Arnt van Tricht : Werkkatalog eines Bildhauers am Niederrhein im 16. Jahrhundert

Arnt van Tricht, gest. 1570, unterhielt bis in die späten 50er Jahre des 16. Jahrhunderts, wahrschein-lich aus Antwerpen kommend, in Kalkar am Niederrhein eine sehr erfolgreiche Werkstatt. Die bis dahin vorherrschende spätgotische Formensprache der langjährig ansässigen Bildhauer löste er durch die der Renaissance ab, führte jedoch deren Arbeitsfelder und Materialwahl weiter. Arnt van Tricht schuf Arbeiten sowohl religiöser als auch profaner Natur innerhalb des Gebiets der damals sehr bedeutenden Vereinigten Herzogtümer Kleve-Mark-Jülich-Berg und Geldern. Seine wohlhabenden Auftraggeber entstammten dem Klerus, der Bürgerschaft und dem Adel.rnIm Rahmen der Arbeit zeigte sich, dass sich für den Künstler die Verlegung der herzoglichen Residenz nach Düsseldorf und der wirtschaftliche Niedergang der Region letztlich stärker auswirkte als die religiösen Veränderungen durch die Reformation.rnArnt van Tricht schuf die meisten seiner religiösen Bildwerke für die Stiftskirche St. Viktor in Xanten, die durch die Bürgerschaft ausgestattete Pfarrkirche von St. Nicolai in Kalkar und umliegende Gemeinden. Einzelne Stücke sind, wohl über familiäre Verflechtungen vermittelt, in einem weiteren Radius zu finden. Van Tricht arbeitete Schnitzretabel mitsamt ihrer ornamentalen und figuralen Aus-stattung sowie Skulpturen(-gruppen) in Eichenholz. Daneben finden sich im Werk zahlreiche in Sandstein gearbeitete Skulpturen, die teilweise an Pfeilern und Portalen der Kirchen architektur-gebunden sind. Neben diesen rundplastischen Werken schuf Arnt van Tricht eine große Anzahl an steinernen Reliefarbeiten. Hierbei nehmen die überwiegend für die lokalen Kanoniker gearbeiteten Epitaphien mit biblischem Reliefbild in Ornamentrahmen den größten Teil ein.rnEin zweiter, gleichwertiger Werkkomplex, überwiegend in Sandstein gearbeitet, ist profaner Natur und fällt durch die Größe der Aufträge ins Gewicht. Arnt van Tricht war an einigen groß angelegten Modernisierungsprojekten an Stadthäusern und Kastellen des lokalen Adels beschäftigt. Für mehrere aufwendig gestaltete Fassadendekorationen arbeitete er Architekturglieder mit figürlicher Darstellung oder Ornament, Büsten und freiplastische Skulpturen. Arnt van Tricht war aber auch an der Aus-gestaltung der Innenräume beteiligt. Aufwendig skulptierte und reliefverzierte Kaminverkleidungen stehen dabei neben reduzierteren Arbeiten für offensichtlich weniger repräsentative Räume. Neben in Eichenholz gearbeiteter Vertäfelung schuf Arnt van Tricht hölzerne figurale Handtuchhalter. Diese zeigen, wie auch die Reliefbilder der Kamine, die darüber hinaus Wappen und Porträts der Bauherren aufnehmen, eine religiöse oder profane, auch antikisierende Thematik, bei der ein moralisierender Unterton mitschwingt.rnIn dieser Arbeit werden erstmals alle Werkstücke des Künstlers zusammengeführt dargestellt, so dass ein Werkkatalog mit einem Überblick über das sehr breit gefächerte Spektrum des Opus Arnt van Trichts vorliegt. Häufig durch bloße Nennung mit Arnt van Tricht in Verbindung gebrachte Arbeiten werden bewertet und die Zu- oder Abschreibung begründet. Auch können einige Stücke neu zugeschrieben werden.

Metallic copper as an antimicrobial surface

Bacteria, yeasts, and viruses are rapidly killed on metallic copper surfaces, and the term "contact killing" has been coined for this process. While the phenomenon was already known in ancient times, it is currently receiving renewed attention. This is due to the potential use of copper as an antibacterial material in health care settings. Contact killing was observed to take place at a rate of at least 7 to 8 logs per hour, and no live microorganisms were generally recovered from copper surfaces after prolonged incubation. The antimicrobial activity of copper and copper alloys is now well established, and copper has recently been registered at the U.S. Environmental Protection Agency as the first solid antimicrobial material. In several clinical studies, copper has been evaluated for use on touch surfaces, such as door handles, bathroom fixtures, or bed rails, in attempts to curb nosocomial infections. In connection to these new applications of copper, it is important to understand the mechanism of contact killing since it may bear on central issues, such as the possibility of the emergence and spread of resistant organisms, cleaning procedures, and questions of material and object engineering. Recent work has shed light on mechanistic aspects of contact killing. These findings will be reviewed here and juxtaposed with the toxicity mechanisms of ionic copper. The merit of copper as a hygienic material in hospitals and related settings will also be discussed.

