Comportamiento tribomecánico de sistemas de sustrato: recubrimiento duros

En aplicaciones como la conformación en frío, donde los metales duros recubiertos con películas de naturaleza cerámica son ampliamente empleados, la existencia de un contacto mecánico repetitivo induce tensiones Hertzianas y origina el fallo por fatiga. En este trabajo, se investigan diversos recubrimientos cerámicos depositados por deposición física desde fase vapor sobre calidades diferentes de metal duro y un acero rápido pulvimetalúrgico para evaluar sus respectivas respuesta al contacto y comportamiento a fatiga. El trabajo experimental incluye la caracterización de los sistemas mediante ensayos de rayado y nanoindentación y la evaluación de las curvas tensión-deformación de indentación esférica de los sustratos, tanto desnudos como recubiertos, poniendo especial atención en determinar las tensiones de contacto críticas asociadas a la deformación plástica y a la aparición de grietas circulares en la superficie recubierta. A este estudio, le siguen numerosos ensayos a fatiga a cargas inferiores a aquéllas identificadas como críticas bajo carga monotónica y para un número de ciclos comprendido entre 1.000 y 1.000.000 de ciclos. Los resultados experimentales indican que las películas cerámicas no parecen desempeñar un papel relevante en la aparición de la cedencia plástica, siendo la deformación plástica global controlada por la deformación del sustrato. No obstante, para tensiones elevadas de indentación durante el régimen plástico, existe la aparición de grietas circulares en los recubrimientos cerámicos. Además, la aparición de las mismas es sensible a la fatiga por contacto. Este análisis mecánico se complementa con una inspección detallada del daño generado en profundidad y superficie.

Factors Involved in Schistosoma mansoni Infection, in Rural Areas of Northeast Brazil

Two contiguous villages in Tracunhaém county (State of Pernambuco), endemic for schistosomiasis, were studied: Itapinassu (138 inhabitants) and São Joaquim (91 inhabitants). Agriculture predominates in the former region while ceramics is the main activity in the latter. Although no statistical difference was found regarding prevalence, severe infection (>400 epg) predominated in Itapinassu, probably related to the kind of occupation. No association was found between parasite burden and severity of disease, in spite of the high infection rates for Schistosoma mansoni in both communities (approx. 60%). Typical epidemiological features of schistosomiasis such as age-related prevalences and intensities of infection (high in children, low in adults) were also mutual characteristics. Nutritional status determined through anthropometric evaluation was carried out by measuring specific anthropometric indicators. A deficit of energy intake, as well as vitamin A and riboflavin deficiencies were detected. The prevalence of moderate or severe undernutrition in patients under 18 years old was 21.9% in Itapinassu and 24.1% in São Joaquim. In this group an association was found between prevalence of schistosomiasis and chronic undernutrition. Similarly, for patients over 18 year old the prevalence of undernutrition was higher than 20%. However, in this case no association between nutritional status and either prevalence of schistosomiasis or parasite burden could be detected. The two communities had not been treated for eight years.

Desenvolupament ràpid de llocs web

Aquesta és la realització del TFC en l'àrea de .NET de en quant al "Desenvolupament ràpid de llocs web". L'objectiu global del projecte és explorar la tecnologia WebMatrix de Microsoft, proveint una web per la PYME Cerámicas Alba, dedicada a les reformes i la venda al detall de mobiliari i ceràmiques per a banys i cuines. La PYME necessita amb certa urgència una web per publicar d'una manera ràpida informació de l'empresa. La web tindrà dues parts: back-end i el front-end. El back-end pretén permetre al client administrar les parts dinàmiques de la web com ara productes i dades de l'empresa. El front-end serà la part visible per els usuaris d'Internet. Com a proveïdor de la web, és requisit disposar d'eines i un entorn per a generar i publicar la web, WebMatrix és una tecnologia de Microsoft que s'hi ajusta i la definida en el TFC.

