Effect of thermal and mechanical cycles on the hardness and roughness of artificial teeth

In this study the effects of thermal and mechanical cycles on the hardness and roughness of artificial teeth were evaluated. Materials and Methods:Specimens were prepared and stored in distilled water at 37ºC for 48 hours (n=10).The hardness and roughness readings were made in the following time intervals, according to each group:G1: after specimen storage in distilled water at 37°C for 48 hours; G2: after 600.000 constant mechanical cycles; G3: after 1.200.000 constant mechanical cycles; G4: after 2.500 thermalcycling baths, alternated between hot water (55°C) and cold water (5°C) and G5: after 5.000 thermalcycling baths, alternated between hot water (55°C) and cold water (5°C). After cycling and storage procedures, the specimens of each group were submittedto surface roughness and hardness readouts. Statistical evaluation was performed by three-way analysis of variance, complemented by the Tukey multiple comparisons of means test. The level of significance adopted was 5%. There was no significant difference between G1, G4 and G5 as regards mean roughness of different brands of artificial teeth. Groups G2 and G3 showed higher mean roughness values, and generally equivalent values in all time intervals, except for Trilux (G3> G2). Significant differences in hardness values were observed in different brands of artificial teeth, and differences in values after thermal and mechanical cycling. In conclusion, our findings suggest that thermal cyclingdid not change the roughness of the artificial teeth tested, but after the mechanical cycling the roughness values increased. Thermal and mechanical cycling influenced the hardness of the artificial teeth tested.

Fracture resistance of endodontically-treated teeth submitted to bleaching treatment with hydrogen peroxide and titanium dioxide nanoparticles photoactivated by LED-laser

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Epitheliotropic cutaneous T-cell lymphoma associated with melanoma in a dog: case report

Several types of tumors affect dogs' skin. Simultaneously occurring neoplasms with different histological patterns might be rarely present in the same animal. This paper describes the occurrence of epitheliotropic cutaneous T-cell lymphoma and melanoma in a dog. The animal had nodular lesions in the abdominal region and serpiginous plaques on the dorsal region of the trunk. Cytology evidenced malignant fusiform cells from the abdominal lesions as well as few round cells from the dorsal. The histopathological examination of the abdominal lesions showed dermis with polygonal to spindle-shaped neoplastic cells. The lesion of the dorsal region evidenced neoplastic round cells with generally distinct cell borders and a moderate amount of eosinophilic cytoplasm. Abdominal lesions were positive for Melan A. Dorsal and forelimb lesions were positive for CD3. This study reports the occurrence of epitheliotropic cutaneous T-cell lymphoma and malignant melanoma in a crossbred Boxer dog and discusses the importance of performing immunohistochemical profile to confirm the phenotype of the tumor.

Molar incisor hypomineralization (MIH): conservative treatment management to restore affected teeth

The purpose of this study was to evaluate the 12-month clinical performance of glass ionomer restorations in teeth with MIH. First permanent molars affected by MIH (48) were restored with glass ionomer cement (GIC) and evaluated at baseline, at 6 and at 12 months, by assessing tooth enamel breakdown, GIC breakdown and caries lesion associations. The data were analyzed using the chi-square test and actuarial survival analysis. The likelihood of a restored tooth remaining unchanged at the end of 12 months was 78%. No statistically significant difference was observed in the association between increased MIH severity and caries at baseline (p > 0.05) for a 6-month period, or between increased MIH severity and previous unsatisfactory treatment at baseline (p > 0.05) for both a 6- and 12-month period. A statistically significant difference was observed in the association between increased MIH severity and extension of the restoration, involving 2 or more surfaces (p < 0.05) at both periods, and between increased MIH severity and caries at baseline (p < 0.05) at a 12-month period. Because the likelihood of maintaining the tooth structures with GIC restorations is high, invasive treatment should be postponed until the child is sufficiently mature to cooperate with the treatment, mainly of teeth affected on just one face.

