Numerical studies on CFRP strengthened steel circular members under marine environment

The durability of carbon fibre reinforced polymer (CFRP) strengthened steel circular hollow section (CHS) members has now become a real challenge to researchers. In addition, various parameters that may affect the durability of such members have not been revealed yet. This paper presents brief experimental results and the first finite element (FE) approach of CFRP strengthened steel CHS beams conditioned in simulated sea water, along with an accelerated corrosion environment at ambient (24 OC ± 4 OC) and 50 OC temperatures. The beams were loaded to failure under four-point bending. It was found that the strength and stiffness reduced significantly after conditioning in an accelerated corrosion environment. Numerical simulation is implemented using the ABAQUS static general approach. A cohesive element was utilised to model the interface element and an 8-node quadrilateral in-plane general-purpose continuum shell was used to model CFRP elements. A mixed mode cohesive law was deployed for all the three components of stresses in the proposed FE approach, which were one normal component and two shear components. The validity of the FE models was ascertained by comparing the ultimate load and load vs deflection response from experimental results. A range of parametric studies were conducted to investigate the effects of bond length, adhesive types, thickness and diameter of tubes. The results of parametric studies indicated that the adhesive with high tensile modulus performed better and durability design factors varied from section to section.

Effect of Time of Planting and Plant Size on the Productivity of ‘Festival’ and ‘Florida Fortuna’ Strawberry Plants in a Subtropical Environment

The effect of time of planting and plant size on the performance of ‘Festival’ and ‘Florida Fortuna’ strawberry (Fragaria ×ananassa) plants was studied at Nambour in southeastern Queensland, Australia, over 2 years. The main objective of the work was to determine whether small plants yielded proportionally less than large plants as planting was delayed. First, bare-rooted transplants of ‘Festival’ were divided into small (crown diameters ranging from 6 to 10 mm) or large plants (10 to 17 mm) and planted in late March, mid-April, or late April. Second, transplants of ‘Florida Fortuna’ were divided into small (5 to 8 mm) or large plants (8 to 17 mm) and planted in early April, mid-April, or early May. The early planting for each cultivar corresponded with the time that the transplants are first available from commercial strawberry nurseries. Yields were generally greater in plants planted in late March/early April compared with plants planted later. Differences in yield between the small and large plants were consistent across the different times of planting, with the small plants always having lower yields. Small transplants are an issue for the productivity of strawberry fields in this environment whether they are planted early or late. Producers should consider paying a premium for large transplants delivered early in the season.

Relationship Between the Levels of Non-structural Carbohydrates, Digging Date, Nursery-growing Environment, and Chilling in Strawberry Transplants in a Subtropical Environment

Experiments were conducted to study the effect of time of digging and nursery-growing environment on the levels of non-structural carbohydrates in 'Festival' strawberry transplants (Fragaria xananassa) over 2 years in southeastern Queensland, Australia. We were interested in determining whether there was a strong relationship between the potential productivity of this material and reserves in the plants. First, bare-rooted plants were obtained from Stanthorpe in southern Queensland from early March to mid-April/late April. Second, bare-rooted plants were sourced from Stanthorpe (a warm-growing area) or from Toolangi in Victoria (a cool-growing area). In Year 1 of the experiments, the nursery material from the different treatments was grown at Nambour in southeastern Queensland and fruit yield determined. The total weight of nonstructural carbohydrates/plant increased as digging was delayed and was higher in the plants from Stanthorpe than the plants from Toolangi. Plants dug on 17 Mar. in Year 1 had higher weights of non-structural carbohydrates [292 mg/plant dry weight (DW)] than plants dug on 3 Mar. (224 mg/plant) and higher early yield to the end of June or to the end of July and higher total yield to mid-October adjusted by the length of the growing season for the different treatments. Plants dug on 1 Apr. (408 mg/plant) or on 13 Apr. (445 mg/plant) had higher reserves than the plants dug on 17 Mar. but lower yields. Only the differences in yields between the plants dug on 3 Mar. and 17 Mar. reflected the differences in carbohydrates. The stock from Stanthorpe had greater reserves (408 mg/plant) than the stock from Toolangi (306 mg/plant) but similar yields in Year 1 possibly because of poorer flowering in the nursery plants. It was concluded that carbohydrate reserves in transplants only partially reflect their productivity in this environment.