La cascarilla cerámica y su uso innovador

The ceramic shell is a material mainly used for making foundry molds. This research demonstrates that ceramic shell can be used for making sculptures with exceptional definition in its finish. The research has identified a number of advantages of the material to meet the challenges of an artist during the making of a sculpture. The research has been developed in six stages: In the first stage data were collected from the chaff as the process material. This was the starting point for research. In the second stage, we have set the appropriate composition of the slurry, both in percentage and type of binder, and firing curve. To this end, we evaluated the application characteristics, thickness, drying, mechanical strength, the reduction coefficient and porosity. In the third stage it was observed that the husk is suitable for all types of materials acting as support. It was also found that the slurry can be used with various sculptural processes: modeling, molding using silicone or plaster mold, shuttering, with internal metal frame, and so on. In addition, we have established methods to repair and modify the husk by hand and power tools. In the fourth stage we have found ways to modify the surface of the husk with other minerals that affect the structure: introduction of filing of copper, bronze and iron in the slurry ceramics, different staining procedure in hot or cold, by enamel slip, and so on. In the fifth stage sculptures were made using the methods established in the previous stages, to verify this hypothesis. The sixth stage, which is annexed, contains a new method to process the ceramic shell as a mold in casting that emerged from the proven methods in the investigation.

Grain size analyses in tin-lead glazes based on 2d-sections

A problem in the archaeometric classification of Catalan Renaissance pottery is the fact, thatthe clay supply of the pottery workshops was centrally organized by guilds, and thereforeusually all potters of a single production centre produced chemically similar ceramics.However, analysing the glazes of the ware usually a large number of inclusions in the glaze isfound, which reveal technological differences between single workshops. These inclusionshave been used by the potters in order to opacify the transparent glaze and to achieve a whitebackground for further decoration.In order to distinguish different technological preparation procedures of the single workshops,at a Scanning Electron Microscope the chemical composition of those inclusions as well astheir size in the two-dimensional cut is recorded. Based on the latter, a frequency distributionof the apparent diameters is estimated for each sample and type of inclusion.Following an approach by S.D. Wicksell (1925), it is principally possible to transform thedistributions of the apparent 2D-diameters back to those of the true three-dimensional bodies.The applicability of this approach and its practical problems are examined using differentways of kernel density estimation and Monte-Carlo tests of the methodology. Finally, it istested in how far the obtained frequency distributions can be used to classify the pottery

Magnetic and in vitro heating properties of implants formed in situ from injectable formulations and containing superparamagnetic iron oxide nanoparticles (SPIONs) embedded in silica microparticles for magnetically induced local hyperthermia

The biological and therapeutic responses to hyperthermia, when it is envisaged as an anti-tumor treatment modality, are complex and variable. Heat delivery plays a critical role and is counteracted by more or less efficient body cooling, which is largely mediated by blood flow. In the case of magnetically mediated modality, the delivery of the magnetic particles, most often superparamagnetic iron oxide nanoparticles (SPIONs), is also critically involved. We focus here on the magnetic characterization of two injectable formulations able to gel in situ and entrap silica microparticles embedding SPIONs. These formulations have previously shown suitable syringeability and intratumoral distribution in vivo. The first formulation is based on alginate, and the second on a poly(ethylene-co-vinyl alcohol) (EVAL). Here we investigated the magnetic properties and heating capacities in an alternating magnetic field (141 kHz, 12 mT) for implants with increasing concentrations of magnetic microparticles. We found that the magnetic properties of the magnetic microparticles were preserved using the formulation and in the wet implant at 37 degrees C, as in vivo. Using two orthogonal methods, a common SLP (20 Wg(-1)) was found after weighting by magnetic microparticle fraction, suggesting that both formulations are able to properly carry the magnetic microparticles in situ while preserving their magnetic properties and heating capacities. (C) 2010 Elsevier B.V. All rights reserved.

Gènere i identitats en la construcció d'una comunitat colonial a Empúries (segles VI-V a.C.)

El projecte de recerca ha analitzat la complexitat ètnica, social i de gènere de l’assentament colonial d’Empúries a partir d’un exhaustiu estudi contextual dels materials ceràmics d’ús quotidià provinents de diferents sectors excavats als anys vuitanta a la Neàpolis empuritana (N-7000, N-5000 i N-1000). Aquests sectors datats els segles V i IV a.C., corresponen a un moment en el qual s’està construint una identitat colonial diferenciada en l’espai emporità. La comparació dels aixovars domèstics usats quotidianament pels habitants d’aquest tres sectors situats en punts distants de la Neàpolis mostra que estem davant d’un assentament colonial molt heterogeni, on conflueixen materialitats, tradicions tecnològiques i pràctiques quotidianes iberes, gregues i híbrides. Els estudis de materials confirmen que no va existir una segregació espacial entre poblacions d’origen grec i iber en aquest assentament i suggereixen la cohabitació de gent –tant d’homes com de dones- d’origen grec i iber a les diferents àrees estudiades d’aquest assentament portuari. En el registre material ceràmic de totes les zones estudiades s’observa un predomini dels productes ceràmics de tradició grega (colonials o àtics) en els serveis de taula, però no així en els estris utilitzats a la cuina, que són majoritàriament de tradició ibera. També els materials ceràmics relacionats amb l’emmagatzematge domèstic i amb el transport i el comerç (àmfores) són predominantment ibers. Aquest patró suggereix que els ibers que van cohabitar amb els grecs al port emporità no van assumir en tots els casos posicions subalternes, sinó que tingueren un rol rellevant en la gestió econòmica i comercial d’aquest espai portuari.

Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load.

OBJECTIVES: (1) To evaluate the changes in surface roughness and gloss after simulated toothbrushing of 9 composite materials and 2 ceramic materials in relation to brushing time and load in vitro; (2) to assess the relationship between surface gloss and surface roughness. METHODS: Eight flat specimens of composite materials (microfilled: Adoro, Filtek Supreme, Heliomolar; microhybrid: Four Seasons, Tetric EvoCeram; hybrid: Compoglass F, Targis, Tetric Ceram; macrohybrid: Grandio), two ceramic materials (IPS d.SIGN and IPS Empress polished) were fabricated according to the manufacturer's instructions and optimally polished with up to 4000 grit SiC. The specimens were subjected to a toothbrushing (TB) simulation device (Willytec) with rotating movements, toothpaste slurry and at three different loads (100g/250g/350g). At hourly intervals from 1h to 10h TB, mean surface roughness Ra was measured with an optical sensor and the surface gloss (Gl) with a glossmeter. Statistical analysis was performed for log-transformed Ra data applying two-way ANOVA to evaluate the interaction between load and material and load and brushing time. RESULTS: There was a significant interaction between material and load as well as between load and brushing time (p<0.0001). The microhybrid and hybrid materials demonstrated more surface deterioration with higher loads, whereas with the microfilled resins Heliomolar and Adoro it was vice versa. For ceramic materials, no or little deterioration was observed over time and independent of the load. The ceramic materials and 3 of the composite materials (roughness) showed no further deterioration after 5h of toothbrushing. Mean surface gloss was the parameter which discriminated best between the materials, followed by mean surface roughness Ra. There was a strong correlation between surface gloss and surface roughness for all the materials except the ceramics. The evaluation of the deterioration curves of individual specimens revealed a more or less synchronous course suspecting hinting specific external conditions and not showing the true variability in relation to the tested material. SIGNIFICANCE: The surface roughness and gloss of dental materials changes with brushing time and load and thus results in different material rankings. Apart from Grandio, the hybrid composite resins were more prone to surface changes than microfilled composites. The deterioration potential of a composite material can be quickly assessed by measuring surface gloss. For this purpose, a brushing time of 10h (=72,000 strokes) is needed. In further comparative studies, specimens of different materials should be tested in one series to estimate the true variability.

A estação arqueológica de Salamansa (ilha de São Vicente, República de Cabo Verde)

