Mathematical modelling of supercritical CO2 extraction of volatile oils from aromatic plants

The modelling of the experimental data of the extraction of the volatile oil from six aromatic plants (coriander, fennel, savoury, winter savoury, cotton lavender and thyme) was performed using five mathematical models, based on differential mass balances. In all cases the extraction was internal diffusion controlled and the internal mass transfer coefficienty (k(s)) have been found to change with pressure, temperature and particle size. For fennel, savoury and cotton lavender, the external mass transfer and the equilibrium phase also influenced the second extraction period, since k(s) changed with the tested flow rates. In general, the axial dispersion coefficient could be neglected for the conditions studied, since Peclet numbers were high. On the other hand, the solute-matrix interaction had to be considered in order to ensure a satisfactory description of the experimental data.

Assessment of fungal contamination in a group of Lisbon's gymnasiums with a swimming pool

The study’s main purpose was the assessment of the environmental fungal contamination, the exploration of possible associations between related environmental variables and the study of the relationship between fungal contamination of air and surfaces. A descriptive study was developed based upon air and surfaces monitoring for fungal contamination in ten indoor gymnasiums with a swimming pool located in Lisbon’s urban area. Fifty 200 litres air samples and 120 surface swabs were collected. Surfaces samples were collected before and after cleaning and disinfection and temperature and relative humidity values were registered during the collection period. Twenty five different species of fungi were identified in the air samples, being the three most commonly isolated genera the following: Cladosporium (36.6%), Penicillium (19.0%) and Aspergillus (10.2%). Thirty-seven different species of fungi were identified in the surface samples. Fusarium sp. was the most frequent genera before (19.1%) and after (17.2%) cleaning and disinfection. There was a significant association between the numbers of visitors and the fungal contamination determined in the surface samples (p<0.05). There was no significant association (p>0.05) between the contamination encountered in the air samples and the one registered in the surface samples and between the fungal contamination and the temperature or relative humidity measured on location. The data obtained enabled the assessment of the establishment’s fungal contamination and led the authors to conclude, consequently, that physical activity, which generally promotes health, can in fact be challenged by this factor.

Comparison of fungal contamination between hospitals and companies food units

A descriptive study was developed to compare air and surfaces fungal contamination in ten hospitals’ food units and two food units from companies. Fifty air samples of 250 litres through impaction method were collected from hospitals’ food units and 41 swab samples from surfaces were also collected, using a 10 by 10 cm square stencil. Regarding the two companies, ten air samples and eight surface samples were collected. Air and surface samples were collected in food storage facilities, kitchen, food plating and canteen. Outdoor air was also collected since this is the place regarded as a reference. Simultaneously, temperature, relative humidity and meal numbers were registered. Concerning air from hospitals’ food units, 32 fungal species were identified, being the two most commonly isolated genera Penicillium sp.

