A new type of high-order elements based on the mesh-free interpolations

We propose a new type of high-order elements that incorporates the mesh-free Galerkin formulations into the framework of finite element method. Traditional polynomial interpolation is replaced by mesh-free interpolations in the present high-order elements, and the strain smoothing technique is used for integration of the governing equations based on smoothing cells. The properties of high-order elements, which are influenced by the basis function of mesh-free interpolations and boundary nodes, are discussed through numerical examples. It can be found that the basis function has significant influence on the computational accuracy and upper-lower bounds of energy norm, when the strain smoothing technique retains the softening phenomenon. This new type of high-order elements shows good performance when quadratic basis functions are used in the mesh-free interpolations and present elements prove advantageous in adaptive mesh and nodes refinement schemes. Furthermore, it shows less sensitive to the quality of element because it uses the mesh-free interpolations and obeys the Weakened Weak (W2) formulation as introduced in [3, 5].

Integration and optimization of pressure retarded osmosis with reverse osmosis for power generation and high efficiency desalination

Salinity gradient power is proposed as a source of renewable energy when two solutions of different salinity are mixed. In particular, Pressure Retarded Osmosis (PRO) coupled with a Reverse Osmosis process (RO) has been previously suggested for power generation, using RO brine as the draw solution. However, integration of PRO with RO may have further value for increasing the extent of water recovery in a desalination process. Consequently, this study was designed to model the impact of various system parameters to better understand how to design and operate practical PRO-RO units. The impact of feed salinity and recovery rate for the RO process on the concentration of draw solution, feed pressure, and membrane area of the PRO process was evaluated. The PRO system was designed to operate at maximum power density of . Model results showed that the PRO power density generated intensified with increasing seawater salinity and RO recovery rate. For an RO process operating at 52% recovery rate and 35 g/L feed salinity, a maximum power density of 24 W/m2 was achieved using 4.5 M NaCl draw solution. When seawater salinity increased to 45 g/L and the RO recovery rate was 46%, the PRO power density increased to 28 W/m2 using 5 M NaCl draw solution. The PRO system was able to increase the recovery rate of the RO by up to 18% depending on seawater salinity and RO recovery rate. This result suggested a potential advantage of coupling PRO process with RO system to increase the recovery rate of the desalination process and reduce brine discharge.

NORDEK : A Plan for Increased Nordic Economic Co-operation and Integration 1968-1970

For the first time the attempt of Denmark, Finland, Norway and Sweden to increase Nordic economic co-operation and integration (NORDEK 1968-1970) is analysed by using records from the four governments archives and interviews with central actors participating. A dominating argument has until now been that dynamics in Nordic economic integration is different from dynamics in European integration. This archive based study disproves the myth however of ideological Nordism and of short term political developments outside Norden as most important for the NORDEK initiative. The NORDEK initiative was actually more a consequence of a long term socioeconomic and socio-political path dependant process. The study also disproves the myth that the NORDEK plan was a political and ideological symbol without socioeconomic substance. The purpose with NORDEK was to create a better basis for generating economic growth and social welfare. The proposed NORDEK institutions were therefore developed to promote economic progress. The study finally shows that the NORDEK failure in 1970 was not a result of lacking economic rationale or incompatible economic interests. The failure was a result of a power struggle in Finnish domestic policy and lacking political will in the other Nordic countries to continue without Finland.

Regional Integration and the State : The Changing Nature of Sovereignty in Southern Africa and Europe