Poverty and the Environment : Investment Poverty and the Role of Assets in Generating Welfare for Farmer Households in the Province of Herrera, Panama

Köyhiä maanviljelijöitä on usein syytetty kehitysmaiden ympäristöongelmista. On väitetty, että eloonjäämistaistelu pakottaa heidät käyttämään maata ja muita luonnonvaroja lyhytnäköisesti. Harva asiaa koskeva tutkimus on kuitenkaan tukenut tätä väitettä; perheiden köyhyyden astetta ja heidän aiheuttamaansa ympäristövaikutusta ei ole kyetty kytkemään toisiinsa. Selkeyttääkseen köyhyys-ympäristö –keskustelua, Thomas Reardon ja Steven Vosti kehittivät investointiköyhyyden käsitteen. Se tunnistaa sen kenties suuren joukon maanviljelijäperheitä, jotka eivät ole köyhiä perinteisten köyhyysmittareiden mukaan, mutta joiden hyvinvointi ei ole riittävästi köyhyysrajojen yläpuolella salliakseen perheen investoida kestävämpään maankäyttöön. Reardon ja Vosti korostivat myös omaisuuden vaikutusta perheiden hyvinvointiin, ja uskoivat sen vaikuttavan tuotanto- ja investointipäätöksiin. Tässä tutkimuksessa pyritään vastaamaan kahteen kysymykseen: Miten investointiköyhyyttä voidaan ymmärtää ja mitata? Ja, mikä on viljelijäperheiden omaisuuden hyvinvointia lisäävä vaikutus? Tätä tutkimusta varten haastateltiin 402 maanviljelijäperhettä Väli-Amerikassa, Panaman tasavallan Herreran läänissä. Näiden perheiden hyvinvointia mitattiin heidän kulutuksensa mukaan, ja paikalliset köyhyysrajat laskettiin paikallisen ruoan hinnan mukaan. Herrerassa ihminen tarvitsee keskimäärin 494 dollaria vuodessa saadakseen riittävän ravinnon, tai 876 dollaria vuodessa voidakseen ravinnon lisäksi kattaa muitakin välttämättömiä menoja. Ruoka- eli äärimmäisen köyhyyden rajan alle jäi 15,4% tutkituista perheistä, ja 33,6% oli jokseenkin köyhiä, eli saavutti kyllä riittävän ravitsemuksen, muttei kyennyt kustantamaan muita perustarpeitaan. Molempien köyhyysrajojen yläpuolelle ylsi siis 51% tutkituista perheistä. Näiden köyhyysryhmien välillä on merkittäviä eroavaisuuksia ei vain perheiden varallisuuden, tulojen ja investointistrategioiden välillä, mutta myös perheiden rakenteessa, elinympäristössä ja mahdollisuuksissa saada palveluja. Investointiköyhyyden mittaaminen osoittautui haastavaksi. Herrerassa viljelijät eivät tee investointeja puhtaasti ympäristönsuojeluun, eikä maankäytön kestävyyttä muutenkaan pystytty yhdistämään perheiden hyvinvoinnin tasoon. Siksi investointiköyhyyttä etsittiin sellaisena hyvinvoinnin tasona, jonka alapuolella elävien perheiden parissa tuottavat maanparannusinvestoinnit eivät enää ole suorassa suhteessa hyvinvointiin. Tällaisia investointeja ovat mm. istutetut aidat, lannoitus ja paranneltujen laiduntyyppien viljely. Havaittiin, että jos perheen hyvinvointi putoaa alle 1000 dollarin/henkilö/vuosi, tällaiset tuottavat maanparannusinvestoinnit muuttuvat erittäin harvinaisiksi. Investointiköyhyyden raja on siis noin kaksi kertaa riittävän ravitsemuksen hinta, ja sen ylitti 42,3% tutkituista perheistä. Heille on tyypillistä, että molemmat puolisot käyvät työssä, ovat korkeasti koulutettuja ja yhteisössään aktiivisia, maatila tuottaa paremmin, tilalla kasvatetaan vaativampia kasveja, ja että he ovat kerryttäneet enemmän omaisuutta kuin investointi-köyhyyden rajan alla elävät perheet. Tässä tutkimuksessa kyseenalaistettiin yleinen oletus, että omaisuudesta olisi poikkeuksetta hyötyä viljelijäperheelle. Niinpä omaisuuden vaikutusta perheiden hyvinvointiin tutkittiin selvittämällä, mitä reittejä pitkin perheiden omistama maa, karja, koulutus ja työikäiset perheenjäsenet voisivat lisätä perheen hyvinvointia. Näiden hyvinvointi-mekanismien ajateltiin myös riippuvan monista väliin tulevista tekijöistä. Esimerkiksi koulutus voisi lisätä hyvinvointia, jos sen avulla saataisiin paremmin palkattuja töitä tai perustettaisiin yritys; mutta näihin mekanismeihin saattaa vaikuttaa vaikkapa etäisyys kaupungeista tai se, omistaako perhe ajoneuvon. Köyhimpien perheiden parissa nimenomaan koulutus olikin ainoa tutkittu omaisuuden muoto, joka edisti perheen hyvinvointia, kun taas maasta, karjasta tai työvoimasta ei ollut apua köyhyydestä nousemiseen. Varakkaampien perheiden parissa sen sijaan korkeampaa hyvinvointia tuottivat koulutuksen lisäksi myös maa ja työvoima, joskin monesta väliin tulevasta muuttujasta, kuten tuotantopanoksista riippuen. Ei siis ole automaatiota, jolla omaisuus parantaisi perheiden hyvinvointia. Vaikka rikkailla onkin yleensä enemmän karjaa kuin köyhemmillä, ei tässä aineistossa löydetty yhtään mekanismia, jota kautta karjan määrä tuottaisi korkeampaa hyvinvointia viljelijäperheille. Omaisuuden keräämisen ja hyödyntämisen strategiat myös muuttuvat hyvinvoinnin kasvaessa ja niihin vaikuttavat monet ulkoiset tekijät. Ympäristön ja köyhyyden suhde on siis edelleen epäselvä. Köyhyyden voittaminen vaatii pitkällä tähtäimellä sitä, että viljelijäperheet nousisivat investointiköyhyyden rajan yläpuolelle. Näin heillä olisi varaa alkaa kartuttaa omaisuutta ja investoida kestävämpään maankäyttöön. Tällä hetkellä kuitenkin isolle osalle herreralaisia perheitä tuo raja on kaukana tavoittamattomissa. Miten päästä yli tuhannen dollarin kulutukseen perheenjäsentä kohden, mikäli elintaso ei yllä edes riittävään ravitsemukseen? Ja sittenkin, vaikka hyvinvointi kohenisi, ei ympäristön kannalta parannuksia ole välttämättä odotettavissa, mikäli karjalaumat kasvavat ja eroosioalttiit laitumet leviävät.

