Childhood adversities as risk factors for onset and persistence of suicidal behaviour

Background Suicide is a leading cause of death worldwide, but the precise effect of childhood adversities as risk factors for the onset and persistence of suicidal behaviour (suicide ideation, plans and attempts) are not well understood. Aims To examine the associations between childhood adversities as risk factors for the onset and persistence of suicidal behaviour across 21 countries worldwide. Method Respondents from nationally representative samples (n = 55 299) were interviewed regarding childhood adversities that occurred before the age of 18 years and lifetime suicidal behaviour. Results Childhood adversities were associated with an increased risk of suicide attempt and ideation in both bivariate and multivariate models (odds ratio range 1.2-5.7). The risk increased with the number of adversities experienced, but at a decreasing rate. Sexual and physical abuse were consistently the strongest risk factors for both the onset and persistence of suicidal behaviour, especially during adolescence. Associations remained similar after additional adjustment for respondents` lifetime mental disorder status. Conclusions Childhood adversities (especially intrusive or aggressive adversities) are powerful predictors of the onset and persistence of suicidal behaviours.

AGE DIFFERENCES IN THE PREVALENCE AND CO-MORBIDITY OF DSM-IV MAJOR DEPRESSIVE EPISODES: RESULTS FROM THE WHO WORLD MENTAL HEALTH SURVEY INITIATIVE

Background: Although depression appears to decrease in late life, this could be due to misattribution of depressive symptoms to physical disorders that increase in late we. Methods: We investigated this issue by studying age differences in co-morbidity of DSM-IV major depressive episodes (MDE) with chronic physical conditions in the WHO World Mental Health (WMH) surveys, a series of community epidemiological surveys of respondents in 10 developed countries (n = 52,485) and 8 developing countries (n = 37,265). MDE and other mental disorders were assessed with the Composite International Diagnostic Interview (CIDI). Organic exclusion rules were not used to avoid inappropriate exclusion of cases with physical co-morbidity. Physical conditions were assessed with a standard chronic conditions checklist. Results: Twelve-month DSM-IV/CIDI MDE was significantly less prevalent among respondents ages 65+ than younger respondents in developed but not developing countries. Prevalence of co-morbid mental disorders generally either decreased or remained stable with age, while co-morbidity of MDE with mental disorders generally increased with age. Prevalence of physical conditions, in comparison, generally increased with age, while co-morbidity of MDE with physical conditions generally decreased with age. Depression treatment was lowest among the elderly in developed and developing countries. Conclusions: The weakening associations between MDE and physical conditions with increasing age argue against the suggestion that the low estimated prevalence of MDE among the elderly is due to increased confounding with physical disorders. Future study is needed to investigate processes that might lead to a decreasing impact of physical illness on depression among the elderly. Depression and Anxiety 27:351-364, 2010. (C) 2009 Wiley-Liss, Inc.

Developments in the understanding of South African style SAG mills

The South African style SAG (RoM) mills operate in a window that is almost exclusive from the operation of the Australian and North American mills that have been used for the development of SAG mill models. Combining good quality, test data from the RoM mills is extending and improving these models, and assisting in a practical manner in improving our understanding of SAG/AG milling. Data from high mill loads, both in absolute filling and ball loading, have been used to extend and improve the JK SAG mill model. This improved understanding has been successfully applied to increasing the throughput of a mill by 8%. Data is presented on relationships between power and load for high mill loading. Slurry pooling is common in closed-circuit RoM mills, and the detrimental effect of this has been dramatically demonstrated at ALCOA with a mill throughput increase of over 20%. Techniques for calculating the effects of slurry pooling have been developed and a new pulp lifter system designed to give optimal slurry discharge. The influence of mill speed in shifting the product size distribution has also been measured. (C) 2001 Elsevier Science Ltd. All rights reserved.

Complete genomic sequence of the Australian south-west genotype of Sindbis virus: Comparisons with other Sindbis strains and identification of a unique deletion in the 3 '-untranslated region

Our previous studies have shown that two distinct genotypes of Sindbis (SIN) virus occur in Australia. One of these, the Oriental/Australian type, circulates throughout most of the Australian continent, whereas the recently identified south-west (SW) genetic type appears to be restricted to a distinct geographic region located in the temperate south-west of Australia. We have now determined the complete nucleotide and translated amino acid sequences of a SW isolate of SIN virus (SW6562) and performed comparative analyses with other SIN viruses at the genomic level. The genome of SW6562 is 11,569 nucleotides in length, excluding the cap nucleotide and poly (A) tail. Overall this virus differs from the prototype SIN virus (strain AR339) by 23% in nucleotide sequence and 12.5% in amino acid sequence. Partial sequences of four regions of the genome of four SW isolates were determined and compared with the corresponding sequences from a number of SIN isolates from different regions of the World. These regions are the non-structural protein (nsP3), the E2 gene, the capsid gene, and the repeated sequence elements (RSE) of the 3'UTR. These comparisons revealed that the SW SIN viruses were more closely related to South African and European strains than to other Australian isolates of SIN virus. Thus the SW genotype of SIN virus may have been introduced into this region of Australia by viremic humans or migratory birds and subsequently evolved independently in the region. The sequence data also revealed that the SW genotype contains a unique deletion in the RSE of the 3'UTR region of the genome. Previous studies have shown that deletions in this region of the SIN genome can have significant effects on virus replication in mosquito and avian cells, which may explain the restricted distribution of this genotype of SIN virus.

Ecological footprint as an indicator of sustainability at Lisbon School of Health Technology, Portugal

Higher education institutions, has an active role in the development of a sustainable future and for this reason, it is essential that they became environmentally sustainable institutions, applying methods such as the Ecological Footprint analysis. This study intent is to strengthen the potential of the ecological footprint as an indicator of the sustainability of students of Lisbon School of Health Technology, and identify the relationship between the ecological footprint and the different socio-demographic variables.

