In-plane mapping of buried InGaAs quantum rings and hybridization effects on the electronic structure

This work reports the investigation on the structural differences between InAs quantum rings and their precursor quantum dots species as well as on the presence of piezoelectric fields and asymmetries in these nanostructures. The experimental results show significant reduction in the ring dimensions when the sizes of capped and uncapped ring and dot samples are compared. The iso-lattice parameter mapped by grazing-incidence x-ray diffraction has revealed the lateral extent of strained regions in the buried rings. A comparison between strain and composition of dot and ring structures allows inferring on how the ring formation and its final configuration may affect optical response parameters. Based on the experimental observations, a discussion has been introduced on the effective potential profile to emulate theoretically the ring-shape confinement. The effects of confinement and strain field modulation on electron and hole band structures are simulated by a multiband k.p calculation. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4733964]

Effect of sample pre-cracking method and notch geometry in plane strain fracture toughness tests as applied to a PMMA resin

The influence of test method factors (notch shape, square or angular, and pre-cracking method, by tapping onto or pressing a razor blade) on the results obtained in plane strain fracture toughness test according to standard ASTM D5045 using SENB specimens made of a commercial PMMA resin were investigated. Results were analyzed quantitatively by comparing the obtained K-IC values and qualitatively by observing their effect on the Moire fringes observed using photoelasticity, showing that, at 95% significance level, the K-IC values are affected by the pre-cracking method, with the most conservative value being obtained when natural pre-cracks were introduced by tapping onto a razor blade (K-IC = 1.15 +/- 0.11 MPa.m(0.5)). This correlates with a perturbation in the stress field close to the pre-crack tip observed in the photoelasticity test sample when it was introduced by pressing the razor blade. Surprisingly, notch geometry only slightly affects the results. (C) 2012 Elsevier Ltd. All rights reserved.

The expanded spectrum of neuromyelitis optica - evidences for a new definition

Neuromyelitis optica (NMO) has been traditionally described as the association of recurrent or bilateral optic neuritis and longitudinally extensive transverse myelitis (LETM). Identification of aquaporin-4 antibody (AQP4-IgG) has deeply changed the concept of NMO. A spectrum of NMO disorders (NMOSD) has been formulated comprising conditions which include both AQP4-IgG seropositivity and one of the index events of the disease (recurrent or bilateral optic neuritis and LETM). Most NMO patients harbor asymptomatic brain MRI lesions, some of them considered as typical of NMO. Some patients with aquaporin-4 autoimmunity present brainstem, hypothalamic or encephalopathy symptoms either preceding an index event or occurring isolatedly with no evidence of optic nerve or spinal involvement. On the opposite way, other patients have optic neuritis or LETM in association with typical lesions of NMO on brain MRI and yet are AQP4-IgG seronegative. An expanded spectrum of NMO disorders is proposed to include these cases.

Comparison of the area of the pharynx during wakefulness and induced sleep in patients with Obstructive Sleep Apnea (OSA)

The study of obstructive sleep apnea (OSA) has received growing attention over the past years since various aspects have not been sufficiently established. Aim: To evaluate, with the use of magnetic resonance imaging (MRI), changes in the area of the pharynx during wakefulness and induced sleep in patients with OSA. Materials and Methods: A prospective study of thirty-two patients with a polysomnographic diagnosis of OSA. All patients were submitted to MR imaging in order to obtain high-definition anatomical sagittal sequences during wakefulness and during sleep induced with Propofol. An area was defined on the sagittal plane in the midline of the pharynx. This region was called pharyngeal midplane (PMP) area. Results: A significant difference in PMP area (mm(2)) was observed between wakefulness and induced sleep in each patient (p < 0.000001). Conclusion: The patients with OSA suffer a significant reduction of 75,5 % in the area of the pharynx during induced sleep compared to wakefulness.

Systematic position of the monotypic Azorean genus Falbouria Dyte with notes on the definition of Chrysotus Meigen (Diptera: Dolichopodidae)

The systematic position and the generic status of the monotypic genus Falbouria Dyte (Dolichopodidae: Diaphorinae) are evaluated. The type-species of the genus, F. acorensis (Parent), endemic to the Azores, is re-described, and hypopygial and oviscapt morphology illustrated in detail for the first time. Falbouria is kept as a separate genus, but close to Chrysotus Meigen, which is certainly paraphyletic (or even polyphyletic) in its present composition. A brief discussion on the delimitation of Chrysotus is provided and its laesus-group of species is suggested as the core clade of the genus.