Low-frequency electrical stimulation combined with a cooling vest improves recovery of elite kayakers following a simulated 1000-m race in a hot environment

This study compared the effects of a low-frequency electrical stimulation (LFES; Veinoplus® Sport, Ad Rem Technology, Paris, France), a low-frequency electrical stimulation combined with a cooling vest (LFESCR) and an active recovery combined with a cooling vest (ACTCR) as recovery strategies on performance (racing time and pacing strategies), physiologic and perceptual responses between two sprint kayak simulated races, in a hot environment (∼32 wet-bulb-globe temperature). Eight elite male kayakers performed two successive 1000-m kayak time trials (TT1 and TT2), separated by a short-term recovery period, including a 30-min of the respective recovery intervention protocol, in a randomized crossover design. Racing time, power output, and stroke rate were recorded for each time trial. Blood lactate concentration, pH, core, skin and body temperatures were measured before and after both TT1 and TT2 and at mid- and post-recovery intervention. Perceptual ratings of thermal sensation were also collected. LFESCR was associated with a very likely effect in performance restoration compared with ACTCR (99/0/1%) and LFES conditions (98/0/2%). LFESCR induced a significant decrease in body temperature and thermal sensation at post-recovery intervention, which is not observed in ACTCR condition. In conclusion, the combination of LFES and wearing a cooling vest (LFESCR) improves performance restoration between two 1000-m kayak time trials achieved by elite athletes, in the heat.

Optimizing genotype by environment by management to maximize opportunities for maize productivity in North Eastern Australia.

The major objective of this experiment was to identify optimum plant population densities for different maize maturity groups depending on the environments’ potential and identify situations that reduce risk of crop failures while maximizing opportunities for better yield when weather conditions are good.

