Diagnóstico espaço-temporal da ocorrência de herbicidas nas águas superficiais e sedimentos do Rio Corumbataí e principais afluentes

Residues of herbicides from sugarcane were monitored in waters and sediments of Corumbataí River and tributaries. Ametryne, atrazine, simazine, hexazinone, glyphosate, and clomazone were detected in water samples, with negligible levels of ametryne and glyphosate in sediment samples. The area of recharge of the Guarani aquifer presented the highest triazine and clomazone levels. The triazines were detected at higher levels, with atrazine above Brazil's potability and quality standards. Total herbicide levels at some sampling points were 13 times higher than the European Community potability limit. There is no Brazilian standard for ametryne, although the risk is larger due to ametryne's higher toxicity for the aquatic biota.

Training system for conceptual design and evaluation for wastewater treatment

Rising population, rapid urbanisation and growing industrialisation have severely stressed water quality and its availability in Malawi. In addition, financial and institutional problems and the expanding agro industry have aggravated this problem. The situation is worsened by depleting water resources and pollution from untreated sewage and industrial effluent. The increasing scarcity of clean water calls for the need for appropriate management of available water resources. There is also demand for a training system for conceptual design and evaluation for wastewater treatment in order to build the capacity for technical service providers and environmental practitioners in the country. It is predicted that Malawi will face a water stress situation by 2025. In the city of Blantyre, this situation is aggravated by the serious pollution threat from the grossly inadequate sewage treatment capacity. This capacity is only 23.5% of the wastewater being generated presently. In addition, limited or non-existent industrial effluent treatment has contributed to the severe water quality degradation. This situation poses a threat to the ecologically fragile and sensitive receiving water courses within the city. This water is used for domestic purposes further downstream. This manuscript outlines the legal and policy framework for wastewater treatment in Malawi. The manuscript also evaluates the existing wastewater treatment systems in Blantyre. This evaluation aims at determining if the effluent levels at the municipal plants conform to existing standards and guidelines and other associated policy and regulatory frameworks. The raw material at all the three municipal plants is sewage. The typical wastewater parameters are Biochemical Oxygen Demand (BOD5), Chemical Oxygen Demand (COD), and Total Suspended Solids (TSS). The treatment target is BOD5, COD, and TSS reduction. Typical wastewater parameters at the wastewater treatment plant at MDW&S textile and garments factory are BOD5 and COD. The treatment target is to reduce BOD5 and COD. The manuscript further evaluates a design approach of the three municipal wastewater treatment plants in the city and the wastewater treatment plant at Mapeto David Whitehead & Sons (MDW&S) textile and garments factory. This evaluation utilises case-based design and case-based reasoning principles in the ED-WAVE tool to determine if there is potential for the tool in Blantyre. The manuscript finally evaluates the technology selection process for appropriate wastewater treatment systems for the city of Blantyre. The criteria for selection of appropriate wastewater treatment systems are discussed. Decision support tools and the decision tree making process for technology selection are also discussed. Based on the treatment targets and design criteria at the eight cases evaluated in this manuscript in reference to similar cases in the ED-WAVE tool, this work confirms the practical use of case-based design and case-based reasoning principles in the ED-WAVE tool in the design and evaluation of wastewater treatment 6 systems in sub-Sahara Africa, using Blantyre, Malawi, as the case study area. After encountering a new situation, already collected decision scenarios (cases) are invoked and modified in order to arrive at a particular design alternative. What is necessary, however, is to appropriately modify the case arrived at through the Case Study Manager in order to come up with a design appropriate to the local situation taking into account technical, socio-economic and environmental aspects. This work provides a training system for conceptual design and evaluation for wastewater treatment.

Water treatment by multistage filtration system with natural coagulant from Moringa oleifera seeds

This study presents an evaluation of a pilot multistage filtration system (MSF) with different dosages, 131 mg L-1 and 106 mg L-1, of the natural coagulant extracted from Moringa oleifera seeds in pre-filtration and slow filtration stages, respectively. The system was comprised by a dynamic pre-filter unit, two upflow filters in parallel and four slow filters in parallel, and in one of the four filters had the filter media altered. The performance of the system was evaluated by monitoring some water quality parameters such as: turbidity, apparent color and slow filter load loss. The stages that have received the coagulant solution had better treatment efficiency compared with the steps without it. However, the direct application of the coagulant solution in the slow filter caused rapid clogging of the non-woven blanket and shorter career length.