Developing a provisional definition of flare in patients with established gout

Objective Various nonvalidated criteria for disease flare have been used in studies of gout. Our objective was to develop empirical definitions for a gout flare from patient-reported features. Methods Possible elements for flare criteria were previously reported. Data were collected from 210 gout patients at 8 international sites to evaluate potential gout flare criteria against the gold standard of an expert rheumatologist definition. Flare definitions based on the presence of the number of criteria independently associated with the flare and classification and regression tree approaches were developed. Results The mean +/- SD age of the study participants was 56.2 +/- 15 years, 207 of them (98%) were men, and 54 of them (26%) had flares of gout. The presence of any patient-reported warm joint, any patient-reported swollen joint, patient-reported pain at rest score of >3 (010 scale), and patient-reported flare were independently associated with the study gold standard. The greatest discriminating power was noted for the presence of 3 or more of the above 4 criteria (sensitivity 91% and specificity 82%). Requiring all 4 criteria provided the highest specificity (96%) and positive predictive value (85%). A classification tree identified pain at rest with a score of >3, followed by patient self-reported flare, as the rule associated with the gold standard (sensitivity 83% and specificity 90%). Conclusion We propose definitions for a disease flare based on self-reported items in patients previously diagnosed as having gout. Patient-reported flare, joint pain at rest, warm joints, and swollen joints were most strongly associated with presence of a gout flare. These provisional definitions will next be validated in clinical trials.

The expanded spectrum of neuromyelitis optica: evidences for a new definition

Neuromyelitis optica (NMO) has been traditionally described as the association of recurrent or bilateral optic neuritis and longitudinally extensive transverse myelitis (LETM). Identification of aquaporin-4 antibody (AQP4-IgG) has deeply changed the concept of NMO. A spectrum of NMO disorders (NMOSD) has been formulated comprising conditions which include both AQP4-IgG seropositivity and one of the index events of the disease (recurrent or bilateral optic neuritis and LETM). Most NMO patients harbor asymptomatic brain MRI lesions, some of them considered as typical of NMO. Some patients with aquaporin-4 autoimmunity present brainstem, hypothalamic or encephalopathy symptoms either preceding an index event or occurring isolatedly with no evidence of optic nerve or spinal involvement. On the opposite way, other patients have optic neuritis or LETM in association with typical lesions of NMO on brain MRI and yet are AQP4-IgG seronegative. An expanded spectrum of NMO disorders is proposed to include these cases.

A galaxy model from Two Micron All Sky Survey star counts in the whole sky, including the plane

We use the star count model of Ortiz & Lépine to perform an unprecedented exploration of the most important Galactic parameters comparing the predicted counts with the Two Micron All Sky Survey observed star counts in the J, H, and KS bands for a grid of positions covering the whole sky. The comparison is made using a grid of lines of sight given by the HEALPix pixelization scheme. The resulting best-fit values for the parameters are: 2120 ± 200 pc for the radial scale length and 205 ± 40 pc for the scale height of the thin disk, with a central hole of 2070$_{-800}^{+2000}$ pc for the same disk, 3050 ± 500 pc for the radial scale length and 640 ± 70 pc for the scale height of the thick disk, 400 ± 100 pc for the central dimension of the spheroid, 0.0082 ± 0.0030 for the spheroid to disk density ratio, and 0.57 ± 0.05 for the oblate spheroid parameter.

A galaxy model from Two Micron All Sky Survey star counts in the whole sky, including the plane

We use the star count model of Ortiz & L´epine to perform an unprecedented exploration of the most important Galactic parameters comparing the predicted counts with the Two Micron All Sky Survey observed star counts in the J, H, and KS bands for a grid of positions covering the whole sky. The comparison is made using a grid of lines of sight given by the HEALPix pixelization scheme. The resulting best-fit values for the parameters are: 2120 ± 200 pc for the radial scale length and 205 ± 40 pc for the scale height of the thin disk, with a central hole of 2070+2000 −800 pc for the same disk, 3050 ± 500 pc for the radial scale length and 640 ± 70 pc for the scale height of the thick disk, 400 ± 100 pc for the central dimension of the spheroid, 0.0082 ± 0.0030 for the spheroid to disk density ratio, and 0.57 ± 0.05 for the oblate spheroid parameter.

A forgotten little chapter on isoperimetric inequalities. On the fraction of a convex and closed plane area lying outside a circle with which it shares a diameter

[EN]Often some interesting or simply curious points are left out when developing a theory. It seems that one of them is the existence of an upper bound for the fraction of area of a convex and closed plane area lying outside a circle with which it shares a diameter, a problem stemming from the theory of isoperimetric inequalities. In this paper such a bound is constructed and shown to be attained for a particular area. It is also shown that convexity is a necessary condition in order to avoid the whole area lying outside the circle