The Productivity of Strawberry Plants Growing Under Plastic High Tunnels in a Wet Subtropical Environment

The effect of plastic high tunnels on the performance of two strawberry (Fragaria ×ananassa) cultivars (Festival and Rubygem) and two breeding lines was studied in southeastern Queensland, Australia, over 2 years. Production in this area is affected by rain, with direct damage to the fruit and the development of fruit disease before harvest. The main objective of the study was to determine whether plants growing under tunnels had less rain damage, a lower incidence of disease, and higher yields than plants growing outdoors. Plants growing under the tunnels or outdoors had at best only small differences in leaf, crown, root, and flower and immature fruit dry weight. These responses were associated with relatively similar temperatures and relative humidities in the two growing environments. Marketable yields were 38% higher under the tunnels compared with yields outdoors in year 1, and 24% higher in year 2, mainly due to less rain damage. There were only small differences in the incidences of grey mold (Botrytis cinerea) and small and misshaped fruit in the plants growing under the tunnels and outdoors. There were also only small differences in postharvest quality, total soluble solids, and titratable acidity between the two environments. These results highlight the potential of plastic high tunnels for strawberry plants growing in subtropical areas that receive significant rainfall during the production season.

Scientists in Control: a progressive approach to preparing work ready graduates in QC, EQA and method evaluation

Introduction QC, EQA and method evaluation are integral to delivery of quality patient results. To ensure QUT graduates have a solid grounding in these key areas of practice, a theory-to-practice approach is used to progressively develop and consolidate these skills. Methods Using a BCG assay for serum albumin, each student undertakes an eight week project analysing two levels of QC alongside ‘patient’ samples. Results are assessed using both single rules and Multirules. Concomitantly with the QC analyses, an EQA project is undertaken; students analyse two EQA samples, twice in the semester. Results are submitted using cloud software and data for the full ‘peer group’ returned to students in spreadsheets and incomplete Youden plots. Youden plots are completed with target values and calculated ALP values and analysed for ‘lab’ and method performance. The method has a low-level positive bias, which leads to the need to investigate an alternative method. Building directly on the EQA of the first project and using the scenario of a lab that services renal patients, students undertake a method validation comparing BCP and BCG assays in another eight-week project. Precision and patient comparison studies allow students to assess whether the BCP method addresses the proportional bias of the BCG method and overall is a ‘better’ alternative method for analysing serum albumin, accounting for pragmatic factors, such as cost, as well as performance characteristics. Results Students develop understanding of the purpose and importance of QC and EQA in delivering quality results, the need to optimise testing to deliver quality results and importantly, a working knowledge of the analyses that go into ensuring this quality. In parallel to developing these key workplace competencies, students become confident, competent practitioners, able to pipette accurately and precisely and organise themselves in a busy, time pressured work environment.

The growth and productivity of ‘Festival’ strawberry plants growing in a subtropical environment

Experiments were conducted over 5 years to understand the seasonal phenology of bare-rooted ?Festival? strawberry plants (Fragaria ?ananassa) growing at Nambour in southeastern Queensland, Australia. Yields ranged from 661 to 966 g/plant, and average seasonal fruit fresh weight ranged from 15 to 18 g. The growth of the leaves, crowns, roots, flowers and fruit over time followed a linear or sigmoid pattern. Maximum values of leaf, crown and root dry weight towards the end of the growing season about 190 days after planting were 30, 15 and 7 g/plant, respectively. The rates of leaf and crown growth were lower than those achieved in California under a Mediterranean climate. There were strong relationships between the allocation of dry matter to the leaves, crowns and roots and plant dry weight. Allocation to the leaves, and especially to the crowns and roots, declined as the plants grew. The number of fruit/plant increased initially over time with a decline later in the season. Average fruit fresh weight was generally higher early in the season and then declined as fruit production increased. There were strong relationships between the growth of the whole plant and the growth of the flowers and immature fruit, and leaf expansion, across the growing season and across the 5 different years. These results indicate that seasonal growth and potential productivity were strongly linked to the expansion of the leaves in this environment.

Monitoring healing progression and characterizing the mechanical environment in preclinical models for bone tissue engineering

The treatment of large segmental bone defects remains a significant clinical challenge. Due to limitations surrounding the use of bone grafts, tissue-engineered constructs for the repair of large bone defects could offer an alternative. Before translation of any newly developed tissue engineering (TE) approach to the clinic, efficacy of the treatment must be shown in a validated preclinical large animal model. Currently, biomechanical testing, histology, and microcomputed tomography are performed to assess the quality and quantity of the regenerated bone. However, in vivo monitoring of the progression of healing is seldom performed, which could reveal important information regarding time to restoration of mechanical function and acceleration of regeneration. Furthermore, since the mechanical environment is known to influence bone regeneration, and limb loading of the animals can poorly be controlled, characterizing activity and load history could provide the ability to explain variability in the acquired data sets and potentially outliers based on abnormal loading. Many approaches have been devised to monitor the progression of healing and characterize the mechanical environment in fracture healing studies. In this article, we review previous methods and share results of recent work of our group toward developing and implementing a comprehensive biomechanical monitoring system to study bone regeneration in preclinical TE studies.

