system, acetabular and femoral component positioning could be made easier and more precise. Eighteen patients operated on by the same surgeon were matched by sex, age, BMI, diagnosis and ASA score (nine patients with computer assistance, nine with the regular ancillary). Pre-operative planning was done on standard AP and axial radiographs with CT scan views for the computer-assisted operations. The final position of implants was evaluated by the same radiographs for all patients. The follow-up was at least 1 year. No difference between both groups in terms of femoral component position was observed (p > 0.05). There was also no difference in femoral notching. A trend for a better cup position was observed for the navigated hips, especially for cup anteversion. There was no additional operating time for the navigated hips. Hip navigation for resurfacing surgery may allow improved visualisation and hip implant positioning, but its advantage probably will be more obvious with mini-incisions than with regular incision surgery.

Sistema de monitorització Open Source: projecte d'empresa per Computer Technology Catalunya

L’objectiu del projecte consisteix en l’estudi, simulació i implantació d’un conjunt d’aplicacions que permeten tenir un control sobre possibles problemes que puguin succeir a la nostra xarxa. Aquest projecte és la solució als problemes de detecció d’errors en el funcionament de les infraestructures de networking de les que disposen els nostres clients.

Modelling dependence in a ratemaking procedure with multivariate Poisson regression models

When actuaries face with the problem of pricing an insurance contract that contains different types of coverage, such as a motor insurance or homeowner's insurance policy, they usually assume that types of claim are independent. However, this assumption may not be realistic: several studies have shown that there is a positive correlation between types of claim. Here we introduce different regression models in order to relax the independence assumption, including zero-inflated models to account for excess of zeros and overdispersion. These models have been largely ignored to multivariate Poisson date, mainly because of their computational di±culties. Bayesian inference based on MCMC helps to solve this problem (and also lets us derive, for several quantities of interest, posterior summaries to account for uncertainty). Finally, these models are applied to an automobile insurance claims database with three different types of claims. We analyse the consequences for pure and loaded premiums when the independence assumption is relaxed by using different multivariate Poisson regression models and their zero-inflated versions.

Modelling the cooling of concrete by piped water

Piped water is used to remove hydration heat from concrete blocks during construction. In this paper we develop an approximate model for this process. The problem reduces to solving a one-dimensional heat equation in the concrete, coupled with a first order differential equation for the water temperature. Numerical results are presented and the effect of varying model parameters shown. An analytical solution is also provided for a steady-state constant heat generationmodel. This helps highlight the dependence on certain parameters and can therefore provide an aid in the design of cooling systems.