A segurança dos consumidores

The present report, about consumer’s safety, shows the development of the knowledge on this particular subject and the actions carried out by entities that fight for the protection of consumer’s rights. The internship was based on the knowledge acquirement on the theoretical and practical aspects of the fight lead by the Direção Geral do Consumidor, together with other entities, towards the elimination or solely the reduction of risks caused by some products and services made available for the consumers or put on the market. During the internship, I counted with the support of my supervisor in the DGC, Dr. Ana Catarina Fonseca and, for the writing of the report, I had the help of my thesis advisor, Dr. Jorge Morais Carvalho, whenever I needed constructive criticism. My participation on the creation of the informative brochures about consumer’s safety, and the study of the legislation used by the DGC on the daily work, enabled me, effectively, to consolidate my guiding principles as a future professional on the matters of the creation of entities, private and public, which aim to ensure the protection of consumers’s rights, informing them of the possible risks or solving the already existing problems, removing dangerous products and services from the market.The report clarifies the action of the DGC on the protection of consumer’s safety, and enables some knowledge on the relations between the entities that work for the protection of the consumers and the market operators and on their work on identifying dangerous products and warning the consumers about it. The final part of this report contains information that allows us to form an idea of the importance that consumer safety has had in Cape Verde, compared with the laws of Portugal on the matter.

Produção de resíduos hospitalares na prestação de cuidados domiciliários

RESUMO - Os resíduos hospitalares (RH) perigosos — Grupos III e IV — produzidos na prestação de cuidados domiciliários (CD), dada a sua composição, infecciosidade, toxicidade, mobilidade e persistência, constituem um perigo relevante. A exposição a estes resíduos traduz-se num risco importante para os profissionais de saúde, doentes e seus familiares. Dado que em muitas situações estes resíduos ficam no domicílio dos doentes, sendo posteriormente depositados nos contentores camarários, o risco é alargado ao público em geral, aos catadores e aos profissionais de recolha de resíduos sólidos urbanos dos municípios. Através de um estudo observacional, transversal, com componente analítica, da produção de RH pretende-se determinar e caracterizar os quantitativos dos Grupos III e IV produzidos na prestação de CD em 2003 no concelho da Amadora, identificando também o seu destino final. Utiliza- se uma amostra aleatória do universo de doentes submetidos a tratamento domiciliário em 2003 e efectua-se a análise da associação estatística das variáveis peso do Grupo III e peso do Grupo IV com as variáveis relativas às características do doente (sexo, idade e doença), do tratamento (duração e periodicidade) e sazonais (época do ano). A média do peso produzido dos RH por acto prestado é de 213,1 g para o Grupo III e de 3,8 g para o Grupo IV. Estima--se uma produção de RH do Grupo III na prestação de CD, em 2003, no concelho da Amadora entre 8,8 e 11,4 t e para os RH do Grupo IV um valor de 10,2 kg. Verifica-se que, por acto prestado, a produção média de resíduos do Grupo III é maior nos doentes mais idosos, nas úlceras varicosas, no pé diabético, na escara de pressão, nas situações de maior duração do tratamento e nos doentes submetidos a três tratamentos por semana. Também por acto prestado, a produção média de RH do Grupo IV é maior nos doentes mais novos, na patologia osteo-articular, na infecção, no acidente, no pós-operatório, nas situações de menor duração do tratamento e nos doentes submetidos a seis tratamentos por semana (o que está relacionado com as patologias em causa). As produções médias, por acto prestado, de ambos os grupos não apresentam relação com as variáveis idade e época do ano. Todos os RH produzidos nos actos prestados em CD, em 2003, no concelho da Amadora foram depositados nos contentores municipais. Recomendam-se acções de formação e de informação dirigidas aos profissionais de saúde e ao público em geral, a criação de condições para que os RH produzidos nos CD sejam transportados, em condições adequadas, para os centros de saúde e uma articulação entre os órgãos de gestão dos centros de saúde, a autarquia, os operadores de gestão de RH e os serviços de saúde pública no sentido de serem encontradas soluções apropriadas e inovadoras relativamente à gestão dos RH produzidos na prestação de CD.