Strategies of Representation, Relationship, and Resistance: British Women Travelers and Mormon Plural Wives, c. 1870-1890

During the 1870s and 1880s, several British women writers traveled by transcontinental railroad across the American West via Salt Lake City, Utah, the capital of the Church of Jesus Christ of Latter-day Saints, or Mormons. These women subsequently wrote books about their travels for a home audience with a taste for adventures in the American West, and particularly for accounts of Mormon plural marriage, which was sanctioned by the Church before 1890. "The plight of the Mormon woman," a prominent social reform and literary theme of the period, situated Mormon women at the center of popular representations of Utah during the second half of the nineteenth century. "The Mormon question" thus lends itself to an analysis of how a stereotyped subaltern group was represented by elite British travelers. These residents of western American territories, however, differed in important respects from the typical subaltern subjects discussed by Victorian travelers. These white, upwardly mobile, and articulate Mormon plural wives attempted to influence observers' representations of them through a variety of narrative strategies. Both British women travel writers and Mormon women wrote from the margins of power and credibility, and as interpreters of the Mormon scene were concerned to established their representational authority.

DEVELOPMENT OF AN OPTIMIZATION MODEL FOR BIOFUEL FACILITY SIZE AND LOCATION AND A SIMULATION MODEL FOR DESIGN OF A BIOFUEL SUPPLY CHAIN

A range of societal issues have been caused by fossil fuel consumption in the transportation sector in the United States (U.S.), including health related air pollution, climate change, the dependence on imported oil, and other oil related national security concerns. Biofuels production from various lignocellulosic biomass types such as wood, forest residues, and agriculture residues have the potential to replace a substantial portion of the total fossil fuel consumption. This research focuses on locating biofuel facilities and designing the biofuel supply chain to minimize the overall cost. For this purpose an integrated methodology was proposed by combining the GIS technology with simulation and optimization modeling methods. The GIS based methodology was used as a precursor for selecting biofuel facility locations by employing a series of decision factors. The resulted candidate sites for biofuel production served as inputs for simulation and optimization modeling. As a precursor to simulation or optimization modeling, the GIS-based methodology was used to preselect potential biofuel facility locations for biofuel production from forest biomass. Candidate locations were selected based on a set of evaluation criteria, including: county boundaries, a railroad transportation network, a state/federal road transportation network, water body (rivers, lakes, etc.) dispersion, city and village dispersion, a population census, biomass production, and no co-location with co-fired power plants. The simulation and optimization models were built around key supply activities including biomass harvesting/forwarding, transportation and storage. The built onsite storage served for spring breakup period where road restrictions were in place and truck transportation on certain roads was limited. Both models were evaluated using multiple performance indicators, including cost (consisting of the delivered feedstock cost, and inventory holding cost), energy consumption, and GHG emissions. The impact of energy consumption and GHG emissions were expressed in monetary terms to keep consistent with cost. Compared with the optimization model, the simulation model represents a more dynamic look at a 20-year operation by considering the impacts associated with building inventory at the biorefinery to address the limited availability of biomass feedstock during the spring breakup period. The number of trucks required per day was estimated and the inventory level all year around was tracked. Through the exchange of information across different procedures (harvesting, transportation, and biomass feedstock processing procedures), a smooth flow of biomass from harvesting areas to a biofuel facility was implemented. The optimization model was developed to address issues related to locating multiple biofuel facilities simultaneously. The size of the potential biofuel facility is set up with an upper bound of 50 MGY and a lower bound of 30 MGY. The optimization model is a static, Mathematical Programming Language (MPL)-based application which allows for sensitivity analysis by changing inputs to evaluate different scenarios. It was found that annual biofuel demand and biomass availability impacts the optimal results of biofuel facility locations and sizes.

Study and Correlation of Belt and Cambrian Arkoses near Limespur, Montana

In the vicinity of Limespur, Montana, a siding along the Northern Pacific Railroad near Whitehall, Montana, occurs a characteristic type of arkose where­ in many small red mineral grains are distributed throughout the rock mass. It is in this respect that this arkose differs from other arkoses in the surrounding region.