The study explores the role of the state in regional integration processes. The question is approached through theoretical discussion and two case-studies - SADC (Southern African Development Community) and the EU. The main research question of the study is, what are the possibilities and problems of the integration process in Southern Africa and how do they differ from the possibilities and problems of the integration process in Europe. The undelrying question of the study is why do states decide to participate in an integration process where they have to limit their sovereignty. Review of the theoretical discussion of the integration studies shows that the integration process is affected by several factors on different levels of the international system. But the state plays a central role in integration processes - integration processes are inititated and carried on by the participatig states. The European integration process shows that the interests of the state can change over time. At the beginning of the integration process, the objective was to strengthen participating states. Later EU member states have decided that it is in their interest to deepen the process even if it has meant limitation of their sovereignty. The determinant factor has been that the member states have considered it to be in their interst to deepen the process. In Southern Africa the integration process is only at the beginning. SADC aims to establish a free trade area by 2008. The biggest challenge is how to implement the integration process so that it benefits all member states in a region that is economically dominated by South Africa. In practice this can be achieved through establishment of corrective mechanisms, which ensure equitable distribution of benefits. This would require deeper integration and South Africa to adapt responsibility towards its regional partners. African integration processes in general have not been as successful as for example the EU. African states have been reluctant to limit their sovereignty in favour of regional organisations.This can be explained by the differences between European and African states. The EU member states have been democracies while African states have been characterised by concentration of power in the executive branch. Furthermore the political systems in Africa have been characterised by vertical clientelist reltionships. As a result it has not been in the interest of the political elite to limit the state sovereignty in favour of regional organisations. In recent years SADC has been relatively succesful in its integration process and reforms, but a lot remains to be done before the implementation of the free trade area can be succesful. The institutional structure and treaties of SADC differ from the structures of the EU. Member states are the main actors of the integration processes. Their differences are reflected in the process and produce different kinds of integration in different parts of the world.

Mathematical modelling and numerical simulation of phosphine flow during grain fumigation in leaky cylindrical silos

The phosphine distribution in a cylindrical silo containing grain is predicted. A three-dimensional mathematical model, which accounts for multicomponent gas phase transport and the sorption of phosphine into the grain kernel is developed. In addition, a simple model is presented to describe the death of insects within the grain as a function of their exposure to phosphine gas. The proposed model is solved using the commercially available computational fluid dynamics (CFD) software, FLUENT, together with our own C code to customize the solver in order to incorporate the models for sorption and insect extinction. Two types of fumigation delivery are studied, namely, fan- forced from the base of the silo and tablet from the top of the silo. An analysis of the predicted phosphine distribution shows that during fan forced fumigation, the position of the leaky area is very important to the development of the gas flow field and the phosphine distribution in the silo. If the leak is in the lower section of the silo, insects that exist near the top of the silo may not be eradicated. However, the position of a leak does not affect phosphine distribution during tablet fumigation. For such fumigation in a typical silo configuration, phosphine concentrations remain low near the base of the silo. Furthermore, we find that half-life pressure test readings are not an indicator of phosphine distribution during tablet fumigation.

Essays on Economic Integration and Labour Demand

This dissertation consists of an introductory section and three essays investigating the effects of economic integration on labour demand by using theoretical models and by empirical analysis. The essays adopt an intra-industry trade approach to specify a theoretical framework of estimation for determining the effects of economic integration on employment. In all the essays the empirical aim is to explore the labour demand consequences of European integration. The first essay analyzes how labour-demand elasticities with own price have changed during the process of economic integration. As a theoretical result, intensified trade competition increases labour-demand elasticity, whereas better advantage of economies of scale decreases labour-demand elasticity by decreasing the elasticity of substitution between differentiated products. Furthermore, if integration gives rise to an increase in input-substitutability and/or outsourcing activities, labour demand will become more elastic. Using data from the manufacturing sector from 1975 to 2002, the empirical results provide support for the hypothesis that European integration has contributed to increased elasticities of total labour demand in Finland. The second essay analyzes how economic integration affects the impact of welfare poli-cies on employment. The essay considers the viability of financing the public sector, i.e. public consumption and social security expenses, by general labour taxation in an economy which has become more integrated into international product markets. The theoretical results of the second essay indicate that, as increased trade competition crowds out better economies of scale, it becomes more costly to maintain welfare systems financed by labour taxation. Using data from European countries for the years 1975 to 2004, the empirical results provide inconsistent evidence for the hypothesis that economic integration has contributed to the distortion effects of welfare policies on employment. The third essay analyzes the impact of profit sharing on employment as a way to introduce wage flexibility into the process of economic integration. The results of the essay suggest that, in theory, the effects of economic integration on the impact of profit sharing on employment clearly depend on a trade-off between intensified competition and better advantage of economies of scale. If product market competition increases, the ability of profit sharing to improve employment through economic integration increases with moderated wages. While, the economic integration associating with market power in turn decrease the possibilities of profit sharing with higher wages to improve employment. Using data from the manufacturing sector for the years 1996 to 2004, the empirical results show that profit-sharing has a positive impact on employment during the process of European integration, but can have ambiguous effects on the stability of employment in Finland.