Apresentam‑se os principais resultados obtidos nas duas missões arqueológicas patrocinadas pelo Centro Português de Actividades Subaquáticas (CPAS) à ilha de São Vicente (República de Cabo Verde), em 1998 e em 2005. Em 1998, confirmou‑se o efectivo interesse arqueológico do sítio, localizado sobre o mar, em local abrigado da vasta baía de Salamansa, situada na parte setentrional da ilha, tendo‑se registado a respectiva extensão e estratigrafia e procedido à colheita de amostras para datação. Embora os resultados dessa campanha tivessem sido publicados, indicando estação de carácter habitacional, revelada pela notável acumulação de conchas, acompanhada de abundantes fragmentos de cerâmicas manuais, de produção africana, mantinha‑se indefinida a sua verdadeira natureza. Impunha‑se, assim, proceder à escavação integral da área que ainda subsistia da estação — sujeita de forma contínua a forte erosão marinha — bem como à colheita de novos materiais para datação, de forma a confirmar as conclusões preliminares anteriormente obtidas, objectivos que se concretizaram em 2005. Deste modo, foi possível concluir que, contrariando a hipótese, de início considerada, de poder corresponder a um testemunho da ocupação da ilha em época anterior à chegada dos Portugueses — hipótese que já as primeiras datas de radiocarbono contradiziam — se trata de um sítio onde uma unidade habitacional construída por muros de pedra seca, de planta ortogonal, revela inspiração europeia, aliás sublinhada pelos materiais exumados, onde estão representados produtos com tal origem, como cachimbos de caulino, vidros, faianças portuguesas, e projécteis de armas de fogo, a par de objectos oriundos do Extremo Oriente, num quadro dominado pelas produções cerâmicas africanas. Esta situação evidencia um estabelecimento cuja ocupação se centrou no século XVII, conforme indicam os materiais recolhidos e os resultados das datações obtidas, francamente aberto aos contactos de longa distância, apesar do isolamento do local escolhido. Os restos faunísticos recolhidos, com a presença deburro e de boi, sugerem um estacionamento sedentário, sendo a alimentação assegurada essencialmente pela captura de tartarugas, pela pesca e pela recolecção de moluscos marinhos (especialmente grandes lapas) e complementada pelo consumo de cabra, que poderia ser doméstica ou caçada, dado o estado selvagem a que retornou ali esta espécie. na última parte do trabalho, discutem‑se as diversas hipóteses susceptíveis de explicar esta estação — desde um entreposto comercial relacionado com a exploração agro‑pecuária da ilha de Santo Antão, passando por pequeno estabelecimento especializado de apoio à navegação, com a produção de carne salgada de tartaruga, até ter constituído refúgio relacionado com a intensa pirataria vigente à época no arquipélago, tendo presente os elementos históricos conhecidos, que, aliás, indicam que o início da ocupação permanente de São Vicente só se produziu a partir da segunda década do século XIX. Seja como for, a forte componente cultural africana revelada pelo espólio destes primeiros ocupantes da ilha expressa‑se também pelos rituais que terão envolvido o abandono do estabelecimento, com o enterramento de dois vasos emborcados sob o chão da habitação explorada, e a deposição de uma pequena taça, nas mesmas circunstâncias, junto à parede da mesma, do lado externo.

Early Iron Age Pottery: A Quantitative Approach, Proceedings of the International Round Table organized by the Swiss School of Archaeology in Greece (Athens, November 28-30, 2008)

Quantitative approaches in ceramology are gaining ground in excavation reports, archaeological publications and thematic studies. Hence, a wide variety of methods are being used depending on the researchers' theoretical premise, the type of material which is examined, the context of discovery and the questions that are addressed. The round table that took place in Athens on November 2008 was intended to offer the participants the opportunity to present a selection of case studies on the basis of which methodological approaches were discussed. The aim was to define a set of guidelines for quantification that would prove to be of use to all researchers. Contents: 1) Introduction (Samuel Verdan); 2) Isthmia and beyond. How can quantification help the analysis of EIA sanctuary deposits? (Catherine Morgan); 3) Approaching aspects of cult practice and ethnicity in Early Iron Age Ephesos using quantitative analysis of a Protogeometric deposit from the Artemision (Michael Kerschner); 4) Development of a ceramic cultic assemblage: Analyzing pottery from Late Helladic IIIC through Late Geometric Kalapodi (Ivonne Kaiser, Laura-Concetta Rizzotto, Sara Strack); 5) 'Erfahrungsbericht' of application of different quantitative methods at Kalapodi (Sara Strack); 6) The Early Iron Age sanctuary at Olympia: counting sherds from the Pelopion excavations (1987-1996) (Birgitta Eder); 7) L'aire du pilier des Rhodiens à Delphes: Essai de quantification du mobilier (Jean-Marc Luce); 8) A new approach in ceramic statistical analyses: Pit 13 on Xeropolis at Lefkandi (David A. Mitchell, Irene S. Lemos); 9) Households and workshops at Early Iron Age Oropos: A quantitative approach of the fine, wheel-made pottery (Vicky Vlachou); 10) Counting sherds at Sindos: Pottery consumption and construction of identities in the Iron Age (Stefanos Gimatzidis); 11) Analyse quantitative du mobilier céramique des fouilles de Xombourgo à Ténos et le cas des supports de caisson (Jean-Sébastien Gros); 12) Defining a typology of pottery from Gortyn: The material from a pottery workshop pit, (Emanuela Santaniello); 13) Quantification of ceramics from Early Iron Age tombs (Antonis Kotsonas); 14) Quantitative analysis of the pottery from the Early Iron Age necropolis of Tsikalario on Naxos (Xenia Charalambidou); 15) Finding the Early Iron Age in field survey: Two case studies from Boeotia and Magnesia (Vladimir Stissi); 16) Pottery quantification: Some guidelines (Samuel Verdan)