Management strategies of saline water on morphometric characteristics of melon cultivars

It was to aimed it to investigate effects of various saline water use strategies on melon production and quality of two cultivars (Cucumis melo L., Sancho - C1 and Medellín - C2. The plants were irrigated with water of low (S1 = 0.61 dS m-1) and high (S2 = 4.78 dS m-1) salinity levels, during each crop stage: S1S1S2S2 - T1; S2S1S2S2 - T2; S2S2S1S2 - T3. The 1st, 2nd, 3rd and 4th terms of these sequences correspond to initial growth, flowering, fruit ripening and harvest phenological stages, respectively. Additionally, there was irrigation rotation during all cycle, with water S1 during two days followed by S2 for one day (S1 2 dias + S2 1 dia - T4) and irrigation with non-salt water S2 during all cycle - T5. Moreover, we used as control, the irrigation water at 3.2 dS m-1 resulting from water mixture of S1 and S2 - T6 (farm used irrigation management). The experiment was carried out in Pedra Preta Farm, in Mossoró, RN, using an entire randomized block statistical design in a 6x2 subdivided plot scheme with four replications. Saline water irrigation at initial growth stage reduces leaf area and shoot dry phytomass of Sancho and Medellín melon cultivars. The irrigation by T4 provided the highest phytomass production of fruits at 48 DAS, reducing in 33% of good quality water in irrigation.

Wet bulbs from the subsurface drip irrigation with water supply and treated sewage effluent

The use of treated sewage effluent (TSE) combined with the subsurface drip irrigation (SDI) method in agriculture can decrease the costs of agricultural production, in attempts to fertigate crops more efficiently. In this study it was compared the dimensions of the wet bulb formed by the application of TSE and municipal water supply (MWS) in an Oxisoil. We have evaluated the effect of water quality and discharge between drippers used in sugarcane crop. Three trenches were opened and 21 three-rod TDR probes were setup in a mesh and a dripper was buried at 0.30 m, for each constant discharge of 1.0 L h-1and 1.6 L h-1. Comparing results from different wetted soil profiles it was observed that the vertical and horizontal dimensions of the wet bulb are similar for both MWS and TSE, being peculiars according to the discharges used and volume applied. Regardless the water quality, an increase of 60% in discharge decreased the deepest infiltration.

Assessing the Environmental Value of Water Treatment Solutions in the Mining Industry

Environmental accountability has become a major source of competitive advantage for industrial companies, because customers consider it as relevant buying criterion. However, in order to leverage their environmental responsibility, industrial suppliers have to be able to demonstrate the environmental value of their products and services, which is also the aim of Kemira, a global water chemistry company considered in this study. The aim of this thesis is to develop a tool which Kemira can use to assess the environmental value of their solutions for the customer companies in mining industry. This study answers to questions on what kinds of methods to assess environmental impacts exist, and what kind of tool could be used to assess the environmental value of Kemira’s water treatment solutions. The environmental impacts of mining activities vary greatly between different mines. Generally the major impacts include the water related issues and wastes. Energy consumption is also a significant environmental aspect. Water related issues include water consumption and impacts in water quality. There are several methods to assess environmental impacts, for example life cycle assessment, eco-efficiency tools, footprint calculations and process simulation. In addition the corresponding financial value may be estimated utilizing monetary assessment methods. Some of the industrial companies considered in the analysis of industry best practices use environmental and sustainability assessments. Based on the theoretical research and conducted interviews, an Excel based tool utilizing reference data on previous customer cases and customer specific test results was considered to be most suitable to assess the environmental value of Kemira’s solutions. The tool can be used to demonstrate the functionality of Kemira’s solutions in customers’ processes, their impacts in other process parameters and their environmental and financial aspects. In the future, the tool may be applied to fit also Kemira’s other segments, not only mining industry.