A liberalização do mercado energético e o papel das entidades reguladoras

The liberalisation of the energy market goes back to the 1990s, when it was impelled by the European legislator. Since then, three legislative packages, temporarily successive, were approved. Those packages contained the measures to be implemented in order to deepen the internal energy market. Besides the opening up of several national markets to competition, the European legislator aimed the creation of a real internal energy market within the European Union. The unbundling regime was one of the most important steps with respect to the liberalisation process. The introduction of these rules ensured independence to the various market operators. A real and effective right of choice was granted to the consumers so they may choose their electricity and natural gas supplier. Therefore, the activity of comercialisation is subject to competition. However, some activities of the electricity’s and natural gas’ chain of value, namely the activities of transportation and distribution, were kept under regulation rules. Even though it may seem odd, the assignment of important competences and strong powers to a regulatory authority was essential in order to achieve the liberalisation process’ goals. Electricity and natural gas are essential public goods; therefore the market operators are legally bound to public service obligations, such as the security, the universality and the continuity of the supply. The performance of these obligations may become, in some cases, unprofitable for those operators. For such reason, the protection of the consumers’ rights shall only be properly defended if there is a regulatory authority that monitors the behaviour of the operators and sanctions the failure to comply with the public service obligations. Portugal, as a Member State of the European Union, transposed into the national legal order the European directives concerning the liberalisation process. This transposition has caused radical changes to the electricity and natural gas’ national markets. The Entidade Reguladora dos Serviços Energéticos also suffered various mutations in order to keep up with the regulatory demands regarding the liberalisation process.

An investigation of safety design practices of metal machines

BACKGROUND: Machinery safety issues are a challenge facing manufacturers who are supposed to create and provide products in a better and faster way. In spite of their construction and technological advance, they still contribute to many potential hazards for operators and those nearby. OBJECTIVE: The aim of this study is to investigate safety aspects of metal machinery offered for sale on Internet market according to compliance with minimum and fundamental requirements. METHODS: The study was carried out with the application of a checklist prepared on the basis of Directive 2006/42/EC and Directive 2009/104/EC and regulations enforcing them into Polish law. RESULTS: On the basis of the study it was possible to reveal the safety aspects that were not met in practice. It appeared that in the case of minimum requirements the most relevant problems concerned information, signal and control elements, technology and machinery operations, whereas as far as fundamental aspects are concerned it was hard to assure safe work process. CONCLUSIONS: In spite of the fact that more and more legal acts binding in the Member Countries of the European Union are being introduced to alleviate the phenomenon, these regulations are often not fulfilled.

Development of autonomous maintenance in a furniture company

This article presents a work performed in the maintenance department of a furniture company in Portugal, in order to develop and implement autonomous maintenance. The main objective of the project was related to the objective to increase and make effective the autonomous maintenance tasks performed by production operators, and in this way avoiding unplanned downtime due to equipment failures. Although some autonomous maintenance tasks were already carried out within the company, a preliminary study revealed weaknesses in the application of this tool. In the initial phase of this pilot project, the main problems encountered at the level of autonomous maintenance were related to the lack of time to carry out these tasks, showing that the stipulated procedures were far from the real needs of the company. To solve these problems a pilot project was conducted, making several changes in the performance of autonomous maintenance tasks, making them standard and adapted to reality of each production line. There was a general improvement in the factory indicators, and essentially there was a behavioral change, since the operators felt that their opinions were taking into account and began to understand the importance of small tasks performed by them.