Caracterização da amostra portuguesa da área da saúde na Web of Science

Introdução: A produção e o uso da literatura científica são analisados, quantificados e interpretados pela bibliometria, ciência utilizada para estudos métricos da informação publicada e que estuda as questões relacionadas com a comunicação científica e a atividade científica. Objetivo: O estudo apresentado é uma análise bibliométrica da produção científica portuguesa da área da saúde indexada na Web of Science. Métodos: Analisa-se a produção referente ao período entre 1992 e final de 2011. A análise da produção científica centrou-se nas seguintes variáveis: categorias de classificação da Web of Science, tipologia de documentos indexados, títulos de revistas, distribuição por anos de publicação, afiliação institucional, idiomas, países de origem dos autores com quem foram estabelecidas relações de parceria científica e quem facultou os financiamentos à investigação científica. Resultados: Foram contabilizados 34.208 trabalhos. Destes, o artigo é a forma mais utilizada pelos autores portugueses para a divulgação dos resultados de investigação (58,5%). A década mais recente é contemplada com 75,4% dos registos. A maioria da produção com visibilidade internacional é oriunda de universidades e de centros de investigação hospitalar; institutos, laboratórios da indústria farmacêutica e universidades estrangeiras têm valores residuais. A colaboração com outros investigadores internacionais destaca-se no caso da Europa (73,2%). O financiamento da investigação científica é suportado basicamente pela Fundação para a Ciência e Tecnologia (59,5%), seguida da Comissão Europeia (17,8%). O inglês é o idioma mais usado para a divulgação dos resultados de investigação nacional na área da saúde (97,8%). Conclusões: O uso de bases de dados ou de plataformas científicas para estudos bibliométricos é um processo moroso e difícil. O total de trabalhos em análise foi sempre o mesmo mas, em algumas variáveis, os valores não coincidem, quer porque alguns dos registos foram classificados em mais do que uma categoria temática, quer pelos trabalhos multidisciplinares oriundos das mesmas instituições, quer pelos trabalhos de colaboração internacional. Também no presente estudo os artigos são o veículo privilegiado para a divulgação dos resultados científicos. Apontamento final: deve encorajar-se a utilização de outras plataformas científicas e de outras bases de dados para uma mais completa recuperação da produção científica nacional na área da saúde. Introduction: The production and the use of the scientific literature are analyzed, quantified and interpreted by bibliometry. Bibliometry is the science used in published information metric studies and studies the questions of scientific communication and the scientific production. Aim of the study: This study presents a bibliometric analysis of the indexed Web of Science Portuguese scientific production in the health field. Methods: We analyzed the production from 1992 to the end of 2011. This analysis focused in several variables: general categories areas of Web of Science, indexed document types, source titles, publication years, group/corporate authors, languages, identification of the countries with scientific partnerships and identification of the funding agencies for scientific research. Results: We found 34.208 works. From this, the article is the most common channel for disseminating the research results (58.5%). The most recent decade has 75.4% of the total of records. Most of the production with international visibility becomes from universities and hospital research centers; institutes, pharmaceutical labs or foreign universities have residual values. Collaborating with other international researchers is very common, particularly with Europe (73.2%). In general, the Fundação para a Ciência e Tecnologia supports the scientific research (59.5%), followed by the European Commission (17.8%). The language commonly used for disseminating the research results in health is the English (97.8%). Conclusions: Using databases or scientific platforms for bibliometric studies is a hard and difficult process. The total of works analyzed was always the same but, with some variables, the numbers does not coincide: a) some of the registries were classified in several categories; b) some of the multidisciplinary works were from the same institution; c) the large number of international partnership. In this study, articles are the privileged way for disseminating the scientific results. A last thought: the use of other scientific platforms and databases should be encouraged for a more complete retrieval of the national research production in health.

Caracterização da amostra portuguesa da área da saúde na Web of Science

Introdução: A produção e o uso da literatura científica são analisados, quantificados e interpretados pela bibliometria, ciência utilizada para estudos métricos da informação publicada e que estuda as questões relacionadas com a comunicação científica e a atividade científica. Objetivo: O estudo apresentado é uma análise bibliométrica da produção científica portuguesa da área da saúde indexada na Web of Science. Métodos: Analisa-se a produção referente ao período entre 1992 e final de 2011. A análise da produção científica centrou-se nas seguintes variáveis: categorias de classificação da Web of Science, tipologia de documentos indexados, títulos de revistas, distribuição por anos de publicação, afiliação institucional, idiomas, países de origem dos autores com quem foram estabelecidas relações de parceria científica e quem facultou os financiamentos à investigação científica. Resultados: Foram contabilizados 34.208 trabalhos. Destes, o artigo é a forma mais utilizada pelos autores portugueses para a divulgação dos resultados de investigação (58,5%). A década mais recente é contemplada com 75,4% dos registos. A maioria da produção com visibilidade internacional é oriunda de universidades e de centros de investigação hospitalar; institutos, laboratórios da indústria farmacêutica e universidades estrangeiras têm valores residuais. A colaboração com outros investigadores internacionais destaca-se no caso da Europa (73,2%). O financiamento da investigação científica é suportado basicamente pela Fundação para a Ciência e Tecnologia (59,5%), seguida da Comissão Europeia (17,8%). O inglês é o idioma mais usado para a divulgação dos resultados de investigação nacional na área da saúde (97,8%). Conclusões: O uso de bases de dados ou de plataformas científicas para estudos bibliométricos é um processo moroso e difícil. O total de trabalhos em análise foi sempre o mesmo mas, em algumas variáveis, os valores não coincidem, quer porque alguns dos registos foram classificados em mais do que uma categoria temática, quer pelos trabalhos multidisciplinares oriundos das mesmas instituições, quer pelos trabalhos de colaboração internacional. Também no presente estudo os artigos são o veículo privilegiado para a divulgação dos resultados científicos. Apontamento final: deve encorajar-se a utilização de outras plataformas científicas e de outras bases de dados para uma mais completa recuperação da produção científica nacional na área da saúde. Introduction: The production and the use of the scientific literature are analyzed, quantified and interpreted by bibliometry. Bibliometry is the science used in published information metric studies and studies the questions of scientific communication and the scientific production. Aim of the study: This study presents a bibliometric analysis of the indexed Web of Science Portuguese scientific production in the health field. Methods: We analyzed the production from 1992 to the end of 2011. This analysis focused in several variables: general categories areas of Web of Science, indexed document types, source titles, publication years, group/corporate authors, languages, identification of the countries with scientific partnerships and identification of the funding agencies for scientific research. Results: We found 34.208 works. From this, the article is the most common channel for disseminating the research results (58.5%). The most recent decade has 75.4% of the total of records. Most of the production with international visibility becomes from universities and hospital research centers; institutes, pharmaceutical labs or foreign universities have residual values. Collaborating with other international researchers is very common, particularly with Europe (73.2%). In general, the Fundação para a Ciência e Tecnologia supports the scientific research (59.5%), followed by the European Commission (17.8%). The language commonly used for disseminating the research results in health is the English (97.8%). Conclusions: Using databases or scientific platforms for bibliometric studies is a hard and difficult process. The total of works analyzed was always the same but, with some variables, the numbers does not coincide: a) some of the registries were classified in several categories; b) some of the multidisciplinary works were from the same institution; c) the large number of international partnership. In this study, articles are the privileged way for disseminating the scientific results. A last thought: the use of other scientific platforms and databases should be encouraged for a more complete retrieval of the national research production in health.