Intended Quality: Relationships between Development, Testing and Quality

An empirical study was conducted in the area of software engineering to study relationships between development, testing and intended software quality. International standards served as a starting point of the study. For analysis a round of interviews was kept and transcribed. It was found that interaction between humans is critical, especially in transferring knowledge and standards’ processes. The standards are communicated through interaction and learning processes are involved before compliance. One of the results was that testing is the key to sufficient quality. The outcome was that successful interaction, sufficient testing and compliance with the standards combined with good motivation may provide most repeatable intended quality.

Software development methods and quality assurance: Special focus on South Korea

The purpose of this study was to explore software development methods and quality assurance practices used by South Korean software industry. Empirical data was collected by conducting a survey that focused on three main parts: software life cycle models and methods, software quality assurance including quality standards, the strengths and weaknesses of South Korean software industry. The results of the completed survey showed that the use of agile methods is slightly surpassing the use of traditional software development methods. The survey also revealed an interesting result that almost half of the South Korean companies do not use any software quality assurance plan in their projects. For the state of South Korean software industry large number of the respondents thought that despite of the weakness, the status of software development in South Korea will improve in the future.

Characterization of maturity and quality of Brazilian apirenic grapes in the São Francisco river Valley

The objective of this study was to characterize and correlate maturity and quality of the first varieties of Brazilian seedless grapes 'BRS Clara', 'BRS Linda', 'BRS Morena', and 'Advanced Selection 8' compared with the American variety 'Crimson Seedless' in compliance with the Brazilian Normative/2002 and export standards Advanced Selection 8' is dark reddish, has large clusters, and is a very large ellipsoid berry; 'BRS Morena' is black with medium sized clusters and large berry shaped as ellipsoid to globoid; 'BRS Linda' is light green and has large sized clusters; 'Crimson' is pink and has small clusters with berries varying from medium to large sizes and ellipsoid shaped; and 'BRS Clara' is green yellowish has medium sized clusters and small berry of elongated ellipsoid shape. All varieties evaluated meet the standard for domestic market established as berry size minimum diameter 12 mm. 'BRS Clara' does not meet the export requirements of diameter. Berries of the red grapes 'BRS Morena' and 'Crimson Seedless' are firmer. The pH, titratable acidity, and soluble solids meet the official standards. Larger clusters are less acidic and present higher soluble solids/titratable acidity ratios implying that they are the sweetest type when ripe.

Characterization of constituents, quality and stability of pomegranate seed oil (Punica granatum L.)

Abstract This study aimed to characterize pomegranate seed oil and evaluate its quality and stability parameters against those of linseed oil. The profile of fatty acids and phytosterols and the content of tocopherols were analyzed by gas chromatography and high performance liquid chromatography, respectively. The quality of both oils was assessed as recommended by the American Oil Chemists' Society (AOCS) and stability was evaluated using 2,2-diphenyl-1-picrylhydrazyl (DPPH), β-carotene bleaching (coupled oxidation of β-carotene/linoleic acid) and Rancimat® assays. While α-linolenic acid (52%) was the most abundant fatty acid in linseed oil (LO), punicic acid (55%) was highest in pomegranate seed oil (PSO). Tocopherols and phytosterols (175 and 539 mg/100 g, respectively) were greater in PSO than in LO (51 and 328 mg/100 g, respectively). Both oils met quality standards. The β-carotene bleaching and the DPPH assays showed greater oxidative stability for PSO than for LO. The Rancimat® method, on the other hand, indicated low stability for both oils.