Carbon footprint of the academic community of Lisbon School of Health Technology, Portugal

According to the Intergovernmental Panel on Climate Change, the average temperature of the Earth's surface has risen about 1º C in the last 100 years and will increase, depending on the scenario emissions of Greenhouse Gases. The rising temperatures could trigger environmental effects like rising sea levels, floods, droughts, heat waves, hurricanes. With growing concerns about different environmental issues and the need to address climate change, institutions of higher education should create knowledge and integrate sustainability into teaching programs and research programs, as well as promoting environmental issues for society. The aim of this study is to determine the carbon footprint of the academic community of Lisbon School of Health Technology (ESTeSL) in 2013, identifying possible links between the Carbon Footprint and the different socio-demographic variables.

Logoplaste: Internationalization to South Africa through flexible packaging

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Impact of Federal Library Services and Technology Act Funds in Iowa, May 2007.

A report that Mary Wegner gave Iowa's congressmen and senators during this year's ALA Legislative Day in Washington, DC. The report reflects the important ways the State Library uses LSTA funds to help Iowa libraries provide the best service possible to their customers. LSTA funds also pay the salaries of Library Development staff.

Domicola lithodesi n.gen n.sp. (Amphipoda: Calliopiidae), inhabitant of thepleonal cavity of a South African lithodid crab

Domicola lithodesi, a new genus and species of gammaridean amphipod is described. It is placed in the family Calliopiidae. Two specimens, a male and a preparatory female, were collected in August 1990 from the pleonal cavity of the lithodid crab Lithodes ferox (Filhol, 1885), an anomuran crab caught at 300 m depth from off Namibia. The more relevant characters are: anophtalmous; body smooth, gammarid-like, male smaller than female, urosomite 1 with a prepeduncular spine; telson broad, entire, unlobed and unarmed; short rostrum; accessory flagellum scale-like, calceoli absent; lower lip without inner lobes; coxa 4 posteriorly excavated; gnathopods basic, subequal, with numerous palmar spines; dactyls on P3-7 with specialized adhesive organs; coxal gill 7 present; uropods eusirid type.

Phenols, flavonoids and antioxidant activity of aqueous and methanolic extracts of propolis (Apis mellifera L.) from Algarve, South Portugal

Propolis is a resinous substance collected by honeybees to seal honeycomb, which has been used in folk medicine due to its antimicrobial and antioxidant properties. In the present study, water and methanol were used to extract phenols and flavonoids from propolis collected in thirteen different areas in the Algarve region during the winter and spring. The ABTS•+, DPPH•, and O2•- scavenging capacity, and metal chelating activity were also evaluated in the propolis samples. Methanol was more effective than water in extracting total phenols (2.93-8.76 mg/mL) (0.93-2.81 mg/mL). Flavones and flavonols were also better extracted with methanol (1.28-2.76 mg/mL) than with water (0.031-0.019 mg/mL). The free radical scavenging activity, ABTS (IC50=0.006-0.036 mg/mL), DPPH (IC50=0.007-0.069 mg/mL) and superoxide (IC50=0.001-0.053 mg/mL), of the samples was also higher in methanolic extracts. The capacity for chelating metal ions was higher in aqueous extracts (41.11-82.35%) than in the methanolic ones (4.33-29.68%). Propolis from three locations of Algarve region were richer in phenols and had better capacity for scavenging free ABTS and DPPH radicals than the remaining samples. These places are part of a specific zone of Algarve known as Barrocal.

Introduction to engineering : a case study of an interdisciplinary course in Mathematics, Science and Technology

This thesis research was a qualitative case study of a single class of Interdisciplinary Studies: Introduction to Engineering taught in a secondary school. The study endeavoured to explore students' experiences in and perceptions of the course, and to investigate the viability of engineering as an interdisciplinary theme at the secondary school level. Data were collected in the form of student questionnaires, the researcher's observations and reflections, and artefacts representative of students' work. Data analysis was performed by coding textual data and classifying text segments into common themes. The themes that emerged from the data were aligned with facets of interdisciplinary study, including making connections, project-based learning, and student engagement and affective outcomes. The findings of the study showed that students were positive about their experiences in the course, and enjoyed its project-driven nature. Content from mathematics, physics, and technological design was easily integrated under the umbrella of engineering. Students felt that the opportunity to develop problem solving and teamwork skills were two of the most important aspects of the course and could be relevant not only for engineering, but for other disciplines or their day-to-day lives after secondary school. The study concluded that engineering education in secondary school can be a worthwhile experience for a variety of students and not just those intending postsecondary study in engineering. This has implications for the inclusion of engineering in the secondary school curriculum and can inform the practice of curriculum planners at the school, school board, and provincial levels. Suggested directions for further research include classroom-based action research in the areas of technological education, engineering education in secondary school, and interdisciplinary education.

Geochemical, Sedimentological And Remote Sensing Studies Of Kayamkulam Estuary, South West Coast Of India- A Gis Approach

In this study, an attempt has been made to find the textural, geochemical, sedimentological characteristics of sediments and water phases of the kayamkulam estuary located in the Southwest coast of Kerala, besides the impact of gas based thermal power plant located at the northern part of the estuary. Estuaries are an important stage in the transport of the solid weathering product of the earth’s crust. These weathered products or sediments are complex mixtures of a number of solid phases that may include clays, silica, organic matter, metal oxides, carbonates, sulfides and a number of minerals. Studies on the aquatic systems revealed the fact that it posses severe ecological impairments due to heavy discharge of sediments from 44 rivers, the continued disposal of pollutants rich materials from industries, sewage channels, agricultural areas and retting yards