Educational characteristics of adult students in portuguese technological schools

Despite a massive expansion of education in Portugal, since the 1970’s, educational attainment of the adult population in the country remains low. The numbers of working-age people in some form of continuing education are among the lowest, according to the OECD and EU-27 statistics. Technological Schools(TS), initially created in the 1990’s, under the umbrella of the Ministry of Economy in partnership with industry and industrial associations, aimed to prepare qualified staff for industries and services in the country, particularly in the engineering sector, through the provision of post secondary non-university programmes of studies, the CET (Technological Specialization Courses). Successful CET students are awarded a DET(Diploma of Technological Specialization), which corresponds to Vocational Qualification level IV of the EU, according to the latest alteration (2005) of the Education Systems Act (introduced in 1986). In this, CET’s are also clearly defined as one of the routes for access to Higher Education (HE), in Portugal. The PRILHE (Promoting Reflective and Independent Learning in Higher Education) multinational project, funded by the European Socrates Grundtvig Programme, aimed to identify the learning processes which enable adult students in higher education to become autonomous reflective learners and search best practices to support these learning processes. During this research, both quantitative and qualitative methods were used to determine how students organise their studies and develop their learning skills. The Portuguese partner in the project’ consortium used a two case studies approach, one with students of Higher Education Institutions and other with students of TS. This paper only applies to students of TS, as these have a predominant bias towards engineering. Results show that student motivation and professional teaching support contribute equally to the development of an autonomous and reflective approach to learning in adult students; this is essential for success in a knowledge economy, where lifelong learning is the key to continuous employment.

Implications of the LHC two-photon signal for two-Higgs-doublet models

We study the implications for two-Higgs-doublet models of the recent announcement at the LHC giving a tantalizing hint for a Higgs boson of mass 125 GeV decaying into two photons. We require that the experimental result be within a factor of 2 of the theoretical standard model prediction, and analyze the type I and type II models as well as the lepton-specific and flipped models, subject to this requirement. It is assumed that there is no new physics other than two Higgs doublets. In all of the models, we display the allowed region of parameter space taking the recent LHC announcement at face value, and we analyze the W+W-, ZZ, (b) over barb, and tau(+)tau(-) expectations in these allowed regions. Throughout the entire range of parameter space allowed by the gamma gamma constraint, the numbers of events for Higgs decays into WW, ZZ, and b (b) over bar are not changed from the standard model by more than a factor of 2. In contrast, in the lepton-specific model, decays to tau(+)tau(-) are very sensitive across the entire gamma gamma-allowed region.