Kohti vesiensuojelun aikaa; veden laadun muutokset eteläisimmällä Saimaalla

Työn tarkoituksena on ollut tutkia vesianalytiikan kehitystä Suomessa, arvioida rutiini-analytiikan luotettavuutta, selvittää eteläisimmän Saimaan jätevesikuormituksen kehitys ja siihen vaikuttaneet tekijät, laatia aikasarjat eräiden tutkimusalueen keskeisten veden laadun seurantapaikkojen veden laadun kehityksestä ja esittää keinoja veden laadun kehityksen kuvaa¬miseksi tiivistämällä suuri havaintomateriaali yksinkertaisiksi tunnusluvuiksi. Työssä käsiteltä¬vä aikajakso alkaa 1900-luvun alusta ja päättyy vuoteen 1998. Tutkimus on osa laajempaa ko¬konaisuutta. Tutkimusalue käsittää Vuoksen vesistön keskusjärven, Saimaan, eteläisimmät osat eli Pien-Saimaan, Suur-Saimaan, Vuoksen niskan ja Haapaveden altaat sekä vesistön purku¬-uoman, Vuoksen virran (ks. kuvat 5.1. ja 5.2.). Veden laatu alueen luonnontilaisilla alueilla on luokiteltavissa osin oligotrofiseksi, osin lievästi dysoligotrofiseksi. Sadan viimeisen vuoden aikana teollinen toiminta on muuttanut sitä voimakkaasti. Vesiensuojeluun on eteläisimmän Saimaan alueella investoitu yli 1,5 miljardia markka viimeisten noin 30 vuoden aikana. Investointien tuloksena kuormitus on laskenut oleellisesti 1960-luvun maksimikuormituksesta. Jätevesien purkuvesistön veden laatu on tänä aikana myös merkittävästi parantunut. Tämä on osoitettu veden laadun seurantatuloksista tehtyjen erilaisten tarkastelujen avulla (aikasarjadiagrammit, tilasto tarkastelut, indeksilukuluokitukset, PCA- ja PLS- ja DPLS- monimuuttujamallinnukset). Nykyisin veden laatu on lähes koko tutkimusalu¬eella vähintään tyydyttävä. Fysikaalis-kemiallisen veden laadun seurannan historia on Suomessa kansainvälisesti ja kansallisesti pitkä, ja Saimaalta voidaan veden laadun kehitystä arvioida luotettavasti 40 vuoden ajalta. Tutkimusmetodiikat vesitutkimusten pioneerimaissa ovat olleet samankaltaisia ja niiden perusteella on laadittu myös eurooppalaisen vedenlaadunseurannan suositukset. Vaikka tulevai¬suudessa vesistöä ja sen tilan kehitystä on tarkasteltava ekologisena kokonaisuutena, ei tätä voida tehdä ilman nykyisen kaltaista monitorointia. Teollisuuden jätevesikuormitus on laskenut neljännesvuosisadan aikana hyvin merkittä¬västi tavalla, joka vielä kymmenkunta vuotta sitten tuntui saavuttamattomalta. Saimaan. kuten muunkin Suomen metsäteollisuuden taso onkin kansainvälisesti korkea ja täyttää jo nyt kuormi¬tuksen suhteen lähes 2000-luvun alun BAT-tekniikan vaatimukset. Veden laatu ei kuitenkaan ole kuormitetuilla alueilla kaikkialla vielä hyvä, joten vesiensuojeluun on edelleen panostettava, kun tavoitteena on vesien hyvä ekologinen tila. Vesistöstä käsin tarkasteltuna hitaasti hajoavan orgaanisen aineen määrän vähentäminen vedestä on oltava seuraavana tavoitteena. Tätä tukee myös BAT-tekniikan tarkastelu.

Gaining Insights About Water: The Value of Surveys in First Nations Communities to Inform Water Governance

Knowledge of how water is perceived, used and managed in a community is critical to the endeavour of water governance. Surveys of individuals residing in a community offer a valuable avenue to gain information about several of these aspects of water. This paper draws upon experiences in three First Nation communities to explore the values of surveys to illuminate water issues and inform water decision-making. Findings from experiences with surveys in Six Nations of the Grand River, Mississaugas of the New Credit, and Oneida First Nation of the Thames reveal rich information about how surveys can provide insights about: the connection of individuals to the land, water and their community; reasons for valuing water; perceptions of water quality and issues surrounding water-related advisories; and, degree of satisfaction with water management and governance at different scales. Community partners reflected upon the findings of the survey for their community. Dialogue was then broadened across the cases as the partners offer benefits and challenges associated with the survey. Community surveys offer an important tool in the resource managers’ toolbox to understand social perceptions of water and provide valuable insights that may assist in improving its governance.