Ergonomic analysis in a food packaging workplace

Work-related musculoskeletal disorders (WMSD) became one of the biggest health problems in the workplace and one of the main concerns of ergonomics and despite all the technical improvements manual handling is still an important risk factor for WMSD. The current study was performed with the main objective of conducting an ergonomic analysis in a workplace that consists in packaging products in a pallet, in a food distribution industry, also called picking. In this perspective, the aim of the study is to identify if the tasks performed by operators present any risk of WMSD and, if so, to suggest proposals for minimizing the associated effort. The methodologies of ergonomic risk assessment that were initially applied were the Risk Reckoner and the Manual Handling Assessment Chart (MAC). Subsequently, in order to, on the one hand, complement the analysis performed using the two methods previously mentioned, and, on the other hand, allow an assessment of two important risk factors associated with this activity (work postures and loads handling), two additional methodologies were also selected: the Revised NIOSH Lifting Equation and the Rapid Entire Body Assessment (REBA). In all the performed approaches, the tasks of palletizing at lower levels were identified as the ones that most penalize workers in what regards the risk of development of WMSD. All methodologies identified levels of risk that require an immediate or short-term ergonomic intervention, aiming at ensuring the safety and health of workers performing such activity. The implementation of measures designed to eliminate or minimize the risk may involve the allocation of significant human and material resources that is increasingly necessary to manage efficiently. Taking into account the complexity and variability of the developed tasks, it is recommended that such a decision can be preceded by a new study using more accurate risk assessment methodologies, such as those that use monitoring tools.

A relational algebra approach to ETL modeling

The MAP-i Doctoral Programme in Informatics, of the Universities of Minho, Aveiro and Porto

Desenvolvimento de estruturas fibrosas com comportamento auxético

Tese de Doutoramento Engenharia Têxtil

A sixth-order finite volume method for the 1D biharmonic operator: application to intramedullary nail simulation

A new very high-order finite volume method to solve problems with harmonic and biharmonic operators for one- dimensional geometries is proposed. The main ingredient is polynomial reconstruction based on local interpolations of mean values providing accurate approximations of the solution up to the sixth-order accuracy. First developed with the harmonic operator, an extension for the biharmonic operator is obtained, which allows designing a very high-order finite volume scheme where the solution is obtained by solving a matrix-free problem. An application in elasticity coupling the two operators is presented. We consider a beam subject to a combination of tensile and bending loads, where the main goal is the stress critical point determination for an intramedullary nail.

Sistema de Informação para gestão da produção e manutenção de ferramentas

Dissertação de mestrado em Engenharia de Sistemas

Implementação da manutenção autónoma numa empresa de mobiliário

Dissertação de mestrado integrado em Engenharia e Gestão Industrial

Análise de tempos e métodos e implementação de ferramentas lean num sistema produtivo

Dissertação de mestrado em Engenharia Industrial

COST Action TU1406: eBook of the 1st Workshop Meeting

COST Action TU1406 aims to address the European economic and societal needs by standardizing the condition assessment and maintenance level of roadway bridges. Currently, bridge quality control plans vary from country to country and, in some cases, within the same country. This therefore urges the establishment of a European guideline to surpass the lack of a standard methodology to assess bridge condition and to define quality control plans for roadway bridges. Such a guideline will comprise specific recommendations for assessing performance indicators as well as for the definition of performance goals, bringing together different stakeholders (e.g. universities, institutes, operators, consultants and owners) from various scientific disciplines (e.g. on-site testing, visual inspection, structural engineering, sustainability, etc.) in order to establish a common transnational language. COST Action TU1406 Workshops aim to facilitate the exchange of ideas and experiences between active researchers and practitioners as well as to stimulate discussions on new and emerging issues in line with the conference topics. This first Workshop essentially focuses on WG1 issues, namely, intends to address performance indicators, how these are assessed (e.g. visual inspection, nondestructive tests and monitoring systems), with what frequency and what values are generally obtained. The main outcomes, given in this eBook, were really important, not only for WG1 developments, but also for all the other WGs and for the Action itself.

Engenharia de embalagens: propostas de acondicionamento na indústria de autorrádios

Dissertação de mestrado em Engenharia Mecânica

Análise e simulação da produção de moldes para injeção de plásticos

Dissertação de mestrado em Engenharia Industrial