Microbiological quality of drinking water of urban and rural communities, Brazil

OBJECTIVE: To evaluate the microbiological quality of treated and untreated water samples came from urban and rural communities and to examine the relationship between coliforms occurrence and average water temperature, and a comparison of the rainfall levels. METHODS: A sample of 3,073 untreated and treated (chlorinated) water from taps (1,594), reservoir used to store treated water (1,033), spring water (96) and private well (350) collected for routine testing between 1996 and 1999 was analyzed by the multiple dilution tube methods used to detect the most probable number of total and fecal coliforms. These samples were obtained in the region of Maringá, state of Paraná, Brazil. RESULTS: The highest numbers water samples contaminated by TC (83%) and FC (48%) were found in the untreated water. TC and FC in samples taken from reservoirs used to store treated water was higher than that from taps midway along distribution lines. Among the treated water samples examined, coliform bacteria were found in 171 of the 1,033 sampling reservoirs. CONCLUSIONS: Insufficient treatment or regrowth is suggested by the observation that more than 17% of these treated potable water contained coliform. TC and FC positive samples appear to be similar and seasonally influenced in treated water. Two different periods must be considered for the occurrence of both TC and FC positive samples: (i) a warm-weather period (September-March) with high percentage of contaminated samples; and (ii) cold-weather period (April-August) were they are lower. Both TC and TF positive samples declined with the decreased of water temperature.

Can varying the number of teams in a shift schedule constitute a preventive strategy?

OBJECTIVE: The study examines the implications for shiftworkers of applying different numbers of teams in the organization of shiftwork. METHODS: The participating operators came from five different companies applying continuous shift rotation systems. The companies shared the same product organization and a common corporate culture belonging to the same multinational company. Each company had a shift system consisting of four, five or six teams, with the proportion of shifts outside day work decreasing as the number of teams increased. Questionnaire and documentary data were used as data sources. RESULTS: Operators in systems with additional teams had more daywork but also more irregular working hours due to both overtime and schedule changes. Operators using six teams used fewer social compensation strategies. Operators in four teams were most satisfied with their work hours. Satisfaction with the time available for various social activities outside work varied inconsistently between the groups. CONCLUSIONS: In rotating systems the application of more teams reduces the number of shifts outside day work. This apparent improvement for shiftworkers was counteracted by a concomitant irregularity produced by greater organizational requirements for flexibility. The balance of this interaction was found to have a critical impact on employees.

Peculiarities of the professional education and qualification appraisal of assistants of pharmacists in Lithuania

Following the alterations and additions to the pharmaceutical law of Lithuanian Republic the pharmaceutical activity in Lithuanian pharmacies is carried out by pharmacy specialists – pharmacists and pharmacy assistants (pharmacy technicians). The ability of pharmacy specialists to adapt, to improve and to develop their competencies is one of the success preconditions for Lithuanian health care pharmacy sector. Work aim: to investigate the changes among the specialists employed in pharmacies and pharmacy sector as well as to highlight the necessity to develop the qualification of pharmacy assistants (pharmacy technicians) according to the modern pharmaceutical legal basis in Lithuania. In 2008–2011 the research in Lithuanian pharmacy sector was performed which identified the changes in the numbers of pharmacies and their staff: the number of pharmacies decreased, while the number of pharmacists increased and the number of the assistants of pharmacists (pharmacy technicians) decreased. The decrease in the number of the assistants of pharmacists (pharmacy technicians) and the danger of their extinction in the future has been identified. The qualification appraisal for pharmacy assistants (pharmacy technicians) is implemented through the leveling studies at the Pharmacy technique department at the Health care faculty of Kauno Kolegija University of applied sciences and pharmacy study programme at the faculty of Pharmacy of Medical Academy at Lithuanian University of Health Sciences. 75 % of respondents use their own money to pay for the qualification appraisal, and 25 % of respondents get financial support for the qualification appraisal activities from the pharmacy managers.

Resistance to β-lactams in bacteria isolated from different types of Portuguese cheese

The purpose of this study was to investigate the presence of beta-lactam-resistant bacteria in six different types of Portuguese cheese. The numbers of ampicillin resistant (AMP(r)) bacteria varied from 4.7 x 10(2) to 1.5 x 10(7) CFU/g. Within 172 randomly selected beta-lactam-resistant bacteria, 44 resistant phenotypes were found and 31.4% were multidrug resistant. The majority (85%) of the isolates identified belonged to the Enterobacteriaceae family. The presence of the bla(TEM) gene was detected in 80.9% of the tested isolates. The results suggest that without thermal processing of the milk and good hygienic practices, cheese may act as a vehicle of transfer of beta-lactam-resistant bacteria to the gastrointestinal tract of consumers.

Conjetura de Goldbach: uma visão aritmética

Dissertação de Mestrado, Matemática para Professores, 1 de Novembro de 2013, Universidade dos Açores.