The Geology and Ore Deposits of Jardine, Montana

The subject to be covered by this paper is based upon field study made during a six week stay at Jardine. The work began on June 19, 1937 and ended on July 31 of the same year.

Geology and Ore Deposits of the Clinton Mining District

This report includes the results of geological investigation of the Clinton Mining District and the Hidden Treasure Mine.The Clinton Mining District is an unorganized mining dis­trict situated in the Garnet Range two and one-half miles northeast of the town of Clinton, Montana, which is on the Northern Pacific Railway and the Chicago, Milwaukee, St. Paul, and Pacific Railroad seventeen miles east of the city of Missoula. The district is in the same range of mountains as the Gar­net Mining District and the drainage from the district covered is to the south into the Hell Gate or Clarks Fork of the Colum­bia River. The main stream is known as Trail creek, which runs in a southerly direction from the area studied.

Chromite Deposits Near Red Lodge and Silver Star, Montana

The Red Lodge and Silver Star chromite deposits of Montana have stimulated much interest during periods of war. The Red Lodge deposit is 25 miles southwest of Red Lodge which is also the nearest railroad point. Several workings are scattered throughout the area, exposing lense-like ore bodies averaging 33% chrome oxide. Silver Star is a much smaller deposit 5 miles west of Silver Star, Montana, which is its nearest rail­road point. Lenses of chromite are exposed by pits and trench­es, which average approximately 36% chromic oxide.

A Geological Report on South Boulder Canyon and The Mayflower Mine-Renova Areas

The purpose of this report is to serve as a written explanation of the accompanying geologic maps and columnar sec­tion. Each year the senior students in mining and geological engineering at the Montana School of Mines spend two weeks in the field where they learn the fundamentals of geologic mapping and related field studies. An additional week is spent at the school where maps are assembled, prints made, end other work is done in preparation for the writing of the report.

Manganese Oxide Deposits Near Butte and Development Since 1942

The manganese minerals occur in the peripheral zone of the Butte district with quartz in veins, which at depth contain galena and sphalerite closely associated with silver-bearing minerals. The manganese oxides are all oxidation products formed by weathering of primary rhodochrosite or rhodonite.

The Amplifier - v. 7, no. 3

In this issue...Nuclear Reactor Testing Station, Arco, Idaho, Wesley club, Northern Pacific Railroad, Newman Club, geology, Russell Barthell, Main Hall, Thanksgiving, Montana Power

A Mineral Dressing and Economic Study of a Complex Arsenical Ore

The factors that influence the choice of a method for treat­ment of an ore comprise the technical and economic limitations and advantages, derived in detail and balanced according to the exigencies of the particular situation.

The Amplifier- v. 8, no. 4

In this issue...Anaconda Railroad, Professor Stout, International Club, Hord's Jewelry, KXLF Television station, Coed Club, cyclone fence, Ray Kotow

The Amplifier - v. 8,(a-4) no. 4

In this issue...Berkeley Pit, Cal Strobel, Y.M.C.A., Butte Hill, copper Lounge, Christmas Formal, Intramurals, Knievel Imports, Ski Club, Southern Pacific Railroad

The effect of shoulder variation on IMRT and SmartArc for Head and Neck Cancer

Purpose: First, to determine an average and maximum displacement of the shoulder relative to isocenter over the course of treatment. Second, to establish the dosimetric effect of shoulder displacements relative to correct isocenter alignment on the dose delivered to the target and the surrounding structures for head and neck cancer patients. Method and Materials: The frequency of shoulder shifts of various magnitudes relative to isocenter was assessed for 4 patients using image registration software. The location of the center of the right and left humeral head relative to isocenter (usually C2) was found daily from CT on rails scans, and was compared to the location of the humeral heads relative to isocenter on the initial simulation CT. Three Baseline head and neck IMRT and SmartArc plans were generated in Pinnacle based on simulation CTs. The CT datasets (external contour and boney structures) were then modified to represent shifts of the shoulder (relative to isocenter) between 3 mm and 15 mm in the SI, AP, and LR directions. The initial plans were recalculated on the image sets with shifted shoulders. Results: On average, shoulder variation was 2-5 mm in each direction, although displacements of over 1 cm in the inferior and posterior directions occurred. Shoulder shifts induced perturbations in the dose distribution, although generally only for large shifts. Most substantially, large, superior shifts resulted in coverage loss by the 95% isodose line for targets in the lower neck. Inferior shifts elevated the dose to the brachial plexus by 0.6-4.1 Gy. SmartArc plans showed similar loss of target coverage as IMRT plans. Conclusions: The position of the shoulder can have an impact on target coverage and critical structure dose. Shoulder position may need to be considered for setup of head and neck patients depending on target location.