Numerical study on the surface depression of the concrete runway pavement under impact load

Airport runway pavement always subjected to huge impact loading due to the hard landing of aircraft on the pavement surface. Therefore runway pavements should have sufficient impact resistance capability to avoid damage causing by hard impact like surface deflection in downward or penetration since the repair works is cumbersome within the operating condition of airport and also increases the service life cost of the pavement structure. Several research works have been carried out on airport runway pavement to measure the present condition of pavement and also to predict future performance of it. However, most of the works are confined by pavement response under moving aircraft loading. Nevertheless, no comprehensive research work is yet conducted to identify the controlling factors which might have significant effect in changing the common pavements damage like surface penetration depth under impact of aircraft. Therefore, a 3D FE study is conducted to determine some effective factors in controlling the top surface penetration depth of runway pavement. Among the exterior factors, mass of the impactor, velocity of the impactor, impact angle and boundary conditions are selected and as interior factors, thickness of the runway pavement, compressive strength and density of materials used in the runway pavement are selected.

A numerical method for separation of stresses in photo-orthotropic elasticity

A numerical method is suggested for separation of stresses in photo-orthotropic elasticity using the numerical solution of compatibility equation for orthotropic case. The compatibility equation is written in terms of a stress parameter S analogous to the sum of principal stresses in two-dimensional isotropic case. The solution of this equation provides a relation between the normal stresses. The photoelastic data give the shear stress and another relation between the two normal stresses. The accuracy of the numerical method and its application to practical problems are illustrated with examples.

An absolute digital positioning numerical control system

A module containing all the functional components required for a digital absolute positioning process of one axis of a machine tool has been designed and constructed. Circuit realization makes use of integrated circuit elements.

On the integration of self-tracking data amongst quantified self members

Self-tracking, the process of recording one's own behaviours, thoughts and feelings, is a popular approach to enhance one's self-knowledge. While dedicated self-tracking apps and devices support data collection, previous research highlights that the integration of data constitutes a barrier for users. In this study we investigated how members of the Quantified Self movement---early adopters of self-tracking tools---overcome these barriers. We conducted a qualitative analysis of 51 videos of Quantified Self presentations to explore intentions for collecting data, methods for integrating and representing data, and how intentions and methods shaped reflection. The findings highlight two different intentions---striving for self-improvement and curiosity in personal data---which shaped how these users integrated data, i.e. the effort required. Furthermore, we identified three methods for representing data---binary, structured and abstract---which influenced reflection. Binary representations supported reflection-in-action, whereas structured and abstract representations supported iterative processes of data collection, integration and reflection. For people tracking out of curiosity, this iterative engagement with personal data often became an end in itself, rather than a means to achieve a goal. We discuss how these findings contribute to our current understanding of self-tracking amongst Quantified Self members and beyond, and we conclude with directions for future work to support self-trackers with their aspirations.

Numerical study of heat transfer in laminar film boiling by the finite-difference method

The finite-difference form of the basic conservation equations in laminar film boiling have been solved by the false-transient method. By a judicious choice of the coordinate system the vapour-liquid interface is fitted to the grid system. Central differencing is used for diffusion terms, upwind differencing for convection terms, and explicit differencing for transient terms. Since an explicit method is used the time step used in the false-transient method is constrained by numerical instability. In the present problem the limits on the time step are imposed by conditions in the vapour region. On the other hand the rate of convergence of finite-difference equations is dependent on the conditions in the liquid region. The rate of convergence was accelerated by using the over-relaxation technique in the liquid region. The results obtained compare well with previous work and experimental data available in the literature.