Effects of density versus size on grazing by a key exploited herbivore

Fishing decreases the biomass of target species via reduction in the numbers and/or size of individuals. In natural systems, the strength of biological interactions, including predator-prey dynamics, are often density or size-dependent. Hence, changes in the numbers or size of key taxa may be expected to influence biological interactions but their effects do not need to be identical. Here we compare the effects of biomass reduction in populations of the exploited limpet Patella candei. Biomass removal was experimentally achieved by either removing individuals (density reduction) or by replacing large by small individuals (size reduction), while controlling for total limpet biomass in a laboratory-based experiment. At the experiment’s termination, biomass reduction led to proportional changes in area grazed. However, there was no difference whether this was achieved via changes in density or in size. Furthermore, no discernible effects of treatments were evident on different components of the algal assemblage. A field survey also revealed that P. candei biomass explained a greater proportion in variation in the area free of algae than density alone. Our results suggest that loss of biomass in populations of P. candei has quantitatively and qualitatively similar effects on algal cover regardless of whether it is caused by an equivalent (biomass) reduction in the numbers or size of individuals.

The use of non-standard CT conversion ramps for Monte Carlo verification of 6 MV prostate IMRT plans

Monte Carlo (MC) dose calculation algorithms have been widely used to verify the accuracy of intensity-modulated radiotherapy (IMRT) dose distributions computed by conventional algorithms due to the ability to precisely account for the effects of tissue inhomogeneities and multileaf collimator characteristics. Both algorithms present, however, a particular difference in terms of dose calculation and report. Whereas dose from conventional methods is traditionally computed and reported as the water-equivalent dose (Dw), MC dose algorithms calculate and report dose to medium (Dm). In order to compare consistently both methods, the conversion of MC Dm into Dw is therefore necessary. This study aims to assess the effect of applying the conversion of MC-based Dm distributions to Dw for prostate IMRT plans generated for 6 MV photon beams. MC phantoms were created from the patient CT images using three different ramps to convert CT numbers into material and mass density: a conventional four material ramp (CTCREATE) and two simplified CT conversion ramps: (1) air and water with variable densities and (2) air and water with unit density. MC simulations were performed using the BEAMnrc code for the treatment head simulation and the DOSXYZnrc code for the patient dose calculation. The conversion of Dm to Dw by scaling with the stopping power ratios of water to medium was also performed in a post-MC calculation process. The comparison of MC dose distributions calculated in conventional and simplified (water with variable densities) phantoms showed that the effect of material composition on dose-volume histograms (DVH) was less than 1% for soft tissue and about 2.5% near and inside bone structures. The effect of material density on DVH was less than 1% for all tissues through the comparison of MC distributions performed in the two simplified phantoms considering water. Additionally, MC dose distributions were compared with the predictions from an Eclipse treatment planning system (TPS), which employed a pencil beam convolution (PBC) algorithm with Modified Batho Power Law heterogeneity correction. Eclipse PBC and MC calculations (conventional and simplified phantoms) agreed well (<1%) for soft tissues. For femoral heads, differences up to 3% were observed between the DVH for Eclipse PBC and MC calculated in conventional phantoms. The use of the CT conversion ramp of water with variable densities for MC simulations showed no dose discrepancies (0.5%) with the PBC algorithm. Moreover, converting Dm to Dw using mass stopping power ratios resulted in a significant shift (up to 6%) in the DVH for the femoral heads compared to the Eclipse PBC one. Our results show that, for prostate IMRT plans delivered with 6 MV photon beams, no conversion of MC dose from medium to water using stopping power ratio is needed. In contrast, MC dose calculations using water with variable density may be a simple way to solve the problem found using the dose conversion method based on the stopping power ratio.

Early patterns of recovery from disturbance in intertidal algal assemblages: consistency across regions within a marine province

The importance of disturbance and the subsequent rate and pattern of recovery has been long recognised as an important driver of community structure. Community recovery is affected by processes operating at local and regional scales yet the examination of community level responses to a standardised disturbance at regional scales (i.e. among regions under different environmental conditions) has seldom been attempted. Here, we mechanically disturbed rocky intertidal lower shore algal dominated assemblages at three locations within each of three different regions within the Lusitanian biogeographical province (Azores, northern Portugal and the Canary Islands). All organisms were cleared from experimental plots and succession followed over a period of 12 months at which time we formally compared the assemblage structure to that of unmanipulated controls. Early patterns of recovery of disturbed communities varied among regions and was positively influenced by temperature, but not by regional species richness. Different components of the assemblage responded differently to disturbance. Regional differences in the relative abundance and identity of species had a key influence on the overall assemblage recovery. This study highlights how regional-scales differences in environmental conditions and species pool are important determinants of recovery of disturbed communities.