Fracture resistance of simulated immature teeth after different intra-radicular treatments

The aim of this study was to evaluate the fracture resistance of simulated immature teeth after different intra-radicular treatments. Crowns and roots of bovine incisors were cut transversally and removed to simulate immature teeth. Root canal preparation and flaring were performed using a bur in crown-apex and apex-crown direction. The samples were distributed into 5 groups (n=10): Positive control (PoC) - no root canal flaring or filling; Negative control (NeC) - teeth were sectioned and their root canals were flared; Direct anatomical glass fiber post (RaP) - #2 Reforpost main glass fiber post relined with composite resin; Double tapered conical glass fiber posts (ExP) - #3 Exacto glass fiber post; and #2 Reforpost main glass fiber + Reforpin accessory glass fiber posts (RrP). In RaP, ExP and RrP, 4.0-mm apical plugs were done with MTA Angelus. The specimens were embedded in polystyrene resin inside cylinders and the periodontal ligament was simulated with a polyether-based impression material. The specimens were submitted to compressive fracture strength test (0.5 mm/min at 135° relative to the long axis of the tooth) in a servo-hydraulic mechanical testing machine MTS 810. Data were subjected to one-way ANOVA and Dunnett's C or Tukey's tests (α=0.05). The control groups (PoC and NeC) showed lower fracture strength than the experimental groups. NeC presented the lowest resistance and ExP presented the highest resistance among the experimental groups. The flaring procedures produced a detrimental effect on the fracture resistance of the bovine teeth. Glass fiber intra-radicular posts increased significantly the fracture resistance of simulated immature teeth.

Taste alteration, mouth dryness and teeth staining as side effects of medications taken by elderly

Elderly patients generally use several types of medication, some of which may cause oral side effects. Aim: To investigate the oral side effects caused by medication in an elderly sample. Methods: Three hundred patients were interviewed about their use of medication and were divided in two groups: institutionalized (n=150) and community-dwelling (n=150) elderly. Results: The most used drugs were antihypertensives (53%) for community-dwelling elders and antiulceratives (76%) for the institutionalized ones. The more prevalent side effects were taste alterations that occurred in 19%, dry mouth in 17% and teeth staining in 2%. Conclusions: A high prevalence of oral side effects from medications used by the elderly was found in this study. The health professionals should be aware of the possible side effects caused by prescribed medications.

Clinicopathological and immunohistochemical evaluation of oesophageal leiomyosarcoma in a dog

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cutaneous abscess caused by Corynebacterium lactis in a companion dog

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

An atypical Toxoplasma gondii genotype in a rural Brazilian dog co-infected with Leishmania (Viannia) braziliensis

Toxoplasmosis and leishmaniasis are two worldwide zoonoses caused by the protozoan parasites Toxoplasma gondii and Leishmania spp., respectively. This report describes the clinical and laboratorial findings of a co-infection with both parasites in a 4-year-old female dog suspected of ehrlichiosis that presented anemia, thrombocytopenia, hypoalbuminemia, hyperglobulinemia, tachyzoite-like structures to the lung imprints, and polymerase chain reaction (PCR) results positive for T. gondii (kidney, lung, and liver) and Leishmania spp. Co-infection with Toxoplasma gondii and Leishmania braziliensis was confirmed by sequencing; restriction fragment length polymorphism-polymerase chain reaction (RFLP-PCR) confirmed an atypical T. gondii genotype circulating in dogs that has been reported to cause human congenital toxoplasmosis.

Long-term clinical evaluation of the color stability and stainability of acrylic resin denture teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of method of caries induction on aged resin-dentin bond of primary teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Responses of Dental Pulp Cells to a Less Invasive Bleaching Technique Applied to Adhesively Restored Teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of copper vapor laser irradiation (λ = 510.6 nm) on the enamel and dentine of human teeth: An ultra-structural morphologic study

Objective: A morphological and ultra-structural study of copper vapor laser (λ = 510.6 nm) effects on enamel and dentine was performed to show the effects of this radiation. Methods: A total of 15 human molars were cut in half; 15 pieces were separated for irradiation on enamel and 15 for dentine. These two groups were further divided into five experimental groups, including a control group, comprised of three half-sections each, irradiated by a CVL laser with a power of 7 W, a repetition rate of 15,000 pulses/sec and exposed at 500, 600, and 800 msec and 1 sec irradiation times with a 5-sec interval between irradiations. Results: In an ultra-structural SEM exam, we observed that on the enamel surfaces irradiated for 1 sec there was morphological alteration that consisted of catering, flaking, and melting on the surfaces. There was no alteration for the other exposure times. On the dentine teeth irradiated for 1 sec, we observed an evident ultra-structural alteration of melted tissue and loss of morphological characteristics. In the dentine group irradiated by 800 msec, we observed ablation and a partial loss of morphological characteristics. In the dentine groups irradiated by 500 and 600 msec, no alteration was observed. Conclusions: The results showed that irradiation with CVL promoted morphologic changes in the enamel as well as in the dentine and demonstrated a need for future studies in order to establish a safe protocol for further use in the odontological practice.

Effect of polymerization methods and thermal cycling on color stability of acrylic resin denture teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)