Image analysis in the morphological and morphometric study of teeth

The subject of this doctoral dissertation concerns the definition of a new methodology for the morphological and morphometric study of fossilized human teeth, and therefore strives to provide a contribution to the reconstruction of human evolutionary history that proposes to extend to the different species of hominid fossils. Standardized investigative methodologies are lacking both regarding the orientation of teeth subject to study and in the analysis that can be carried out on these teeth once they are oriented. The opportunity to standardize a primary analysis methodology is furnished by the study of certain early Neanderthal and preneanderthal molars recovered in two caves in southern Italy [Grotta Taddeo (Taddeo Cave) and Grotta del Poggio (Poggio Cave), near Marina di Camerata, Campania]. To these we can add other molars of Neanderthal and modern man of the upper Paleolithic era, specifically scanned in the paleoanthropology laboratory of the University of Arkansas (Fayetteville, Arkansas, USA), in order to increase the paleoanthropological sample data and thereby make the final results of the analyses more significant. The new analysis methodology is rendered as follows: 1. Standardization of an orientation system for primary molars (superior and inferior), starting from a scan of a sample of 30 molars belonging to modern man (15 M1 inferior and 15 M1 superior), the definition of landmarks, the comparison of various systems and the choice of a system of orientation for each of the two dental typologies. 2. The definition of an analysis procedure that considers only the first 4 millimeters of the dental crown starting from the collar: 5 sections parallel to the plane according to which the tooth has been oriented are carried out, spaced 1 millimeter between them. The intention is to determine a method that allows for the differentiation of fossilized species even in the presence of worn teeth. 3. Results and Conclusions. The new approach to the study of teeth provides a considerable quantity of information that can better be evaluated by increasing the fossil sample data. It has been demonstrated to be a valid tool in evolutionary classification that has allowed (us) to differentiate the Neanderthal sample from that of modern man. In a particular sense the molars of Grotta Taddeo, which up until this point it has not been possible to determine with exactness their species of origin, through the present research they are classified as Neanderthal.

Design of optical networks for advanced applications

Nowadays, computing is migrating from traditional high performance and distributed computing to pervasive and utility computing based on heterogeneous networks and clients. The current trend suggests that future IT services will rely on distributed resources and on fast communication of heterogeneous contents. The success of this new range of services is directly linked to the effectiveness of the infrastructure in delivering them. The communication infrastructure will be the aggregation of different technologies even though the current trend suggests the emergence of single IP based transport service. Optical networking is a key technology to answer the increasing requests for dynamic bandwidth allocation and configure multiple topologies over the same physical layer infrastructure, optical networks today are still “far” from accessible from directly configure and offer network services and need to be enriched with more “user oriented” functionalities. However, current Control Plane architectures only facilitate efficient end-to-end connectivity provisioning and certainly cannot meet future network service requirements, e.g. the coordinated control of resources. The overall objective of this work is to provide the network with the improved usability and accessibility of the services provided by the Optical Network. More precisely, the definition of a service-oriented architecture is the enable technology to allow user applications to gain benefit of advanced services over an underlying dynamic optical layer. The definition of a service oriented networking architecture based on advanced optical network technologies facilitates users and applications access to abstracted levels of information regarding offered advanced network services. This thesis faces the problem to define a Service Oriented Architecture and its relevant building blocks, protocols and languages. In particular, this work has been focused on the use of the SIP protocol as a inter-layers signalling protocol which defines the Session Plane in conjunction with the Network Resource Description language. On the other hand, an advantage optical network must accommodate high data bandwidth with different granularities. Currently, two main technologies are emerging promoting the development of the future optical transport network, Optical Burst and Packet Switching. Both technologies respectively promise to provide all optical burst or packet switching instead of the current circuit switching. However, the electronic domain is still present in the scheduler forwarding and routing decision. Because of the high optics transmission frequency the burst or packet scheduler faces a difficult challenge, consequentially, high performance and time focused design of both memory and forwarding logic is need. This open issue has been faced in this thesis proposing an high efficiently implementation of burst and packet scheduler. The main novelty of the proposed implementation is that the scheduling problem has turned into simple calculation of a min/max function and the function complexity is almost independent of on the traffic conditions.

Definition, realization and evaluation of a software reference architecture for use in space applications

A recent initiative of the European Space Agency (ESA) aims at the definition and adoption of a software reference architecture for use in on-board software of future space missions. Our PhD project placed in the context of that effort. At the outset of our work we gathered all the industrial needs relevant to ESA and all the main European space stakeholders and we were able to consolidate a set of technical high-level requirements for the fulfillment of them. The conclusion we reached from that phase confirmed that the adoption of a software reference architecture was indeed the best solution for the fulfillment of the high-level requirements. The software reference architecture we set on building rests on four constituents: (i) a component model, to design the software as a composition of individually verifiable and reusable software units; (ii) a computational model, to ensure that the architectural description of the software is statically analyzable; (iii) a programming model, to ensure that the implementation of the design entities conforms with the semantics, the assumptions and the constraints of the computational model; (iv) a conforming execution platform, to actively preserve at run time the properties asserted by static analysis. The nature, feasibility and fitness of constituents (ii), (iii) and (iv), were already proved by the author in an international project that preceded the commencement of the PhD work. The core of the PhD project was therefore centered on the design and prototype implementation of constituent (i), a component model. Our proposed component model is centered on: (i) rigorous separation of concerns, achieved with the support for design views and by careful allocation of concerns to the dedicated software entities; (ii) the support for specification and model-based analysis of extra-functional properties; (iii) the inclusion space-specific concerns.