Studies on the Nature and Chemistry of Sediments and Water of Periyar and Chalakudy Rivers, Kerala, India

The present study is an attempt to address issues related to sediment properties like texture, mineralogy and geochemistry as well as water quality of two important rivers of central Kerala-the Periyar and the Chalakudy rivers. The main objectives of the study are to investigate the textural and mineralogical characteristics as well as transportation and depositional mechanisms of the sediments of Periyar and Chalakudy rivers, to find out the geochemical variability of organic carbon, phosphorus and certain major (Na,K,Ca and Mg) and minor/trace(Mn,Pb,Ni,Cr, and Zn) elements in the bulk sediments and mud fraction of these rivers, to evaluate the status of heavy metal pollution registered in the sediments of these rivers, to assess the physico-chemical characteristics and water quality of Periyar and Chalakudy rivers and to estimate the dissolved nutrient flux through the Periyar and Chalakudy rivers into the receiving coastal waters. The granulometric characteristics as well as statistical parameters of the sediments of Periyar and Chalakudy rivers depend on the flow pattern controlled by the gradient of the terrain. Compared to Periyar, fluctuations in the dispersal of particles are more in Chalakudy river. In Periyar river, the P and Fe in bulk sediments show a positive correlation with C-org, while in Chalakudy river, both the elements are related to THM concentration. In general, C-org, Fe and P Shows an increasing trend downstream. In Periyar river, the P and Fe in bulk sediments show a positive correlation with C-org, while in Chalakudy river, both the elements are related to THM concentration. Among these two rivers, the pollution of water is several fold higher in Periyar river due to influx due to influx of considerable quantity of liquid and solid wastes of industrial/domestic/urban origin. Nutrient analysis reveals 2-3 times increase in N and P during monsoon season whereas SiO2-Si shows a decreasing trend.

Effect of some toxic metals on selected phytoplankton of Kerala water

The extraction and use of metals has been the mainstay for the sustained development and progress of a nation. Metals, though fairly stable in the natural environment are found in trace quantities in water bodies. Attention has therefore been focused to identify the metals that impair the water quality. In the last few decades the concern about the fate of these metals in the aquatic system has been gaining momentum, particularly in the industrial belts. The disasters caused by metal poisoning in recent times have prompted an indepth study of the interaction of metals with aquatic biota. Kerala, basically an agriculture oriented state has witnessed the upsurgence of various industries as a part of the nationwide economic development programme. Cochin has been identified as the industrial capital of the state.The present study is an attempt towards a better understanding of the metal-phytoplankton interactions with special reference to the physiological changes in the species. various parameters such as temperature, salinity, pH, nutrients, number of cells, photosynthetic pigments, carbohydrates, protein and lipid are studied to highlight the complexity of metal..phytoplankton interaction

Studies on coagulase-positive staphylococci and Vibrio parahaemollticus in selected items of fish, crustaceans and fishery products

In India much work has been done on different aspects of quality of processed fish and fishery products (Pillai et al., 1965; Iyer and Chaudhuri, 1966; Iyer et al., 1966; Sreenivasan and Joseph, 1966; Pillai and Rao, 1969; Mathen et al., 1975; Valsan et al., 1985) and standards have been formulated for almost all the fishery products. Quality standards for fresh fish cover only a few fish species available in the markets. For the formulation and recommendation of quality standards for fish and fishery products for domestic trade detailed background informations are necessary. Khot et al., (1982), Valsan et al. J (1985) and Iyer et al. (1986) have reported on the bacterial flora of sea foods at retail level in Bombay. Cochin is a major fish landing centre of the south west coast of India, and an average of 25,000. tonnes of fish/shell fish are landed annually at this harbour which is about 10 percent of the total catch of fish in Kerala (Lakshmanan -et -al., 1984). All the varieties of marine, brackish water and fresh water fishes are available in Cochln throughout the year for catering to Its cosmopolitan. population and informations regarding their bacteriological quality are scanty. Hence the present study was undertaken to investigate the bacteriological quality of fish and fishery products available in the markets and cold storages situated in and around Cochin meant for internal consumption.