Vibrations of Multifiber Composite Shells-Some Numerical Results

A study of vibrations of multifiber composite shells is presented. Special attention is paid to the effect of composition of different fibers on the frequency spectrum of a freely vibrating cylindrical shell. The numerical results indicate clustering of frequency spectrum of a freely vibrating cylindrical composite shell as compared with the isotropic shell, and the spectrum varies considerably with the composition of the constituent materials.

Experimental and numerical studies of hollow flange channel beams subject to web crippling under ETF and ITF load cases

This paper presents the details of experimental and numerical studies on the web crippling behaviour of hollow flange channel beams, known as LiteSteel beams (LSB). The LSB has a unique shape of a channel beam with two rectangular hollow flanges, made using a unique manufacturing process. Experimental and numerical studies have been carried out to evaluate the behaviour and design of LSBs subject to pure bending actions, predominant shear actions and combined actions. To date, however, no investigation has been conducted into the web crippling behaviour and strength of LSB sections under ETF and ITF load conditions. Hence experimental studies consisting of 28 tests were first conducted in this research to assess the web crippling behaviour and strengths of LSBs under two flange load cases (ETF and ITF). Experimental web crippling capacity results were then compared with the predictions from AS/NZS 4600 and AISI S100 design rules, which showed that AS/NZS 4600 and AISI S100 design equations are very unconservative for LSBs under ETF and ITF load cases. Hence improved equations were proposed to determine the web crippling capacities of LSBs. Finite element models of the tested LSBs were then developed, and used to determine the elastic buckling loads of LSBs under ETF and ITF load cases. New equations were proposed to determine the corresponding elastic buckling coefficients of LSBs. Finally suitable design rules were also developed under the Direct Strength Method format using the test results and buckling analysis results from finite element analyses.

Numerical modelling of rivet fastened rectangular hollow flange channel beams subject to shear

The intermittently rivet fastened Rectangular Hollow Flange Channel Beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange beams. Many experimental and numerical studies have been carried out in the past to investigate the shear behaviour of lipped channel beams. However, no research has been undertaken on the shear behaviour of rivet fastened RHFCBs. Therefore experimental and numerical studies were undertaken to investigate the shear behaviour and strength of rivet fastened RHFCBs. In this research finite element models of rivet fastened RHFCBs were developed to investigate their nonlinear shear behaviour including their buckling characteristics and ultimate shear strength. This paper presents the details of the finite element models of rivet fastened RHFCBs and the results. Both finite element analysis and experimental results showed that the current design rules are very conservative for the shear design of rivet fastened RHFCBs. Appropriate improvements have been proposed for the design rules of shear strength of rivet fastened RHFCBs within the Direct Strength Method format.

Thermal performance of magnesium oxide wall board using numerical modelling

Fire resistance of light-gauge steel frame (LSF) walls can be enhanced by lining them with single or multiple layers of wall boards. This research is focused on the thermal per-formance of Magnesium Oxide (MgO) wall boards in comparison to the conventional gypsum plasterboards exposed to standard fire on one side. Thermal properties of MgO board and gypsum plasterboard were measured first and then used in the finite element heat transfer models of the two types of panels. The measured thermal property results show that MgO board will perform better than the gypsum plasterboards due to its higher specific heat values at elevated temperatures. However, MgO board loses 50% of its ini-tial mass at about 500 °C compared to 16% for gypsum plasterboard. The developed finite element models were validated using the fire test results of gypsum plasterboards and then used to study the thermal performance of MgO board panels. Finite element analysis re-sults show that when MgO board panels are exposed to standard fire on one side the rate of temperature rise on the ambient side is significantly reduced compared to gypsum plas-terboard. This has the potential to improve the overall thermal performance of MgO board lined LSF walls and their fire resistance levels (FRL). However, full scale fire tests are needed to confirm this. This paper presents the details of this investigation and the results.