Chemical variability in clays and pottery from a traditional cooking pot production village: Testing assumptions in Pereruela

This paper explores analytically the contemporary pottery-making community of Pereruela (north-west Spain) that produces cooking pots from a mixture of red clay and kaolin. Analyses by different techniques (XRF, NAA, XRD, SEM and petrography) showed an extremely high variability for cooking ware pottery produced in a single production centre, by the same technology and using local clays. The main source of chemical variation is related to the use of different red clays and the presence of non-normally distributed inclusions of monazite. These two factors induce a high chemical variability, not only in the output of a single production centre, but even in the paste of a single pot, to an extent to which chemical compositions from one"workshop", or even one"pot", could be classified as having different provenances. The implications for the chemical characterization and for provenance studies of archaeological ceramics are addressed.

Analcime crystallization and compositional profiles - Comparing approaches to detect post-depositional alterations in archaeological pottery

The approaches of comparative studies and profile measurements, often used in order to detect post-depositional alterations of ceramics, have been applied simultaneously to two sets of Roman pottery, both of which include altered individuals. As analytical techniques, Neutron Activation Analysis and X-Ray Diffraction have been used. Both approaches lead to substantially different results. This shows that they detect different levels of alteration and should complement each other rather than being used exclusively. For the special process of a glassy phase decomposition followed by a crystallization of the Na-zeolite analcime, the results suggest that it changes high-fired calcareous pottery rapidly, and so fundamentally that the results of various archaeometric techniques can be severely disturbed.

Un conjunt de materials d'època tardo-republicana de la ciutat romana de Pollentia (Alcúdia, Mallorca)

El pou D 18, situat a la part sud-oest de la zona coneguda del forum de Pollentia, fou amortitzat en el segon quart del segle 1 a.C. EIs materials que formaven part del farciment constitueixen un conjunt tancat representatiu sobretot deIs tipus ceramics locals i d'importació utilitzats en aquesta epoca. El volum principal d'importacions correspon als productes italics, seguits a gran distancia pels materials púnics, iberics i egeus.

Designing and testing of a sensor based on a magnetoresistive manganese perovskite thick film

In this paper we report on the growth of thick films of magnetoresistive La2/3Sr1/3MnO3 by using spray and screen printing techniques on various substrates (Al2O3 and ZrO2). The growth conditions are explored in order to optimize the microstructure of the films. The films display a room-temperature magnetoresistance of 0.0012%/Oe in the 1 kOe field region. A magnetic sensor is described and tested.

Production of nanometric particles in radio frequency glow discharges in mixtures of silane and methane

The formation of silicon particles in rf glow discharges has attracted attention due to their effect as a contaminant during film deposition or etching. However, silicon and silicon alloy powders produced by plasma¿enhanced chemical vapor deposition (PECVD) are promising new materials for sintering ceramics, for making nanoscale filters, or for supporting catalytic surfaces. Common characteristics of these powders are their high purity and the easy control of their stoichiometry through the composition of the precursor gas mixture. Plasma parameters also influence their structure. Nanometric powders of silicon¿carbon alloys exhibiting microstructural properties such as large hydrogen content and high surface/volume ratio have been produced in a PECVD reactor using mixtures of silane and methane at low pressure (-1 Torr) and low frequency square¿wave modulated rf power (13.56 MHz). The a¿Si1¿xCx:H powders were obtained from different precursor gas mixtures, from R=0.05 to R=9, where R=[SiH4]/([SiH4]+[CH4]). The structure of the a¿Si1¿xCx:H powder was analyzed by several techniques. The particles appeared agglomerated, with a wide size distribution between 5 and 100 nm. The silane/methane gas mixture determined the vibrational features of these powders in the infrared. Silicon-hydrogen groups were present for every gas composition, whereas carbon¿hydrogen and silicon¿carbon bonds appeared in methane¿rich mixtures (R-0.6). The thermal desorption of hydrogen revealed two main evolutions at about 375 and 660¿°C that were ascribed to hydrogen bonded to silicon and carbon, respectively. The estimated hydrogen atom concentration in the sample was about 50%.