Development of analytical techniques for studies on dispersion of actinides in the environment and characterization of environmental radioactive particles

Radioactive particles from three locations were investigated for elemental composition, oxidation states of matrix elements, and origin. Instrumental techniques applied to the task were scanning electron microscopy, X-ray and gamma-ray spectrometry, secondary ion mass spectrometry, and synchrotron radiation based microanalytical techniques comprising X-ray fluorescence spectrometry, X-ray fluorescence tomography, and X-ray absorption near-edge structure spectroscopy. Uranium-containing low activity particles collected from Irish Sea sediments were characterized in terms of composition and distribution of matrix elements and the oxidation states of uranium. Indications of the origin were obtained from the intensity ratios and the presence of thorium, uranium, and plutonium. Uranium in the particles was found to exist mostly as U(IV). Studies on plutonium particles from Runit Island (Marshall Islands) soil indicated that the samples were weapon fuel fragments originating from two separate detonations: a safety test and a low-yield test. The plutonium in the particles was found to be of similar age. The distribution and oxidation states of uranium and plutonium in the matrix of weapon fuel particles from Thule (Greenland) sediments were investigated. The variations in intensity ratios observed with different techniques indicated more than one origin. Uranium in particle matrixes was mostly U(IV), but plutonium existed in some particles mainly as Pu(IV), and in others mainly as oxidized Pu(VI). The results demonstrated that the various techniques were effectively applied in the characterization of environmental radioactive particles. An on-line method was developed for separating americium from environmental samples. The procedure utilizes extraction chromatography to separate americium from light lanthanides, and cation exchange to concentrate americium before the final separation in an ion chromatography column. The separated radiochemically pure americium fraction is measured by alpha spectrometry. The method was tested with certified sediment and soil samples and found to be applicable for the analysis of environmental samples containing a wide range of Am-241 activity. Proceeding from the on-line method developed for americium, a method was also developed for separating plutonium and americium. Plutonium is reduced to Pu(III), and separated together with Am(III) throughout the procedure. Pu(III) and Am(III) are eluted from the ion chromatography column as anionic dipicolinate and oxalate complexes, respectively, and measured by alpha spectrometry.

Rapid assessment of genotype-by-environment interactions and heritability for growth rate in aquaculture species using in vitro fertilisation and DNA tagging

Commercial environments may receive only a fraction of expected genetic gains for growth rate as predicted from the selection environment. This fraction is result of undesirable genotype-by-environment interactions (GxE) and measured by the genetic correlation (rg) of growth between environments. Rapid estimates of genetic correlation achieved in one generation are notoriously difficult to estimate with precision. A new design is proposed where genetic correlations can be estimated by utilising artificial mating from cryopreserved semen and unfertilised eggs stripped from a single female. We compare a traditional phenotype analysis of growth to a threshold model where only the largest fish are genotyped for sire identification. The threshold model was robust to differences in family mortality differing up to 30%. The design is unique as it negates potential re-ranking of families caused by an interaction between common maternal environmental effects and growing environment. The design is suitable for rapid assessment of GxE over one generation with a true 0.70 genetic correlation yielding standard errors as low as 0.07. Different design scenarios were tested for bias and accuracy with a range of heritability values, number of half-sib families created, number of progeny within each full-sib family, number of fish genotyped, number of fish stocked, differing family survival rates and at various simulated genetic correlation levels.

Age, Occupational Strain, and Well-Being: A Person-Environment Fit Perspective

We develop a conceptual model, based on person-environment fit theory, which explains how employee age affects occupational strain and well-being. We begin by explaining how age directly affects different dimensions of objective and subjective P-E fit. Next, we illustrate how age can moderate the relationship between objective P-E fit and subjective P-E fit. Third, we discuss how age can moderate the relationships between P-E fit, on one hand, and occupational strain and well-being on the other. Fourth, we explain how age can impact occupational strain and well-being directly independent of P-E fit. The chapter concludes with implications for future research and practice.